XC5VSX50T-1FFG665C - 52,224-Cell Virtex-5 SXT FPGA | AMD
部品番号: XC5VSX50T-1FFG665C ✓ 生産中XC5VSX50T-1FFG665C 概要
An FPGA is a programmable logic device whose digital circuits are defined through configuration bitstreams rather than fixed logic masks. Within the semiconductor hierarchy, an FPGA sits between fixed-function logic and application-specific integrated circuits. The Virtex-5 SXT family is designed for high-performance programmable logic, DSP-intensive signal processing, networking, communications, industrial control, and test equipment. Its large logic-cell count supports parallel architectures, control planes, packet processing, and custom accelerator functions on a single device.
The XC5VSX50T provides 52,224 logic cells and 4,080 logic blocks for combinational and sequential logic. The 360 I/O positions support interfaces to external memory, transceivers, clocks, data converters, and board-level peripherals. According to the AMD package and product information, the device uses 65 nm CMOS technology and a 1 V core architecture. Its 665-ball FCBGA package supports dense board routing while keeping the device compatible with high-pin-count FPGA design practices.
Programmable resources are configured through a bitstream that defines interconnect paths and logic functions. The exact RAM capacity, DSP count, transceiver configuration, supported I/O standards, maximum clock performance, and power characteristics must be confirmed in the family datasheet and the device-specific configuration tables before a design is released. These values are especially important when planning memory bandwidth, timing closure, power budgeting, and board-level connectivity.
Typical applications include network packet-processing systems, industrial automation controllers, communications infrastructure, test and measurement platforms, embedded signal-processing subsystems, and high-speed interface bridges. Its 360 I/O and 52,224 logic cells make it suitable for designs combining substantial parallel logic with multiple external interfaces. The -1 speed designation and commercial temperature range fit equipment operating from 0°C to 85°C.
Board design should use the AMD Virtex-5 package pinout files, preserve the required power and ground distribution, and validate every high-speed interface against the selected I/O standard. Configuration storage, clocking, decoupling, and JTAG access must also be checked against the Virtex-5 design guidance. Before substituting this device, verify package ball assignments, supported configuration files, power sequencing, and the exact logic, RAM, DSP, and transceiver resources used by the design.
This page combines package, logic-resource, voltage, temperature, I/O, and sourcing information with replacement analysis and practical implementation guidance. Use it to identify the correct FPGA and plan a pin-compatible, thermally viable, resource-complete implementation.
ドロップイン代替品: XC5VSX50T-1FFG665C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC5VSX50T-1FFG665C (同一形状・フットプリント) — 相違点: Device Type, Package, Logic Cells, Process Technology, Operating Temperature Range.
XC5VSX50T-1FFG665I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VSX50T-1FF665I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VSX50T-1FFG665CES
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC5VSX50T-2FF665C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC5VSX50T-1FFG665C 最大定格&電気的特性
| Device Type | Virtex-5 SXT Field Programmable Gate Array (FPGA) |
| Logic Cells | 52,224 cells |
| Logic Blocks | 4,080 LABs |
| Input/Output Count | 360 I/O |
| Inputs | 360 inputs |
| Outputs | 360 outputs |
| Nominal Number of Gates | 50,000 gates |
| Core Supply Voltage | 1.05 V |
| Operating Supply Voltage Range | 0.95 V to 1.05 V |
| Process Technology | 65 nm CMOS |
| 動作温度範囲 | 0°C to 85°C |
| パッケージ | 665-ball FCBGA |
| Number of Package Balls | 665 balls |
| 実装タイプ | Surface Mount |
| Lead-Free Status | Lead Free |
| RoHS ステータス | RoHS Compliant |
| Embedded RAM Capacity | 594 B |
XC5VSX50T-1FFG665C 665 balls ピン配置ガイド
XC5VSX50T-1FFG665C (665 balls パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC5VSX50T-1FFG665C.
詳細は データシート をご参照ください。
主な用途
XC5VSX50T-1FFG665C の用途: 6 件s: Network Packet Processing, Industrial Automation Controller, Communications Infrastructure, Test and Measurement Equipment, DSP-Accelerated Signal Processing, Embedded Control and Protocol Bridge.
Network Packet Processing
The XC5VSX50T-1FFG665C is well suited to network packet processing because its 52,224 logic cells and 4,080 logic blocks can implement parallel classification, queue, header-processing, and traffic-management functions. The 360 I/O provide substantial connectivity for packet memories, status interfaces, and board-level control logic. A design can use the programmable fabric for time-critical datapaths while using dedicated resources for serial links. Actual throughput and memory bandwidth depend on the selected Virtex-5 SXT resources, clocking plan, I/O standards, and pin placement, so timing closure must be verified against the actual design rather than inferred only from the 360-I/O count.
おすすめ
Industrial Automation Controller
The XC5VSX50T-1FFG665C can serve as the central programmable controller in an industrial automation system requiring 360 user I/O, parallel control logic, and deterministic internal processing. Its 52,224 logic cells can combine machine sequencing, interlocks, data acquisition, diagnostics, and communications protocols within one device. The stated 0°C to 85°C operating range covers many commercial industrial environments, but deployed systems may require stricter EMC, surge, vibration, or extended-temperature controls. Use the AMD package files for all 665-ball assignments and design the power distribution so that core, configuration, and I/O supplies remain within their respective limits under industrial transients.
おすすめ
Communications Infrastructure
The XC5VSX50T-1FFG665C fits communications infrastructure designs that require parallel packet handling, framing, error control, and multiple board interfaces in a single FPGA. Its 360 I/O can connect the programmable fabric to transceivers, memory devices, and control processors, while the 52,224 logic cells support concurrent datapaths. Virtex-5 SXT devices can also provide specialized DSP and serial capabilities, although the exact resource inventory must be confirmed for this ordering code. High-speed interfaces demand disciplined clocking, controlled-impedance routing, solid power-plane distribution, and careful separation between sensitive clock paths and noisy data paths to preserve timing and signal integrity.
おすすめ
Test and Measurement Equipment
The XC5VSX50T-1FFG665C can implement a flexible instrument datapath in test and measurement equipment because its 52,224 logic cells support timing control, pattern generation, acquisition logic, and protocol analysis in parallel. The 360 I/O provide a practical interface count for stimulus, response capture, clock distribution, and trigger systems. A reusable FPGA-based architecture allows the instrument logic to evolve through configuration rather than redesign of a fixed ASIC. For sensitive analog measurements, isolate the FPGA power and ground paths appropriately, use deterministic clocking, and place interface protection close to connectors. The device is a digital processing element, so analog front-end design remains separate from the FPGA implementation.
おすすめ
DSP-Accelerated Signal Processing
The XC5VSX50T-1FFG665C is appropriate for a signal-processing subsystem that benefits from parallel arithmetic, programmable filtering, and deterministic data movement. The Virtex-5 SXT family includes dedicated DSP resources, allowing arithmetic-heavy pipelines to coexist with control logic on the same device. The target has 4,080 logic blocks and 52,224 logic cells, providing substantial implementation capacity beyond the DSP slices. Exact throughput depends on the number of DSP slices, available block RAM, clock speed, and data format, so the design must be partitioned according to the official device resource tables. Power and heat flow should also be evaluated because sustained DSP and serial activity can substantially increase switching activity.
おすすめ
Embedded Control and Protocol Bridge
The XC5VSX50T-1FFG665C can act as a hardware protocol bridge between processors, memories, and custom peripherals, using its 360 I/O to implement multiple parallel or serial-facing interfaces. The programmable fabric is useful for protocol conversion, buffering, timing isolation, and hardware-assisted control that would otherwise burden a host processor. The 52,224 logic cells allow several bridge channels to operate concurrently, subject to the selected I/O standards and clocking resources. Because the device is a large 665-ball FCBGA, layout should prioritize short escape paths from the BGA, continuous power and ground planes, and matched-length routing for any source-synchronous interfaces. Configuration retention and startup behavior must also be integrated into the system architecture.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC5VSX50T-1FFG665C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC5VSX50T-1FFG665I | XC5VSX50T-1FF665I | XC5VSX50T-1FFG665CES | XC5VSX50T-2FF665C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 665-ball FCBGA | 665-ball FCBGA | 665-ball FCBGA | 665-ball FCBGA | 665-ball FCBGA |
| FPGA Family | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT |
| Speed Grade | -1 | -1 | -1 | -1 | -2 |
| Special Ordering Suffix | C commercial-grade suffix | I industrial-grade suffix | I industrial-grade suffix | CES suffix | C commercial-grade suffix |
主な差別化要因
- High-density programmable logic in a 665-ball FCBGA (vs XC5VSX50T-2FFG1136C)
- Commercial-temperature configuration aligned with the exact target ordering code (vs XC5VSX50T-1FFG665I)
- Lower speed grade preserves the target timing and power design point (vs XC5VSX50T-2FF665C)
設計ノート
Use the AMD Virtex-5 package device pinout files for the exact XC5VSX50T-1FFG665C ordering code and the applicable 665-ball FCBGA drawing. Treat power, ground, configuration, clock, transceiver, and user-I/O balls as a single connected assignment problem because an incorrect BGA escape route can create expensive respins. Confirm the board stack-up, ball-pad geometry, solder-mask definition, via-in-pad policy, and assembly capability with the package documentation.
Design the core, auxiliary, configuration, and I/O supplies as a complete power tree rather than relying only on the stated 0.95 V to 1.05 V core range. Place decoupling and bulk capacitance close to the relevant package balls, preserve uninterrupted ground planes, and follow the recommended startup and sequencing behavior from the Virtex-5 power guidance. Verify steady-state and transient behavior with the estimated design utilization because an idle device and a fully utilized FPGA can have substantially different dynamic demand.
Create a BGA escape strategy that separates clock inputs from high-speed data paths and avoids routing sensitive nets beneath switching or power-conversion sections when the stack-up permits it. Use controlled-impedance rules for every external interface, keep configuration and JTAG routing away from noisy analog or switching nodes, and include test access for debugging. After placement, run signal-integrity and power-integrity analysis on the actual layer stack-up rather than on a generic package outline.
Do not treat every XC5VSX50T ordering code as an automatic drop-in replacement. The -1 and -2 suffixes alter speed grade, C and I alter commercial versus industrial temperature positioning, and the G or non-G package markers can identify different 665-ball constructions. Confirm the exact package outline, ball map, supported configuration method, timing limits, and resource use before changing the bill of materials or releasing a replacement to production.
コンプライアンス情報
The product listing identifies RoHS-compliant and lead-free construction. No automotive qualification, REACH declaration, halogen-free declaration, or conflict-minerals statement is established.