Cirrus Logic Inc.

WM8976CGEFL/V - 24-Bit Stereo Audio Codec | Cirrus Logic

MPN: WM8976CGEFL/V ✗ Tapus ng Buhay
32-lead QFN Package
MOQ: 1 |

WM8976CGEFL/V Ulas

Cirrus Logic WM8976CGEFL/V is a low-power stereo audio codec with a 24-bit I2S or PCM interface, a mono ADC, a stereo DAC, and an integrated speaker driver. The device is packaged in a 32-lead QFN measuring 5 x 5 mm and is positioned for portable audio equipment. Its combination of signal conversion and speaker amplification allows portable systems to use fewer external components while preserving a digital audio interface to a host processor.

An audio codec is an interface IC that converts digital audio samples into analog signals and analog sound into digital data. Within the electronics hierarchy, the WM8976CGEFL/V belongs to the audio codec class of interface ICs and ultimately provides system-level audio signal conditioning. It can support microphone input, headphone or line-level output, and direct speaker drive in a compact portable design, subject to the power, bandwidth, and thermal limits stated in the manufacturer datasheet.

The primary feature set includes a mono ADC, a stereo DAC, 24-bit digital audio operation, and support for both I2S and PCM data formats. The integrated speaker-driver function distinguishes the WM8976 from codec-only devices that require a separate analog amplifier. The 32-lead QFN package also provides a compact surface-mount footprint, while its exposed-pad construction helps transfer heat from the device into the PCB when the layout uses appropriate copper area.

The WM8976 architecture is intended to bridge a digital audio source and analog transducers. Digital audio data enters through the serial interface, while the DAC produces left and right analog outputs. The ADC captures a mono analog input for recording or monitoring. Speaker signals are amplified inside the codec, reducing the number of external circuit blocks required in portable equipment. Exact sample-rate limits, channel separation, signal-to-noise performance, speaker output power, and supported input formats must be confirmed against the manufacturer datasheet before a design is released.

Typical uses include portable media players, personal audio devices, portable speakers, smart audio accessories, and compact embedded systems with a digital audio host. In a portable player, the codec can accept serial audio from an application processor, provide analog outputs to a headset or line input, and drive a small speaker when its electrical limits suit the selected transducer. In a smart speaker or monitoring product, the mono ADC can support a microphone path while the stereo DAC feeds downstream amplification or line-level circuitry.

PCB implementation requires attention to exposed-pad soldering, analog and digital grounding, and separation of sensitive audio paths from switching circuitry. Place input, output, bypass, and compensation components according to the manufacturer reference layout, and provide a low-impedance ground return around the exposed pad. The speaker load and supply voltage must remain within the device limits, and filtering should be selected to meet the intended audio bandwidth without introducing excessive distortion or instability.

This product page combines the exact WM8976CGEFL/V ordering information, package identification, interface capabilities, sourcing guidance, and engineering-oriented integration notes. It also distinguishes the exact ordering code from packaging and sourcing variants so engineers can assess footprint, function, lifecycle, and replacement requirements before committing a design.

Mga alternatibo na pwedeng ilagay na WM8976CGEFL/V — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

WM8976CGEFL/V Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Stereo audio codec with speaker driver
ADC Configuration 1 mono channel
DAC Configuration 2 stereo channels
Audio Resolution 24 bit
Digital Audio Interfaces I2S and PCM
Integrated Speaker Driver Yes
Power Class Low-power device for portable applications
Packhaging 32-lead QFN
Package Dimensions 5 x 5 mm
Package Construction Exposed-pad QFN
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng WM8976CGEFL/V exposed-pad qfn

Pin configuration para sa WM8976CGEFL/V (exposed-pad qfn package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng exposed-pad qfn package para sa WM8976CGEFL/V

Wala ng detalyadong pinout data na magagamit para sa WM8976CGEFL/V.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

WM8976CGEFL/V ay nararapat para sa 6 aplikasyons: Portable Media Player, Portable Speaker, Headset and Earbud Interface, Smart Audio Accessory, Industrial Audio Module, Voice-Enabled Embedded System.

