Cirrus Logic Inc.

WM8903CLGEFK - 24-Bit Stereo Audio Codec | Cirrus Logic

MPN: WM8903CLGEFK ✓ Aktif
40-QFN (5 x 5 mm) Package
MOQ: 1 |

WM8903CLGEFK Genel Bakış

Cirrus Logic WM8903CLGEFK is a 24-bit stereo audio codec with 2 ADC channels, 2 DAC channels, and a 40-pin QFN package measuring 5 x 5 mm. Designed as an ultra-low-power, high-fidelity audio interface, it supports portable-audio signal conversion while combining microphone capture, headphone or line output, and digital audio interfacing in one compact device.

An audio codec is a mixed-signal semiconductor that converts between digital audio data and analog microphone, line, or headphone signals. Within the signal-chain hierarchy, a codec sits between an audio source, such as a microphone or line input, and a digital audio bus such as I2S or I2C. The WM8903 therefore belongs to the broader audio interface IC and low-power mixed-signal semiconductor category.

The device provides 24-bit stereo conversion through two ADC and two DAC channels. This 24-bit format allows capture and playback systems to retain substantially more signal detail than conventional 16-bit consumer audio interfaces. Its ultra-low-power design focus makes it appropriate for portable equipment where battery life, heat, and board area constrain the audio subsystem.

The WM8903CLGEFK combines stereo analog conversion, digital audio control, and integrated audio processing in a 40-QFN package. Its 5 x 5 mm footprint supports compact layouts, while the exposed-pad package enables direct thermal coupling to the PCB when the device dissipation requires it. The package's exposed pad must be connected according to the manufacturer layout guidance rather than treated as an unused pin.

Typical uses include portable media players, smart phones, tablets, connected personal audio products, and other battery-powered systems that require microphone capture and low-noise stereo playback. The same device can also serve compact embedded audio platforms where one codec must support analog recording, headphone output, digital bus communication, and programmable audio routing.

PCB design should prioritize short, symmetric analog paths between external audio connectors, microphone circuitry, and the codec. Input and output bypass capacitors should be placed close to their associated pins, while digital clock, data, and control traces should remain isolated from sensitive analog nodes. Confirm pin orientation, exposed-pad connections, supply sequencing, and supported digital audio formats against the manufacturer datasheet before release.

This page combines the device's confirmed stereo codec, 24-bit conversion, 40-QFN packaging, and low-power positioning with practical guidance for layout, sourcing, and qualification. It also distinguishes the confirmed WM8903CLGEFK/R listing from true drop-in alternatives, preventing packaging-code changes from being presented as different engineering solutions.

Drop-in alternatifler için WM8903CLGEFK — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

WM8903CLGEFK/R

✅ Yerleştirme
📦 40-QFN (5 x 5 mm)
Electrical ratings are listed identically at 24-bit resolution, 2 ADC channels, 2 DAC channels, and 40-QFN packaging; only the order-code suffix differs, with no quantified electrical change shown

📋 Katalogda Olmayan Referans Alternatifi

WM8903CLGEFK Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type Stereo audio codec
ADC Resolution 24 bit
ADC Channels 2 channels
DAC Resolution 24 bit
DAC Channels 2 channels
Paket 40-QFN (5 x 5 mm)
Total Pins 40 pins
Exposed Pad Yes
Montaj Türü Surface mount
Power Class Ultra-low-power
Audio Class High-fidelity stereo audio
Target Application Portable audio applications
İşletim Sıcaklığı -40 °C to +85 °C

WM8903CLGEFK 40-qfn (5 x 5 mm) Pin Yapısı Kılavuzu

WM8903CLGEFK (40-qfn (5 x 5 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

40-qfn (5 x 5 mm) paket pin çizelgesi için WM8903CLGEFK

Ayrıntılı pin çıkış verisi mevcut değil: WM8903CLGEFK.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

WM8903CLGEFK için uygundur 6 uygulamas: Portable Media Player, Smartphone and Tablet Audio, Bluetooth Headset, Portable Gaming Audio, Smart Speaker, Digital Audio Accessory.

📱

Portable Media Player

The WM8903CLGEFK fits portable media players that combine stereo recording and playback in a compact board area. Its 24-bit conversion, 2-ADC/2-DAC topology, and ultra-low-power positioning address both signal resolution and battery-sensitive operation. Place the codec between the analog headphone or line-output stage and the digital audio controller, then use local bypass capacitors and controlled ground return paths. The 40-QFN package measures 5 x 5 mm, allowing it to sit close to the audio connector and reduce sensitive analog trace length. Designers should verify sample-rate limits, clock requirements, supply voltage, and active current against the manufacturer datasheet before fixing the system power budget and audio-clock architecture.

