XC4VLX25-12FF668C - 24,192-Cell FPGA | AMD | 668-FCBGA
部品番号: XC4VLX25-12FF668C ✗ 生産終了XC4VLX25-12FF668C 概要
A field-programmable gate array, or FPGA, is a reconfigurable semiconductor in which logic and interconnect resources are programmed after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a digital integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel data paths, control logic, protocol interfaces, and signal-processing functions in one configurable device, shortening development cycles and allowing field updates when the system configuration permits.
The XC4VLX25 combines 24,192 logic cells with 2,688 configurable logic blocks, 448 user I/O, and a maximum stated clock frequency of 1,205 MHz. Its 90 nm CMOS construction and 1.2 V core supply suit demanding communications, networking, industrial control, image processing, and test-equipment designs. The -12 designation identifies its device speed grade, while the FF668 package code identifies the 668-pin FCBGA configuration.
Its architecture allows multiple hardware pipelines to operate concurrently, making the FPGA suitable for deterministic data acquisition, protocol termination, traffic management, and custom accelerator functions. The 448 I/O resources provide substantial connectivity for external memory, clocks, controls, and high-speed interfaces. As with other large FPGAs, achievable system performance depends on pin assignment, clocking, memory implementation, signal integrity, power delivery, and the selected I/O standard.
Typical applications include network interface controllers, industrial automation controllers, video-processing pipelines, communications equipment, and embedded test systems. In each case, the device can combine control logic and parallel datapaths while providing deterministic response times. The 668-pin FCBGA package also requires careful PCB layout because its dense ball array and high-speed connections demand controlled impedance, clean power distribution, and robust thermal design.
For a new design, validate the complete I/O budget and pin assignments in the AMD pinout file before schematic capture. Route clocks independently from data paths, provide adequate decoupling, and keep sensitive inputs away from high-current switching nodes. Also confirm the selected I/O voltage domains, memory-interface topology, termination requirements, and power-sequencing conditions during system validation.
This page combines the exact device identity, verified technical attributes, drop-in migration options, application guidance, and PCB-oriented design notes to support device selection and lifecycle planning. It also distinguishes exact-footprint alternatives from broader FPGA substitutions so engineers can evaluate replacement risk before modifying a released design.
ドロップイン代替品: XC4VLX25-12FF668C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VLX25-12FF668C (同一形状・フットプリント) — 相違点: Device Type, Speed Grade.
XC4VLX25-12FFG668C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX25-10FF668C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC4VLX25-10FFG668C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX25-11FFG668C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX25-8FF668C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX25-12FF668C 最大定格&電気的特性
| Device Type | Virtex-4 LX FPGA |
| Logic Cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs |
| User I/O | 448 I/O |
| 最大クロック周波数 | 1,205 MHz |
| Process Technology | 90 nm CMOS |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -12 |
| パッケージ | 668-pin FCBGA |
| Package Code | FF668 |
| 実装タイプ | Surface Mount |
| Programmable Logic Type | SRAM-configurable FPGA |
XC4VLX25-12FF668C ff668 ピン配置ガイド
XC4VLX25-12FF668C (ff668 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VLX25-12FF668C.
詳細は データシート をご参照ください。
主な用途
XC4VLX25-12FF668C の用途: 6 件s: Industrial Automation and Control, Networking Interface Equipment, High-Speed Data Acquisition, Image and Video Processing, Test and Measurement Systems, Communications Equipment.
Industrial Automation and Control
The XC4VLX25-12FF668C is suitable for industrial controllers that combine deterministic sequencing with parallel data acquisition. Its 24,192 logic cells and 448 I/O provide substantial capacity for sensor interfaces, motor-control logic, interlocks, communications gateways, and supervisory state machines implemented in hardware. The 668-pin FCBGA exposes numerous connections for encoders, sensors, actuators, memory, and control signals. Using a -12-grade device in an established design also avoids introducing timing changes during lifecycle maintenance. Designers should partition slow control paths from high-speed acquisition logic and use the AMD package pinout to verify every ball assignment before fabrication.
おすすめ
Networking Interface Equipment
The device can support networking interface equipment that requires parallel packet processing, buffering, classification, and protocol-specific control functions. Its 2,688 configurable logic blocks and 448 I/O allow designers to implement multiple datapaths and external interfaces while retaining timing margin for clocked logic. The -12 speed grade is appropriate where the released design was qualified around the target device. A drop-in migration to a faster XC4VLX25-10FF668C may add timing headroom without changing the 668-pin FCBGA footprint. Implementation still requires disciplined clock routing, controlled-impedance PCB layers, and explicit I/O-standard selection for each external interface.
おすすめ
High-Speed Data Acquisition
For parallel data-acquisition systems, the XC4VLX25-12FF668C can combine ADC interface logic, digital filtering, trigger processing, and data packing in configurable hardware. The 448 I/O provide connectivity for parallel source buses, while 24,192 logic cells support multiple concurrent pipelines. The 1,205 MHz maximum stated device frequency should not be interpreted as the rate of every external interface; achievable throughput depends on clocking, I/O standards, timing closure, and the selected FPGA architecture. Keep high-fanout clock distribution away from data buses, follow AMD guidance for decoupling and pinout, and validate source-synchronous interfaces with realistic PCB models.
