XC5VLX30T-1FFG665I - 30K Virtex-5 LXT FPGA | AMD Xilinx
部品番号: XC5VLX30T-1FFG665I ✓ 生産中XC5VLX30T-1FFG665I 概要
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O functions are configured after fabrication. The FPGA hierarchy progresses from programmable logic devices to field-programmable gate arrays and then to reconfigurable digital logic. Within the Virtex-5 family, the LXT platform combines configurable logic with dedicated serial transceiver resources for designs requiring high-speed point-to-point or network links.
The device provides 2,400 logic cells and is associated with 30,720 configurable gates in the product description. Its 360 available I/O sites support interfaces to memory, external processors, test equipment, and communications peripherals. The listed 1,098 MHz internal frequency indicates the device's stated maximum internal operating frequency, while its 65 nm CMOS process places it in the mature Virtex-5 generation.
The XC5VLX30T portion identifies the Virtex-5 LXT resource configuration, while the -1 suffix identifies the performance grade and FFG665I identifies the lead-free 665-pin FCBGA package and industrial-grade ordering designation. The package combines a large ball-grid-array footprint with dense external connectivity, making careful PCB layout, via planning, decoupling, and thermal analysis essential.
Typical applications include Ethernet and other serial communications equipment, industrial control systems, test and measurement platforms, high-speed protocol bridges, embedded signal-processing systems, and network appliances. The LXT architecture is particularly useful when a design needs programmable parallel logic alongside dedicated high-speed serial interfaces.
PCB design should follow the AMD package pinout files and the device's reference power and ground requirements. Keep high-speed serial and clock routing short and controlled, place decoupling close to supply pins, and provide unobstructed thermal paths through the BGA and PCB construction. Because this is a large pin-count FPGA, adequate escape routing, layer transitions, and manufacturing-rule compliance are essential to successful implementation.
This page combines the key device characteristics, qualified replacement options, application guidance, and engineering-oriented comparison information. It is intended to help engineers identify the correct Virtex-5 device, verify package and grade constraints, and plan a reliable hardware implementation before releasing a new FPGA design.
ドロップイン代替品: XC5VLX30T-1FFG665I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC5VLX30T-1FFG665I (同一形状・フットプリント) — 相違点: Core Supply Voltage, Process Technology, Device Type, Logic Elements, Package.
XC5VLX30T-1FFG665CES
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VLX30-1FFG665
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VLX30T-2FFG665C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VLX30T-2FF665C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VFX30T-1FFG665I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VLX30T-1FFG665I 最大定格&電気的特性
| FPGA Family | Virtex-5 LXT |
| Logic Cells | 2,400 cells |
| Configurable Gates | 30,720 gates |
| Number of I/O | 360 I/O |
| Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| Internal Frequency | 1,098 MHz |
| Package Type | 665-BBGA FCBGA |
| Package Dimensions | 19 x 19 mm |
| Number of Package Pins | 665 pins |
| 動作温度 | 0°C to 85°C |
| Performance Grade | -1 grade |
| Architecture | Second-generation ASMBL column-based FPGA architecture |
| Tri-Mode Ethernet Support | 10 Mb/s, 100 Mb/s, and 1,000 Mb/s |
| Ethernet Auto-Negotiation | Tri-mode auto-negotiation supported |
| Ethernet Receive Address Filter | 5 address entries |
| Ethernet Design Standard | IEEE 802.3-2002 |
| Lead-Free Status | Lead Free |
| RoHS ステータス | RoHS Compliant |
XC5VLX30T-1FFG665I 665 pins ピン配置ガイド
XC5VLX30T-1FFG665I (665 pins パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC5VLX30T-1FFG665I.
詳細は データシート をご参照ください。
主な用途
XC5VLX30T-1FFG665I の用途: 6 件s: Industrial Ethernet Control, Network Protocol Bridge, Test and Measurement Equipment, High-Speed Data Acquisition, Embedded Communications Processor, Secure Network Appliance.
Industrial Ethernet Control
The XC5VLX30T-1FFG665I fits industrial Ethernet controllers that combine protocol handling with parallel control logic. Its 2,400 logic cells and 360 listed I/O provide resources for packet processing, status registers, digital interfaces, and machine-control signals, while the LXT platform supports dedicated serial connectivity. The documented tri-mode Ethernet capability covers 10 Mb/s, 100 Mb/s, and 1,000 Mb/s operation with auto-negotiation and a five-entry receive-address filter. Designers should reserve logic and routing for timing closure, isolate clocks from noisy power stages, and validate PHY, magnetics, and isolation requirements against the complete system specification.
おすすめ
Network Protocol Bridge
The XC5VLX30T-1FFG665I is suitable for bridging parallel legacy interfaces to high-speed serial links. Its 360 listed I/O allow concurrent connection to multiple buses, status signals, and control processors, while the Virtex-5 LXT architecture provides programmable resources for packetization and protocol state machines. The 1,098 MHz listed internal frequency supports timing-oriented logic designs, although actual interface throughput depends on the selected clock, pin assignments, and transceiver configuration. Layout should keep serial traces short and impedance controlled, reserve suitable layer transitions for BGA escape routing, and include clock-crossing safeguards between unrelated domains.