📱

Smartphone and Tablet Audio

The WM8903CLGEFK is suited to compact mobile-device audio subsystems requiring stereo microphone capture and headphone playback. The 24-bit ADC and DAC channels provide a higher-resolution interface than 16-bit audio paths, while the 5 x 5 mm 40-QFN package helps preserve PCB area. It can sit between MEMS microphones or a line input and an application processor supporting the required digital audio interface. Layout priority should be separating microphone signals from display, switching-converter, and high-speed digital returns. Use the manufacturer reference circuit to select bypass capacitance, clocking, and exposed-pad thermal-via arrangements, and confirm that the system can support the codec’s required sample rates and low-power control states.

🎧

Bluetooth Headset

A wireless headset can use the WM8903CLGEFK for analog microphone capture and stereo audio playback. Its ultra-low-power design focus is valuable in battery-constrained wearables, while the 2-ADC/2-DAC architecture allows the codec to serve both voice input and music output. Position the codec near the headset connector or microphone array and keep the analog paths short and symmetric. Digital audio data can then pass to a wireless audio SoC through a compatible serial interface, subject to the datasheet-supported formats. Verify clock accuracy, microphone biasing, headphone-output loading, and power-state requirements in the reference design. The exposed pad should follow the manufacturer’s thermal and electrical land-pattern guidance.

⚡

Portable Gaming Audio

The WM8903CLGEFK can support portable game consoles and handheld entertainment devices that require simultaneous game-audio playback, voice capture, or line-level accessory input. The stereo 24-bit ADC and DAC channels provide a unified analog interface for the system, and the compact 40-QFN footprint reduces routing congestion around dense display and processing components. Keep analog input and output sections away from switching regulators and fast digital clock lines, and provide local supply bypassing at the codec pins. Firmware should use the supported power-saving modes to reduce consumption when audio is inactive. Before implementation, confirm the maximum supported sample rate, digital bus timing, headphone or line-output limits, and exposed-pad connection directly from the manufacturer documentation.

🧩

Smart Speaker

The WM8903CLGEFK is applicable to connected audio products that combine voice capture with stereo music playback. Its 2 ADC channels can serve microphone or line-in duties, while the 2 DAC channels support stereo audio delivery to a downstream amplifier or codec network. The ultra-low-power design can help manage energy use in mains-powered products that also operate in low-power states. Place the codec near the analog input and output circuitry, maintain a quiet ground reference for microphone signals, and isolate digital control traffic from high-impedance analog nodes. A system integrator should verify digital interface format, sample-rate support, clock jitter tolerance, and analog output loading. The 5 x 5 mm QFN package also supports compact multi-function enclosures without requiring a board-edge expansion.

🔧

Digital Audio Accessory

The WM8903CLGEFK can serve as the analog conversion element in a USB, network, or wireless digital-audio accessory. The 24-bit ADC and DAC channels provide a consistent interface between external analog connectors and a digital audio controller, making the codec useful in headphone interfaces, speaker adapters, and compact home-audio nodes. Place analog connectors, protection devices, and the codec within the same localized signal section to minimize susceptibility to digital coupling. Use the manufacturer reference schematic to determine bypass capacitance and output-network values, and follow the recommended exposed-pad via arrangement for manufacturability and thermal performance. Firmware and hardware validation should cover supported sample rates, serial-audio timing, mute behavior, and power sequencing before production release.

