XC4VFX40-10FF1152I - 41,904-Cell Virtex-4 FX FPGA | AMD
部品番号: XC4VFX40-10FF1152I ✗ 生産終了XC4VFX40-10FF1152I 概要
A field-programmable gate array is a programmable digital integrated circuit whose logic, interconnect, and I/O resources can be configured after manufacture. FPGA design is positioned between fixed-function ASICs and software-programmable processors: an ASIC provides the greatest potential efficiency, while an FPGA combines hardware parallelism with the flexibility to revise a design through programmable configuration. The Virtex-4 FX family also provides embedded hard resources for communications-oriented digital systems.
Key resources include 41,904 logic cells, 4,656 configurable logic blocks, 448 I/O, 2,654,208 bits of block RAM, and 192 DSP48 slices. These figures allow parallel datapaths, protocol handling, signal processing, and tightly coupled control logic to be consolidated in one device. The 1152-ball package exposes substantially more interconnect and power pins than a lower-pin-count FPGA package, supporting demanding I/O and power-distribution requirements.
The device uses advanced CMOS technology and includes programmable logic, block RAM, dedicated multipliers, clock-management resources, SelectIO, and configurable I/O standards. Its 1028 MHz internal-frequency figure identifies the maximum clocking capability associated with the documented device family, while practical system performance also depends on the selected clocking resources, speed grade, routing, memory interfaces, and design timing closure.
Typical applications include telecommunications and networking equipment, industrial control, high-performance signal processing, test and measurement, embedded imaging, and communications infrastructure. The large logic and DSP resources suit parallel algorithms, while the 448 I/O provide connections to external memories, transceivers, converters, and clock sources. The Virtex-4 platform is particularly appropriate when a design requires substantially more parallelism than a small microcontroller or FPGA can provide.
Board design should treat this 1152-ball package as a high-pin-count BGA requiring careful escape routing, plane-based power delivery, and multilayer construction. Use the manufacturer pinout, package information, and power-guidance documentation when assigning balls, decoupling networks, and voltage rails. Toolchain and device-file compatibility must also be verified before starting a new design or attempting a replacement.
This product record combines the exact manufacturer-device identity with verified package, resource, temperature, and distributor-listing details. It also distinguishes true drop-in package options from redesign-level alternatives and highlights the engineering constraints that matter most when sourcing or integrating this legacy FPGA.
ドロップイン代替品: XC4VFX40-10FF1152I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
XC4VFX40-10FFG1152I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VFX40-12FFG1152I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VFX40-10FFG1152I5059
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VFX40-10FF1152I 最大定格&電気的特性
| Product Type | Virtex-4 FX field-programmable gate array |
| Logic Cells | 41,904 cells |
| Configurable Logic Blocks | 4,656 blocks |
| Maximum Internal Frequency | 1028 MHz |
| I/O Count | 448 I/O |
| Block RAM | 2,654,208 bits |
| DSP48 Slices | 192 slices |
| パッケージ | 1152-ball FCBGA, 35 mm x 35 mm |
| Ball Pitch | 1.00 mm |
| Technology | Advanced CMOS |
| Logic Family | CMOS |
| Speed Grade | -10 |
| 動作温度 | 0 °C to +85 °C |
| Core Supply Voltage | 1.2 V |
| 実装タイプ | Surface-mount ball-grid array |
| Terminal Count | 1152 balls |
XC4VFX40-10FF1152I 1152-ball fcbga, 35 mm x 35 mm ピン配置ガイド
XC4VFX40-10FF1152I (1152-ball fcbga, 35 mm x 35 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VFX40-10FF1152I.
詳細は データシート をご参照ください。
主な用途
XC4VFX40-10FF1152I の用途: 6 件s: Telecommunications Protocol Processing, Industrial Digital Control, Digital Signal Processing, Test and Measurement Instrumentation, High-Speed Network Interface Equipment, Embedded Imaging and Vision.
Telecommunications Protocol Processing
The XC4VFX40-10FF1152I fits telecommunications protocol processing because it combines 41,904 logic cells, 448 I/O, and 192 DSP48 slices within one Virtex-4 FX device. Parallel packet classification, framing, error detection, and traffic shaping can be implemented in hardware instead of relying entirely on a processor. The 1152-ball FCBGA exposes the device's extensive I/O and power connectivity for interfaces to transceivers, memories, and network processors. Engineers should use the exact device pinout and high-speed interface tables to assign pins, and should verify timing closure against the selected -10 speed grade.
おすすめ
Industrial Digital Control
The XC4VFX40-10FF1152I is suitable for industrial digital control when a machine or test system requires deterministic parallel logic, dedicated multipliers, and extensive I/O. Its 41,904 logic cells can host multiple control channels, while 192 DSP48 slices support filters, transforms, motion calculations, and signal conditioning. The 0 °C to +85 °C operating range matches many indoor industrial environments, but system thermal design must keep the device within its specified limits. Board integration should use manufacturer power and decoupling guidance for this high-ball-count FCBGA.
