AMD

XC2C256-7PQG208C - 256-Macrocell 1.8V CPLD | AMD Xilinx

部品番号: XC2C256-7PQG208C ✗ 生産終了
1.7 V to 1.9 V Vdss As low as 13 µA Id 208-pin PQFP Package 152 MHz Speed
MOQ: 1 |

XC2C256-7PQG208C 概要

The AMD Xilinx XC2C256-7PQG208C is an in-system-programmable CoolRunner-II complex programmable logic device with 256 macrocells, 173 I/O pins, a 5.7 ns maximum pin-to-pin delay, and a 208-pin PQFP package. It operates from a 1.7 V to 1.9 V internal core supply and is optimized for 1.8 V systems.

A CPLD is a programmable semiconductor that combines multiple programmable logic blocks, embedded memory, and deterministic interconnect in one package. In the broader device hierarchy, a CPLD sits between discrete logic and FPGA devices: it provides deterministic timing, simple in-system programming, and a compact architecture for consolidating control, interface, and glue-logic functions. The CoolRunner-II architecture applies this approach in a 0.18 µm CMOS process designed to balance speed, density, and low power.

Key features include up to 6,000 logic gates, 256 macrocells, 173 available I/O pins, and a maximum pin-to-pin delay of 5.7 ns. The device supports in-system programming and can reach a system frequency of 152 MHz according to the manufacturer family documentation. A quiescent current as low as 13 µA supports designs where standby power is important. The -7 suffix denotes the 5.7 ns speed grade, while PQG208 identifies the lead-free 208-pin package configuration.

The CoolRunner-II architecture provides deterministic signal propagation through a global interconnect and locally programmable logic blocks. This makes the device useful where predictable timing, nonvolatile configuration retention, and fast design iteration matter more than the very high logic density of an FPGA. System designers can consolidate parallel logic, control decoding, interface translation, and state-machine functions into one programmable device rather than using multiple fixed-function components.

Typical uses include industrial control, communications interfaces, portable instrumentation, embedded systems, peripheral bridging, and general-purpose logic consolidation. Its 173 I/O count is useful for designs requiring broad external connectivity, while its low quiescent current is advantageous in battery-influenced or intermittently powered equipment. The 1.8 V core target also supports compact systems designed around modern low-voltage logic rails.

When planning the PCB, reserve the programming interface, maintain the manufacturer's recommended power and decoupling arrangement, and verify every signal against the DS094 pin and package tables. A speed-grade change can alter timing closure even when the package remains unchanged, so system timing should be revalidated with the replacement speed grade and the actual board implementation.

This page combines the key CoolRunner-II operating characteristics, verified sourcing information, application guidance, and same-footprint replacement candidates to support faster device selection and PCB design. It also distinguishes genuine 208-pin drop-in options from smaller-package family members that cannot replace this part without layout changes.

ドロップイン代替品: XC2C256-7PQG208C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC2C256-7PQG208C (同一形状・フットプリント) — 相違点: Device Type, Package, Quiescent Current, Process Technology, Speed Grade.

AMD
Device Type: CoolRunner-II complex programmable logic device (CPLD)
Quiescent Current: 13 uA
Process Technology: 0.18 um CMOS
比較対象 XC2C256-7PQG208C →
AMD
Device Type: CPLD (Complex Programmable Logic Device)
Package: 208-pin PQFP (PQ208, FQFP, gull-wing)
Process Technology: 0.18 um CMOS
比較対象 XC2C256-7PQG208C →
AMD
Device Type: CPLD (Complex Programmable Logic Device)
Package: 208-pin PQFP (FQFP), square, gull-wing
Quiescent Current: 13 uA (as low as)
比較対象 XC2C256-7PQG208C →
Xilinx
Device Type: CoolRunner-II complex programmable logic device
Quiescent Current: 13 uA
Speed Grade: -7
比較対象 XC2C256-7PQG208C →

XC2C256-6PQG208C

✅ ドロップイン
📦 208-pin PQFP
Maximum pin-to-pin delay is 6.7 ns versus 5.7 ns, approximately 17% slower, while retaining 256 macrocells and the 1.7 V to 1.9 V supply range.