What is the WM8903CLGEFK?
The WM8903CLGEFK is a Cirrus Logic ultra-low-power, high-fidelity stereo audio codec with 2 ADC channels, 2 DAC channels, 24-bit conversion, and a 40-QFN package measuring 5 x 5 mm. According to the manufacturer datasheet, it integrates analog-to-digital and digital-to-analog conversion for portable audio systems. Use it when an embedded product needs microphone capture and stereo playback in a compact, power-conscious package.
How many ADC and DAC channels does the WM8903CLGEFK have?
The WM8903CLGEFK provides 2 ADC channels and 2 DAC channels with 24-bit conversion resolution. The manufacturer datasheet identifies the device as a stereo audio interface and describes it as a 2-ADC/2-DAC codec. This configuration supports two-channel recording and playback, including microphone capture and stereo output in portable-audio products such as media players and connected personal-audio devices.
What package does the WM8903CLGEFK use?
The WM8903CLGEFK uses a 40-QFN package with body dimensions of 5 x 5 mm. The WM8903CLGEFK/R listing likewise identifies a 40-QFN stereo audio interface. Because a QFN package has no large exposed leads, follow the manufacturer pin table and land-pattern guidance when assigning PCB tracks. The exposed thermal pad is a package connection and must be handled according to the datasheet layout instructions.
Is the WM8903CLGEFK suitable for portable audio applications?
Yes, the WM8903CLGEFK is designed for ultra-low-power, high-fidelity portable audio applications. Its 2-ADC/2-DAC stereo architecture supports microphone capture and playback, while its 24-bit conversion provides high-resolution digital audio data. The 5 x 5 mm 40-QFN package also helps conserve board area in compact products. Confirm supply limits, clock requirements, and current consumption against the manufacturer datasheet for the intended operating mode.
Where can I download the WM8903CLGEFK datasheet PDF?
The WM8903CLGEFK datasheet PDF is available through the document link on this page and through the technical-document links listed for this codec. The manufacturer document is titled “Ultra Low Power CODEC for Portable Audio Applications.” Use the manufacturer's pin-description table, electrical characteristics, application circuit, and layout guidance as the controlling references for schematic capture and PCB implementation.
Where can I find the WM8903CLGEFK pinout?
The WM8903CLGEFK pinout is found in the pin-description table of the manufacturer datasheet. The package is a 40-QFN, so every package position from pin 1 through pin 40 must be assigned before schematic release. Use the table to identify analog inputs, analog outputs, digital audio signals, control interfaces, supply pins, ground pins, and the exposed pad rather than inferring pin functions from an image alone.
What is the difference between WM8903CLGEFK and WM8903CLGEFK/R?
The WM8903CLGEFK and WM8903CLGEFK/R are both listed as Cirrus Logic 24-bit stereo audio codecs in 40-QFN packages, with 2 ADC and 2 DAC channels. The visible distinction is the manufacturer ordering suffix, which commonly identifies the shipping format. Confirm the order code, reel or tube requirement, and exposed-pad definition in the manufacturer datasheet before treating the two order codes as electrically identical.
Is WM8903CLGEFK a drop-in replacement for WM8903CLGEFK/R?
The WM8903CLGEFK/R is the closest confirmed drop-in ordering candidate for the WM8903CLGEFK because both are listed as the same Cirrus Logic 24-bit stereo codec with 2 ADC channels, 2 DAC channels, and a 40-QFN package. Before substitution, verify the complete pin table, exposed-pad connection, supply limits, operating-temperature requirements, and the required reel or tube format. The suffix difference alone does not establish compatibility.
What can replace the WM8903CLGEFK?
The WM8903CLGEFK/R is a confirmed same-package replacement candidate because it is listed with the same 24-bit stereo codec, 2 ADC channels, 2 DAC channels, and 40-QFN package. No cross-brand part can be recommended confidently without a verified 40-pin pinout and matching electrical characteristics. Treat another codec as a true drop-in only after its complete pin map, digital interface, supply range, clocking, and exposed-pad requirements match.
Is there a cross-brand equivalent for the WM8903CLGEFK?
No cross-brand drop-in equivalent is established for the WM8903CLGEFK. A 40-QFN audio codec is not automatically interchangeable because pin assignments, digital audio interfaces, clock architecture, supply rails, and analog input topology can differ substantially between manufacturers. Request a board-specific replacement review through the Request a Quote form, including the PCB revision, required audio interfaces, sample rate, and analog connection diagram.
Where can I buy the WM8903CLGEFK?
Use the Request a Quote form on this page to request WM8903CLGEFK availability, lead time, and order confirmation. The form is the appropriate channel for exact-part sourcing and packaging requirements without relying on a stale static price. Include the required reel or tube format, quantity, destination, and target schedule when submitting the request so the manufacturer order code can be matched correctly.
What is the price of the WM8903CLGEFK?
Use the Request a Quote form on this page for the current WM8903CLGEKT price, lead time, and quantity availability. Static distributor prices can change with order quantity, packaging format, market conditions, and inventory status, so a current quotation provides the most useful commercial answer. Include your annual usage, forecast, and required shipment format in the request.
Is the WM8903CLGEFK in stock and what is its lead time?
Current stock and lead time for the WM8903CLGEFK should be confirmed through the Request a Quote form on this page. The part is offered in 40-QFN packaging, and the required order-code suffix can affect fulfillment conditions. State the quantity, target delivery date, and whether reel or tube packaging is required so the quotation can reflect the correct supply configuration.
What are the key specifications of WM8903CLGEFK that engineers should know?
The principal confirmed WM8903CLGEFK specifications are 24-bit stereo conversion, 2 ADC channels, 2 DAC channels, an ultra-low-power design, and a 40-QFN package measuring 5 x 5 mm. The device is positioned for high-fidelity portable audio. Supply voltage, maximum sample rate, clocking, signal-to-noise ratio, and detailed operating limits must be taken from the manufacturer datasheet before schematic or firmware design.
How should the WM8903CLGEFK be laid out on a PCB?
Place the WM8903CLGEFK close to the external audio connectors and analog support components, keep the exposed-pad layout compliant with the manufacturer recommendations, and place supply bypass capacitors near the relevant pins. Route digital clock, data, and control signals away from microphone and output analog paths. Use the datasheet reference schematic and layout guidance to establish guard spacing, grounding, decoupling, and exposed-pad thermal-via arrangements.

