XC5VSX35T-2FFG665C - 34816-Cell Virtex-5 SXT FPGA | AMD
部品番号: XC5VSX35T-2FFG665C ✓ 生産中XC5VSX35T-2FFG665C 概要
A field-programmable gate array, or FPGA, is a programmable-logic semiconductor in which configurable logic blocks, programmable interconnect, and block RAM are combined on one integrated circuit. Within the device hierarchy, an FPGA belongs to the programmable-logic category, the broader semiconductor category, and the embedded-processing and accelerator ecosystem. The Virtex-5 SXT platform targets demanding parallel-processing designs that benefit from hardware parallelism, dedicated memories, and high-speed serial connectivity.
The XC5VSX35T combines 34,816 logic cells with 360 I/O in a single package. The 65 nm CMOS process generation and 1 V internal core voltage place it within the Virtex-5 architecture. The SXT designation identifies the large DSP and memory-oriented member of this family, supporting applications that need high-throughput fixed-point or floating-point processing, parallel datapaths, and programmable logic control. The commercial temperature suffix supports industrial and commercial equipment designs.
Programmable logic resources can be combined with dedicated block RAM and DSP arithmetic resources instead of relying only on sequential processor instructions. This architecture is useful for image and video pipelines, communications infrastructure, industrial control, test equipment, and accelerator prototypes. Because design timing and routing are architecture-dependent, system timing closure should be evaluated with the Vivado design suite under the intended clock, device, and operating conditions rather than inferred only from the logic-cell count.
The 665-pin FCBGA requires a complex multilayer PCB with fine-pitch routing, controlled power delivery, and a thermal design capable of removing the device's dissipated power. Signal integrity, power-plane integrity, via density, decoupling, and solder-mask-defined land patterns are critical to reliable operation. Use the package drawings, pinout tables, and high-density design guidelines in the Virtex-5 documentation when defining the schematic and layout.
This page combines the exact device identifiers, package information, replacement candidates, and practical PCB guidance in a compact engineering reference. Request a quote through the form on this page for current commercial availability and lot-level sourcing support.
ドロップイン代替品: XC5VSX35T-2FFG665C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC5VSX35T-2FFG665C (同一形状・フットプリント) — 相違点: Package, Speed Grade, Temperature Grade, Mounting Type, Device Type.
XC5VSX35T-2FFG665I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VSX35T-2FF665C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VSX35T-3FFG665C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VSX35T-1FFG665C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VSX35T-X1FFG665C
✅ ドロップイン価格はお問い合わせください
XC5VSX35T-2FFG665C 最大定格&電気的特性
| Device Type | Virtex-5 SXT Field-Programmable Gate Array (FPGA) |
| Logic Cells | 34,816 cells |
| User I/O | 360 I/O |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1 V |
| パッケージ | 665-pin FCBGA |
| Package Type | 665-BBGA, FCBGA |
| Device Family | Virtex-5 SXT |
| Speed Grade | -2 |
| Temperature Grade | C, commercial |
| Programmable Logic Type | FPGA |
| Architecture | Virtex-5 SXT |
| 実装タイプ | Surface Mount |
XC5VSX35T-2FFG665C 665-bbga, fcbga ピン配置ガイド
XC5VSX35T-2FFG665C (665-bbga, fcbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC5VSX35T-2FFG665C.
詳細は データシート をご参照ください。
主な用途
XC5VSX35T-2FFG665C の用途: 6 件s: Industrial Control and Automation, Digital Signal Processing Accelerators, Communications Infrastructure, Video and Image Processing Pipelines, Test and Measurement Equipment, Aerospace and High-Reliability Control Prototypes.
Industrial Control and Automation
The XC5VSX35T-2FFG665C suits industrial controllers that must execute multiple control and acquisition paths concurrently. Its 34,816 logic cells can host state machines, protocol handling, and safety interlocks, while 360 user I/O provide connections for sensors, actuators, encoders, and industrial communication transceivers. Using the FPGA beside a microcontroller allows time-critical tasks to execute deterministically without overloading the host processor. The -2 speed grade supports demanding control loops, while the 1 V core and 65 nm implementation place demanding thermal and power-delivery requirements on the board designer.
おすすめ
Digital Signal Processing Accelerators
The Virtex-5 SXT architecture makes the XC5VSX35T-2FFG665C appropriate for fixed-point and floating-point accelerator designs that benefit from parallel datapaths. Multiple DSP and logic resources can be combined into filters, transforms, and correlation engines while external processors manage control flow and data movement. The device's 34,816 logic cells and 360 I/O allow multiple accelerator channels to coexist on one FPGA. Design the clocking, memory bandwidth, and external data interfaces with Vivado timing analysis because achievable throughput depends heavily on the selected pipeline architecture and routing.
おすすめ
Communications Infrastructure
The XC5VSX35T-2FFG665C can implement parallel packet-processing, framing, filtering, and interface-conversion functions in communications equipment. Its 360 user I/O and large Virtex-5 SXT logic capacity permit multiple data paths and protocol engines to share a single device. Dedicated block RAM can hold packet queues and lookup structures, while programmable logic can implement interface adaptation. High-speed serial links require careful pin planning, clocking architecture, and signal-integrity analysis; use Vivado implementation reports to confirm timing for the target line rate.
