WM8976CGEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic
部品番号: WM8976CGEFL/V ✗ 生産終了WM8976CGEFL/V 概要
An audio codec is an interface IC that converts digital audio samples into analog signals and analog sound into digital data. Within the electronics hierarchy, the WM8976CGEFL/V belongs to the audio codec class of interface ICs and ultimately provides system-level audio signal conditioning. It can support microphone input, headphone or line-level output, and direct speaker drive in a compact portable design, subject to the power, bandwidth, and thermal limits stated in the manufacturer datasheet.
The primary feature set includes a mono ADC, a stereo DAC, 24-bit digital audio operation, and support for both I2S and PCM data formats. The integrated speaker-driver function distinguishes the WM8976 from codec-only devices that require a separate analog amplifier. The 32-lead QFN package also provides a compact surface-mount footprint, while its exposed-pad construction helps transfer heat from the device into the PCB when the layout uses appropriate copper area.
The WM8976 architecture is intended to bridge a digital audio source and analog transducers. Digital audio data enters through the serial interface, while the DAC produces left and right analog outputs. The ADC captures a mono analog input for recording or monitoring. Speaker signals are amplified inside the codec, reducing the number of external circuit blocks required in portable equipment. Exact sample-rate limits, channel separation, signal-to-noise performance, speaker output power, and supported input formats must be confirmed against the manufacturer datasheet before a design is released.
Typical uses include portable media players, personal audio devices, portable speakers, smart audio accessories, and compact embedded systems with a digital audio host. In a portable player, the codec can accept serial audio from an application processor, provide analog outputs to a headset or line input, and drive a small speaker when its electrical limits suit the selected transducer. In a smart speaker or monitoring product, the mono ADC can support a microphone path while the stereo DAC feeds downstream amplification or line-level circuitry.
PCB implementation requires attention to exposed-pad soldering, analog and digital grounding, and separation of sensitive audio paths from switching circuitry. Place input, output, bypass, and compensation components according to the manufacturer reference layout, and provide a low-impedance ground return around the exposed pad. The speaker load and supply voltage must remain within the device limits, and filtering should be selected to meet the intended audio bandwidth without introducing excessive distortion or instability.
This product page combines the exact WM8976CGEFL/V ordering information, package identification, interface capabilities, sourcing guidance, and engineering-oriented integration notes. It also distinguishes the exact ordering code from packaging and sourcing variants so engineers can assess footprint, function, lifecycle, and replacement requirements before committing a design.
ドロップイン代替品: WM8976CGEFL/V — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストWM8976CGEFL/V 最大定格&電気的特性
| Product Type | Stereo audio codec with speaker driver |
| ADC Configuration | 1 mono channel |
| DAC Configuration | 2 stereo channels |
| Audio Resolution | 24 bit |
| Digital Audio Interfaces | I2S and PCM |
| Integrated Speaker Driver | Yes |
| Power Class | Low-power device for portable applications |
| パッケージ | 32-lead QFN |
| Package Dimensions | 5 x 5 mm |
| Package Construction | Exposed-pad QFN |
| 実装タイプ | Surface mount |
WM8976CGEFL/V exposed-pad qfn ピン配置ガイド
WM8976CGEFL/V (exposed-pad qfn パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: WM8976CGEFL/V.
詳細は データシート をご参照ください。
主な用途
WM8976CGEFL/V の用途: 6 件s: Portable Media Player, Portable Speaker, Headset and Earbud Interface, Smart Audio Accessory, Industrial Audio Module, Voice-Enabled Embedded System.
Portable Media Player
The WM8976CGEFL/V fits portable media-player designs that require a digital audio source, analog headphone output, and speaker playback in a compact circuit. Its 24-bit I2S or PCM interface connects to an application processor, while the mono ADC supports recording or monitoring and the stereo DAC supplies left and right analog outputs. The integrated speaker driver can reduce the component count when its load limits suit the selected transducer. Compared with a codec-only architecture, this consolidation frees board area and simplifies audio routing. Designers must still verify the required output level, speaker impedance, supply range, and sustained thermal performance against the manufacturer datasheet before selecting the speaker network.
おすすめ
Portable Speaker
The WM8976CGEFL/V is suitable for a compact portable speaker that receives digital playback audio and also needs a microphone or auxiliary analog input. The stereo DAC creates separate left and right outputs, while the integrated speaker driver handles a compatible transducer without requiring a separate output-amplifier IC. The mono ADC can serve a voice-capture or monitoring path, and the 5 x 5 mm QFN preserves space in a constrained enclosure. The principal engineering trade-off is output capability: speaker voltage, impedance, distortion, and thermal limits determine whether the integrated driver is adequate. The PCB should use a short speaker return path and the reference layout to reduce noise and unwanted coupling.