Mühendislik referans verileri: WM8903CLGEFK — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the WM8903CLGEFK when a compact portable-audio design needs a 24-bit stereo codec with 2 ADC channels, 2 DAC channels, and a 40-QFN footprint. The WM8903CLGEFK/R is the closest confirmed replacement candidate because its listed resolution, converter count, and package match the target; select it when its order-code suffix and required shipping format suit the production plan. No cross-brand drop-in replacement should be selected solely from the 40-QFN package designation, because digital interface selection, clocking, register programming, exposed-pad connections, and analog pin assignments can differ. For a new design, use the WM8903CLGEFK when its supply range, maximum sample rate, audio outputs, and digital interfaces satisfy the system requirements. For an existing PCB, compare the complete pin table and order code before substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün WM8903CLGEFK/R
Package 40-QFN (5 x 5 mm) 40-QFN (5 x 5 mm)
Brand Cirrus Logic Cirrus Logic
Product Type Stereo audio interface Stereo audio interface
ADC Channels 2 channels 2 channels
DAC Channels 2 channels 2 channels
Conversion Resolution 24 bit 24 bit
Power Class Ultra-low-power Ultra-low-power
Operating Temperature -40 °C to +85 °C -40 °C to +85 °C
Total Pins 40 pins 40 pins
Order-Code Suffix FK /R

Ana Farklılayıcılar

  • Matched stereo conversion architecture (karşılaştırma:WM8903CLGEFK/R)
  • Identical confirmed package format (karşılaştırma:WM8903CLGEFK/R)
  • Portable-audio power positioning (karşılaştırma:WM8903CLGEFK/R)

Tasarım Notları

Place the WM8903CLGEFK near the external audio connectors, microphone network, and analog output components so sensitive signals do not cross digital clock, data, or switching-supply routes. Keep microphone and line-input paths short and symmetrical, provide local bypass capacitance at the supply pins, and use a continuous quiet ground reference around the analog section. Apply the manufacturer’s exposed-pad land pattern and via arrangement during footprint creation.

Separate analog and digital return paths carefully because digital audio clocks and control signals can couple into high-impedance microphone inputs. Route clock and serial-data lines away from the codec’s analog pins, avoid sharing wide return segments between analog and digital circuits where possible, and validate the final board with an oscilloscope during audio activity. Confirm the supported digital audio format, sample rates, and clock requirements from the manufacturer datasheet before PCB release.

Do not assume that every 40-QFN stereo audio codec is pin-compatible with the WM8903CLGEFK. Before substituting another codec, compare all 40 pin positions, exposed-pad treatment, supply rails, ground pins, clock inputs, digital audio signals, control pins, and analog input topology. A package match alone does not establish drop-in compatibility, particularly for proprietary register maps or different digital interfaces.

Use the exposed pad as both a thermal and electrical connection according to the manufacturer layout instructions. Recommended thermal-via geometry should be implemented while observing manufacturing restrictions around via-in-pad processes and solder wicking. Thermal performance depends on the exposed-pad copper area, via count, board construction, ambient temperature, and codec dissipation, so validate the assembled design under worst-case audio-load and ambient conditions.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for WM8903CLGEFK. The operating-temperature range of -40 °C to +85 °C is associated with the listed WM8903CLGEFK/R ordering code.

İlgili Aramalar

WM8903CLGEFK datasheet WM8903CLGEFK pinout WM8903CLGEFK datasheet pdf WM8903CLGEFK equivalent WM8903CLGEFK replacement WM8903CLGEFK cross reference WM8903CLGEFK vs WM8903CLGEFK/R WM8903CLGEFK price WM8903CLGEFK stock Cirrus Logic WM8903CLGEFK WM8903CLGEFK 40-QFN WM8903CLGEFK 24-bit stereo codec WM8903CLGEFK portable audio WM8903CLGEFK application circuit

İlgili Bileşenler ve Terimler

Cirrus Logic Wolfson Microelectronics WM8903CLGEFK WM8903CLGEFK/R audio codec stereo audio interface mixed-signal IC analog-to-digital converter ADC digital-to-analog converter DAC 24-bit resolution 2 ADC channels 2 DAC channels ultra-low-power high-fidelity audio 40-QFN QFN package family 5 x 5 mm surface-mount package exposed thermal pad portable audio smartphone headset smart speaker audio amplifier
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle