XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD
料号: XC3S1000-5FG456C ✗ 停产XC3S1000-5FG456C 概述
An FPGA is a programmable semiconductor whose internal logic, routing, and I/O resources are configured after manufacture. Within the product hierarchy, this device is a field-programmable gate array, part of the broader class of programmable logic devices and integrated circuits. This architecture allows one board design to support multiple hardware functions, shorten development cycles, and support field upgrades through a programmable configuration bitstream.
The XC3S1000-5FG456C provides 17,280 logic elements distributed across 1,920 configurable logic blocks, with 7,680 adaptive logic modules and 432 embedded-memory bits identified for this device. Its 333 user I/O interfaces support communication with external processors, memory, converters, and industrial peripherals. A listed maximum clock frequency of 725 MHz describes a headline device capability; actual system performance still depends on the selected design, speed grade, clocking scheme, and timing constraints.
The device uses a low 1.2 V operating supply and 90 nm process technology. These characteristics place it in the Spartan-3 generation, which combined a large gate count with a cost-oriented architecture for volume embedded applications. Its ball-grid package concentrates a high pin count into a compact 23 mm by 23 mm square footprint while supporting a 1.00 mm terminal pitch.
Typical applications include industrial control, data acquisition, communications infrastructure, embedded instrumentation, video processing, and legacy platform control. The large I/O count is especially useful when a design must bridge multiple buses, capture parallel sensor data, or connect directly to high-speed external logic without requiring another programmable device.
For a new PCB layout, use the manufacturer pinout and package-mechanical guidance for the exact FG456 ball map. Existing designs should be checked for voltage, temperature, timing, configuration-interface, and pinout compatibility before substituting any speed- or temperature-grade variant. Configuration storage, clocking, decoupling, and signal-integrity requirements must also follow the Spartan-3 design guidance.
直接替换替代料: XC3S1000-5FG456C ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: XC3S1000-5FG456C (相同外形与封装尺寸) ——差异在于 Package, Speed Grade.
XC3S1000-4FGG456C
✅ 直接替换📋 参考替代料(不在目录中)
XC3S1000-4FG456I
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →XC3S1000-5FG456I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC3S1000-6FG456C
✅ 直接替换📋 参考替代料(不在目录中)
XC3S1000-6FG456I
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料(不在目录中)
XC3S1000-5FG456C 最大额定值与电气特性
| Device Type | Spartan-3 Field-Programmable Gate Array (FPGA) |
| System Gates | 1,000,000 gates |
| Logic Cells | 17,280 cells |
| Configurable Logic Blocks | 1,920 CLBs |
| Adaptive Logic Modules | 7,680 ALMs |
| Embedded Memory | 432 bits |
| User I/O | 333 interfaces |
| 最大时钟频率 | 725 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm |
| 封装 | 456-ball FBGA, 23 mm x 23 mm |
| Terminal Pitch | 1.00 mm |
| Package Shape | Square |
| Terminal Type | Ball |
| Number of Terminals | 456 balls |
| Speed Grade | -5 |
| Temperature Grade | Commercial |
| 工作温度 | 0 C to 85 C |
| Lead-Free Status | Lead-free package |
XC3S1000-5FG456C square 引脚配置指南
XC3S1000-5FG456C(square 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: XC3S1000-5FG456C.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XC3S1000-5FG456C 适用于 6 应用s: Industrial PLC and Machine Control, Parallel Data Acquisition, Communications Interface Consolidation, Embedded Instrumentation Control, Video and Image Processing, Legacy Platform Control.
Industrial PLC and Machine Control
The XC3S1000-5FG456C fits industrial controller designs that combine sequential control, parallel sensing, communications, and motion-related logic in one programmable device. Its 17,280 logic cells provide substantial capacity for state machines, protocol handling, and safety interlocks, while 333 user I/O interfaces reduce the need for external I/O expanders. The 1.2 V core and 90 nm implementation suit compact control platforms designed around the Spartan-3 family. Because the listed device is commercial temperature, installations near heat-producing power stages require thermal design checks and appropriate operating-temperature margin.
推荐
Parallel Data Acquisition
The XC3S1000-5FG456C is appropriate for data-acquisition front ends that must collect parallel sensor data and perform filtering, buffering, triggering, or protocol conversion. The 333 user I/O interfaces allow high parallelism, while 7,680 adaptive logic modules and 432 embedded-memory bits support acquisition pipelines and control storage. A maximum listed clock frequency of 725 MHz provides a strong device-level figure, although converter, memory, and interface timing normally determine the achievable system rate. Signal integrity and clock jitter must therefore be evaluated separately from raw FPGA clock capability.
