XC4VLX40-11FF668I - 41,472-LC Virtex-4 LX FPGA | AMD
部品番号: XC4VLX40-11FF668I ✗ 生産終了XC4VLX40-11FF668I 概要
A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interconnect, and I/O behavior can be programmed after manufacture. The FPGA hierarchy places this device in the Virtex-4 LX family, within the broader field-programmable logic and semiconductor categories. Unlike a fixed-function application-specific integrated circuit, an FPGA can support multiple interface standards, parallel processing architectures, and evolving system requirements without requiring a new physical layout.
The XC4VLX40 provides 41,472 logic cells organized into 4,608 configurable logic blocks, with an internal frequency listed as 1,028 MHz. Its 448 I/O positions support substantial board-level connectivity, while the -11 speed designation identifies its performance class within the Virtex-4 lineup. The 668-pin FCBGA package supports dense external connectivity and is intended for multilayer PCB layouts with careful power, ground, and escape-routing planning.
Technically, the device is a CMOS FPGA optimized for general-purpose programmable logic rather than a fixed digital signal processor. Its distributed architecture allows designers to instantiate parallel datapaths, state machines, interface bridges, protocol controllers, and custom accelerators. The 1.2 V core supply keeps device-level power requirements lower than many older FPGA architectures, although final board power depends on logic activity, I/O loading, speed grade, and selected I/O standards.
Typical applications include industrial control systems, telecommunications interface modules, test and measurement instrumentation, embedded signal-processing systems, and legacy networking equipment. In a telecommunications design, the dense I/O and parallel logic capacity can support multiple buses and data paths. In industrial equipment, programmable logic can implement protocol conversion, acquisition control, and timing functions while retaining the flexibility of FPGA-based field updates.
PCB design should follow the AMD package pinout files and the manufacturer’s power, decoupling, and thermal guidance. Place bypass capacitors near the supply pins, provide a low-impedance ground-plane structure, and route high-speed interfaces with controlled length and impedance. Because the 668-pin package has no corresponding diagram in the standard XAIPART package library, verify every ball assignment against the official AMD package file before fabrication.
This page combines exact catalog identifiers, package information, application guidance, comparison criteria, and practical design considerations for engineers evaluating the XC4VLX40-11FF668I. It also distinguishes true same-footprint alternatives from parts that merely use a similar FPGA package or belong to a different package size.
ドロップイン代替品: XC4VLX40-11FF668I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VLX40-11FF668I (同一形状・フットプリント) — 相違点: Device Type, Speed Grade.
XC4VLX40-11FFG668I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX40-11FFG668C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX40-11FF668C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX40-11FF668IS2
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX40-12FF668I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX40-11FF668I 最大定格&電気的特性
| Device Type | Virtex-4 LX Field-Programmable Gate Array |
| Logic Cells | 41,472 cells |
| Configurable Logic Blocks | 4,608 CLBs |
| Internal Frequency | 1,028 MHz |
| I/O Count | 448 I/O |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -11 |
| Logic Family | CMOS |
| Process Technology | 90 nm CMOS |
| 動作温度 | 0°C to 85°C |
| パッケージ | 668-pin FCBGA |
| Package Type | Flip-Chip Ball Grid Array |
| Device Pins | 668 pins |
| 実装タイプ | Surface Mount |
| Programmable Logic | Configurable logic blocks and programmable interconnect |
XC4VLX40-11FF668I flip-chip ball grid array ピン配置ガイド
XC4VLX40-11FF668I (flip-chip ball grid array パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VLX40-11FF668I.
詳細は データシート をご参照ください。
主な用途
XC4VLX40-11FF668I の用途: 6 件s: Industrial Control and Automation, Telecommunications Interface Equipment, Test and Measurement Instrumentation, Embedded Signal Processing, Legacy Networking Adapters, Aerospace and Defense Support Logic.
Industrial Control and Automation
The XC4VLX40-11FF668I fits industrial controllers that require parallel logic, numerous external signals, and configurable hardware behavior. Its 41,472 logic cells and 448 I/O positions provide substantial capacity for sequencing engines, machine interfaces, counter inputs, and communication adapters. Operating from a 1.2 V core supply and within a listed 0°C to 85°C range, it can support industrial equipment requiring deterministic programmable timing. The design should use the official AMD package assignments, local bypass capacitors, and continuous ground planes to preserve signal integrity around the 668-pin FCBGA.
おすすめ
Telecommunications Interface Equipment
The XC4VLX40-11FF668I is appropriate for legacy telecommunications interface modules requiring multiple parallel channels and flexible protocol handling. The FPGA can implement line-card control, time-slot routing, payload framing, clock-domain crossing, and backplane adaptation in one programmable device. Its 4,608 configurable logic blocks and 448 I/O positions reduce the need for separate glue logic, while the 1,028 MHz listed internal frequency supports demanding clocked pipelines. Engineers should constrain I/O timing, validate differential interfaces, and confirm operating-temperature requirements against the system enclosure.
