XC7K410T-2FFG676C - 400 I/O Kintex-7 FPGA | AMD
部品番号: XC7K410T-2FFG676C ✓ 生産中XC7K410T-2FFG676C 概要
A Kintex-7 FPGA is a configurable semiconductor in the FPGA and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, its digital logic, block resources, and I/O can be configured after manufacture. AMD positions the Kintex-7 family around the balance between logic density, high-speed connectivity, DSP capability, and cost, supporting workloads such as network infrastructure, industrial processing, test equipment, and high-bandwidth signal processing.
The XC7K410T-2FFG676C combines 400 user I/O with the -2 performance grade in the 676-ball FCBGA package. The commercial C suffix identifies a commercial-temperature configuration, and cross-reference information identifies its operating range as 0 °C to +85 °C. Its 28 nm implementation is the foundation for the Kintex-7 family's performance-per-watt positioning and supports integration of programmable logic, DSP, memory, and high-speed serial interfaces.
The -2 speed grade provides a defined performance class within the Kintex-7 portfolio. Designers should use the AMD datasheet, package pinout files, and UG475 guidance to verify timing constraints, bank voltage compatibility, configuration requirements, pin assignments, and supported interfaces for the exact board revision. Because an FPGA design depends on routing and timing closure rather than a fixed analog performance curve, the final operating frequency and power consumption depend on the implemented logic, utilization, clocking, memory access pattern, I/O activity, and thermal environment.
Typical applications include optical transport and packet-processing equipment, industrial automation controllers, high-speed data acquisition, broadcast and communications infrastructure, defense-oriented signal processing, and accelerator prototyping. The 400 available user I/O supports systems combining multiple high-speed interfaces with moderate parallel logic connectivity, while the large logic capacity is appropriate for protocol stacks, datapath processing, DSP pipelines, and control logic.
PCB implementation requires careful treatment of the 676-ball package. Follow the AMD package pinout files and UG475 for the exact ball map, and preserve the required power, ground, decoupling, configuration, clock, and high-speed routing requirements. This page combines the confirmed device attributes, documented package alternatives, comparison guidance, and practical design checks needed to evaluate the XC7K410T-2FFG676C before schematic and PCB signoff.
ドロップイン代替品: XC7K410T-2FFG676C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7K410T-2FFG676C (同一形状・フットプリント) — 相違点: Package, Core Voltage, Temperature Grade, Speed Grade, Device Type.
XC7K410T-2FFG676I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7K410T-2FBG676I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7K410T-2FF676C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7K410T-1FFG676C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC7K410T-3FFG676C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7K410T-2FFG676C 最大定格&電気的特性
| Device Type | Kintex-7 field-programmable gate array (FPGA) |
| Process Technology | 28 nm |
| User I/O Count | 400 I/O |
| パッケージ | 676-BBGA FCBGA |
| Package Dimensions | 27 × 27 mm |
| Speed Grade | -2 |
| Temperature Grade | Commercial |
| 動作温度範囲 | 0 °C to +85 °C |
| 実装タイプ | Surface mount |
| Product Family | Kintex-7 |
| Supported High-Speed Interface | PCIe Gen3 |
| Supported High-Speed Network | 10 Gigabit Ethernet |
| Lead-Free Status | Lead free |
XC7K410T-2FFG676C 27 × 27 mm ピン配置ガイド
XC7K410T-2FFG676C (27 × 27 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7K410T-2FFG676C.
詳細は データシート をご参照ください。
主な用途
XC7K410T-2FFG676C の用途: 6 件s: 10 Gigabit Ethernet Network Equipment, PCIe Gen3 Endpoint and Control Systems, Industrial Automation and Control, High-Speed Data Acquisition, DSP and Signal Processing Pipelines, Communications and Broadcast Infrastructure.
10 Gigabit Ethernet Network Equipment
The AMD XC7K410T-2FFG676C fits network-interface and packet-processing systems that need programmable datapaths, protocol logic, and high external connectivity. Its 400 user I/O provides resources for high-speed serial interfaces and parallel control paths, while the Kintex-7 family's 28 nm process supports the family's best price-performance-per-watt positioning. AMD specifically identifies 10 Gigabit Ethernet as a mainstream Kintex-7 application. In implementation, engineers use the -2 grade for timing analysis, assign compatible I/O banks and transceiver resources, and use the manufacturer package files to preserve ball assignments. Actual throughput depends on the selected I/O resources, reference clock, board signal integrity, and timing closure.
おすすめ
PCIe Gen3 Endpoint and Control Systems
XC7K410T-2FFG676C is appropriate for PCIe Gen3 endpoint, bridge, and accelerator-control designs that combine serial connectivity with substantial programmable logic. The device provides 400 user I/O in a 27 × 27 mm 676-ball FCBGA package and uses the -2 speed grade for established Kintex-7 timing analysis. AMD identifies PCIe Gen3 support as a principal family capability. Designers should select the correct transceiver-capable banks, define reference clocks, and complete board-level channel compliance and timing analysis. The -2 designation describes the device performance class, while achievable lane rate and latency remain functions of the complete design.
おすすめ
Industrial Automation and Control
The XC7K410T-2FFG676C supports industrial automation when the required ambient and enclosure temperature remain inside its 0 °C to +85 °C commercial range. Its 400 user I/O can accommodate digital machine-control signals, communications interfaces, timing inputs, and external memory or sensor connections, while the programmable logic allows multiple control functions to be consolidated. For deployments extending to −40 °C to +100 °C, XC7K410T-2FFG676I provides the corresponding industrial-grade option in the same documented footprint. Engineers must still perform thermal, power-integrity, EMC, and safety analysis for the finished industrial equipment.
