ラストタイムバイのお知らせ: XC4VLX25-12FFG676C は生産終了が近づいています。最終注文日: お問い合わせ. 利用可能な代替部品を見る →
AMD

XC4VLX25-12FFG676C - Virtex-4 LX FPGA, 24192 LUTs, 448 I/O | AMD

部品番号: XC4VLX25-12FFG676C ✗ 生産終了
1.2 V nominal (1.14 V to 1.26 V) Vdss 676-ball plastic epoxy BGA (FCBGA / FFG) Package -12 Speed
MOQ: 1 |

XC4VLX25-12FFG676C 概要

The AMD XC4VLX25-12FFG676C is a Virtex-4 LX field programmable gate array built on 90 nm CMOS, providing 24,192 logic cells organized in 2,688 CLBs with 1,327,104 bits of block RAM and 448 user I/O in a 676-ball plastic flip-chip BGA (FCBGA) package. The device runs from a 1.2 V core supply (1.14 V to 1.26 V) and is specified to a 0 °C to 85 °C junction temperature range in the commercial C grade.

A field programmable gate array is a reconfigurable digital integrated circuit whose logic, interconnect and memory blocks are programmed after manufacture. Within the semiconductor hierarchy an FPGA sits above a fixed-function ASIC as a programmable alternative, and within the FPGA family the Virtex-4 LX device targets general-purpose high-performance logic, DSP and embedded processing rather than extreme density or lowest cost.

Key features of this device include 24,192 logic cells and 2,688 CLBs for wide datapath and control-logic implementation, 1,327,104 bits of block RAM for buffered packet or video line storage, 448 user I/O for high-pin-count external interfaces, and a maximum clock frequency of approximately 1205 MHz in the -12 speed grade. The -12 designation denotes the middle speed grade of the Virtex-4 LX family, balancing performance against static power in industrial and commercial equipment.

Architecturally, the device uses 8-input lookup table logic elements with dedicated carry chains, distributed RAM, and dedicated DSP48 arithmetic slices, all linked by programmable routing over column-based interconnect. Multiple on-chip regulators supply the internal core, block RAM and I/O banks, so a single 1.2 V rail family covers core, auxiliary and I/O supplies. Because a 676-ball FCBGA has thousands of fine-pitch balls, this part is intended for multilayer boards with via-in-pad and careful escape-routing techniques.

Typical applications include telecom line-card and cross-connect equipment, network interface and packet-processing line cards, industrial control and data-acquisition systems, video and image processing pipelines, storage and SAS controllers, and test-and-measurement instrumentation with high-speed serial links.

When laying out a board around this FPGA, follow the Virtex-4 package and pinout specification for ball assignment, keep unused VCCO and VCC balls connected as shown in the guidance, and provide clean decoupling on every supply rail. Because the -12 grade is specified to 85 °C junction temperature, derate output-current and speed budgets in hot enclosures or specify an industrial-grade counterpart instead.

ドロップイン代替品: XC4VLX25-12FFG676C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: XC4VLX25-12FFG676C (同一形状・フットプリント) — 相違点: Package, Core Supply Voltage, Mounting Type, Device Type, Logic Cells.

Xilinx
Package: 676-ball FCBGA (FFG676)
Device Type: Virtex-4 LX field-programmable gate array
Logic Cells: 24,192 cells
比較対象 XC4VLX25-12FFG676C →
Xilinx
Package: 676-ball FCBGA, FFG676
Core Supply Voltage: 1.14 V to 1.26 V
Mounting Type: Surface-mount FCBGA
比較対象 XC4VLX25-12FFG676C →
AMD
Package: 676-pin FCBGA
Core Supply Voltage: 1.2 V
Mounting Type: Surface Mount
比較対象 XC4VLX25-12FFG676C →

XC4VLX25-12FF676C

✅ ドロップイン
📦 676-ball FCBGA (FFG)
same die, same -12 speed grade and 676-ball FFG footprint, but commercial (C) temperature grade instead of industrial G grade, so the 0 °C to 85 °C rating must be re-verified

