AMD

XC4VLX40-10FFG1148I - 41,472-Cell Virtex-4 LX FPGA | AMD

MPN: XC4VLX40-10FFG1148I ✗ End of Life
1.14 V to 1.26 V Vdss 1,148 balls Package 1,028 MHz Speed
MOQ: 1 |

XC4VLX40-10FFG1148I Overview

The AMD XC4VLX40-10FFG1148I is a Virtex-4 LX field-programmable gate array with 41,472 logic cells, 4,608 configurable logic blocks, 640 I/O sites, and a 1,769,472-bit block-RAM capacity. It operates from a 1.14 V to 1.26 V core supply and is packaged in a 1,148-ball FCBGA surface-mount package. The -10 speed grade and industrial temperature designation identify it for systems requiring a high-capacity programmable logic platform with an extended operating-temperature range.

An FPGA is a programmable semiconductor in which digital logic, interconnect, memory, and signal-processing functions are defined through a configuration bitstream rather than fixed masks. Within the device hierarchy, the XC4VLX40 is a Virtex-4 LX FPGA, combining configurable logic blocks, block RAM, dedicated arithmetic resources, and programmable input/output. This makes the family suitable for designs requiring parallel processing, high-speed interfaces, protocol bridging, or hardware-accelerated control.

The XC4VLX40 device family provides 41,472 logic cells organized as 4,608 configurable logic blocks, alongside 640 I/O sites and 1,769,472 bits of block RAM. Its -10 speed designation is one of the Virtex-4 performance grades. The target part is specified for a 1.14 V to 1.26 V core supply and uses CMOS technology, making careful rail sequencing and decoupling essential in high-speed system designs.

This specific device combines the -10 performance grade with the industrial-temperature option in a 1,148-ball FCBGA package. The large ball count supports dense connections among programmable logic, memory, and external interfaces, but it also requires a high-density PCB layout with short escape routes, continuous ground-plane distribution, and careful decoupling. The package is surface mount and intended for automated assembly rather than manual prototyping.

Typical uses include telecommunications line-card processing, industrial automation, high-speed data acquisition, network-interface controllers, protocol converters, test equipment, and embedded signal-processing systems. A design can exploit the FPGA's parallel architecture for real-time filtering, packet handling, control logic, or interface termination while using configuration flash to retain the programmed bitstream during power cycles.

Power design must account for the device's dynamic activity, I/O load, configuration state, and operating temperature. Place core and I/O supply decoupling capacitors close to their assigned power balls, preserve the manufacturer's recommended power-plane geometry, and control configuration and system reset sequencing. Thermal design should consider both worst-case logic activity and adjacent heat sources because this large FCBGA package can concentrate substantial dissipated power beneath its center.

This product page consolidates the exact device identity, package, logic and memory capacity, operating information, related Virtex-4 options, and engineering guidance into a design-focused reference. It also distinguishes true same-footprint choices from functionally similar devices that use different packages, helping engineers confirm thermal grade, speed grade, pin compatibility, and PCB reuse before committing a design to production.

Drop-in alternatives for XC4VLX40-10FFG1148I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

XC4VLX40-10FFG1148C

✅ Drop-In
📦 1148-BBGA FCBGA
Commercial temperature option rated 0 °C to +85 °C versus industrial -40 °C to +100 °C; speed grade remains -10

📋 Reference alternative (not in catalog)

XC4VLX40-10FF1148I

✅ Drop-In
📦 1148-BBGA FCBGA
Non-FFG ordering suffix with the same -10 grade and industrial -40 °C to +100 °C range; package option notation differs

📋 Reference alternative (not in catalog)

XC4VLX40-11FFG1148C

✅ Drop-In ⚠️ Specs Unverified
📦 1148-BBGA FCBGA
Speed grade changes from -10 to -11 while package and commercial 0 °C to +85 °C temperature range remain equivalent

📋 Reference alternative (not in catalog)

