XC5VSX50T-1FFG665C - 52,224-Cell Virtex-5 SXT FPGA | AMD
MPN: XC5VSX50T-1FFG665C ✓ 啟用中XC5VSX50T-1FFG665C 概覽
An FPGA is a programmable logic device whose digital circuits are defined through configuration bitstreams rather than fixed logic masks. Within the semiconductor hierarchy, an FPGA sits between fixed-function logic and application-specific integrated circuits. The Virtex-5 SXT family is designed for high-performance programmable logic, DSP-intensive signal processing, networking, communications, industrial control, and test equipment. Its large logic-cell count supports parallel architectures, control planes, packet processing, and custom accelerator functions on a single device.
The XC5VSX50T provides 52,224 logic cells and 4,080 logic blocks for combinational and sequential logic. The 360 I/O positions support interfaces to external memory, transceivers, clocks, data converters, and board-level peripherals. According to the AMD package and product information, the device uses 65 nm CMOS technology and a 1 V core architecture. Its 665-ball FCBGA package supports dense board routing while keeping the device compatible with high-pin-count FPGA design practices.
Programmable resources are configured through a bitstream that defines interconnect paths and logic functions. The exact RAM capacity, DSP count, transceiver configuration, supported I/O standards, maximum clock performance, and power characteristics must be confirmed in the family datasheet and the device-specific configuration tables before a design is released. These values are especially important when planning memory bandwidth, timing closure, power budgeting, and board-level connectivity.
Typical applications include network packet-processing systems, industrial automation controllers, communications infrastructure, test and measurement platforms, embedded signal-processing subsystems, and high-speed interface bridges. Its 360 I/O and 52,224 logic cells make it suitable for designs combining substantial parallel logic with multiple external interfaces. The -1 speed designation and commercial temperature range fit equipment operating from 0°C to 85°C.
Board design should use the AMD Virtex-5 package pinout files, preserve the required power and ground distribution, and validate every high-speed interface against the selected I/O standard. Configuration storage, clocking, decoupling, and JTAG access must also be checked against the Virtex-5 design guidance. Before substituting this device, verify package ball assignments, supported configuration files, power sequencing, and the exact logic, RAM, DSP, and transceiver resources used by the design.
This page combines package, logic-resource, voltage, temperature, I/O, and sourcing information with replacement analysis and practical implementation guidance. Use it to identify the correct FPGA and plan a pin-compatible, thermally viable, resource-complete implementation.
直接替換替代品,適用於 XC5VSX50T-1FFG665C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC5VSX50T-1FFG665C (相同外形與佔位) — 差異在於 Device Type, Package, Logic Cells, Process Technology, Operating Temperature Range.
XC5VSX50T-1FFG665I
✅ 直接替換聯絡詢價
查看資料表 →XC5VSX50T-1FF665I
✅ 直接替換聯絡詢價
查看資料表 →XC5VSX50T-1FFG665CES
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VSX50T-2FF665C
✅ 直接替換聯絡詢價
查看資料表 →XC5VSX50T-1FFG665C 最大額定值與電氣特性
| Device Type | Virtex-5 SXT Field Programmable Gate Array (FPGA) |
| Logic Cells | 52,224 cells |
| Logic Blocks | 4,080 LABs |
| Input/Output Count | 360 I/O |
| Inputs | 360 inputs |
| Outputs | 360 outputs |
| Nominal Number of Gates | 50,000 gates |
| Core Supply Voltage | 1.05 V |
| Operating Supply Voltage Range | 0.95 V to 1.05 V |
| Process Technology | 65 nm CMOS |
| 工作溫度範圍 | 0°C to 85°C |
| 封裝 | 665-ball FCBGA |
| Number of Package Balls | 665 balls |
| 安裝類型 | Surface Mount |
| Lead-Free Status | Lead Free |
| RoHS 狀態 | RoHS Compliant |
| Embedded RAM Capacity | 594 B |
XC5VSX50T-1FFG665C 665 balls 腳位配置指南
XC5VSX50T-1FFG665C(665 balls 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC5VSX50T-1FFG665C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC5VSX50T-1FFG665C 適用於 6 應用s: Network Packet Processing, Industrial Automation Controller, Communications Infrastructure, Test and Measurement Equipment, DSP-Accelerated Signal Processing, Embedded Control and Protocol Bridge.
Network Packet Processing
The XC5VSX50T-1FFG665C is well suited to network packet processing because its 52,224 logic cells and 4,080 logic blocks can implement parallel classification, queue, header-processing, and traffic-management functions. The 360 I/O provide substantial connectivity for packet memories, status interfaces, and board-level control logic. A design can use the programmable fabric for time-critical datapaths while using dedicated resources for serial links. Actual throughput and memory bandwidth depend on the selected Virtex-5 SXT resources, clocking plan, I/O standards, and pin placement, so timing closure must be verified against the actual design rather than inferred only from the 360-I/O count.
推薦
Industrial Automation Controller
The XC5VSX50T-1FFG665C can serve as the central programmable controller in an industrial automation system requiring 360 user I/O, parallel control logic, and deterministic internal processing. Its 52,224 logic cells can combine machine sequencing, interlocks, data acquisition, diagnostics, and communications protocols within one device. The stated 0°C to 85°C operating range covers many commercial industrial environments, but deployed systems may require stricter EMC, surge, vibration, or extended-temperature controls. Use the AMD package files for all 665-ball assignments and design the power distribution so that core, configuration, and I/O supplies remain within their respective limits under industrial transients.