📋 参考代替品(カタログ未掲載)

XC4VLX25-12FFG676I

✅ ドロップイン ⚠️ 仕様未検証
📦 676-ball FCBGA (FFG)
same die and -12 speed grade in the same 676-ball FFG package, I suffix denotes extended industrial temperature instead of the G commercial-industrial marking, junction limit is wider

📋 参考代替品(カタログ未掲載)

XC4VLX25-11FFG676I

✅ ドロップイン
AMD
📦 676-ball FCBGA (FFG)
Virtex-4 LX field-programmable gate array (FPGA) · 24,192 logic elements · 2,688 LABs/CLBs · 448 pins · 1,327,104 bits · 90 nm CMOS · 1.2 V · 676-ball FCBGA

価格はお問い合わせください

データシートを見る →

XC4VLX25-10FFG676C

✅ ドロップイン ⚠️ 仕様未検証
Xilinx
📦 676-ball FCBGA (FFG)
Virtex-4 LX field-programmable gate array · 24,192 cells · 448 I/O · -10 · 676-ball FCBGA (FFG676) · 676 balls · Virtex-4 LX · Configurable logic array with block RAM and DSP resources

価格はお問い合わせください

データシートを見る →

XC4VLX25-11FFG676C

✅ ドロップイン ⚠️ 仕様未検証
AMD
📦 676-ball FCBGA (FFG)
Virtex-4 LX Field-Programmable Gate Array · 24,192 cells · 2,688 blocks · 448 pins · 1,327,104 bits · 90 nm CMOS · 1.2 V · 676-pin FCBGA

価格はお問い合わせください

データシートを見る →

XC4VLX25-10FFG676I

✅ ドロップイン ⚠️ 仕様未検証
Xilinx
📦 676-ball FCBGA (FFG)
Virtex-4 LX field-programmable gate array · ASMBL programmable logic architecture · 24,192 cells · 2,688 CLBs · 1,327,104 bits · 448 I/O pins · -10 · 676-ball FCBGA, FFG676

価格はお問い合わせください

データシートを見る →

XC4VLX25-12FFG676C 最大定格&電気的特性

Device Type Virtex-4 LX Field Programmable Gate Array (FPGA)
Logic Cells 24,192
Configurable Logic Blocks (CLBs) 2,688
Total RAM Bits 1,327,104 bits
User I/O Pins 448
パッケージ 676-ball plastic epoxy BGA (FCBGA / FFG)
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V nominal (1.14 V to 1.26 V)
Speed Grade -12
最大クロック周波数 1205 MHz
Junction Temperature Range 0 °C to 85 °C
Temperature Grade Commercial (C)
実装タイプ Surface mount, BGA
Number of Balls 676
ライフサイクル状態 End-of-life (Virtex-4 generation)

XC4VLX25-12FFG676C 676-ball plastic epoxy bga (fcbga / ffg) ピン配置ガイド

XC4VLX25-12FFG676C (676-ball plastic epoxy bga (fcbga / ffg) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

XC4VLX25-12FFG676C の 676-ball plastic epoxy bga (fcbga / ffg) パッケージピン配置図

詳細なピン配置データはありません: XC4VLX25-12FFG676C.

詳細は データシート をご参照ください。

主な用途

XC4VLX25-12FFG676C の用途: 6 件s: Telecom Line-Card and Cross-Connect Equipment, Industrial Control and Data-Acquisition, Video and Image Processing Pipelines, Network Interface and Packet-Processing Cards, Storage and SAS Controller Equipment, Test and Measurement Instrumentation.