XC4VLX40-11FFG1148I

✅ Drop-In ⚠️ Specs Unverified
📦 1148-BBGA FCBGA
Speed grade changes from -10 to -11 while package and industrial -40 °C to +100 °C temperature range remain equivalent

📋 Reference alternative (not in catalog)

XC4VLX40-12FFG1148I

✅ Drop-In ⚠️ Specs Unverified
📦 1148-BBGA FCBGA
Speed grade changes from -10 to -12 while package and industrial -40 °C to +100 °C temperature range remain equivalent

📋 Reference alternative (not in catalog)

XC4VLX40-10FFG1148I Maximum Ratings & Electrical Characteristics

Device Type Virtex-4 LX field-programmable gate array
Logic Cells 41,472 cells
Configurable Logic Blocks 4,608 CLBs
Block RAM 1,769,472 bits
Input/Output Sites 640 I/O
Package Pins 1,148 balls
Package Type 1148-BBGA FCBGA
Logic Family CMOS
Internal Frequency 1,028 MHz
Core Supply Voltage 1.14 V to 1.26 V
Speed Grade -10
Industrial Operating Temperature -40 °C to +100 °C junction
Commercial Operating Temperature 0 °C to +85 °C
Mounting Type SMD surface mount
Lead-Free Status Pb-free
Series Virtex-4 LX
Related Device Family XC4VLX40
Operating Junction Temperature -40 °C to +100 °C

XC4VLX40-10FFG1148I 1148-bbga fcbga Pin Configuration Guide

Pin configuration for XC4VLX40-10FFG1148I (1148-bbga fcbga package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

1148-bbga fcbga package pinout diagram for XC4VLX40-10FFG1148I

No detailed pinout data available for XC4VLX40-10FFG1148I.

Refer to the datasheet for full pin configuration.

Typical Applications

XC4VLX40-10FFG1148I is suitable for 6 applications: Industrial Control and Automation, Telecommunications Line-Card Processing, High-Speed Data Acquisition, Network Interface and Protocol Conversion, Test and Measurement Instrumentation, Aerospace Ground-Support Equipment.

🏭

Industrial Control and Automation

The XC4VLX40-10FFG1148I fits industrial controllers that combine deterministic parallel logic with extensive external connectivity. Its 41,472 logic cells and 4,608 configurable logic blocks can implement motion sequencing, safety interlocks, machine-state logic, and multiple communication protocols in one device, while 640 I/O sites provide substantial interface capacity. The industrial rating supports operation from -40 °C to +100 °C junction. The -10 grade should be matched against every critical timing path, and the 1,148-ball FCBGA requires a high-density controlled-impedance PCB with careful plane and thermal design.

🌐

Telecommunications Line-Card Processing

The XC4VLX40-10FFG1148I is suitable for telecommunications line cards requiring parallel packet classification, buffering, and multiple interface endpoints. Its 1,769,472 bits of block RAM support deeper queues and framing functions, while the programmable logic fabric can accelerate filtering, traffic shaping, and protocol conversion. The 640 I/O sites assist with parallel bus and network connectivity, although each external interface must remain within the selected I/O standard and timing limits of the -10 speed grade. Clock distribution, power sequencing, signal integrity, and thermal management are critical in dense line-card implementations.

🖥️

High-Speed Data Acquisition

The XC4VLX40-10FFG1148I can serve as the central digital engine in a parallel data-acquisition system. The 4,608 configurable logic blocks can implement counters, filters, correlation functions, and real-time decision logic, while 1,769,472 bits of block RAM provide local storage for samples and intermediate results. Its 640 I/O sites are useful for wide data buses, but acquisition timing depends on input standards, clocking topology, and the -10 device timing class. Board-level implementation should control clock jitter, provide terminated interfaces, and isolate analog and digital return paths.

🔧

Network Interface and Protocol Conversion

The XC4VLX40-10FFG1148I is appropriate for gateways that translate between parallel and serial protocols or combine several packet-processing functions. Its large programmable logic fabric allows multiple state machines, descriptor tables, and data paths to operate concurrently, while 640 I/O sites can support parallel buses and source-synchronous interfaces. Block RAM can hold lookup tables and packet buffers without consuming scarce logic resources. Designers should use the manufacturer I/O standards, select compatible clocking resources, and complete timing closure for the -10 speed grade before freezing the PCB layout.

