XC2C256-6PQ208C - 256-Macrocell 5.7 ns CPLD | AMD
部品番号: XC2C256-6PQ208C ✓ 生産中XC2C256-6PQ208C 概要
A complex programmable logic device, or CPLD, is a user-programmable semiconductor that sits between fixed-function logic and an FPGA in design complexity. Logic is organized into macrocells connected by a programmable interconnect, allowing a design to be synthesized, placed, and routed into a deterministic hardware structure. The XC2C256 family therefore provides high I/O density and predictable performance without requiring a large external memory or a volatile configuration process during normal operation.
The CoolRunner-II device provides 256 macrocells, a 5.7 ns maximum pin-to-pin delay, and a low quiescent current of approximately 13 µA. Its architecture is optimized for 1.8 V systems and supports effective logic synthesis for designs requiring many I/O pins and moderate logic density. The 208-pin PQFP provides substantially more I/O resources than smaller CoolRunner-II packages, making the device suitable for designs that must consolidate several discrete glue-logic devices into one programmable component.
The -6 designation identifies the device speed grade associated with the stated maximum propagation delay. In a CPLD, propagation delay covers the complete path from an input through programmable logic and routing to an output. Designers should also evaluate setup and hold requirements, output skew, system clock tolerance, and the timing constraints generated for the actual logic implementation rather than treating the headline delay as a complete timing guarantee.
Typical uses include industrial automation, telecommunications interface conditioning, embedded system control, instrumentation, and general-purpose logic consolidation. The high pin count is especially useful for parallel data interfaces, legacy peripheral emulation, multi-bit bus arbitration, and control systems combining multiple asynchronous domains. The device can replace a collection of PAL, GAL, and small CPLD devices while retaining nonvolatile configuration and a deterministic interconnect structure.
Board design requires careful treatment of the 208-pin package and its numerous high-speed I/O paths. Follow the package outline, pin table, and recommended decoupling and layout guidance in AMD datasheet DS094. Confirm signal integrity, power-supply sequencing, unused-pin handling, and programming-system compatibility before release because a compatible physical footprint does not remove the need to validate system-level timing.
This product page combines the DS094 device specifications, exact package and speed-grade information, qualified same-footprint alternatives, application guidance, and practical design considerations. It supports faster engineering evaluation by separating confirmed device attributes from parameters that require project-specific validation.
ドロップイン代替品: XC2C256-6PQ208C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC2C256-6PQ208C (同一形状・フットプリント) — 相違点: Device Type, Package, Quiescent Current, Process Technology, Speed Grade.
XC2C256-7PQ208C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C256-7PQ208I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C256-7PQG208C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC2C256-6PQG208C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC2C256-6PQ208C 最大定格&電気的特性
| Device Type | CoolRunner-II complex programmable logic device (CPLD) |
| Macrocell Count | 256 macrocells |
| Maximum Pin-to-Pin Propagation Delay | 5.7 ns |
| 静止電流 | 13 uA |
| Process Technology | 0.18 um CMOS |
| Optimized Supply Voltage | 1.8 V |
| Package Type | 208-pin plastic quad flat package |
| Package Code | PQ208 |
| Total Pin Count | 208 pins |
| Speed Grade | -6 |
| Temperature Grade | Commercial |
| 実装スタイル | Surface mount |
| Programmable Logic Architecture | 256-macrocell architecture with programmable interconnect |
XC2C256-6PQ208C pq208 ピン配置ガイド
XC2C256-6PQ208C (pq208 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC2C256-6PQ208C.
詳細は データシート をご参照ください。
主な用途
XC2C256-6PQ208C の用途: 6 件s: Industrial Automation Control, Telecommunications Interface Conditioning, Embedded System Bus Consolidation, Instrumentation Signal Conditioning, Protocol Conversion and Glue Logic, Programmable System Timing and Sequencing.
Industrial Automation Control
The XC2C256-6PQ208C fits industrial automation control because its 256 macrocells can consolidate substantial control logic while the 208-pin package provides numerous I/O resources. A designer can implement sequencing, interlocks, signal conditioning, counter and timer functions, and interface translation in one deterministic programmable device. The 5.7 ns maximum propagation-delay figure provides a useful initial timing target for control paths, although each compiled implementation must still satisfy its actual timing constraints. Its approximately 13 µA quiescent current is also beneficial in low-activity control sections where minimized standby consumption is valuable. The large PQFP package increases routing complexity, so power distribution, decoupling, and signal-integrity planning remain essential.
おすすめ
Telecommunications Interface Conditioning
The XC2C256-6PQ208C is suitable for telecommunications interface conditioning where parallel buses, framing logic, line-interface adaptation, and protocol-specific control must operate deterministically. Its 256 macrocells provide more logic capacity than a basic PAL while avoiding the routing complexity of a large FPGA design. The 5.7 ns maximum propagation-delay specification supports short synchronous control paths, and the 208 I/O positions allow multiple interfaces to share one package. In such designs, use a clock with defined jitter and edge requirements, constrain every asynchronous input, and validate output timing against the external interface standard. Package-level crosstalk and ground-return discipline are particularly important when many outputs change near the same time.