推荐
Communications Interface Consolidation
The XC3S1000-5FG456C can consolidate several serial and parallel communications interfaces into a compact FPGA implementation. Its large I/O count is useful for bridging legacy buses, translating data formats, adding framing logic, and buffering traffic between processors or converters. The 1,000,000-system-gate device provides enough parallel programmable logic to implement multiple interface engines concurrently, subject to resource-sharing and timing closure. Designers should reserve I/O for configuration functions and verify that each selected bank voltage supports the external interface standard.
推荐
Embedded Instrumentation Control
The XC3S1000-5FG456C is well suited to embedded instrumentation that must orchestrate converters, memories, displays, communications, and calibration logic. Seventeen thousand two hundred eighty logic cells allow the device to combine measurement sequencing with local control and data packaging, reducing discrete controller overhead. Its 333 I/O interfaces support direct connection to parallel instruments and test buses. The commercial temperature rating suits ambient-controlled equipment, but enclosure temperature, regulator dissipation, and board-level thermal gradients should be checked against the complete system specification.
推荐
Video and Image Processing
The XC3S1000-5FG456C can support embedded video timing, pixel formatting, lookup processing, and interface adaptation in compact image-processing modules. The 333 user I/O count is valuable for parallel pixel interfaces, while 7,680 adaptive logic modules provide parallel arithmetic and control capacity. The listed 725 MHz maximum clock does not by itself determine video throughput because pixel bus width, external memory latency, and timing closure constrain real throughput. Continuous video transfer also requires careful clocking, I/O-bank planning, and PCB signal-integrity control.
推荐
Legacy Platform Control
The XC3S1000-5FG456C can provide a focused upgrade path for legacy systems that need programmable control without changing an established board architecture. Existing Spartan-3 software, constraints, and bitstream workflows can be preserved when the device, package, speed grade, and temperature grade remain unchanged. The large I/O count supports peripheral replacement and board consolidation, while the compact 23 mm by 23 mm FBGA limits board area. Lifecycle planning should account for the device's obsolete status and require an explicit sourcing and quality plan before production use.
推荐
推荐产品汇总
工程参考数据: XC3S1000-5FG456C ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XC3S1000-4FGG456C | XC3S1000-4FG456I | XC3S1000-5FG456I | XC3S1000-6FG456C | XC3S1000-6FG456I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA | 456-ball FBGA |
| Series | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 | Spartan-3 |
| Speed Grade | -5 | -4 | -4 | -5 | -6 | -6 |
| Temperature Grade | Commercial | Commercial | Industrial | Industrial | Commercial | Industrial |
| System Gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates | 1,000,000 gates |
| Logic Cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells | 17,280 cells |
| User I/O | 333 interfaces | 333 interfaces | 333 interfaces | 333 interfaces | 333 interfaces | 333 interfaces |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
关键差异点
- Provides balanced -5 timing performance and commercial-temperature operation in the 456-ball FBGA package. (对比 XC3S1000-4FGG456C)
- Maintains the same -5 speed grade while supporting an expanded-temperature ordering option. (对比 XC3S1000-5FG456I)
- Offers additional timing margin over the -5 target when the design and power budget support a faster grade. (对比 XC3S1000-6FG456C)
设计说明
Route the configuration interface and dedicated configuration pins exactly according to the manufacturer FG456 package drawing and Spartan-3 configuration guidance. The 1.00 mm ball pitch requires careful fan-out from the BGA to escape vias, and all 456 positions must be checked against the exact device pinout. Avoid relying on a generic BGA symbol because power, configuration, and user I/O assignments are package-specific.
Implement separate supply paths and local bypass capacitance for the core and any auxiliary I/O supplies according to the manufacturer power-supply recommendations. The device uses a 1.2 V core supply, and its programmable I/O banks may require other voltages. Place the closest high-frequency capacitors at their associated supply and ground balls, provide adequate return paths, and verify startup sequencing before configuration begins.
Budget external and on-chip clock jitter before treating the listed 725 MHz maximum as usable system performance. Use low-jitter clock sources, isolate noisy switching nodes from sensitive clock traces, and maintain continuous reference planes beneath high-speed routes. Re-run static timing analysis after any speed-grade substitution because the -4 and -6 alternatives change the timing margin available to each constraint.
Validate junction temperature and adjacent-board heat rise using the actual FPGA activity, switching rate, supply voltage, and ambient conditions. The commercial-temperature XC3S1000-5FG456C is specified from 0 C to 85 C, while the I-suffix alternatives address a broader temperature range. Spread logic activity where practical, use the package thermal data for the board stack-up, and avoid reducing airflow without recalculating enclosure temperatures.
合规信息
The product listing identifies the device as lead-free. Exact RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification declarations were not stated for this ordering code.