🧩

Test and Measurement Instrumentation

The XC4VLX40-10FFG1148I supports parallel test and measurement logic requiring simultaneous stimulus generation, response capture, and real-time analysis. Its 41,472 logic cells can host multiple acquisition channels and control sequences, while the block RAM can retain captured waveforms, calibration tables, and test vectors. The industrial temperature range makes it appropriate for controlled industrial instrumentation, although the final enclosure temperature must preserve the junction margin. High-pin-count assembly also demands X-ray inspection, continuity verification, and careful handling because the 1,148-ball FCBGA is not suitable for conventional hand soldering.

✈️

Aerospace Ground-Support Equipment

The XC4VLX40-10FFG1148I can be used in ruggedized ground-support equipment where parallel data acquisition and control must operate over a broad temperature range. Its 41,472-cell fabric and 1,769,472-bit block RAM permit real-time diagnostics, telemetry handling, and programmable logic across parallel interfaces. The device's industrial junction specification of -40 °C to +100 °C is distinct from any aerospace qualification, so system-level environmental requirements must be verified separately. For flight hardware, use only an ordering option with explicit aerospace qualification documentation rather than assuming qualification from the family name.

What are the key specifications of XC4VLX40-10FFG1148I?
The XC4VLX40-10FFG1148I is a Virtex-4 LX FPGA with 41,472 logic cells, 4,608 configurable logic blocks, 640 I/O sites, and 1,769,472 bits of block RAM. According to the AMD Virtex-4 device information, it uses a 1.14 V to 1.26 V core supply and is packaged in a 1,148-ball FCBGA. The -10 suffix identifies its performance grade, while the I suffix identifies the industrial-temperature option. These parameters define a high-capacity, surface-mount FPGA intended for complex parallel logic, interface, and signal-processing designs.
What is the operating voltage of XC4VLX40-10FFG1148I?
The XC4VLX40-10FFG1148I operates from a 1.14 V to 1.26 V core supply. The operating range applies to the FPGA core and does not include the separate voltage requirements of its I/O banks. According to the AMD Virtex-4 device information, the core voltage must be supplied within the specified range under expected temperature and power conditions. PCB power planning should therefore provide stable core distribution while allowing the I/O voltage requirements to be determined separately for each implemented interface.
Where can I download the XC4VLX40-10FFG1148I pinout and package information?
The official AMD Virtex-4 package pinout resource provides package files for FPGA pin assignment and PCB design. According to AMD, the package files are ASCII text files containing the device and package pin information. The XC4VLX40-10FFG1148I uses a 1,148-ball FCBGA package, so its exact ball map must be selected by device, speed grade, package, and temperature option before PCB or schematic work proceeds. Use the package file together with the manufacturer datasheet and design guide rather than relying on a generic BGA symbol.
How many logic cells, RAM bits, and I/O sites does XC4VLX40-10FFG1148I have?
The XC4VLX40-10FFG1148I contains 41,472 logic cells, 1,769,472 bits of block RAM, and 640 I/O sites. According to the AMD Virtex-4 device information, the logic cells are organized into 4,608 configurable logic blocks. These figures establish the device's parallel processing and interface capacity before synthesis. Resource planning should also account for routing constraints, clocking requirements, block RAM organization, and the particular speed grade, because raw totals alone do not determine achievable design performance.
What does the -10 speed grade mean for XC4VLX40-10FFG1148I?
The -10 designation identifies the XC4VLX40's -10 performance grade within the Virtex-4 family. According to manufacturer device information, Virtex-4 devices are offered in -12, -11, and -10 speed grades, with -12 representing the highest performance grade. The grade affects achievable timing performance while the underlying part number identifies the device family and resource configuration. Timing-critical interfaces must therefore be constrained and verified against the specific -10 timing data rather than inferred from generic device capacity.
What is the difference between XC4VLX40-10FFG1148I and XC4VLX40-10FFG1148C?
The primary difference is the temperature option: the XC4VLX40-10FFG1148I is the industrial-temperature variant, while the XC4VLX40-10FFG1148C is the commercial-temperature variant. The manufacturer information lists the I version at -40 °C to +100 °C junction and the C version at 0 °C to +85 °C. Both use the same -10 speed grade and 1,148-ball FCBGA family. Confirm the junction-temperature requirement and system enclosure temperature before treating the C device as a substitute.
When should I choose XC4VLX40-10FFG1148I over XC4VLX40-10FFG1148C?
Choose the XC4VLX40-10FFG1148I when the system must operate across the industrial junction-temperature range of -40 °C to +100 °C. Choose the XC4VLX40-10FFG1148C for a commercial operating environment limited to 0 °C to +85 °C. Both parts use the -10 speed grade and the same 1,148-ball FCBGA package, so the decision should be driven by thermal qualification and lifecycle requirements. Confirm package and pin compatibility in the manufacturer package files before production substitution.