📱

Portable Media Player

The WM8976CGEFL/V fits portable media-player designs that require a digital audio source, analog headphone output, and speaker playback in a compact circuit. Its 24-bit I2S or PCM interface connects to an application processor, while the mono ADC supports recording or monitoring and the stereo DAC supplies left and right analog outputs. The integrated speaker driver can reduce the component count when its load limits suit the selected transducer. Compared with a codec-only architecture, this consolidation frees board area and simplifies audio routing. Designers must still verify the required output level, speaker impedance, supply range, and sustained thermal performance against the manufacturer datasheet before selecting the speaker network.

🔊

Portable Speaker

The WM8976CGEFL/V is suitable for a compact portable speaker that receives digital playback audio and also needs a microphone or auxiliary analog input. The stereo DAC creates separate left and right outputs, while the integrated speaker driver handles a compatible transducer without requiring a separate output-amplifier IC. The mono ADC can serve a voice-capture or monitoring path, and the 5 x 5 mm QFN preserves space in a constrained enclosure. The principal engineering trade-off is output capability: speaker voltage, impedance, distortion, and thermal limits determine whether the integrated driver is adequate. The PCB should use a short speaker return path and the reference layout to reduce noise and unwanted coupling.

🎧

Headset and Earbud Interface

The WM8976CGEFL/V can provide the analog playback section for a wired headset or portable listening device. A digital audio processor streams 24-bit I2S or PCM samples into the codec, and the stereo DAC develops separate left and right analog outputs for the headphone or line-output network. Its low-power portable-audio positioning supports battery-operated equipment, while the integrated speaker driver offers a second playback option when required. Designers should confirm whether the available microphone amplifier and line-level paths match the headset architecture. Output-volume capability, distortion, channel balance, and click-and-pop behavior must be evaluated for the intended sensitivity and load, with decoupling and filtering placed according to the manufacturer reference design.

🧩

Smart Audio Accessory

The WM8976CGEFL/V fits a smart audio accessory that combines digital playback with a mono voice-input path. A host processor can send I2S or PCM audio to the stereo DAC, while the ADC captures a microphone signal for commands, calls, or environmental monitoring. Integrating the speaker driver can simplify portable products that need local audio playback without a separate amplifier IC. The 32-lead 5 x 5 mm QFN also allows a compact layout in a small enclosure, although exposed-pad soldering and thermal management remain essential. For voice applications, engineers must evaluate input noise, gain, sampling rate, microphone biasing, and analog grounding against the device's complete electrical characteristics before finalizing the analog front end.

🏭

Industrial Audio Module

The WM8976CGEFL/V can serve as the audio conversion block in a compact industrial audio module when its documented electrical limits fit the system. The 24-bit serial interface allows a controller to exchange I2S or PCM audio data, while the stereo DAC drives an analog output stage and the mono ADC supports a local monitoring input. Although the device is described for portable audio, it can be useful where component count, signal path integration, and a small 5 x 5 mm footprint are priorities. Industrial deployment still requires verification of the operating-temperature range, supply tolerance, ESD strategy, and long-term availability. Use a stable low-noise supply and keep the analog section isolated from motors, relays, and switching regulators.

⚡

Voice-Enabled Embedded System

The WM8976CGEFL/V is appropriate for voice-enabled embedded systems that need playback and a mono recording path in one device. The stereo DAC can feed a line-level or speaker-related output, while the mono ADC supplies digital samples for voice detection, monitoring, or basic recording. A host processor can select between I2S and PCM operation according to its audio architecture. The integrated speaker driver may reduce the footprint of a compact control panel or appliance, but output loading and thermal rise must be calculated for the selected speaker. Grounding and layout should preserve microphone signal integrity, while the exposed thermal pad requires a continuous ground and copper connection designed to spread heat without introducing excessive analog noise.