推薦
Communications Infrastructure
The XC5VSX50T-1FFG665C fits communications infrastructure designs that require parallel packet handling, framing, error control, and multiple board interfaces in a single FPGA. Its 360 I/O can connect the programmable fabric to transceivers, memory devices, and control processors, while the 52,224 logic cells support concurrent datapaths. Virtex-5 SXT devices can also provide specialized DSP and serial capabilities, although the exact resource inventory must be confirmed for this ordering code. High-speed interfaces demand disciplined clocking, controlled-impedance routing, solid power-plane distribution, and careful separation between sensitive clock paths and noisy data paths to preserve timing and signal integrity.
推薦
Test and Measurement Equipment
The XC5VSX50T-1FFG665C can implement a flexible instrument datapath in test and measurement equipment because its 52,224 logic cells support timing control, pattern generation, acquisition logic, and protocol analysis in parallel. The 360 I/O provide a practical interface count for stimulus, response capture, clock distribution, and trigger systems. A reusable FPGA-based architecture allows the instrument logic to evolve through configuration rather than redesign of a fixed ASIC. For sensitive analog measurements, isolate the FPGA power and ground paths appropriately, use deterministic clocking, and place interface protection close to connectors. The device is a digital processing element, so analog front-end design remains separate from the FPGA implementation.
推薦
DSP-Accelerated Signal Processing
The XC5VSX50T-1FFG665C is appropriate for a signal-processing subsystem that benefits from parallel arithmetic, programmable filtering, and deterministic data movement. The Virtex-5 SXT family includes dedicated DSP resources, allowing arithmetic-heavy pipelines to coexist with control logic on the same device. The target has 4,080 logic blocks and 52,224 logic cells, providing substantial implementation capacity beyond the DSP slices. Exact throughput depends on the number of DSP slices, available block RAM, clock speed, and data format, so the design must be partitioned according to the official device resource tables. Power and heat flow should also be evaluated because sustained DSP and serial activity can substantially increase switching activity.
推薦
Embedded Control and Protocol Bridge
The XC5VSX50T-1FFG665C can act as a hardware protocol bridge between processors, memories, and custom peripherals, using its 360 I/O to implement multiple parallel or serial-facing interfaces. The programmable fabric is useful for protocol conversion, buffering, timing isolation, and hardware-assisted control that would otherwise burden a host processor. The 52,224 logic cells allow several bridge channels to operate concurrently, subject to the selected I/O standards and clocking resources. Because the device is a large 665-ball FCBGA, layout should prioritize short escape paths from the BGA, continuous power and ground planes, and matched-length routing for any source-synchronous interfaces. Configuration retention and startup behavior must also be integrated into the system architecture.
推薦
推薦產品摘要
工程參考資料,適用於 XC5VSX50T-1FFG665C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC5VSX50T-1FFG665I | XC5VSX50T-1FF665I | XC5VSX50T-1FFG665CES | XC5VSX50T-2FF665C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 665-ball FCBGA | 665-ball FCBGA | 665-ball FCBGA | 665-ball FCBGA | 665-ball FCBGA |
| FPGA Family | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT | Virtex-5 SXT |
| Speed Grade | -1 | -1 | -1 | -1 | -2 |
| Special Ordering Suffix | C commercial-grade suffix | I industrial-grade suffix | I industrial-grade suffix | CES suffix | C commercial-grade suffix |
主要差異化特點
- High-density programmable logic in a 665-ball FCBGA (對比XC5VSX50T-2FFG1136C)
- Commercial-temperature configuration aligned with the exact target ordering code (對比XC5VSX50T-1FFG665I)
- Lower speed grade preserves the target timing and power design point (對比XC5VSX50T-2FF665C)
設計說明
Use the AMD Virtex-5 package device pinout files for the exact XC5VSX50T-1FFG665C ordering code and the applicable 665-ball FCBGA drawing. Treat power, ground, configuration, clock, transceiver, and user-I/O balls as a single connected assignment problem because an incorrect BGA escape route can create expensive respins. Confirm the board stack-up, ball-pad geometry, solder-mask definition, via-in-pad policy, and assembly capability with the package documentation.
Design the core, auxiliary, configuration, and I/O supplies as a complete power tree rather than relying only on the stated 0.95 V to 1.05 V core range. Place decoupling and bulk capacitance close to the relevant package balls, preserve uninterrupted ground planes, and follow the recommended startup and sequencing behavior from the Virtex-5 power guidance. Verify steady-state and transient behavior with the estimated design utilization because an idle device and a fully utilized FPGA can have substantially different dynamic demand.
Create a BGA escape strategy that separates clock inputs from high-speed data paths and avoids routing sensitive nets beneath switching or power-conversion sections when the stack-up permits it. Use controlled-impedance rules for every external interface, keep configuration and JTAG routing away from noisy analog or switching nodes, and include test access for debugging. After placement, run signal-integrity and power-integrity analysis on the actual layer stack-up rather than on a generic package outline.
Do not treat every XC5VSX50T ordering code as an automatic drop-in replacement. The -1 and -2 suffixes alter speed grade, C and I alter commercial versus industrial temperature positioning, and the G or non-G package markers can identify different 665-ball constructions. Confirm the exact package outline, ball map, supported configuration method, timing limits, and resource use before changing the bill of materials or releasing a replacement to production.
合規資訊
The product listing identifies RoHS-compliant and lead-free construction. No automotive qualification, REACH declaration, halogen-free declaration, or conflict-minerals statement is established.