Is XC4VLX40-10FFG1148I suitable for high-speed industrial automation?
The XC4VLX40-10FFG1148I is suitable for high-speed industrial automation when a design requires substantial parallel logic and an industrial thermal range. Its 41,472 logic cells, 640 I/O sites, 1,769,472-bit block RAM, and -40 °C to +100 °C junction specification support complex control, acquisition, and communication functions. Actual signal rates remain dependent on selected I/O standards, clocking, PCB construction, and timing closure. Use the manufacturer I/O and design documentation to confirm each interface.
What is the best drop-in replacement for XC4VLX40-10FFG1148I?
The closest same-footprint options are other XC4VLX40 devices in the 1,148-ball FCBGA family, provided their speed grade and temperature option meet the design requirements. XC4VLX40-10FFG1148C preserves the -10 speed grade and package but limits the commercial junction range to 0 °C to +85 °C. Higher-grade XC4VLX40 variants use the same device family and package while changing performance timing. Confirm the exact pin map, configuration requirements, and operating-temperature limits before selecting a replacement.
Can XC4VLX40-10FFG1148C replace XC4VLX40-10FFG1148I?
The XC4VLX40-10FFG1148C can be a pin-compatible choice only when the design does not require the industrial temperature range. It retains the -10 speed grade and 1,148-ball FCBGA package, but its listed operating range is 0 °C to +85 °C rather than -40 °C to +100 °C. For outdoor equipment, industrial machinery, or systems with an elevated enclosure temperature, that 40 °C lower junction-temperature limit can be decisive. Review the manufacturer package file and thermal qualification before approving the change.
What can replace XC4VLX40-10FFG1148I?
A replacement must preserve the XC4VLX40 resource organization and 1,148-ball FCBGA footprint, while matching the required -10 or faster performance class and industrial temperature exposure. Same-package Virtex-4 options include commercial-temperature, industrial-temperature, and different-speed variants of the XC4VLX40. Larger XC4VLX devices use different package options and may not fit the existing PCB. Use the exact device comparison table and package pinout file to determine whether a candidate is a true board-level drop-in.
Where to buy XC4VLX40-10FFG1148I online?
Use the Request a Quote form on this page to request availability, lead time, and a quotation for the XC4VLX40-10FFG1148I. The request should include the required quantity, target package, industrial-temperature requirement, and any programmed-device or inspection requirements. Because the XC4VLX40 belongs to a mature Virtex-4 generation, production planning should also consider lifecycle continuity and counterfeit-risk controls. The manufacturer ordering information remains authoritative for package and configuration details.
What is the price of XC4VLX40-10FFG1148I?
Use the Request a Quote form on this page for the current XC4VLX40-10FFG1148I quotation. The request should specify quantity, shipment date, inspection requirements, and whether the FPGA requires an unmodified factory configuration. Pricing for a mature high-pin-count FPGA can vary with quantity, availability, and inspection requirements, so a single static figure is not appropriate for purchasing decisions. The manufacturer part number and package suffix should remain unchanged throughout the request.
What is the lead time and stock status of XC4VLX40-10FFG1148I?
Request the current XC4VLX40-10FFG1148I lead time and stock status through the Request a Quote form on this page. Include the required quantity, target delivery date, and whether obsolete-part traceability or inspection documentation is needed. Lead time for a mature FPGA depends on current inventory and manufacturing continuity, and an in-stock indication does not by itself guarantee production allocation. Use the exact industrial-temperature suffix and complete orderable part number when requesting supply information.
How should power and decoupling be designed for XC4VLX40-10FFG1148I?
Design the XC4VLX40-10FFG1148I around its 1.14 V to 1.26 V core supply, with separate planning for every I/O bank voltage. According to the manufacturer device information, the device uses CMOS logic and requires stable distribution across a large 1,148-ball FCBGA package. Place bypass capacitors at the associated supply and ground balls, maintain continuous plane distribution, and follow the manufacturer power-guide recommendations. Account for simultaneous switching, configuration-state current, and ambient temperature in regulator headroom.
Is XC4VLX40-10FFG1148I RoHS compliant and Pb-free?
The XC4VLX40-10FFG1148I is identified as Pb-free, and the FFG ordering suffix distinguishes the lead-free package option. RoHS and REACH declarations for the exact ordering code should be confirmed through current AMD environmental-compliance documentation before a regulated shipment. AEC-Q100 qualification is not established for this industrial-temperature FPGA in the device information, so it should not be described as automotive-qualified without separate supporting documentation. Compliance status and product-lifecycle decisions should be documented for the exact assembled system.