おすすめ
Image and Video Processing
The XC4VLX25-12FF668C can serve in image-processing pipelines that require deterministic parallel operations such as pixel formatting, thresholding, filtering, color conversion, or frame synchronization. Its large logic-cell count and 448 I/O allow multiple stages to be implemented concurrently rather than sequentially. For legacy video equipment, preserving the -12 device can reduce qualification impact while retaining the same architecture used during development. A faster -10 or -11 XC4VLX25 may provide additional timing margin for upgraded resolution or pipeline depth. Board design must account for video-clock jitter, data-bus skew, connector reflections, and the electrical requirements of the selected external video interface.
おすすめ
Test and Measurement Systems
In automated test equipment, the XC4VLX25-12FF668C can implement pattern generation, timing control, capture logic, and protocol instrumentation as parallel hardware functions. The 24,192 logic cells and 448 I/O make it suitable for systems requiring multiple instrument channels and deterministic coordination. The target's established -12 grade supports maintenance of designs already qualified on this ordering code. When evaluating a faster XC4VLX25 grade, review timing constraints, clock uncertainty, I/O drive strength, and power behavior instead of assuming automatic equivalence. Dense FCBGA construction also demands careful escape routing and a multilayer PCB with short return paths for high-speed signals.
おすすめ
Communications Equipment
The XC4VLX25-12FF668C can implement communication line interfaces, framing logic, channelizers, and supervisory functions in programmable logic. Its configurable logic blocks support parallel data movement, while 448 I/O permit simultaneous connections to converters, memory, clocks, and control processors. For established communication platforms, retaining the exact ordering code minimizes device and bitstream migration risk. A faster XC4VLX25-10FF668C may be appropriate when additional timing margin is required and the package pinout confirms compatibility. Designers must maintain power integrity across the 1.2 V core and auxiliary rails, provide decoupling close to the device, and validate every high-speed interface against the actual channel and connector model.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VLX25-12FF668C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VLX25-12FFG668C | XC4VLX25-10FF668C | XC4VLX25-10FFG668C | XC4VLX25-11FFG668C | XC4VLX25-8FF668C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Logic Cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells | 24,192 cells |
| Configurable Logic Blocks | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs | 2,688 CLBs |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Speed Grade | -12 | -12 | -10 | -10 | -11 | -8 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主な差別化要因
- Exact-match lifecycle option within the target speed grade (vs XC4VLX25-12FFG668C)
- Additional timing margin without changing the XC4VLX25 package footprint (vs XC4VLX25-10FF668C)
- Intermediate timing-margin option for careful migration (vs XC4VLX25-11FFG668C)
設計ノート
Use AMD's device-specific Virtex-4 package pinout file to create the 668-pin FCBGA footprint and assign every ball before schematic release. A dense BGA requires multilayer PCB construction with via-in-pad or compatible escape routing, short power connections, and continuous reference planes. Keep high-speed clocks and data interfaces away from noisy switching nodes, and confirm pad and mask dimensions against the current AMD package mechanical drawing rather than copying a generic BGA footprint.
Plan the 1.2 V core rail and all auxiliary I/O supplies as a multi-rail power system. Place decoupling capacitors at the relevant supply balls with very short ground returns, keep supply planes continuous beneath the device, and use vias to connect plane layers where necessary. Validate steady-state and transient current against the actual design utilization because the device's logic density does not by itself determine consumed power. Use the AMD power-estimation methodology for the final switching activity and I/O loading.
Treat the 668-pin FCBGA as a board-dependent thermal solution. Provide a multilayer PCB with substantial copper spreading around the device, symmetrical power and ground vias, and enclosure airflow appropriate to the calculated dissipation. Validate junction temperature under worst-case utilization, I/O activity, and ambient temperature. A separate heat sink is not automatically required, but it may become necessary if the final system cannot maintain acceptable junction temperature through PCB copper and airflow.
Assign clock, memory, serial, and parallel interfaces only after reviewing the device's supported I/O standards and edge relationships. Use controlled-impedance routing for high-speed nets, provide termination appropriate to each interface, keep clock nets away from noisy buses, and match length where the source-synchronous interface requires it. Re-run signal-integrity simulations with actual connector, package, via, and PCB models because the 1,205 MHz maximum device clock does not guarantee compliance at every I/O rate.
Do not approve a replacement solely because it uses a 668-pin package. Confirm the exact speed grade, temperature grade, ordering suffix, pinout, supported I/O standards, power requirements, and configuration compatibility. AMD identifies faster-speed-grade and different-temperature-grade XC4VLX25 options as the fully compatible replacement path. A non-XC4VLX25 FPGA with similar logic capacity may require a different footprint, pinout, tool flow, and bitstream, so it is not a drop-in substitution.
コンプライアンス情報
Compliance status has not been established by the published device identity. Request current AMD declarations for the exact ordering code before using the FPGA in a regulated or automotive supply chain.