What is the WM8976CGEFL/V?
The WM8976CGEFL/V is a low-power stereo audio codec with a 24-bit I2S or PCM interface, a mono ADC, a stereo DAC, and an integrated speaker driver. According to the Cirrus Logic manufacturer datasheet, it combines analog-to-digital conversion, digital-to-digital conversion, and speaker amplification in a 32-lead 5 x 5 mm QFN package for portable audio systems.
What are the key specifications of WM8976CGEFL/V that engineers should know?
The WM8976CGEFL/V provides a 24-bit audio interface supporting I2S and PCM, one mono ADC channel, two stereo DAC channels, and an integrated speaker driver. The Cirrus Logic manufacturer datasheet identifies a low-power portable-audio design in a 32-lead QFN package measuring 5 x 5 mm. Supply limits, sample rate, SNR, speaker output power, and operating temperature should be taken directly from the datasheet before design release.
Where can I download the WM8976CGEFL/V datasheet PDF?
The WM8976CGEFL/V datasheet PDF can be downloaded from the official-document link listed on this page, with an additional archived copy available from DiGi Electronics. The manufacturer datasheet is the controlling source for the complete 32-pin assignment, electrical limits, application circuit, timing data, and recommended PCB layout.
Where is the WM8976CGEFL/V pinout?
The WM8976CGEFL/V pinout is documented in the pin-description table of the Cirrus Logic manufacturer datasheet. The exact ordering code uses a 32-lead QFN with an exposed pad, so all 32 lead positions and the exposed thermal connection must be checked during schematic capture and PCB layout. Use the datasheet pin table rather than a generic 32-QFN diagram when assigning signals.
What is the difference between WM8976CGEFL/V and WM8976CGEFL/RV?
WM8976CGEFL/V and WM8976CGEFL/RV identify the same WM8976 device family with different order or packing codes. The WM8976CGEFL/V listing is associated with a 32-lead QFN codec containing the 24-bit I2S/PCM interface, mono ADC, stereo DAC, and speaker driver. Confirm the reel orientation, packing form, exposed-pad treatment, and manufacturer ordering code before treating the suffix as interchangeable.
Is the WM8976CGEFL/V suitable for portable audio applications?
Yes, the WM8976CGEFL/V is specifically described as a low-power, high-quality codec designed for portable applications. Its integrated mono ADC, stereo DAC, digital I2S/PCM interface, and speaker driver consolidate several audio functions into one 5 x 5 mm QFN device. The actual battery-life impact depends on supply voltage, sample rate, output level, speaker impedance, and operating mode.
What can replace the WM8976CGEFL/V on the same PCB?
A true drop-in replacement must use the same 32-lead QFN footprint, provide the same I2S and PCM interface, and match the ADC, DAC, speaker-driver, electrical, and software requirements. No independently verified drop-in replacement is identified for the exact WM8976CGEFL/V ordering code. Use the Request a Quote form on this page for sourcing support rather than assuming a similar codec is pin-compatible.
When should I choose WM8976CGEFL/V instead of a codec without a speaker driver?
Choose the WM8976CGEFL/V when a compact portable design needs digital audio input, analog recording, stereo playback, and direct speaker drive in one package. A codec without an integrated speaker driver may provide lower speaker-output power or different thermal characteristics, but it normally requires an external amplifier. Select based on the complete load, supply, output-level, distortion, and thermal requirements.
Is WM8976CGEFL/V suitable for a portable speaker?
The WM8976CGEFL/V fits portable-speaker concepts that require a mono microphone path and stereo digital-audio playback. Its integrated speaker driver can reduce the external component count, but the connected speaker must remain within the datasheet's voltage, impedance, power, and distortion limits. Check thermal rise and acoustic headroom at the highest sustained output level.
Where to buy WM8976CGEFL/V online?
Use the Request a Quote form on this page to request availability, current lead time, minimum order quantity, and order confirmation for the exact WM8976CGEFL/V code. The form supports component sourcing without relying on a static listing price. Include your required quantity, packaging preference, target date, and assembly schedule so the supply response can be matched to the build schedule.
What is the price of WM8976CGEFL/V?
The current price of WM8976CGEFL/V is generated through the XAIPART Request a Quote form rather than displayed as a fixed catalog amount. Submit the required quantity and packaging details on this page to obtain a current quotation. The quote process also allows confirmation of lead time, stock status, traceability requirements, and delivery timing for the exact ordering code.
What is the lead time for WM8976CGEFL/V?
The lead time for WM8976CGEFL/V depends on current inventory, package format, order quantity, and manufacturing status. Request the current lead time through the Request a Quote form on this page and include the required quantity, date code preference, and target delivery date. A confirmed schedule should be used before committing the product to a production release.
Is WM8976CGEFL/V in stock?
Stock for WM8976CGEFL/V changes with order volume and package requirements, so current availability should be confirmed through the Request a Quote form on this page. Include your required quantity, reel or tray preference, date-code constraints, and ship-to region. The quotation response provides the most appropriate confirmation for production planning.
How does the WM8976CGEFL/V support digital and analog audio?
The WM8976CGEFL/V accepts digital audio through its 24-bit I2S or PCM interface, converts mono analog input with the ADC, and provides stereo analog output through the DAC. It also includes a speaker driver for direct transducer excitation. According to the Cirrus Logic manufacturer datasheet, this combination provides a compact signal path from a digital audio host to analog and speaker outputs.
What PCB layout considerations apply to WM8976CGEFL/V?
The WM8976CGEFL/V layout must follow the manufacturer reference circuit because its 32-lead QFN includes an exposed pad and sensitive analog audio paths. Keep the exposed-pad connection, ground return, bypass capacitors, and audio traces compact, and maintain separation from switching nodes and high-current speaker return paths. Apply the datasheet's recommended component values and thermal-copper guidance.

