XC4VLX40-10FFG1148I - 41,472-Cell Virtex-4 LX FPGA | AMD
部品番号: XC4VLX40-10FFG1148I ✗ 生産終了XC4VLX40-10FFG1148I 概要
An FPGA is a programmable semiconductor in which digital logic, interconnect, memory, and signal-processing functions are defined through a configuration bitstream rather than fixed masks. Within the device hierarchy, the XC4VLX40 is a Virtex-4 LX FPGA, combining configurable logic blocks, block RAM, dedicated arithmetic resources, and programmable input/output. This makes the family suitable for designs requiring parallel processing, high-speed interfaces, protocol bridging, or hardware-accelerated control.
The XC4VLX40 device family provides 41,472 logic cells organized as 4,608 configurable logic blocks, alongside 640 I/O sites and 1,769,472 bits of block RAM. Its -10 speed designation is one of the Virtex-4 performance grades. The target part is specified for a 1.14 V to 1.26 V core supply and uses CMOS technology, making careful rail sequencing and decoupling essential in high-speed system designs.
This specific device combines the -10 performance grade with the industrial-temperature option in a 1,148-ball FCBGA package. The large ball count supports dense connections among programmable logic, memory, and external interfaces, but it also requires a high-density PCB layout with short escape routes, continuous ground-plane distribution, and careful decoupling. The package is surface mount and intended for automated assembly rather than manual prototyping.
Typical uses include telecommunications line-card processing, industrial automation, high-speed data acquisition, network-interface controllers, protocol converters, test equipment, and embedded signal-processing systems. A design can exploit the FPGA's parallel architecture for real-time filtering, packet handling, control logic, or interface termination while using configuration flash to retain the programmed bitstream during power cycles.
Power design must account for the device's dynamic activity, I/O load, configuration state, and operating temperature. Place core and I/O supply decoupling capacitors close to their assigned power balls, preserve the manufacturer's recommended power-plane geometry, and control configuration and system reset sequencing. Thermal design should consider both worst-case logic activity and adjacent heat sources because this large FCBGA package can concentrate substantial dissipated power beneath its center.
This product page consolidates the exact device identity, package, logic and memory capacity, operating information, related Virtex-4 options, and engineering guidance into a design-focused reference. It also distinguishes true same-footprint choices from functionally similar devices that use different packages, helping engineers confirm thermal grade, speed grade, pin compatibility, and PCB reuse before committing a design to production.
ドロップイン代替品: XC4VLX40-10FFG1148I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
XC4VLX40-10FFG1148C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX40-10FF1148I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC4VLX40-11FFG1148C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX40-11FFG1148I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX40-12FFG1148I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX40-10FFG1148I 最大定格&電気的特性
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 41,472 cells |
| Configurable Logic Blocks | 4,608 CLBs |
| Block RAM | 1,769,472 bits |
| Input/Output Sites | 640 I/O |
| Package Pins | 1,148 balls |
| Package Type | 1148-BBGA FCBGA |
| Logic Family | CMOS |
| Internal Frequency | 1,028 MHz |
| Core Supply Voltage | 1.14 V to 1.26 V |
| Speed Grade | -10 |
| Industrial Operating Temperature | -40 °C to +100 °C junction |
| Commercial Operating Temperature | 0 °C to +85 °C |
| 実装タイプ | SMD surface mount |
| Lead-Free Status | Pb-free |
| Series | Virtex-4 LX |
| Related Device Family | XC4VLX40 |
| 動作接合温度 | -40 °C to +100 °C |
XC4VLX40-10FFG1148I 1148-bbga fcbga ピン配置ガイド
XC4VLX40-10FFG1148I (1148-bbga fcbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VLX40-10FFG1148I.
詳細は データシート をご参照ください。
主な用途
XC4VLX40-10FFG1148I の用途: 6 件s: Industrial Control and Automation, Telecommunications Line-Card Processing, High-Speed Data Acquisition, Network Interface and Protocol Conversion, Test and Measurement Instrumentation, Aerospace Ground-Support Equipment.
Industrial Control and Automation
The XC4VLX40-10FFG1148I fits industrial controllers that combine deterministic parallel logic with extensive external connectivity. Its 41,472 logic cells and 4,608 configurable logic blocks can implement motion sequencing, safety interlocks, machine-state logic, and multiple communication protocols in one device, while 640 I/O sites provide substantial interface capacity. The industrial rating supports operation from -40 °C to +100 °C junction. The -10 grade should be matched against every critical timing path, and the 1,148-ball FCBGA requires a high-density controlled-impedance PCB with careful plane and thermal design.
おすすめ
Telecommunications Line-Card Processing
The XC4VLX40-10FFG1148I is suitable for telecommunications line cards requiring parallel packet classification, buffering, and multiple interface endpoints. Its 1,769,472 bits of block RAM support deeper queues and framing functions, while the programmable logic fabric can accelerate filtering, traffic shaping, and protocol conversion. The 640 I/O sites assist with parallel bus and network connectivity, although each external interface must remain within the selected I/O standard and timing limits of the -10 speed grade. Clock distribution, power sequencing, signal integrity, and thermal management are critical in dense line-card implementations.
おすすめ
High-Speed Data Acquisition
The XC4VLX40-10FFG1148I can serve as the central digital engine in a parallel data-acquisition system. The 4,608 configurable logic blocks can implement counters, filters, correlation functions, and real-time decision logic, while 1,769,472 bits of block RAM provide local storage for samples and intermediate results. Its 640 I/O sites are useful for wide data buses, but acquisition timing depends on input standards, clocking topology, and the -10 device timing class. Board-level implementation should control clock jitter, provide terminated interfaces, and isolate analog and digital return paths.