おすすめ
High-Speed Data Acquisition
XC7K410T-2FFG676C can be used in high-speed acquisition systems where parallel sensor data must be captured, filtered, timestamped, and transferred. Its 400 user I/O offers substantial connectivity for sampling interfaces, clocks, triggers, and data-processing links, while the programmable architecture allows pipelines and DSP functions to be adapted without changing the board. The -2 speed grade supports a defined Kintex-7 performance class, but real sample-rate and channel-count requirements must be validated through timing analysis and pin planning. Designers should pay particular attention to bank voltage limits, clock jitter, ground-return paths, and simultaneous-switching-noise margins.
おすすめ
DSP and Signal Processing Pipelines
The AMD XC7K410T-2FFG676C is well matched to configurable DSP pipelines, digital filtering, modulation, and real-time signal-processing prototypes. Kintex-7 combines programmable logic with DSP and memory resources in a 28 nm device, while this configuration supplies 400 user I/O for parallel data movement and control. The -2 grade is appropriate for designs requiring more timing margin than the -1 class, subject to normal implementation results. Engineers should map DSP slices, block RAM, clocks, and high-speed interfaces early, then use timing-constrained implementation reports to verify the pipeline before releasing the PCB layout.
おすすめ
Communications and Broadcast Infrastructure
XC7K410T-2FFG676C supports communications equipment requiring high I/O density, programmable protocol handling, and flexible datapath logic. Its 676-ball FCBGA package and 400 user I/O suit interfaces that exceed the connectivity of smaller FPGAs, while the commercial C grade targets systems operating from 0 °C to +85 °C. A manufacturer-designated Kintex-7 platform can consolidate high-speed transceivers, packet processing, and control functions into one programmable device. Final board qualification still requires independent clock, power, signal-integrity, and thermal reviews. Use the manufacturer package pinout files to ensure each I/O bank and power rail is assigned correctly.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7K410T-2FFG676C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7K410T-2FFG676I | XC7K410T-2FBG676I | XC7K410T-2FF676C | XC7K410T-1FFG676C | XC7K410T-3FFG676C |
|---|---|---|---|---|---|---|
| Package | 676-BBGA FCBGA, 27 × 27 mm | 676-BBGA FCBGA, 27 × 27 mm | 676-BBGA FCBGA | 676-ball FCBGA family package | 676-ball FCBGA family package | 676-ball FCBGA family package |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -2 | -2 | -2 | -2 | -1 | -3 |
| Temperature Grade | Commercial, 0 °C to +85 °C | Industrial, −40 °C to +100 °C | Industrial suffix I | Commercial suffix C | Commercial suffix C | Commercial suffix C |
| Logic Density | Kintex-7 XC7K410T device | Same XC7K410T device | Same XC7K410T device | Same XC7K410T device | Same XC7K410T device | Same XC7K410T device |
| Key Family Feature | PCIe Gen3 and 10 Gigabit Ethernet support at family level | Kintex-7 family feature set | Kintex-7 family feature set | Kintex-7 family feature set | Kintex-7 family feature set | Kintex-7 family feature set |
主な差別化要因
- Exact commercial-temperature configuration (vs XC7K410T-2FFG676I)
- 400 user I/O in a 27 × 27 mm footprint (vs XC7K410T-2FBG676I)
- Balanced -2 speed grade (vs XC7K410T-1FFG676C)
- Commercial grade avoids unnecessary industrial temperature qualification (vs XC7K410T-2FFG676I)
設計ノート
Use the AMD Kintex-7 package device pinout files and UG475 as the authority for all 676 ball assignments. The manufacturer distributes the package archive in TXT and CSV formats for automated comparison with the schematic and PCB layout. Pay particular attention to configuration pins, power balls, dedicated reference-clock balls, high-speed transceiver pins, and I/O-bank boundaries. A visually similar 676-ball package should not be accepted without an exact ball-map comparison.
Plan the power architecture before placement and routing because the 676-ball FCBGA requires multiple supply rails, adequate current capacity, and low-impedance distribution. Use the manufacturer power-supply recommendations and separate high-current and sensitive-reference paths where directed. Place decoupling capacitance at the prescribed locations, preserve the recommended topology, and verify voltage sequencing, droop, ripple, and startup behavior across every operating mode.
Treat the 27 × 27 mm FCBGA as a thermal design problem rather than assuming that the package alone removes all heat. Evaluate total dynamic power against the implemented logic, clocking, DSP activity, memory use, and I/O workload. Provide copper and thermal-via structures consistent with the manufacturer's layout guidance, then confirm junction-temperature and board-performance margins in the final mechanical assembly and operating environment.
Assign high-speed interfaces only after reviewing the device's bank and transceiver constraints, then constrain clock and data paths in the implementation flow. Account for reference-clock jitter, package-ball transitions, connector or module loss, return paths, and simultaneous switching noise. The 400 user I/O count does not imply that every pin can operate at the same voltage or speed, so verify bank-level electrical constraints before freezing the schematic.
Do not substitute only by matching the 'XC7K410T' base name. The speed grade, package suffix, temperature suffix, substrate option, lifecycle status, and exact ball map can differ. XC7K410T-2FFG676I is the closest documented drop-in candidate because its footprint, I/O count, and -2 grade match, but its industrial temperature range differs. For every proposed alternative, compare the exact ordering code against the AMD package files and confirm bitstream, timing, and configuration compatibility.
コンプライアンス情報
The target is identified as lead-free. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.