おすすめ
Test and Measurement Equipment
The XC5VLX30T-1FFG665I can implement parallel acquisition, timing, and control functions in modular test equipment. With 2,400 logic cells and 360 listed I/O, it can coordinate multiple digital channels, generate stimulus, capture status, and interface to an external processor through parallel buses or serial links. The 65 nm CMOS implementation and 1 V core supply are suitable for a controlled laboratory platform when the power tree is designed for predictable sequencing and low-noise operation. Keep sensitive analog sections separated from digital switching paths, provide independent clock domains where required, and account for connector and cable skew during timing analysis.
おすすめ
High-Speed Data Acquisition
The XC5VLX30T-1FFG665I supports parallel acquisition front ends that require numerous sample-control and data-capture signals. The device provides 360 listed I/O and 2,400 logic cells for channel sequencing, deskewing control, buffer management, and interface translation. Its LXT platform is useful where acquired data must move through high-speed serial links rather than a large external bus. Designers should establish clock and data timing from the source specification, use pipelining to meet timing constraints, and maintain matched routing between acquisition groups. BGA escape routing, layer-stack balance, and local decoupling remain critical because 360 signal contacts create substantial routing demand.
おすすめ
Embedded Communications Processor
The XC5VLX30T-1FFG665I can serve as a dedicated communications processor for control packets, line monitoring, and peripheral coordination. Its programmable logic can implement protocol state machines, buffers, and interfaces while the 360 I/O sites connect local processors, memories, and status devices. The listed 1,098 MHz internal frequency provides substantial timing margin for synchronous designs, while the LXT architecture supports high-speed serial communications. For reliable deployment, define clock-domain boundaries early, use device-supported clocking resources, constrain all interfaces, and verify reset and initialization behavior for every power-up and configuration path.
おすすめ
Secure Network Appliance
The XC5VLX30T-1FFG665I is useful in network appliances requiring parallel configuration, status, and management logic alongside accelerated serial links. The 2,400 logic cells support control-plane functions, while 360 listed I/O provide connectivity to memory, flash, status indicators, and external controllers. Its Virtex-5 LXT heritage is well suited to established network-interface architectures and legacy migration programs. Designers should include boundary scan, secure configuration handling, fault monitoring, and recovery mechanisms in the system architecture. Because FPGA configuration and package complexity increase failure risk, verify power rails, startup timing, and thermal margins across all operating modes.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC5VLX30T-1FFG665I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC5VLX30T-1FFG665C | XC5VLX30-1FFG665 | XC5VLX30T-2FFG665C | XC5VLX30T-2FF665C | XC5VFX30T-1FFG665I |
|---|---|---|---|---|---|---|
| Package | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 VFX |
| Performance Grade | -1 grade | -1 grade | -1 grade | -2 grade | -2 grade | -1 grade |
| Special Features | Virtex-5 LXT with tri-mode Ethernet capability | Virtex-5 LXT with tri-mode Ethernet capability | Virtex-5 LXT with tri-mode Ethernet capability | Virtex-5 LXT with tri-mode Ethernet capability | Virtex-5 LXT with tri-mode Ethernet capability | Virtex-5 VFX resource mix and device-specific hard blocks |
主な差別化要因
- Retains the original -1 performance class while offering a direct package-compatible alternative (vs XC5VLX30T-2FFG665C)
- Provides a closer ordering-grade match than the no-suffix alternative (vs XC5VLX30-1FFG665)
- Uses the LXT platform with documented 10/100/1,000 Mb/s tri-mode Ethernet capability (vs XC5VFX30T-1FFG665I)
設計ノート
Build the FFG665 land pattern and escape routing from AMD's official package-device pinout files rather than from a generic 665-ball library. Confirm every power, ground, configuration, clock, and user-I/O ball in the schematic. Plan via transitions for the BGA escape region, maintain controlled impedance on clocks and serial links, and check the stackup against the package escape and differential-pair requirements before routing.
Use the AMD device requirements to allocate the 1 V core rail and associated package power balls; do not infer a complete power tree from the core voltage alone. Place bulk and high-frequency decoupling close to the device, keep return-current paths continuous, and verify worst-case startup current, steady-state current, rail sequencing, and tolerance across temperature. Programmable devices can have substantially different dynamic demand during configuration and normal operation, so both phases require assessment.
Evaluate thermal performance with the actual PCB stackup, enclosure, airflow, and adjacent heat sources rather than relying on a package label. The 665-pin FCBGA depends on board copper and through-via heat spreading for cooling, and its I/O density makes escape routing space limited. Preserve copper beneath and around the device where practical, avoid trapping heat beneath the BGA, and document worst-case ambient and power conditions for reliability validation.
Do not treat a same-package candidate as an automatic functional replacement. XC5VLX30T-1FFG665C changes the temperature-grade suffix, the -2 grade candidates change timing margin, and XC5VFX30T-1FFG665I changes the platform resource mix. Recompile the design, review configuration compatibility, compare every utilized hard block and differential-capable pin, and rerun timing and I/O placement before approving a substitution.
コンプライアンス情報
The exact-MPN specification listing identifies RoHS-compliant and lead-free construction. No vehicle-specific AEC-Q100 qualification is stated for this Virtex-5 FPGA.