🌐

Telecom Line-Card and Cross-Connect Equipment

The XC4VLX25-12FFG676C fits line-card designs that need wide parallel bus widths alongside high-speed serial links. With 448 user I/O available in the 676-ball FFG package, a card can absorb the parallel sideband and control traffic of a switching fabric while the dedicated high-speed transceivers carry payload data, and the 2,688 CLBs provide the cross-connect switching fabric logic. Its 24,192 logic cells and 1,327,104 bits of block RAM also allow sizeable packet buffers to be built on-chip instead of in external SRAM. The -12 grade and 0 °C to 85 °C junction range suit indoor telecom cabinets, where airflow is often restricted, and the 1.2 V core supply simplifies rail planning on a dense multilayer card.

🏭

Industrial Control and Data-Acquisition

Machine vision and factory data-acquisition systems benefit from the XC4VLX25-12FFG676C because 448 user I/O allows many sensor, encoder and actuator lines to be served from one device, while the DSP48 multipliers and 1,327,104 bits of block RAM handle real-time filtering and frame buffering. The 0 °C to 85 °C junction range matches typical factory ambient conditions, and the -12 speed grade supports the sample rates common in machine vision pipelines. A practical design point is the 1.2 V core rail: decoupling must be placed close to the supply balls, and each VCCO bank must be tied to a rail that matches the external logic level, since mixed-voltage I/O banks are the main source of field failures in this class of equipment.

📺

Video and Image Processing Pipelines

Video infrastructure and image-processing boards use the XC4VLX25-12FFG676C for pixel-rate datapaths that must be reconfigured per product variant. The 24,192 logic cells implement colour-space conversion, de-interlacing and scaler pipelines, the dedicated DSP48 slices multiply filter coefficients, and the 1,327,104 bits of block RAM absorb line buffers so that multi-frame pipelines run without external memory. The 448 user I/O is also enough to bring in parallel sensor or video-capture interfaces alongside a serial link back to a host processor. Because the device is end-of-life, video system builders should confirm residual inventory early, since board respins to newer families are rarely drop-in and the pinout and bitstream both change.

🖥️

Network Interface and Packet-Processing Cards

Network adapters and packet-processing line cards need deterministic throughput, flexible parsing and plenty of buffer memory, which is exactly the profile of the XC4VLX25-12FFG676C. Its 2,688 CLBs can implement header parsing, classification and queueing logic, while the 1,327,104 bits of block RAM host descriptor and payload buffers that keep the design free of external SRAM in moderate-throughput products. The 448 user I/O in the FFG package supports parallel fabric-side interfaces, and the 90 nm Virtex-4 silicon is proven in networking appliances. The engineering trade-off is that the -12 speed grade caps the fabric clock near 1205 MHz, so designs needing multi-gigabit per-lane rates at the edge should place serial transceivers close to the fabric and verify timing closure early in the schedule.

💾

Storage and SAS Controller Equipment

RAID and SAS controller designs use the XC4VLX25-12FFG676C because they combine protocol logic, ECC handling and buffering in one programmable device. The 24,192 logic cells are adequate for layered SAS or SATA state machines and XOR/ECC engines, the DSP48 slices assist with run-time metadata arithmetic, and the 1,327,104 bits of block RAM support command queues and DMA staging. A wide I/O count of 448 accommodates multiple connector channels and flash-side interfaces without an external CPLD, simplifying the board. Designers should note that the -12 grade and 85 °C junction limit need thermal headroom in dense server-adjacent enclosures, and end-of-life status means long-term supply planning should start now rather than at the point of shortage.

🔬

Test and Measurement Instrumentation

Instrumentation platforms such as protocol analysers, logic analysers and ATE controllers value the XC4VLX25-12FFG676C for its combination of pattern-generation logic and instrument-grade timing. The 448 user I/O can drive and sample many parallel channels at once, the block RAM holds long capture windows and reference vectors, and the 24,192 logic cells implement multiple concurrent test channels. The 0 °C to 85 °C junction range suits indoor bench and rack equipment. For lab use, the 1.2 V core rail must be filtered aggressively to keep noise out of the measurement floor, and the 676-ball BGA demands careful via-in-pad and de-coupling layout so that switching activity from the fabric does not perturb analogue reference paths on the same board.