Engineering reference data for XC4VLX40-10FFG1148I — comparison, design guidance, and compliance information.

Selection Guide

Choose the XC4VLX40-10FFG1148I for a legacy Virtex-4 LX design that requires the -10 performance class, industrial temperature exposure, and an existing 1,148-ball FCBGA footprint. The XC4VLX40-10FFG1148C is appropriate only when the commercial range of 0 °C to +85 °C is sufficient; it preserves the -10 grade and package but reduces thermal margin. The XC4VLX40-10FF1148I retains the -10 industrial configuration, although procurement and package documentation should confirm the ordering suffix. For designs requiring more timing margin, the -11 and -12 XC4VLX40 options use the same 1,148-ball package, but their timing data must replace the -10 constraints during implementation. Always compare the device-specific package files, configuration requirements, and I/O assignments before approving any substitution.

Comparison with Alternatives

Parameter This Product XC4VLX40-10FFG1148C XC4VLX40-10FF1148I XC4VLX40-11FFG1148C XC4VLX40-11FFG1148I XC4VLX40-12FFG1148I
Brand AMD AMD AMD AMD AMD AMD
Package 1148-BBGA FCBGA 1148-BBGA FCBGA 1148-BBGA FCBGA 1148-BBGA FCBGA 1148-BBGA FCBGA 1148-BBGA FCBGA
Logic Cells 41,472 cells 41,472 cells 41,472 cells 41,472 cells 41,472 cells 41,472 cells
Configurable Logic Blocks 4,608 CLBs 4,608 CLBs 4,608 CLBs 4,608 CLBs 4,608 CLBs 4,608 CLBs
Block RAM 1,769,472 bits 1,769,472 bits 1,769,472 bits 1,769,472 bits 1,769,472 bits 1,769,472 bits
Input/Output Sites 640 I/O 640 I/O 640 I/O 640 I/O 640 I/O 640 I/O
Core Supply Voltage 1.14 V to 1.26 V 1.14 V to 1.26 V 1.14 V to 1.26 V 1.14 V to 1.26 V 1.14 V to 1.26 V 1.14 V to 1.26 V
Speed Grade -10 -10 -10 -11 -11 -12
Operating Temperature -40 °C to +100 °C junction 0 °C to +85 °C -40 °C to +100 °C junction 0 °C to +85 °C -40 °C to +100 °C junction -40 °C to +100 °C junction
Lead-Free Status Pb-free FFG option Pb-free FFG option Pb-free FF option Pb-free FFG option Pb-free FFG option Pb-free FFG option