おすすめ
Embedded System Bus Consolidation
The XC2C256-6PQ208C can consolidate legacy embedded-system interfaces that would otherwise occupy several fixed-function logic devices. Its 256 macrocells support address decoding, arbitration, latch and register functions, interrupt control, and data-width conversion, while the 208-pin package exposes enough pins for several buses and discrete control signals. The -6 grade offers a stated 5.7 ns maximum pin-to-pin delay for short combinational paths, but bus timing must be evaluated using the exact clock period, skew, setup, and hold values. Engineers should also verify programming-file portability, unused-pin treatment, and I/O voltage compatibility before production release. This consolidation approach can simplify a legacy interface section without introducing a large FPGA's power and configuration complexity.
おすすめ
Instrumentation Signal Conditioning
The XC2C256-6PQ208C is well matched to instrumentation front ends that require programmable gain-control logic, trigger coordination, status encoding, and test-point multiplexing. The 256 macrocells provide enough capacity to combine several control blocks, and the 208-pin package accommodates both measurement inputs and system-facing outputs. Its deterministic interconnect is useful when repeatable behavior and stable logic density matter more than the flexibility of a large FPGA. The 13 µA quiescent-current figure can help in portable or intermittently powered test instruments, although overall system demand depends on active logic and I/O loading. For sensitive analog interfaces, isolate the CPLD's digital return currents, use quiet supply references, and validate thresholds and timing at every analog-to-digital boundary.
おすすめ
Protocol Conversion and Glue Logic
The XC2C256-6PQ208C fits protocol-conversion and glue-logic tasks that combine parallel data, control signals, and asynchronous state machines. Its 256 macrocells permit several conversion functions to be implemented in a single device, while the 208-pin package minimizes the need to split interfaces across multiple packages. A 5.7 ns maximum pin-to-pin delay helps in short combinational conversions, but registered pipeline stages are usually preferable when meeting a higher external clock rate. Validate every output against the destination protocol's setup, hold, and skew requirements rather than relying only on the CPLD headline delay. Compact SOP-8 and SOP-14 companion devices can provide level translation or buffering where they offer compatible electrical interfaces.
おすすめ
Programmable System Timing and Sequencing
The XC2C256-6PQ208C is appropriate for programmable timing, sequencing, and event-control logic in industrial and communications equipment. Multiple counters, state machines, delayed triggers, pulse stretchers, and deterministic sequencing blocks can coexist in the 256-macrocell fabric. The 5.7 ns maximum propagation-delay value supports fast local logic, but asynchronous clock-domain crossings and long combinational routes need explicit architectural treatment. Use the implementation tool's timing report to locate critical paths and add registers where necessary. The device's low quiescent current can also benefit standby modes in supervisory circuitry, although clocking and I/O states must be controlled deliberately. Firmware-independent hardware sequencing is particularly useful where control behavior must remain deterministic immediately after power-up.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC2C256-6PQ208C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC2C256-7PQ208C | XC2C256-7PQ208I | XC2C256-7PQG208C | XC2C256-6PQG208C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 208-pin PQFP (PQ208) | 208-pin PQFP (PQ208) | 208-pin PQFP (PQ208) | 208-pin PQFP (PQ208) | 208-pin PQFP (PQ208) |
| Macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells | 256 macrocells |
| Speed Grade | -6 grade; 5.7 ns maximum pin-to-pin delay | -7 grade | -7 grade | -7 grade | -6 grade |
| Temperature Designation | Commercial | Commercial | Industrial | Commercial | Commercial |
| Process Technology | 0.18 um CMOS | 0.18 um CMOS | 0.18 um CMOS | 0.18 um CMOS | 0.18 um CMOS |
| Optimized Supply Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
主な差別化要因
- Retains the -6 speed grade while offering a closely related ordering option (vs XC2C256-7PQG208C)
- Commercial-grade ordering for designs not requiring the I temperature designation (vs XC2C256-7PQ208I)
- Combines high logic density with extensive package I/O (vs XC2C256-7VQ100C)
設計ノート
Treat the PQ208 footprint as a high-density, mixed-signal layout problem. Assign quiet supply and ground pins according to the pin table in AMD datasheet DS094, place local bypass capacitors close to their associated supply pins, and preserve continuous ground-plane coverage beneath the device. Route clocks away from high-fanout outputs and sensitive inputs. Because the package exposes many external I/O pins, a pin-assignment spreadsheet and constraint-driven layout review can prevent difficult routing problems late in the board design.
The 5.7 ns maximum pin-to-pin delay describes the speed grade, not a guarantee for every routing path. Review the post-fit timing report for each implemented path and add pipeline registers where setup, hold, skew, or clock-period constraints fail. Also evaluate simultaneous switching output noise, input threshold behavior, and external trace impedance. The 208-pin package provides substantial I/O flexibility, but using that flexibility without matching constraints can create timing and signal-integrity problems that the headline delay does not reveal.
Do not treat a similar CoolRunner-II ordering code as automatically interchangeable. Compare the speed grade, temperature grade, package suffix, supply requirements, timing limits, and programming-device compatibility before releasing a substitute. In particular, XC2C256-7PQ208C and XC2C256-7PQ208I differ from the target in their ordering characteristics, while the G-suffix variants require verification of lead-finish and ordering requirements. Preserve the original device marking and qualification records in production documentation.
コンプライアンス情報
The verified product information identifies a commercial-grade 208-pin PQFP device but does not explicitly establish the requested compliance or material-status fields. The G suffix in related ordering codes requires confirmation from the manufacturer before being treated as proof of lead-free status.