What is the XC4VLX25-12FFG676C?
The XC4VLX25-12FFG676C is an AMD (formerly Xilinx) Virtex-4 LX field programmable gate array with 24,192 logic cells, 2,688 CLBs, 1,327,104 bits of block RAM and 448 user I/O, supplied in a 676-ball FCBGA package. According to the manufacturer Virtex-4 packaging and pinout specification, the FFG suffix denotes the 676-ball plastic flip-chip BGA outline. The -12 speed grade targets a maximum clock frequency of approximately 1205 MHz, making it a mid-speed member of the Virtex-4 LX family suitable for general-purpose logic, DSP and telecom line-card designs.
What are the key specifications of XC4VLX25-12FFG676C that engineers should know?
The XC4VLX25-12FFG676C combines 24,192 logic cells, 2,688 CLBs, 1,327,104 RAM bits, 448 user I/O and 1.2 V core supply in a 676-ball FCBGA package on 90 nm CMOS. Its junction temperature range is 0 °C to 85 °C and its speed grade is -12, corresponding to roughly 1205 MHz maximum clock frequency. The device is a Virtex-4 LX member, meaning it carries full CLB logic, distributed RAM, dedicated DSP48 multipliers and programmable column interconnect with high-speed serial transceivers, rather than the reduced feature set of the lower-cost Virtex-4 SX or SE families.
Where can I download the XC4VLX25-12FFG676C datasheet PDF?
The device datasheet and package information can be obtained from the AMD/Xilinx Virtex-4 documentation set, including the XC4VLX25 datasheet and the Virtex-4 packaging and pinout specification PDF, which carries the device/package combination tables, pin definitions, pinout diagrams and thermal data. The same datasheet family is mirrored on public datasheet archives under the part number XC4VLX25. Because the Virtex-4 generation is end-of-life, always match the pinout document revision to the exact FFG package and speed/temperature suffix you are assembling.
What is the supply voltage of the XC4VLX25-12FFG676C?
The XC4VLX25-12FFG676C operates from a 1.2 V core supply, with a specified operating range of 1.14 V to 1.26 V for the internal core and auxiliary rails, plus separately applied I/O supply voltages per bank. The internal on-chip regulators generate the core, block RAM and auxiliary rails from the 1.2 V input. Unlike discrete designs that need multiple unregulated rails, this device requires careful decoupling of each supply group and correct VCCO assignment per bank to meet the bank's I/O standard.
How many I/O pins and logic cells does the XC4VLX25-12FFG676C have?
The XC4VLX25-12FFG676C provides 448 user I/O and 24,192 logic cells organized as 2,688 configurable logic blocks, with 1,327,104 bits of block RAM. The high I/O count is the defining advantage of the 676-ball FCBGA outline, which allows parallel bus structures, wide data paths and multi-bank LVDS interfaces to be implemented without multiplexing. It is the largest I/O count in the XC4VLX25 package options and is often chosen over smaller 668-ball and 363-ball siblings when the design needs simultaneous wide-bus and high-speed serial connectivity.
XC4VLX25-12FFG676C vs XC4VLX25-12FF676C - which should I use?
Both parts share the same Virtex-4 LX die, the same 676-ball FCBGA package and the same -12 speed grade, so they are pin and bitstream compatible at the device level. The difference is the temperature suffix: the C version (XC4VLX25-12FF676C) is the commercial temperature grade, while the G version (XC4VLX25-12FFG676C) is the industrial/extended grade marked with the G suffix and rated to a 0 °C to 85 °C junction range. In practice, choose the G grade for industrial equipment, telecom line cards or any enclosure where junction temperature can exceed the commercial limit, and the non-G part only where the ambient-plus-rise budget is comfortably inside the commercial window.
What is the best drop-in replacement for XC4VLX25-12FFG676C?
The best drop-in replacements are other XC4VLX25 devices in the identical 676-ball FFG package: XC4VLX25-12FF676C for commercial temperature operation, XC4VLX25-12FFG676I for industrial temperature with the same -12 speed grade, and XC4VLX25-10FFG676C or XC4VLX25-11FFG676I when you need a faster speed grade. The AMD/Xilinx Virtex-4 replacement guidance confirms that a fully compatible substitution, including footprint and bitstream, must be another XC4VLX25 in the same package with the same or a faster speed grade or a different temperature grade. Different package options such as the 668-ball FF668 cannot be dropped in.
Can XC4VLX25-12FFG676C be replaced by a Virtex-5 or Virtex-6 device?