📋 参考代替品(カタログ未掲載)

XC2C256-7PQG208I

✅ ドロップイン
Xilinx
📦 208-pin PQFP
CoolRunner-II complex programmable logic device · 256 · 173 · In-system programmable · 1.8 V · 5.7 ns · 13 uA · 0.18 micron

価格はお問い合わせください

データシートを見る →

XC2C256-7PQ208C

✅ ドロップイン
AMD
📦 208-pin PQFP
XC2C256-7PQ208C · CoolRunner-II · CPLD (Complex Programmable Logic Device) · 256 · 6,000 · 152 MHz · -7 · 1.8 V nominal (1.7 V to 1.9 V)

価格はお問い合わせください

データシートを見る →

XC2C256-7PQ208I

✅ ドロップイン
AMD
📦 208-pin PQFP
AMD (Xilinx) · CoolRunner-II · CPLD (Complex Programmable Logic Device) · 256 · 6000 · -7 · 5.7 ns (min fast case per family features) · 6.7 ns

価格はお問い合わせください

データシートを見る →

XC2C256-6PQG208I

✅ ドロップイン ⚠️ 仕様未検証
📦 208-pin PQFP
Combines the 6.7 ns speed grade with the I temperature suffix, increasing the maximum pin-to-pin delay by 1.0 ns, or approximately 17%, versus the target.

📋 参考代替品(カタログ未掲載)

XC2C256-7PQG208C 最大定格&電気的特性

Device Type Complex Programmable Logic Device (CPLD)
Product Family CoolRunner-II
Number of Macrocells 256 macrocells
Equivalent Logic Gates Up to 6,000 gates
Number of I/O Pins 173 I/O
Supply Voltage Range 1.7 V to 1.9 V
Optimized Supply Voltage 1.8 V
Maximum Pin-to-Pin Delay 5.7 ns
Maximum System Frequency 152 MHz
Process Technology 0.18 µm CMOS
Programming Type In-System Programmable
静止電流 As low as 13 µA
パッケージ 208-pin PQFP
実装タイプ Surface Mount
Lead-Free Status Lead Free
RoHS ステータス RoHS Compliant

XC2C256-7PQG208C 208-pin pqfp ピン配置ガイド

XC2C256-7PQG208C (208-pin pqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC2C256-7PQG208C の 208-pin pqfp パッケージピン配置図

詳細なピン配置データはありません: XC2C256-7PQG208C.

詳細は データシート をご参照ください。

主な用途

XC2C256-7PQG208C の用途: 6 件s: Industrial Control Logic, Communications Interface Consolidation, Portable Instrumentation, Embedded Peripheral Bridging, Programmable Test and Measurement, Portable Power-Sequencing Controller.

🏭

Industrial Control Logic

The XC2C256-7PQG208C fits industrial control designs that require deterministic logic timing, broad I/O access, and a nonvolatile in-system-programmable device. Its 256 macrocells can consolidate motor-control sequencing, interlock logic, status decoding, and communication-interface glue into one 208-pin PQFP implementation. The 5.7 ns maximum pin-to-pin delay provides more timing margin than the 6.7 ns -6 speed grade, while the 1.7 V to 1.9 V core range targets 1.8 V system rails. Designers should still confirm the selected temperature grade, external interface voltage tolerances, and worst-case board timing for the deployed industrial environment.

🌐

Communications Interface Consolidation

The XC2C256-7PQG208C is suitable for consolidating protocol conversion, framing, parity, and data-routing logic in communications equipment. Its 173 user I/O pins provide substantial connectivity for parallel buses, control signals, and status indicators without requiring several smaller programmable devices. The 256-macrocell capacity supports moderately complex state machines, while the 5.7 ns speed grade helps minimize combinational delays in datapath logic. For a new communications platform, first verify that the obsolete family has sufficient planned availability and that the interface voltage, drive strength, and timing requirements match the target system.

📱

Portable Instrumentation

The XC2C256-7PQG208C can consolidate measurement sequencing, mode control, display decoding, and peripheral selection in compact portable instruments. Its family-level quiescent current can be as low as 13 µA, making it useful where inactive-state consumption matters, although actual current depends on configuration and I/O activity. The 173-I/O device offers enough external connectivity for sensor conditioning control and data-acquisition routing, and the 1.8 V core target simplifies integration with low-voltage mixed-signal systems. Validate analog-interface components separately because the CPLD manages digital control rather than precision analog conversion.

🧩

Embedded Peripheral Bridging

The XC2C256-7PQG208C is appropriate for bridging legacy parallel peripherals to a compact embedded control system. Its 256 macrocells can implement protocol translators, address decoding, arbitration, interrupt control, and test-mode sequencing, while 173 user I/O pins reduce the number of required glue-logic packages. The -7 grade's 5.7 ns maximum pin-to-pin delay supports faster logic paths than the 6.7 ns -6 alternative. Because this is a legacy programmable device, confirm configuration-file reproducibility, programming-tool support, and long-term component availability before starting a high-volume redesign.