Impormasyon ng Talumpati sa Engineering for WM8976CGEFL/V — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the WM8976CGEFL/V when the design needs a compact audio subsystem combining a mono ADC, a stereo DAC, 24-bit I2S or PCM communication, and direct speaker drive. It is especially useful in portable products where reducing the number of analog and mixed-signal components is more important than using a codec with only recording or playback functions. Verify the speaker impedance, output level, distortion target, supply range, sample-rate requirements, and thermal conditions before committing to the integrated driver. A codec without a speaker driver may be preferable when a separate amplifier can provide greater output power, more flexible gain control, or a different load capability. No drop-in replacement is established for the exact ordering code, so an alternative should be accepted only after its 32-lead footprint, pin functions, interface timing, electrical limits, and software-control requirements have been compared.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 32-lead QFN, 5 x 5 mm
Brand Cirrus Logic
Audio ADC Mono ADC
Audio DAC Stereo DAC
Audio Resolution 24 bit
Digital Interface I2S and PCM
Speaker Driver Integrated
Target Application Class Low-power portable audio

Pangunahing mga Pagkakaiba

  • Combines conversion and speaker amplification in one codec (kumpara saConventional codec-only device)
  • Supports both common digital audio serial formats (kumpara saI2S-only codec)
  • Compact mixed-signal integration (kumpara saDiscrete ADC, DAC, and speaker-driver implementation)

Talaan ng Disenyo

Follow the manufacturer reference layout for the 32-lead QFN, including the exposed-pad connection, bypass capacitors, and analog output routing. Keep the exposed pad connected to the designated ground plane and use uninterrupted copper to distribute heat. Place the shortest practical return from the speaker output to the device and prevent that current path from sharing sensitive microphone and DAC return segments.

Do not assume that the 24-bit interface guarantees a 24-bit signal chain. Clocking, source word length, supported sample rates, filtering, analog gain, and external component selection all affect the usable performance. Confirm the serial-audio timing and supported modes in the manufacturer datasheet, and verify that the connected speaker impedance and voltage remain within the speaker-driver limits.

Keep I2S or PCM clock and data routing compact and away from the microphone and analog output paths. Provide local bypass capacitance at the appropriate supply pins and maintain continuous ground references beneath the package. When the speaker driver operates at higher power, inspect the return-current path for ground bounce and separate speaker-current routing from the analog reference network.

Estimated thermal analysis requires the selected supply voltage, speaker load, output level, ambient temperature, and exposed-pad copper area; those values are not defined for this product. The 32-lead QFN exposed pad must be soldered according to the manufacturer land pattern, and a prototype should be checked at maximum sustained playback to determine whether additional copper or airflow is required.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status is stated for the exact ordering code.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

WM8976CGEFL/V datasheet WM8976CGEFL/V pinout WM8976CGEFL/V datasheet pdf WM8976CGEFL/V equivalent WM8976CGEFL/V replacement WM8976CGEFL/V cross reference WM8976CGEFL/V footprint WM8976CGEFL/V application circuit WM8976CGEFL/V price WM8976CGEFL/V stock Cirrus Logic WM8976CGEFL/V WM8976 24 bit stereo codec

Mga kaugnay na Mga Komponente at mga Tuntunin

Cirrus Logic WM8976CGEFL/V WM8976CGEFL/RV Wolfson Microelectronics stereo audio codec audio codec interface IC mixed-signal IC semiconductor mono ADC stereo DAC 24-bit audio I2S PCM integrated speaker driver portable audio QFN-32 QFN family surface mount SMD exposed pad analog-to-digital conversion digital-to-analog conversion speaker output
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