おすすめ
Headset and Earbud Interface
The WM8976CGEFL/V can provide the analog playback section for a wired headset or portable listening device. A digital audio processor streams 24-bit I2S or PCM samples into the codec, and the stereo DAC develops separate left and right analog outputs for the headphone or line-output network. Its low-power portable-audio positioning supports battery-operated equipment, while the integrated speaker driver offers a second playback option when required. Designers should confirm whether the available microphone amplifier and line-level paths match the headset architecture. Output-volume capability, distortion, channel balance, and click-and-pop behavior must be evaluated for the intended sensitivity and load, with decoupling and filtering placed according to the manufacturer reference design.
おすすめ
Smart Audio Accessory
The WM8976CGEFL/V fits a smart audio accessory that combines digital playback with a mono voice-input path. A host processor can send I2S or PCM audio to the stereo DAC, while the ADC captures a microphone signal for commands, calls, or environmental monitoring. Integrating the speaker driver can simplify portable products that need local audio playback without a separate amplifier IC. The 32-lead 5 x 5 mm QFN also allows a compact layout in a small enclosure, although exposed-pad soldering and thermal management remain essential. For voice applications, engineers must evaluate input noise, gain, sampling rate, microphone biasing, and analog grounding against the device's complete electrical characteristics before finalizing the analog front end.
おすすめ
Industrial Audio Module
The WM8976CGEFL/V can serve as the audio conversion block in a compact industrial audio module when its documented electrical limits fit the system. The 24-bit serial interface allows a controller to exchange I2S or PCM audio data, while the stereo DAC drives an analog output stage and the mono ADC supports a local monitoring input. Although the device is described for portable audio, it can be useful where component count, signal path integration, and a small 5 x 5 mm footprint are priorities. Industrial deployment still requires verification of the operating-temperature range, supply tolerance, ESD strategy, and long-term availability. Use a stable low-noise supply and keep the analog section isolated from motors, relays, and switching regulators.
おすすめ
Voice-Enabled Embedded System
The WM8976CGEFL/V is appropriate for voice-enabled embedded systems that need playback and a mono recording path in one device. The stereo DAC can feed a line-level or speaker-related output, while the mono ADC supplies digital samples for voice detection, monitoring, or basic recording. A host processor can select between I2S and PCM operation according to its audio architecture. The integrated speaker driver may reduce the footprint of a compact control panel or appliance, but output loading and thermal rise must be calculated for the selected speaker. Grounding and layout should preserve microphone signal integrity, while the exposed thermal pad requires a continuous ground and copper connection designed to spread heat without introducing excessive analog noise.
おすすめ
エンジニアリング参考データ: WM8976CGEFL/V — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 32-lead QFN, 5 x 5 mm |
| Brand | Cirrus Logic |
| Audio ADC | Mono ADC |
| Audio DAC | Stereo DAC |
| Audio Resolution | 24 bit |
| Digital Interface | I2S and PCM |
| Speaker Driver | Integrated |
| Target Application Class | Low-power portable audio |
主な差別化要因
- Combines conversion and speaker amplification in one codec (vs Conventional codec-only device)
- Supports both common digital audio serial formats (vs I2S-only codec)
- Compact mixed-signal integration (vs Discrete ADC, DAC, and speaker-driver implementation)
設計ノート
Follow the manufacturer reference layout for the 32-lead QFN, including the exposed-pad connection, bypass capacitors, and analog output routing. Keep the exposed pad connected to the designated ground plane and use uninterrupted copper to distribute heat. Place the shortest practical return from the speaker output to the device and prevent that current path from sharing sensitive microphone and DAC return segments.
Do not assume that the 24-bit interface guarantees a 24-bit signal chain. Clocking, source word length, supported sample rates, filtering, analog gain, and external component selection all affect the usable performance. Confirm the serial-audio timing and supported modes in the manufacturer datasheet, and verify that the connected speaker impedance and voltage remain within the speaker-driver limits.
Keep I2S or PCM clock and data routing compact and away from the microphone and analog output paths. Provide local bypass capacitance at the appropriate supply pins and maintain continuous ground references beneath the package. When the speaker driver operates at higher power, inspect the return-current path for ground bounce and separate speaker-current routing from the analog reference network.
Estimated thermal analysis requires the selected supply voltage, speaker load, output level, ambient temperature, and exposed-pad copper area; those values are not defined for this product. The 32-lead QFN exposed pad must be soldered according to the manufacturer land pattern, and a prototype should be checked at maximum sustained playback to determine whether additional copper or airflow is required.
コンプライアンス情報
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for the exact ordering code.