おすすめ
Test and Measurement Instrumentation
The XC4VLX40-11FF668I can serve as the programmable control and acquisition fabric in test equipment because its 41,472 logic cells support counters, state machines, pattern generation, and data capture concurrently. The 448 I/O positions allow simultaneous connection to sensors, triggers, converters, and communication transceivers, while configurable logic simplifies instrument-specific sequencing. Its 1.2 V core architecture simplifies power design compared with older FPGA generations, although the 668-pin FCBGA requires careful escape routing. Use the manufacturer timing and power constraints to establish safe operating limits for each laboratory instrument configuration.
おすすめ
Embedded Signal Processing
The XC4VLX40-11FF668I supports parallel DSP-style datapaths implemented through configurable logic blocks and programmable interconnect. Its 41,472 logic cells can host filters, correlation, waveform analysis, or fixed-point arithmetic stages, while the 448 I/O positions permit high-throughput data exchange with converters and memory. The listed 1,028 MHz internal frequency enables deeply pipelined implementations when external memory timing permits. Designers should optimize arithmetic for the available DSP resources, register pipeline stages, and verify timing at the selected -11 speed grade rather than treating the internal frequency as a guaranteed interface rate.
おすすめ
Legacy Networking Adapters
The XC4VLX40-11FF668I is suitable for maintaining or repairing legacy networking equipment that relies on a high-density, programmable interface fabric. It can implement protocol converters, packet preprocessors, buffering control, and custom backplane interfaces while retaining the flexibility of FPGA-based updates. The combination of 4,608 configurable logic blocks and 448 I/O positions provides substantial routing capacity for parallel data paths. Because the platform is mature, design teams should document tool versions, verify reconstructed bitstreams, and plan any migration carefully rather than assuming that a newer FPGA can replace it without package and timing changes.
おすすめ
Aerospace and Defense Support Logic
The XC4VLX40-11FF668I can be evaluated for aerospace and defense support functions where programmable logic, interface density, and long-established design tooling are important. Its 41,472 logic cells and 448 I/O positions allow acquisition control, redundant signal conditioning, telemetry packing, and built-in-test logic to share one FPGA. The listed 0°C to 85°C operating range is not a blanket aerospace qualification, so mission-temperature, radiation, vibration, and traceability requirements must be assessed separately. Any new deployment should use the approved AMD package data and an organization-specific qualification plan.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VLX40-11FF668I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VLX40-11FFG668I | XC4VLX40-11FFG668C | XC4VLX40-11FF668C | XC4VLX40-11FF668IS2 | XC4VLX40-12FF668I |
|---|---|---|---|---|---|---|
| Package | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA | 668-pin FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Speed Grade | -11 | -11 | -11 | -11 | -11 | -12 |
| Lead-Free Ordering Option | No G suffix | Yes, G suffix | Yes, G suffix | No G suffix | No G suffix | No G suffix |
主な差別化要因
- Exact legacy ordering configuration (vs XC4VLX40-11FFG668I)
- Industrial-temperature ordering suffix (vs XC4VLX40-11FFG668C)
- Established -11 performance class (vs XC4VLX40-12FF668I)
- High-density programmable resource balance (vs XC4VLX40-11FF668IS2)
設計ノート
Use the official AMD Virtex-4 package file to assign every one of the 668 FCBGA balls before releasing PCB artwork. Place the required supply bypass capacitors close to their associated power balls, connect the core and I/O supplies independently, and provide uninterrupted ground-plane paths beneath the device. Dense escape routing should be checked for clearance, layer-transition violations, and crosstalk before fabrication.
Design the 1.2 V core rail for both average and worst-case logic activity, including the -11 speed grade’s timing requirements. Estimate rail dissipation from actual utilization, clock rates, I/O activity, and the manufacturer’s power tables; do not assume that the core voltage alone represents total device power. Validate startup sequencing, current-limit behavior, ripple, and decoupling against the device electrical limits.
The 668-pin FCBGA relies heavily on its PCB land pattern and copper planes for heat spreading. Use the manufacturer’s thermal modeling guidance to estimate junction temperature at the highest expected ambient temperature and worst-case utilization. Account for adjacent heat sources and airflow enclosure conditions, then preserve enough copper and via density to maintain the required thermal performance.
Do not interchange suffix variants solely because the package drawing looks identical. Verify the speed grade, temperature ordering code, lead-free designation, lifecycle designation, and exact device identifier in the approved bill of materials. The XC4VLX40-11FFG668I and XC4VLX40-11FF668I share the 668-pin format, but procurement and qualification requirements can still differ.
Constrain every external interface using the pin-specific I/O timing and drive-strength characteristics in the manufacturer datasheet. Pay particular attention to clocks, chip selects, and high-fanout nets because simultaneous switching across 448 I/O positions can create power-distortion and crosstalk problems. Use controlled-impedance routing where required and validate the final stack-up with simulation or measurement.
コンプライアンス情報
The target ordering code does not contain the G suffix used for the explicitly lead-free XC4VLX40-11FFG668I. Compliance status for the exact target suffix was not stated and must be confirmed through the Request a Quote form.