おすすめ
Network Interface and Protocol Conversion
The XC4VLX40-10FFG1148I is appropriate for gateways that translate between parallel and serial protocols or combine several packet-processing functions. Its large programmable logic fabric allows multiple state machines, descriptor tables, and data paths to operate concurrently, while 640 I/O sites can support parallel buses and source-synchronous interfaces. Block RAM can hold lookup tables and packet buffers without consuming scarce logic resources. Designers should use the manufacturer I/O standards, select compatible clocking resources, and complete timing closure for the -10 speed grade before freezing the PCB layout.
おすすめ
Test and Measurement Instrumentation
The XC4VLX40-10FFG1148I supports parallel test and measurement logic requiring simultaneous stimulus generation, response capture, and real-time analysis. Its 41,472 logic cells can host multiple acquisition channels and control sequences, while the block RAM can retain captured waveforms, calibration tables, and test vectors. The industrial temperature range makes it appropriate for controlled industrial instrumentation, although the final enclosure temperature must preserve the junction margin. High-pin-count assembly also demands X-ray inspection, continuity verification, and careful handling because the 1,148-ball FCBGA is not suitable for conventional hand soldering.
おすすめ
Aerospace Ground-Support Equipment
The XC4VLX40-10FFG1148I can be used in ruggedized ground-support equipment where parallel data acquisition and control must operate over a broad temperature range. Its 41,472-cell fabric and 1,769,472-bit block RAM permit real-time diagnostics, telemetry handling, and programmable logic across parallel interfaces. The device's industrial junction specification of -40 °C to +100 °C is distinct from any aerospace qualification, so system-level environmental requirements must be verified separately. For flight hardware, use only an ordering option with explicit aerospace qualification documentation rather than assuming qualification from the family name.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VLX40-10FFG1148I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VLX40-10FFG1148C | XC4VLX40-10FF1148I | XC4VLX40-11FFG1148C | XC4VLX40-11FFG1148I | XC4VLX40-12FFG1148I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1148-BBGA FCBGA | 1148-BBGA FCBGA | 1148-BBGA FCBGA | 1148-BBGA FCBGA | 1148-BBGA FCBGA | 1148-BBGA FCBGA |
| Logic Cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells | 41,472 cells |
| Configurable Logic Blocks | 4,608 CLBs | 4,608 CLBs | 4,608 CLBs | 4,608 CLBs | 4,608 CLBs | 4,608 CLBs |
| Block RAM | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits | 1,769,472 bits |
| Input/Output Sites | 640 I/O | 640 I/O | 640 I/O | 640 I/O | 640 I/O | 640 I/O |
| Core Supply Voltage | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V |
| Speed Grade | -10 | -10 | -10 | -11 | -11 | -12 |
| Operating Temperature | -40 °C to +100 °C junction | 0 °C to +85 °C | -40 °C to +100 °C junction | 0 °C to +85 °C | -40 °C to +100 °C junction | -40 °C to +100 °C junction |
| Lead-Free Status | Pb-free FFG option | Pb-free FFG option | Pb-free FF option | Pb-free FFG option | Pb-free FFG option | Pb-free FFG option |
主な差別化要因
- Industrial temperature coverage (vs XC4VLX40-10FFG1148C)
- Higher timing performance within the same package (vs XC4VLX40-10FFG1148I)
- Large dedicated memory and interface capacity (vs XC4VLX40-10FF1148I)
設計ノート
The 1,148-ball FCBGA requires a high-density PCB with uninterrupted core and ground planes, via-in-pad or closely placed decoupling connections, and controlled escape routing for every used I/O. Select the exact device-specific package file before assigning ball numbers because peripheral and dedicated configuration balls cannot be treated as interchangeable user I/O. Keep high-speed routes short, provide matched-length paths where source-synchronous interfaces require them, and verify the stackup against the manufacturer design guidance.
Plan separate core and I/O power domains using the required 1.14 V to 1.26 V core range. Place local bypass capacitance directly at the corresponding supply and ground balls, and confirm that regulator transient response covers worst-case simultaneous switching, configuration activity, and clocking demand. Estimate conduction loss from the actual supply-to-supply voltage difference and total current, then include regulator efficiency, copper loss, temperature-dependent resistance, and transient margin. Confirm the final rail tolerances against the manufacturer power specification.
Estimated: if the FPGA dissipates 5 W and the effective board-to-ambient thermal resistance is 10 °C/W, the calculated junction-temperature rise is 50 °C. This estimate is for planning only because the actual value depends on device activity, airflow, board area, copper distribution, and adjacent heat sources. Validate the final assembly at maximum expected logic activity and ambient temperature, and use the manufacturer power-dissipation figures as the primary design input.
Use the device pinout and I/O-standard tables to partition external interfaces by voltage and timing requirements. Terminate inputs according to the selected interface topology, maintain continuous reference planes, and pay particular attention to clock jitter, skew, and simultaneous-switching noise. The -10 speed grade establishes the timing class for the design, but achievable interface performance still depends on external components, PCB loss, and clock quality. Complete post-route timing and signal-integrity analysis before fabrication.
Do not substitute the commercial-temperature XC4VLX40-10FFG1148C for the industrial-temperature target in a design that may exceed 85 °C junction conditions. Also avoid assuming that a larger FPGA in the same Virtex-4 LX family has the same ball map; XC4VLX60 and XC4VLX100 can use different package resources. Check the exact device pinout, speed-grade timing, temperature suffix, configuration requirements, and package ball map for every approved alternative.
コンプライアンス情報
The exact target is identified as Pb-free. RoHS, REACH, halogen-free, and conflict-minerals declarations were not explicitly identified for the exact ordering code. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified analog device.