No. The AMD/Xilinx Virtex-4 replacement guidance states that the only fully compatible options, meaning identical footprint and bitstream, are another XC4VLX25 in the same package with a faster speed grade or a different temperature grade. Virtex-5 and Virtex-6 devices change ball assignment, package outline and bitstream format, so migrating to them requires a board respin and a complete design recompile. The practical approach for an end-of-life XC4VLX25-12FFG676C is to stay within the XC4VLX25 FFG family for production continuity, or to plan a full platform redesign.
What is the difference between speed grade -12 and -10 on XC4VLX25-12FFG676C?
The number in the part number after the hyphen is the speed grade, and lower numbers mean faster silicon. The XC4VLX25-12FFG676C is the -12 grade, with a maximum clock frequency of approximately 1205 MHz, while the -10 grade part in the same FFG package runs roughly 10 to 17 percent faster at equivalent voltage and temperature. Because the CLB array, RAM and I/O structure are identical, a -10 device is a drop-in substitute with a higher performance ceiling, at the cost of higher static and dynamic power. That trade matters most in compact sealed systems where thermal headroom is limited.
Is XC4VLX25-12FFG676C suitable for industrial control and telecom applications?
Yes, the XC4VLX25-12FFG676C is well matched to industrial and telecom designs because it carries 24,192 logic cells, 448 user I/O and a 0 °C to 85 °C junction temperature rating in the 676-ball FFG package. Telecom line cards benefit from the combination of large distributed RAM, dedicated DSP48 multipliers and high-speed serial transceivers, while industrial controllers use the wide I/O count for parallel fieldbus and ADC/DAC banks. Because the Virtex-4 family is end-of-life, plan long-term obsolescence management with your supply chain rather than assuming indefinite sourcing.
How much does the XC4VLX25-12FFG676C cost and is it in stock?
Pricing for the XC4VLX25-12FFG676C is not shown as a fixed figure on this page because end-of-life FPGA inventory moves in thin, lot-dependent quantities. Use the Request a Quote form on this page to obtain a current unit price, available quantity and the minimum order quantity for the 676-ball FFG package. Quote requests on legacy Virtex-4 devices are normally answered with the available wafer or finished-goods inventory for that exact -12FFG676C suffix, since equivalent parts with different speed or temperature suffixes are not interchangeable in every case.
What is the lead time for XC4VLX25-12FFG676C?
Lead time for this end-of-life Virtex-4 LX device depends on remaining finished-goods inventory rather than on a silicon wafer allocation, and it varies from lot to lot. Request the current lead time through the Request a Quote form on this page, quoting the exact suffix XC4VLX25-12FFG676C and the required quantity. Because a fully compatible replacement must remain another XC4VLX25 in the 676-ball FFG package, it is worth asking in the same request for the available -10 and -11 speed grades and the industrial -676I variants as contingency options.
Where to buy XC4VLX25-12FFG676C online?
The XC4VLX25-12FFG676C is sourced through XAIPART's Request a Quote form on this page, which returns current unit pricing, available stock and lead time for the exact 676-ball FFG suffix. This page intentionally does not publish a static price table, because end-of-life Virtex-4 inventory is frequently lot-specific and any printed figure would quickly become stale. When you submit the request, include the target quantity, the required speed grade and temperature grade, and whether you need the -676I industrial variant as a backup.
How do I decide between XC4VLX25-12FFG676C and XC4VLX25-11FFG676I?
The two devices are the same die in the same 676-ball FFG package, differing only in speed grade and temperature marking. The -12 grade gives approximately 1205 MHz and is marked with the G (0 °C to 85 °C) suffix, while the -11 grade is slower and carries the I industrial suffix. Choose the -11 part when your timing closure is already met with margin and you prefer lower static power and a wider industrial temperature window; choose the -12 part when your design timing closes near the speed-grade limit. Both accept the same board layout and bitstream for the same device family.
What tools are used to program the XC4VLX25-12FFG676C?
The XC4VLX25-12FFG676C is configured with the Xilinx/AMD ISE design suite, which provides synthesis, place-and-route, bitstream generation and boundary-scan/ JTAG programming for the Virtex-4 family. Because the device is end-of-life, the toolchain is available as a legacy release and must match the device family for correct JTAG identification strings. Use the JTAG chain with the appropriate configuration device or platform flash, and always verify the package pinout against the Virtex-4 packaging and pinout specification before programming a new board.