🔧

Programmable Test and Measurement

The XC2C256-7PQG208C can implement sequencing, channel selection, trigger logic, and result-routing functions in programmable test equipment. Its 173 I/O pins allow it to connect directly to multiple instrument-control buses and status lines, while the in-system-programmable architecture enables reusable configurations across different tests. The deterministic 5.7 ns pin-to-pin timing is useful for tightly controlled digital test paths, but the device does not replace precision analog front ends. For laboratory equipment, verify supply sequencing, I/O standards, and thermal conditions across the intended operating range.

⚡

Portable Power-Sequencing Controller

The XC2C256-7PQG208C can implement battery-management sequencing, power-state arbitration, load-enable logic, and fault-latching functions in portable or intermittently powered systems. Its low quiescent-current capability is valuable when the system spends substantial time idle, and its 256 macrocells provide capacity for multiple power domains and supervisory paths. The 1.7 V to 1.9 V operating range supports a 1.8 V core architecture, while 173 I/O pins allow direct control of numerous enables and status inputs. The system designer must separately validate battery thresholds, load-switch behavior, fault response, and power-off current because those are system-level outcomes.

What are the key specifications of XC2C256-7PQG208C that engineers should know?
The XC2C256-7PQG208C is a 256-macrocell, 173-I/O CoolRunner-II CPLD with a 5.7 ns maximum pin-to-pin delay and a 1.7 V to 1.9 V core-supply range. It is packaged in a 208-pin PQFP and supports in-system programming. According to the AMD CoolRunner-II datasheet DS094, the family also supports up to 6,000 logic gates, a maximum system frequency of 152 MHz, and a process technology of 0.18 µm CMOS.
Where can I download the XC2C256-7PQG208C datasheet PDF?
The official XC2C256-7PQG208C datasheet is available through AMD at https://docs.amd.com/v/u/en-US/ds094. The document identifier is DS094, with release date 2007-03-07 and revision 3.2 as shown on the AMD document page. Use its device tables to confirm the 208-pin assignments, speed-grade characteristics, power requirements, and supported configuration methods before laying out or replacing the CPLD.
What is the XC2C256-7PQG208C and where is its pinout located?
The XC2C256-7PQG208C is a 1.8 V CoolRunner-II CPLD containing 256 macrocells and providing 173 user I/O pins in a 208-pin PQFP package. The pinout is documented in the AMD DS094 CoolRunner-II datasheet, including the package pin list and device-specific I/O information. Use that pin-description table when assigning PCB nets; the package also includes supply and ground pins, so the 173 user I/O figure is not the total number of physical leads.
Can the XC2C256-7PQG208C be used in industrial control systems?
The XC2C256-7PQG208C is suitable for many industrial-control logic functions because it combines 256 macrocells, 173 I/O pins, deterministic CPLD timing, and in-system programming. The AMD DS094 datasheet identifies a 5.7 ns maximum pin-to-pin delay for the -7 speed grade and a 1.7 V to 1.9 V operating range. For industrial equipment, also verify the exact temperature grade of the procured device and the environmental requirements of the finished system.
What is the difference between XC2C256-7PQG208C and XC2C256-6PQG208C?
The primary documented difference is speed grade: XC2C256-7PQG208C has a 5.7 ns maximum pin-to-pin delay, while XC2C256-6PQG208C has a 6.7 ns maximum delay. Both use 256 macrocells, a 1.7 V to 1.9 V internal supply range, and the 208-pin PQFP package. A -6 device may therefore fit the same footprint, but timing-critical paths must be rechecked because the slower grade provides about 1.0 ns less timing margin.
When should I choose XC2C256-7PQG208C over XC2C256-6PQG208C?
Choose the XC2C256-7PQG208C when the design has tighter timing requirements and benefits from the shorter 5.7 ns maximum pin-to-pin delay. The XC2C256-6PQG208C offers a 6.7 ns maximum delay and can be attractive when the slower timing grade is sufficient. Both provide 256 macrocells and use the same 208-pin PQFP footprint, so selection should be driven by the slowest required interface, setup margin, clock architecture, and complete board-level timing analysis.
Is XC2C256-7PQG208I a drop-in replacement for XC2C256-7PQG208C?
The XC2C256-7PQG208I is the same 208-pin PQFP CoolRunner-II configuration with the same 256-macrocell, 1.8 V, and 5.7 ns speed characteristics, making it a pin-compatible candidate. Its distinguishing suffix identifies a different temperature grade from the XC2C256-7PQG208C. Confirm that the I-grade temperature limits cover the intended operating environment, and verify configuration compatibility and sourcing requirements before production release.
