XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD
部品番号: XC3S1000-5FG456C ✗ 生産終了XC3S1000-5FG456C 概要
An FPGA is a programmable semiconductor whose internal logic, routing, and I/O resources are configured after manufacture. Within the product hierarchy, this device is a field-programmable gate array, part of the broader class of programmable logic devices and integrated circuits. This architecture allows one board design to support multiple hardware functions, shorten development cycles, and support field upgrades through a programmable configuration bitstream.
The XC3S1000-5FG456C provides 17,280 logic elements distributed across 1,920 configurable logic blocks, with 7,680 adaptive logic modules and 432 embedded-memory bits identified for this device. Its 333 user I/O interfaces support communication with external processors, memory, converters, and industrial peripherals. A listed maximum clock frequency of 725 MHz describes a headline device capability; actual system performance still depends on the selected design, speed grade, clocking scheme, and timing constraints.
The device uses a low 1.2 V operating supply and 90 nm process technology. These characteristics place it in the Spartan-3 generation, which combined a large gate count with a cost-oriented architecture for volume embedded applications. Its ball-grid package concentrates a high pin count into a compact 23 mm by 23 mm square footprint while supporting a 1.00 mm terminal pitch.
Typical applications include industrial control, data acquisition, communications infrastructure, embedded instrumentation, video processing, and legacy platform control. The large I/O count is especially useful when a design must bridge multiple buses, capture parallel sensor data, or connect directly to high-speed external logic without requiring another programmable device.
For a new PCB layout, use the manufacturer pinout and package-mechanical guidance for the exact FG456 ball map. Existing designs should be checked for voltage, temperature, timing, configuration-interface, and pinout compatibility before substituting any speed- or temperature-grade variant. Configuration storage, clocking, decoupling, and signal-integrity requirements must also follow the Spartan-3 design guidance.
ドロップイン代替品: XC3S1000-5FG456C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC3S1000-5FG456C (同一形状・フットプリント) — 相違点: Package, Speed Grade.
XC3S1000-4FGG456C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC3S1000-4FG456I
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC3S1000-5FG456I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC3S1000-6FG456C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC3S1000-6FG456I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC3S1000-5FG456C 最大定格&電気的特性
| Device Type | Spartan-3 Field-Programmable Gate Array (FPGA) |
| System Gates | 1,000,000 gates |
| Logic Cells | 17,280 cells |
| Configurable Logic Blocks | 1,920 CLBs |
| Adaptive Logic Modules | 7,680 ALMs |
| Embedded Memory | 432 bits |
| User I/O | 333 interfaces |
| 最大クロック周波数 | 725 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| パッケージ | 456-ball FBGA, 23 mm x 23 mm |
| Terminal Pitch | 1.00 mm |
| Package Shape | Square |
| Terminal Type | Ball |
| Number of Terminals | 456 balls |
| Speed Grade | -5 |
| Temperature Grade | Commercial |
| 動作温度 | 0 C to 85 C |
| Lead-Free Status | Lead-free package |
XC3S1000-5FG456C square ピン配置ガイド
XC3S1000-5FG456C (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC3S1000-5FG456C.
詳細は データシート をご参照ください。
主な用途
XC3S1000-5FG456C の用途: 6 件s: Industrial PLC and Machine Control, Parallel Data Acquisition, Communications Interface Consolidation, Embedded Instrumentation Control, Video and Image Processing, Legacy Platform Control.
Industrial PLC and Machine Control
The XC3S1000-5FG456C fits industrial controller designs that combine sequential control, parallel sensing, communications, and motion-related logic in one programmable device. Its 17,280 logic cells provide substantial capacity for state machines, protocol handling, and safety interlocks, while 333 user I/O interfaces reduce the need for external I/O expanders. The 1.2 V core and 90 nm implementation suit compact control platforms designed around the Spartan-3 family. Because the listed device is commercial temperature, installations near heat-producing power stages require thermal design checks and appropriate operating-temperature margin.
おすすめ
Parallel Data Acquisition
The XC3S1000-5FG456C is appropriate for data-acquisition front ends that must collect parallel sensor data and perform filtering, buffering, triggering, or protocol conversion. The 333 user I/O interfaces allow high parallelism, while 7,680 adaptive logic modules and 432 embedded-memory bits support acquisition pipelines and control storage. A maximum listed clock frequency of 725 MHz provides a strong device-level figure, although converter, memory, and interface timing normally determine the achievable system rate. Signal integrity and clock jitter must therefore be evaluated separately from raw FPGA clock capability.