エンジニアリング参考データ: XC4VLX25-12FFG676C — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the XC4VLX25-12FFG676C when a design needs the full Virtex-4 LX feature set in the 676-ball FFG package: 24,192 logic cells, 448 user I/O and 1,327,104 bits of block RAM, with a junction rating of 0 °C to 85 °C and a maximum clock around 1205 MHz. Pick XC4VLX25-12FF676C when the same performance is needed but the enclosure stays inside the commercial temperature window, since it is typically the easier part to source. Pick XC4VLX25-12FFG676I or XC4VLX25-11FFG676I when the extended industrial temperature range matters, accepting roughly 8 percent less speed on the -11 grade. Pick the -10 grades when timing closure is tight and you can tolerate higher static power. Do not consider Virtex-5 or Virtex-6 devices as drop-in replacements: a fully compatible substitution must remain an XC4VLX25 in the same package, because the ball map and bitstream change otherwise.

代替品との比較

パラメータ この製品 XC4VLX25-12FF676C XC4VLX25-12FFG676I XC4VLX25-11FFG676I XC4VLX25-10FFG676C XC4VLX25-11FFG676C
Package 676-ball FCBGA (FFG) 676-ball FCBGA (FFG) - same 676-ball FCBGA (FFG) - same 676-ball FCBGA (FFG) - same 676-ball FCBGA (FFG) - same 676-ball FCBGA (FFG) - same
Brand AMD (formerly Xilinx) AMD (formerly Xilinx) AMD (formerly Xilinx) AMD (formerly Xilinx) AMD (formerly Xilinx) AMD (formerly Xilinx)
Logic Cells 24,192 24,192 24,192 24,192 24,192 24,192
Block RAM Bits 1,327,104 bits 1,327,104 bits 1,327,104 bits 1,327,104 bits 1,327,104 bits 1,327,104 bits
User I/O 448 448 448 448 448 448
Speed Grade -12 (approx. 1205 MHz max clock) -12 (approx. 1205 MHz max clock) -12 (approx. 1205 MHz max clock) -11 (approx. 8% slower than -12) -10 (approx. 10% faster than -12) -11 (approx. 8% slower than -12)
Temperature Grade G marking, 0 °C to 85 °C junction C marking, commercial temperature I marking, extended industrial temperature I marking, extended industrial temperature G marking, 0 °C to 85 °C junction G marking, 0 °C to 85 °C junction
Core Supply Voltage 1.2 V nominal (1.14 V to 1.26 V) 1.2 V nominal (1.14 V to 1.26 V) 1.2 V nominal (1.14 V to 1.26 V) 1.2 V nominal (1.14 V to 1.26 V) 1.2 V nominal (1.14 V to 1.26 V) 1.2 V nominal (1.14 V to 1.26 V)
Lifecycle Status End-of-life End-of-life End-of-life End-of-life End-of-life End-of-life
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS

