XC4VLX60-11FFG668I - 59,904-Cell FPGA | AMD Xilinx
部品番号: XC4VLX60-11FFG668I ✗ 生産終了XC4VLX60-11FFG668I 概要
A field-programmable gate array is a semiconductor whose digital logic, memory, and interconnect resources are configured after manufacture. The Virtex-4 LX belongs to the FPGA hierarchy, which sits above configurable logic blocks and below broader programmable-logic systems. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for protocol bridging, signal processing, control, or hardware acceleration without changing the physical PCB.
The XC4VLX60-11FFG668I provides 59,904 logic cells organized into 6,656 logic blocks and 26,624 Adaptive Logic Modules. Its 448 dedicated I/O positions support interface-heavy designs, while 2.81 Mbit of embedded block RAM provides on-chip storage for packet buffers, data acquisition, and local processing. The -11 speed grade supports a listed maximum clock frequency of 1205 MHz.
The device is manufactured using 90 nm CMOS technology and operates from a 1.2 V nominal core supply, with a listed range of 1.14 V to 1.26 V. The -11 designation identifies the performance grade, while the FFG package suffix identifies the 668-ball surface-mount package. Its 668-ball construction supports dense routing and substantial programmable I/O compared with leaded packages.
Typical applications include industrial control, telecommunications infrastructure, instrumentation, embedded video processing, network packet handling, and FPGA-based accelerator subsystems. The combination of 448 I/O and 2.81 Mbit of block RAM is especially useful when several independent data paths must operate concurrently without relying on external memory.
PCB implementation requires careful power-plane design, decoupling, thermal management, and pin-aware BGA escape routing. Use the AMD package pinout file to assign every ball and the manufacturer datasheet to confirm voltage, decoupling, and configuration requirements before fabrication. The large BGA also demands inspection methods capable of detecting solder-joint defects.
This page combines the exact device identity, package and electrical characteristics, qualified replacement options, comparison parameters, and implementation guidance for engineers evaluating the XC4VLX60-11FFG668I in new or legacy Virtex-4 systems.
ドロップイン代替品: XC4VLX60-11FFG668I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC4VLX60-11FFG668I (同一形状・フットプリント) — 相違点: Device Type, Package, Temperature Grade, Logic Cells, Mounting Type.
XC4VLX60-10FFG668I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX60-12FFG668I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC4VLX60-11FF668C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX60-11FFG668C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC4VLX60-11FF668I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC4VLX60-11FFG668I 最大定格&電気的特性
| Device Type | Virtex-4 LX field-programmable gate array |
| Logic Cells | 59,904 cells |
| Logic Blocks | 6,656 blocks |
| Adaptive Logic Modules | 26,624 ALMs |
| Embedded Memory | 2.81 Mbit |
| User I/O | 448 I/O |
| Inputs | 448 inputs |
| Outputs | 448 outputs |
| 最大クロック周波数 | 1205 MHz |
| Internal Frequency | 1028 MHz |
| Process Technology | 90 nm CMOS |
| Logic Family | CMOS |
| Nominal Supply Voltage | 1.2 V |
| Supply Voltage Range | 1.14 V to 1.26 V |
| Speed Grade | -11 |
| パッケージ | 668-ball FBGA, 27 x 27 mm |
| Terminal Type | 668 balls |
| 実装タイプ | Surface mount |
| Lead-Free Status | Pb-free |
XC4VLX60-11FFG668I 668-ball fbga, 27 x 27 mm ピン配置ガイド
XC4VLX60-11FFG668I (668-ball fbga, 27 x 27 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC4VLX60-11FFG668I.
詳細は データシート をご参照ください。
主な用途
XC4VLX60-11FFG668I の用途: 6 件s: Industrial Control and Automation, Telecommunications Packet Processing, Data Acquisition and Instrumentation, Embedded Video Processing, Hardware Accelerator Subsystems, Aerospace and Defense Test Equipment.
Industrial Control and Automation
The XC4VLX60-11FFG668I is well suited to industrial controllers that coordinate many sensors, actuators, and communication channels in parallel. Its 59,904 logic cells can host control logic, state machines, motion sequencing, and diagnostic routines, while 448 I/O provide substantial interface capacity for field-bus and digital equipment. The 2.81 Mbit of embedded memory can support local buffers and timing-critical data handling. Because the FPGA is a mature programmable platform, industrial designs can preserve deterministic behavior while adding or revising functions through configuration updates during qualification and maintenance.
おすすめ
Telecommunications Packet Processing
The XC4VLX60-11FFG668I can implement parallel packet classification, buffering, framing, and traffic-management functions because its 59,904 logic cells support multiple independent datapaths. The 448 I/O positions allow multiple external interfaces, and 2.81 Mbit of embedded block RAM can hold packet headers, counters, or scheduling data close to the processing logic. Its listed 1205 MHz maximum clock and -11 speed grade provide useful timing margin for clocked pipeline designs, although timing closure, I/O standards, and line-rate interfaces must be validated together for each telecommunications platform.