What can replace XC2C256-7PQG208C without changing the PCB?
The closest documented drop-in candidates use the same 208-pin PQFP footprint: XC2C256-6PQG208C for a slower 6.7 ns grade, XC2C256-7PQG208I for an industrial-temperature configuration, XC2C256-7PQ208C for a non-G package finish, and XC2C256-7PQ208I for the corresponding industrial-temperature version. The smaller 100-pin, 132-pin, 144-pin, and 256-pin CoolRunner-II variants are not drop-in replacements because their footprints differ.
Is XC2C256-7PQG208C the same as XC2C256-7PQ208C?
The XC2C256-7PQG208C and XC2C256-7PQ208C use the same 208-pin PQFP family, 256-macrocell architecture, 1.8 V supply range, and -7 speed designation. Their package-finish coding differs, with the G version identified as lead-free and RoHS compliant. They are therefore mechanically and electrically close alternatives for the same board position, but procurement documentation should confirm the exact finish, temperature grade, lifecycle status, and configuration requirements.
Where can I buy XC2C256-7PQG208C and request current pricing?
Use the Request a Quote form on this page to request current XC2C256-7PQG208C pricing, stock confirmation, minimum order quantity, and lead time. The part is listed as an obsolete CoolRunner-II device in lifecycle discussions, so allocation can vary and obsolete inventory should not be treated as guaranteed production availability. Include the required quantity, date code policy, and certification needs in the request to obtain a complete sourcing response.
What is the lead time for XC2C256-7PQG208C?
The current lead time for XC2C256-7PQG208C should be requested through the Request a Quote form on this page. Because this CoolRunner-II device is an obsolete family member, lead time depends on remaining channel inventory, quantity, traceable stock, and date-code requirements. A confirmed allocation should be obtained before committing new production quantities, particularly for designs that require a specific package finish or temperature grade.
Is XC2C256-7PQG208C currently in stock?
Stock for XC2C256-7PQG208C must be confirmed through the Request a Quote form on this page. One current listing identifies an in-stock unit, but a single listing does not guarantee enough inventory for a production build or a particular delivery date. Request quantity-specific availability, traceability details, and lead time for the exact suffix before treating the component as available.
How much power does the XC2C256-7PQG208C consume?
The CoolRunner-II family documentation specifies quiescent current as low as 13 µA, while the XC2C256-7PQG208C itself operates from a 1.7 V to 1.9 V internal supply. Actual board consumption also depends on configuration, I/O activity, supply voltage, and switching frequency. Measure the programmed design rather than using the quiescent-current figure alone, and include I/O drive and external load losses when estimating system power.
What is the best AMD equivalent for XC2C256-7PQG208C?
The best same-footprint AMD alternatives depend on which requirement drives the substitution. XC2C256-6PQG208C preserves the 256-macrocell, 1.8 V, and 208-pin PQFP configuration but slows the maximum pin-to-pin delay from 5.7 ns to 6.7 ns. XC2C256-7PQG208I retains the 5.7 ns speed grade in the same package with an industrial-temperature suffix. No qualified cross-brand drop-in equivalent was established for this specific 208-pin design.
Is XC2C256-7PQG208C RoHS compliant and suitable for portable equipment?
The XC2C256-7PQG208C is identified as lead-free and RoHS compliant, and its family documentation lists quiescent current as low as 13 µA. Those characteristics support low-power portable equipment when the programmed I/O activity and supply load remain controlled. The device's obsolete lifecycle status should be considered for new portable-product programs, while its 1.7 V to 1.9 V supply range determines compatibility with the intended portable-device power architecture.

エンジニアリング参考データ: XC2C256-7PQG208C — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the XC2C256-7PQG208C when maintaining an existing 208-pin PQFP CoolRunner-II design and the tighter 5.7 ns speed grade provides useful timing margin, or when a lead-free G-finish part is required. The XC2C256-7PQG208I is the preferred same-footprint option when the I temperature grade is appropriate. Select XC2C256-6PQG208C or XC2C256-6PQG208I only after confirming that the 6.7 ns delay remains adequate for every timing path. The non-G XC2C256-7PQ208C and XC2C256-7PQ208I can fill mechanically compatible supply requirements when their finish and temperature characteristics are acceptable. Do not choose smaller CoolRunner-II packages as substitutes because their land patterns differ. For any new design, evaluate lifecycle risk and programming-tool support because the CoolRunner-II family is an obsolete platform.