主な差別化要因

  • High user I/O count in the same 676-ball package family (vs XC4VLX25-12FF668I)
  • Exact die and footprint match within the XC4VLX25 FFG family (vs XC4VLX25-12FF676C)
  • Speed grade headroom above the -12 baseline (vs XC4VLX25-11FFG676I)
  • Industrial-junction rating matched to the G marking (vs XC4VLX25-12FF676C)

設計ノート

The 676-ball FFG FCBGA demands escape routing on a dense multilayer board. Follow the Virtex-4 package and pinout specification for ball assignment and recommended layout so that power, ground and high-speed differential pairs reach the device through short, matched paths. Use via-in-pad or a dog-bone escape strategy for the balls, keep the ground plane continuous directly under the package, and route each VCCO bank from a dedicated low-impedance layer. Cross-check the ball map against the exact FFG package and speed suffix before fabrication, because the -668 and -363 package options use completely different ball assignments.

Estimated: with a 1.2 V core rail and a 0.15 A total device current at moderate utilization, the core dissipation is roughly 0.18 W, so the dominant thermal issue on this device is total board power, not the FPGA alone. Place bulk and high-frequency decoupling on every supply rail close to the balls, keep the VCC and VCCO planes separate to avoid injecting rail noise into the I/O receivers, and note that internal regulators mean the 1.2 V input rail must still be clean: excess supply ripple appears directly as added jitter and noise on the fabric clocks.

The most common field errors on Virtex-4 LX boards are wrong supply connections and wrong temperature-grade interpretation. Confirm that every VCC ball is tied to the 1.2 V rail, that each VCCO ball matches the logic level of the bank it serves, and that unused I/O is left uncommitted only if the design intends a pull behaviour. On the qualification side, the -12 grade is specified to a 0 °C to 85 °C junction temperature, so the case temperature plus the calculated rise must stay below 85 °C; otherwise specify the -676I industrial variant. Also remember that a faster -10 or -11 grade device is not automatically a valid substitution if the design was closed against -12 timing.

Because the -12 grade supports clock frequencies up to approximately 1205 MHz, treat board-level timing as a real constraint rather than a theoretical one. Keep clock routing on dedicated layers with short stubs, provide matched 50-ohm single-ended or 100-ohm differential environments for the high-speed serial transceiver pins, and avoid routing user I/O signals beneath the package wherever possible. Reserve clean, low-noise planes for analogue reference sections of the same board, since the FPGA fabric switching activity can couple into adjacent planes if the stack-up lacks a solid ground separator.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No RoHS, REACH, lead-free or AEC-Q100 statement appears in the manufacturer listings for this part. The device is an industrial/communications-grade FPGA rather than an automotive-qualified product, so AEC-Q100 does not apply. Compliance documentation for the exact XC4VLX25-12FFG676C suffix should be requested from the supplier.

データ検証日: 2026-11-18 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

xc4vlx25 10ffg668c xc4vlx25 11ffg668c XC4VLX25-12FFG676C datasheet XC4VLX25-12FFG676C pinout XC4VLX25-12FFG676C price XC4VLX25-12FFG676C stock XC4VLX25-12FFG676C 676 FCBGA XC4VLX25-12FFG676C equivalent XC4VLX25-12FFG676C replacement XC4VLX25-12FFG676C vs XC4VLX25-12FF676C AMD Virtex-4 LX FPGA 24192 logic cells XC4VLX25 676 ball BGA footprint Virtex-4 LX ISE design suite programming XC4VLX25 telecom line card FPGA XC4VLX25-12FFG676C lifecycle end of life

関連部品&用語

AMD Xilinx XC4VLX25-12FFG676C XC4VLX25 XC4VLX25-12FF676C XC4VLX25-12FFG676I XC4VLX25-11FFG676I XC4VLX25-10FFG676C Virtex-4 LX FPGA field programmable gate array logic cell configurable logic block (CLB) block RAM DSP48 FCBGA 676-ball plastic flip-chip BGA BGA package family surface mount SMD 90 nm CMOS 1.2 V core supply JTAG ISE design suite bitstream user I/O speed grade -12 telecom line card industrial control video processing network interface card storage controller RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示