おすすめ
Video and Image Processing Pipelines
The XC5VSX35T-2FFG665C is suitable for parallel image-processing pipelines that require sustained pixel or sample throughput. Logic resources can implement color conversion, thresholding, geometry transforms, and control logic, while dedicated memories buffer multiple image rows. The 360 I/O support video interfaces and external sensors when their electrical standards are compatible with the selected I/O banks. System-level partitioning between FPGA and processor should minimize high-bandwidth external traffic, and timing closure should be verified for the target pixel clock rather than estimated from device specifications alone.
おすすめ
Test and Measurement Equipment
Instrumentation and automated test systems can use the XC5VSX35T-2FFG665C to combine stimulus generation, pattern matching, timing control, and acquisition logic in a single programmable device. Its 34,816 logic cells allow several test channels and control engines to operate concurrently, while 360 I/O provide connections to instruments, DUT fixtures, and trigger logic. Dedicated memory resources support capture buffers and calibration tables. For laboratory equipment, isolate analog sections from the FPGA, use deterministic clocking, and validate every high-speed interface against its rise-time and channel-skew requirements.
おすすめ
Aerospace and High-Reliability Control Prototypes
The XC5VSX35T-2FFG665C can serve as the programmable core in control prototypes, monitoring systems, and data-processing subsystems where parallel logic and deterministic behavior are important. Its 360 I/O support sensor conditioning interfaces, status reporting, and redundant communication paths, while the SXT resources support control loops and co-processing. The C suffix denotes a commercial temperature class, so an aerospace deployment requires a qualification review and potentially a different temperature grade. Reliability planning must include derating, fault containment, configuration control, and the device-specific longevity and radiation requirements for the intended program.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC5VSX35T-2FFG665C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC5VSX35T-2FFG665I | XC5VSX35T-2FF665C | XC5VSX35T-3FFG665C | XC5VSX35T-1FFG665C | XC5VSX35T-X1FFG665C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 665-pin FCBGA | 665-pin FCBGA - same package family | 665-pin BGA - verify suffix-specific package drawing | 665-pin FCBGA - same | 665-pin FCBGA - same | 665-pin FCBGA - same |
| Device Family | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT |
| Logic Cells | 34,816 cells | 34,816 cells | 34,816 cells | 34,816 cells | 34,816 cells | 34,816 cells |
| User I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V | 1 V | 1 V |
| Speed Grade | -2 | -2 | -2 | -3 | -1 | X1 designation |
| Programmable Logic Type | FPGA | FPGA | FPGA | FPGA | FPGA | FPGA |
主な差別化要因
- Retains the -2 speed grade while offering an industrial-temperature family option (vs XC5VSX35T-2FFG665I)
- Provides a higher speed-grade option in the identical listed footprint (vs XC5VSX35T-3FFG665C)
- Maintains the original -2 speed grade for timing-sensitive redesigns (vs XC5VSX35T-1FFG665C)
- Matches the SXT resource and package configuration for board reuse (vs XC5VSX35T-1FFG665C)
設計ノート
The 665-pin FCBGA requires a multilayer PCB with fine-pitch escape routing, dense via arrays, and a power-delivery structure sized for the device's dynamic core current. Follow the manufacturer package and high-density design guidance for ball assignment, plane transitions, via-in-pad use, and solder-mask definition. Keep configuration, clock, and high-speed interface routing away from sensitive analog inputs, and verify every escape length against the selected I/O standard.
Treat the 1 V core and I/O supplies as a complete power-delivery design rather than a single generic rail. Provide the specified bulk and high-frequency decoupling at every supply ball group, minimize loop area between the device and capacitors, and control plane splits so simultaneous switching in one region does not disturb another. Generate a Vivado power report, apply the required derating, and verify that the power distribution network can supply transient current without violating voltage limits.
Estimate junction temperature from the implemented design's power report and the PCB-to-ambient thermal path. A 665-pin BGA has a small exposed-heat-spreader area but substantial local heat density, so small package size does not imply low thermal requirements. Use the manufacturer thermal model, preserve the recommended underside thermal-via pattern, avoid covering the thermal interface with an incompatible assembly process, and check the enclosure's worst-case ambient temperature.
Assign high-speed interfaces to banks whose voltage and performance capabilities match the selected I/O standard, and keep clock and data routing topology consistent across a channel pair. External memory, serializer, and network interfaces can be sensitive to row-to-row skew, so include board-level timing in the Vivado constraints. Use source-synchronous interfaces where appropriate and validate eye margin, crosstalk, and layer-transition performance during signal-integrity simulation.
Do not treat every XC5VSX35T suffix as interchangeable. Speed grade changes timing and power behavior, temperature grade changes environmental suitability, and package suffixes require exact confirmation against the manufacturer ball map and package drawings. Before releasing a substitute, rerun synthesis and implementation with the exact candidate selected, review static timing and power reports, and compare the new pin report against the original PCB netlist.
コンプライアンス情報
The commercial C suffix identifies the temperature class, not a compliance declaration. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not identified for this exact ordering code and require confirmation from the manufacturer or current regulatory documentation.