おすすめ
Digital Signal Processing
The XC4VFX40-10FF1152I offers 192 DSP48 slices, 2,654,208 bits of block RAM, and 41,904 logic cells for digital signal-processing functions that benefit from hardware parallelism. Suitable workloads include fixed-point filtering, correlation, spectral processing, modulation, and adaptive control stages. Dedicated DSP slices reduce pressure on general-purpose logic, while block RAM supports buffering and multiport data movement. Timing closure depends on the selected clocking scheme and routed architecture, so engineers should evaluate the -10 grade with realistic constraints rather than relying only on the 1028 MHz family-level frequency figure.
おすすめ
Test and Measurement Instrumentation
The XC4VFX40-10FF1152I can serve test and measurement instruments that require real-time acquisition, pattern generation, analysis, and interface coordination. Its 448 I/O support connections to converters, memories, trigger systems, and communication controllers, while the DSP resources accelerate arithmetic performed on sampled data. Because the device is a legacy FPGA, engineers should confirm that the synthesis, implementation, and programming tools required by the installed design remain available. A multilayer PCB, robust power planes, and careful high-speed routing are necessary because of the 1152-ball, 1.00 mm-pitch package.
おすすめ
High-Speed Network Interface Equipment
The XC4VFX40-10FF1152I fits legacy network-interface equipment requiring substantial parallel logic and programmable I/O around high-speed external devices. The 41,904 logic cells support protocol state machines, packet buffering, descriptor handling, and traffic management, while 448 I/O expand connection options for transceivers and memory. The exact number and speed of dedicated serial interfaces must be confirmed in the manufacturer device tables because those values are not established by the basic ordering listing. A drop-in replacement review must include pinball, speed-grade, temperature, and device-file equivalence.
おすすめ
Embedded Imaging and Vision
The XC4VFX40-10FF1152I can implement embedded vision pipelines that combine pixel acquisition, thresholding, filtering, feature extraction, and control in a single programmable device. Its 192 DSP48 slices accelerate multiplication and filtering, while the large logic-cell count supports parallel rows or multiple processing lanes. The 448 I/O provide connections to image sensors, frame buffers, and external memory, subject to the exact pinout and interface timing constraints. The legacy toolchain and any existing intellectual-property licenses should be confirmed before extending an established image-processing design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VFX40-10FF1152I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VFX40-10FFG1152I | XC4VFX40-12FFG1152I | XC4VFX40-10FFG1152I5059 |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 1152-ball FCBGA | 1152-ball FCBGA | 1152-ball FCBGA | 1152-ball FCBGA |
| FPGA Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -10 | -10 | -12 | -10 |
| Logic Cells | 41,904 cells | 41,904 cells | 41,904 cells | 41,904 cells |
| Configurable Logic Blocks | 4,656 blocks | 4,656 blocks | 4,656 blocks | 4,656 blocks |
| I/O Count | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Block RAM | 2,654,208 bits | 2,654,208 bits | 2,654,208 bits | 2,654,208 bits |
| DSP48 Slices | 192 slices | 192 slices | 192 slices | 192 slices |
主な差別化要因
- High resource density in the established XC4VFX40 device family (vs XC4VLX15-10FF676I)
- Direct same-footprint ordering option (vs XC4VFX40-10FFG1152I)
- Faster same-family timing option (vs XC4VFX40-12FFG1152I)
- Large I/O count for complex interfaces (vs XC4VFX40-10FFG1152I5059)
設計ノート
Treat the 1152-ball FCBGA as a multilayer power-delivery problem. Follow the manufacturer power-guidance document for core, auxiliary, and I/O supply sequencing, and place the specified bypass capacitors close to their assigned package balls. Use wide, short supply paths or appropriately stitched planes rather than long traces. Validate every rail for normal operation, high-I/O activity, and worst-case clocking before releasing the PCB layout.
A 1.00 mm-pitch, 1152-ball package requires a multilayer PCB with dense escape routing, via-in-pad or via-adjacent fanout where supported, and careful registration. Follow the manufacturer land pattern and ball maps rather than estimating pad geometry from the package dimensions. Preserve antipads and thermal-via recommendations around exposed thermal balls, and verify solder-mask alignment, paste volume, and assembly capability before prototype production.
Route clocks, chip-to-chip memory interfaces, and other high-speed nets with continuous reference planes, controlled length relationships, and avoidance of split-plane crossings. Account for package-ball and via parasitics during timing analysis, and keep switching outputs away from sensitive inputs where the pinout permits. The documented 1028 MHz internal-frequency value is a device capability, not a guarantee that an external interface or routed design will close at the same rate.
Do not substitute a superficially similar XC4VFX40 ordering code without checking the speed grade, temperature range, lead-free identifier, package, and device revision. Confirm that the replacement uses the same 1152-ball footprint, that the configuration file identifies the correct device, and that the selected tools support the legacy Virtex-4 architecture. For a redesign, a smaller FPGA may lower board complexity, while a different package requires a new land pattern and signal-integrity review.
コンプライアンス情報
The exact part's RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status is not stated in the verified listings. The closely identified FFG1152I ordering form indicates a lead-free package identifier, but this alone is not treated as proof of the complete compliance set.