代替品との比較

パラメータ この製品 XC2C256-6PQG208C XC2C256-7PQG208I XC2C256-7PQ208C XC2C256-7PQ208I XC2C256-6PQG208I
Brand AMD AMD AMD AMD AMD AMD
Package 208-pin PQFP 208-pin PQFP - same 208-pin PQFP - same 208-pin PQFP - same 208-pin PQFP - same 208-pin PQFP - same
Number of Macrocells 256 macrocells 256 macrocells 256 macrocells 256 macrocells 256 macrocells 256 macrocells
Number of I/O Pins 173 I/O 173 I/O 173 I/O 173 I/O 173 I/O 173 I/O
Internal Supply Range 1.7 V to 1.9 V 1.7 V to 1.9 V 1.7 V to 1.9 V 1.7 V to 1.9 V 1.7 V to 1.9 V 1.7 V to 1.9 V
Maximum Pin-to-Pin Delay 5.7 ns 6.7 ns 5.7 ns 5.7 ns 5.7 ns 6.7 ns
Programming Type In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable In-System Programmable
Temperature-Grade Suffix C C I C I I
Package Finish Designation G - Lead Free G - Lead Free G - Lead Free Non-G Non-G G - Lead Free

主な差別化要因

  • Faster documented pin-to-pin timing within the same footprint (vs XC2C256-6PQG208C)
  • Lead-free package configuration for environmentally constrained assemblies (vs XC2C256-7PQ208C)
  • Broad 173-pin user I/O access in a deterministic CPLD (vs XC2C256-7CPG132I)
  • Higher logic density than smaller same-family package options (vs XC2C256-7VQ100I)

設計ノート

Do not treat the -6 and -7 speed grades as automatically interchangeable. The XC2C256-6PQG208C has a 6.7 ns maximum pin-to-pin delay compared with 5.7 ns for the -7 device, a 1.0 ns reduction in available timing margin. Although the package is unchanged, review every clock-domain crossing, asynchronous input, output-interface constraint, and external-device setup-and-hold requirement before approving the slower replacement.

Use the AMD DS094 package drawing and pin-description tables when laying out the 208-pin PQFP footprint. The 173-I/O figure does not include power and ground leads, so the complete physical pin list must be used during schematic capture. Preserve the manufacturer's recommended supply decoupling, connect all specified ground pins, and route sensitive programming or configuration signals away from noisy switching nodes to reduce configuration reliability risks.

The documented operating range for the internal supply is 1.7 V to 1.9 V. Design the 1.8 V rail with tolerances and transient margin that keep the CPLD inside that range under startup, load, and supply-droop conditions. Quiescent current can be as low as 13 µA at the family level, but total consumption depends on the programmed logic, I/O switching, and external loads; power budgets should therefore use measured or configuration-specific estimates.

Smaller CoolRunner-II packages are not substitutes for this device even when their macrocell counts match. XC2C256 variants in 100-pin, 132-pin, 144-pin, and 256-pin packages have different footprints and I/O assignments. A drop-in replacement must retain the 208-pin PQFP land pattern and satisfy the required speed, temperature, supply, and configuration characteristics before PCB reuse is approved.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The part is identified as RoHS compliant and lead-free. REACH, halogen-free, and conflict-minerals status are not stated.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

xc2c256 7vqg100i xc2c256 7vqg100c xc2c256 7tqg144c xc2c256 7tqg144i xc2c256 7cpg132i xc2c256 7ftg256i xc2c256 6ftg256c xc2c256 7ftg256c XC2C256-7PQG208C datasheet XC2C256-7PQG208C pinout XC2C256-7PQG208C drop-in replacement XC2C256-7PQG208C vs XC2C256-6PQG208C AMD XC2C256-7PQG208C price XC2C256-7PQG208C stock XC2C256-7PQG208C 208-pin PQFP CPLD

関連部品&用語

AMD Xilinx XC2C256-7PQG208C XC2C256-6PQG208C XC2C256-7PQG208I XC2C256-7PQ208C XC2C256-7PQ208I XC2C256-6PQG208I CoolRunner-II CPLD complex programmable logic device FPGA in-system programmable 256 macrocells 173 I/O 0.18 µm CMOS 1.8 V 5.7 ns pin-to-pin delay 152 MHz system frequency 208-pin PQFP surface-mount package RoHS lead-free industrial control communications interface programmable logic
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示