おすすめ
Data Acquisition and Instrumentation
The XC4VLX60-11FFG668I supports high-channel-count data-acquisition systems by combining 448 I/O with programmable logic for sampling control, triggering, filtering, and digital signal conditioning. On-chip block RAM can implement local FIFO structures, waveform windows, or intermediate processing stages, reducing traffic to external memory during each acquisition burst. The device's large logic budget also permits redundant processing paths and calibration logic to coexist. For precision measurement equipment, designers should select the appropriate external I/O standards and validate edge timing at the selected -11 speed grade.
おすすめ
Embedded Video Processing
The XC4VLX60-11FFG668I can accommodate parallel pixel pipelines, frame buffers, color conversion, and interface control for embedded video systems. Its 2.81 Mbit of embedded memory is useful for line buffers and short frame-processing stages, while 448 I/O can expose parallel or serial video interfaces through suitable board-level transceivers. The 59,904 logic cells allow several processing stages to operate concurrently instead of time-multiplexing a smaller FPGA. A practical design should account for external memory bandwidth, clock-domain crossings, and the electrical requirements of the selected video interface.
おすすめ
Hardware Accelerator Subsystems
The XC4VLX60-11FFG668I is useful for legacy hardware-acceleration systems requiring concurrent fixed datapaths, control logic, and local buffering. Designers can map filters, cryptographic pipelines, or protocol accelerators into its 26,624 Adaptive Logic Modules and use 2.81 Mbit of block RAM for working sets and stream buffers. The -11 grade provides higher timing margin than -10 for demanding synchronous pipelines, but the 90 nm process should be considered when comparing power, clock rate, and silicon area against newer FPGA families. Migration usually requires a complete synthesis, place-and-route, and timing-signoff effort.
おすすめ
Aerospace and Defense Test Equipment
The XC4VLX60-11FFG668I can serve in test, simulation, and ground-support equipment that requires flexible logic, extensive I/O, and reconfigurable test sequences. Its 59,904 logic cells can host protocol engines, stimulus generators, data checks, and supervisory control, while 2.81 Mbit of embedded memory supports deterministic test buffers. The large 668-ball package provides routing flexibility for multichannel interfaces, but deployed equipment must use an assembly whose environmental qualification and configuration-control requirements are formally documented. Programming files, bitstream integrity, and lifecycle traceability should be managed as controlled configuration items.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC4VLX60-11FFG668I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC4VLX60-10FFG668I | XC4VLX60-12FFG668I | XC4VLX60-11FF668C | XC4VLX60-11FFG668C | XC4VLX60-11FF668I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 668-ball FBGA (FFG) | 668-ball FBGA (FFG) | 668-ball FBGA (FFG) | 668-ball FBGA (FF) | 668-ball FBGA (FFG) | 668-ball FBGA (FF) |
| FPGA Family | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX | Virtex-4 LX |
| Speed Grade | -11 | -10 | -12 | -11 | -11 | -11 |
| Logic Cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells | 59,904 cells |
| Logic Blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks | 6,656 blocks |
| Adaptive Logic Modules | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs | 26,624 ALMs |
| User I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O | 448 I/O |
| Embedded Memory | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit | 2.81 Mbit |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Nominal Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
主な差別化要因
- Higher speed grade within the same device family (vs XC4VLX60-10FFG668I)
- Direct package reuse for legacy board revisions (vs XC4VLX60-11FF668C)
- Substantial deterministic parallel-processing capacity (vs XC4VLX60-10FFG668I)
設計ノート
Implement the 668-ball footprint using the official AMD Virtex-4 package data and a production-tested BGA library for the exact FFG package. Confirm pad diameter, solder-mask opening, paste stencil, and copper-pad definitions against the package drawing rather than copying a generic 668-ball footprint. Because every ball can carry a power, configuration, clock, or user-I/O function, a single mapping error can prevent configuration or violate the power plane. Run an independent PCB-versus-CAD netlist comparison and inspect assembled boards with X-ray because solder joints are hidden beneath the package.
Use the manufacturer reference design to partition the 1.14 V to 1.26 V core-supply requirement, configuration rails, and I/O supplies. Place local bulk and high-frequency decoupling at the associated device power balls with short, low-inductance paths; avoid relying on distant plane connections to provide effective bypassing. Confirm regulator stability, startup sequencing, and power-consumption limits for the selected design. The 90 nm FPGA architecture does not eliminate thermal and delivery constraints, so validate the complete power tree at production temperature before releasing the PCB.
Route clocks, configuration signals, and high-speed I/O with controlled impedance and continuous reference planes, following the AMD board-design guidance for the selected I/O standard. Account for BGA breakout length, via stubs, package parasitics, and the electrical loading of external memory or transceivers. Differential and source-synchronous interfaces require matched routing and length compensation appropriate to the implemented standard. Perform post-route signal-integrity simulation with actual connector, package, and PCB models rather than relying only on placement and routing rule checks.
Do not treat a speed-grade substitution as a transparent production change. Moving from XC4VLX60-11FFG668I to the -10 grade reduces timing margin and requires a new timing-signoff run, while moving to -12 may change power behavior. Likewise, changing the ordering suffix can alter temperature, lifecycle, or lead-free conditions. Preserve the complete MPN in the approved BOM, lock programming files and bitstream hashes, and document any timing rerun, qualification result, and configuration compatibility review.
コンプライアンス情報
The Mouser product listing identifies the XC4VLX60-11FFG668I as Pb-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations were not stated for the exact MPN.