おすすめ
Communications Interface Consolidation
The XC3S1000-5FG456C can consolidate several serial and parallel communications interfaces into a compact FPGA implementation. Its large I/O count is useful for bridging legacy buses, translating data formats, adding framing logic, and buffering traffic between processors or converters. The 1,000,000-system-gate device provides enough parallel programmable logic to implement multiple interface engines concurrently, subject to resource-sharing and timing closure. Designers should reserve I/O for configuration functions and verify that each selected bank voltage supports the external interface standard.
おすすめ
Embedded Instrumentation Control
The XC3S1000-5FG456C is well suited to embedded instrumentation that must orchestrate converters, memories, displays, communications, and calibration logic. Seventeen thousand two hundred eighty logic cells allow the device to combine measurement sequencing with local control and data packaging, reducing discrete controller overhead. Its 333 I/O interfaces support direct connection to parallel instruments and test buses. The commercial temperature rating suits ambient-controlled equipment, but enclosure temperature, regulator dissipation, and board-level thermal gradients should be checked against the complete system specification.
おすすめ
Video and Image Processing
The XC3S1000-5FG456C can support embedded video timing, pixel formatting, lookup processing, and interface adaptation in compact image-processing modules. The 333 user I/O count is valuable for parallel pixel interfaces, while 7,680 adaptive logic modules provide parallel arithmetic and control capacity. The listed 725 MHz maximum clock does not by itself determine video throughput because pixel bus width, external memory latency, and timing closure constrain real throughput. Continuous video transfer also requires careful clocking, I/O-bank planning, and PCB signal-integrity control.
おすすめ
Legacy Platform Control
The XC3S1000-5FG456C can provide a focused upgrade path for legacy systems that need programmable control without changing an established board architecture. Existing Spartan-3 software, constraints, and bitstream workflows can be preserved when the device, package, speed grade, and temperature grade remain unchanged. The large I/O count supports peripheral replacement and board consolidation, while the compact 23 mm by 23 mm FBGA limits board area. Lifecycle planning should account for the device's obsolete status and require an explicit sourcing and quality plan before production use.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC3S1000-5FG456C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC3S1000-4FGG456C | XC3S1000-4FG456I | XC3S1000-5FG456I | XC3S1000-6FG456C | XC3S1000-6FG456I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA |
| Series | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| Speed Grade | -5 | -4 | -4 | -5 | -6 | -6 |
| Temperature Grade | Commercial | Commercial | Industrial | Industrial | Commercial | Industrial |
| System Gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates |
| Logic Cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells |
| User I/O | 333 interfaces | 333 interfaces | 333 interfaces | 333 interfaces | 333 interfaces | 333 interfaces |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主な差別化要因
- Provides balanced -5 timing performance and commercial-temperature operation in the 456-ball FBGA package. (vs XC3S1000-4FGG456C)
- Maintains the same -5 speed grade while supporting an expanded-temperature ordering option. (vs XC3S1000-5FG456I)
- Offers additional timing margin over the -5 target when the design and power budget support a faster grade. (vs XC3S1000-6FG456C)
設計ノート
Route the configuration interface and dedicated configuration pins exactly according to the manufacturer FG456 package drawing and Spartan-3 configuration guidance. The 1.00 mm ball pitch requires careful fan-out from the BGA to escape vias, and all 456 positions must be checked against the exact device pinout. Avoid relying on a generic BGA symbol because power, configuration, and user I/O assignments are package-specific.
Implement separate supply paths and local bypass capacitance for the core and any auxiliary I/O supplies according to the manufacturer power-supply recommendations. The device uses a 1.2 V core supply, and its programmable I/O banks may require other voltages. Place the closest high-frequency capacitors at their associated supply and ground balls, provide adequate return paths, and verify startup sequencing before configuration begins.
Budget external and on-chip clock jitter before treating the listed 725 MHz maximum as usable system performance. Use low-jitter clock sources, isolate noisy switching nodes from sensitive clock traces, and maintain continuous reference planes beneath high-speed routes. Re-run static timing analysis after any speed-grade substitution because the -4 and -6 alternatives change the timing margin available to each constraint.
Validate junction temperature and adjacent-board heat rise using the actual FPGA activity, switching rate, supply voltage, and ambient conditions. The commercial-temperature XC3S1000-5FG456C is specified from 0 C to 85 C, while the I-suffix alternatives address a broader temperature range. Spread logic activity where practical, use the package thermal data for the board stack-up, and avoid reducing airflow without recalculating enclosure temperatures.
コンプライアンス情報
The product listing identifies the device as lead-free. Exact RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification declarations were not stated for this ordering code.