Key Differentiators

  • Industrial temperature coverage (vs XC4VLX40-10FFG1148C)
  • Higher timing performance within the same package (vs XC4VLX40-10FFG1148I)
  • Large dedicated memory and interface capacity (vs XC4VLX40-10FF1148I)

Design Notes

The 1,148-ball FCBGA requires a high-density PCB with uninterrupted core and ground planes, via-in-pad or closely placed decoupling connections, and controlled escape routing for every used I/O. Select the exact device-specific package file before assigning ball numbers because peripheral and dedicated configuration balls cannot be treated as interchangeable user I/O. Keep high-speed routes short, provide matched-length paths where source-synchronous interfaces require them, and verify the stackup against the manufacturer design guidance.

Plan separate core and I/O power domains using the required 1.14 V to 1.26 V core range. Place local bypass capacitance directly at the corresponding supply and ground balls, and confirm that regulator transient response covers worst-case simultaneous switching, configuration activity, and clocking demand. Estimate conduction loss from the actual supply-to-supply voltage difference and total current, then include regulator efficiency, copper loss, temperature-dependent resistance, and transient margin. Confirm the final rail tolerances against the manufacturer power specification.

Estimated: if the FPGA dissipates 5 W and the effective board-to-ambient thermal resistance is 10 °C/W, the calculated junction-temperature rise is 50 °C. This estimate is for planning only because the actual value depends on device activity, airflow, board area, copper distribution, and adjacent heat sources. Validate the final assembly at maximum expected logic activity and ambient temperature, and use the manufacturer power-dissipation figures as the primary design input.

Use the device pinout and I/O-standard tables to partition external interfaces by voltage and timing requirements. Terminate inputs according to the selected interface topology, maintain continuous reference planes, and pay particular attention to clock jitter, skew, and simultaneous-switching noise. The -10 speed grade establishes the timing class for the design, but achievable interface performance still depends on external components, PCB loss, and clock quality. Complete post-route timing and signal-integrity analysis before fabrication.

Do not substitute the commercial-temperature XC4VLX40-10FFG1148C for the industrial-temperature target in a design that may exceed 85 °C junction conditions. Also avoid assuming that a larger FPGA in the same Virtex-4 LX family has the same ball map; XC4VLX60 and XC4VLX100 can use different package resources. Check the exact device pinout, speed-grade timing, temperature suffix, configuration requirements, and package ball map for every approved alternative.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Yes
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact target is identified as Pb-free. RoHS, REACH, halogen-free, and conflict-minerals declarations were not explicitly identified for the exact ordering code. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified analog device.

Data verified on: 2026-11-18 — data verified and curated by XAIPART's component engineering team

Related Searches

XC4VLX40-10FFG1148I datasheet XC4VLX40-10FFG1148I pinout XC4VLX40-10FFG1148I specifications XC4VLX40-10FFG1148I package XC4VLX40-10FFG1148I equivalent XC4VLX40-10FFG1148I replacement XC4VLX40-10FFG1148I price XC4VLX40-10FFG1148I stock AMD XC4VLX40-10FFG1148I XC4VLX40 1148 FCBGA FPGA XC4VLX40 41472 logic cells FPGA XC4VLX40-10FFG1148I vs XC4VLX40-10FFG1148C Virtex-4 LX FPGA industrial temperature

Related Components & Terms

AMD Xilinx XC4VLX40-10FFG1148I XC4VLX40-10FFG1148C XC4VLX40-10FF1148I XC4VLX40-11FFG1148C XC4VLX40-11FFG1148I XC4VLX40-12FFG1148I Virtex-4 LX FPGA field-programmable gate array programmable logic configurable logic block CLB block RAM FCBGA-1148 BGA package family surface-mount device CMOS logic cell input/output site power-supply rejection ratio industrial temperature grade configuration bitstream programmable logic device
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details