XC6SLX75-N3CSG484I - Spartan-6 LX FPGA, 74,637 LE | AMD
部品番号: XC6SLX75-N3CSG484I ✓ 生産中XC6SLX75-N3CSG484I 概要
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and peripherals can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, while its parallel architecture is well suited to parallel data processing, interface bridging, control logic, and signal acquisition. The Spartan-6 LX family combines configurable logic blocks, block RAM, DSP slices, and high-speed I/O in an integrated silicon platform.
Key resources include 5,831 logic blocks, 328 user I/O pins, and 3,170,304 total RAM bits. The -N3 grade targets designs requiring higher performance than lower Spartan-6 speed grades, while the industrial temperature rating permits deployment across industrial and extended commercial environments. The 484-CSPBGA package provides dense external connectivity but requires careful escape routing, multilayer PCB construction, and adequate thermal management.
The device supports programmable logic and memory resources for designs requiring parallel throughput, deterministic interfaces, and configurable I/O standards. Its block RAM can support packet buffering, data acquisition, waveform storage, and general-purpose data processing. The DSP resources can accelerate multiply-accumulate operations, while the large I/O count supports memory interfaces, parallel buses, high-speed serial links, and external peripheral connections.
Typical uses include industrial control, test and measurement, networking equipment, video processing, communications infrastructure, embedded systems, and high-speed signal-processing modules. The 484-ball package is especially appropriate for designs that need substantially more I/O and memory capacity than a small FPGA or CPLD while retaining a single-package implementation.
PCB design should follow the AMD Spartan-6 package and pinout files, using the exact ball assignments for power, ground, configuration, clock, and user I/O. A multilayer board with short ground references, controlled impedance routing, and a dedicated power-distribution network is appropriate for this high-pin-count BGA. Configuration storage and startup behavior must also be checked against the device's supported configuration modes.
This page combines the exact device identity, package information, logic and memory resources, temperature range, drop-in family alternatives, comparison parameters, and implementation guidance. It is intended to help engineers identify whether the XC6SLX75-N3CSG484I fits a new design or an existing Spartan-6 LX board revision.
ドロップイン代替品: XC6SLX75-N3CSG484I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC6SLX75-N3CSG484I (同一形状・フットプリント) — 相違点: Package Type, Speed Grade, Mounting Type, Adaptive Logic Modules, Device Type.
XC6SLX75-3CSG484I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC6SLX75-2CSG484I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC6SLX75-L1CSG484I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC6SLX75-2CSG484C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC6SLX75T-N3CSG484I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC6SLX75-N3CSG484I 最大定格&電気的特性
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-6 LX |
| Logic Elements | 74,637 |
| Logic Blocks | 5,831 |
| Total RAM Bits | 3,170,304 bits |
| User I/O Pins | 328 |
| Package Type | 484-CSPBGA |
| Package Dimensions | 19 x 19 mm |
| 実装タイプ | Surface Mount |
| 動作温度 | -40°C to +100°C |
| Speed Grade | -N3 |
| Temperature Grade | Industrial |
| Device Type Code | 3170304 |
| Manufacturer Product Number | 74637 |
XC6SLX75-N3CSG484I 19 x 19 mm ピン配置ガイド
XC6SLX75-N3CSG484I (19 x 19 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC6SLX75-N3CSG484I.
詳細は データシート をご参照ください。
主な用途
XC6SLX75-N3CSG484I の用途: 6 件s: Industrial Control Systems, Test and Measurement Instruments, Networking and Packet Processing, Communications Infrastructure, Video and Image Processing, Aerospace and Defense Control.
Industrial Control Systems
The XC6SLX75-N3CSG484I fits industrial controllers that need deterministic parallel processing, extensive I/O, and extended-temperature operation. Its 74,637 logic elements and 5,831 logic blocks can host sequencing logic, machine-state control, diagnostics, and communication protocols, while 3,170,304 RAM bits support local buffers and trace records. The -40°C to +100°C industrial range suits equipment operating beyond ordinary commercial-temperature limits. With 328 user I/O in the 484-CSPBGA package, the device can connect sensors, actuators, encoders, field buses, and service interfaces without splitting control functions across multiple devices.
おすすめ
Test and Measurement Instruments
The XC6SLX75-N3CSG484I is appropriate for acquisition and control instruments requiring parallel sampling logic, configurable test interfaces, and local data storage. The 5,831 logic blocks can implement control sequencing, protocol engines, and digital filtering, while the device's 3,170,304 RAM bits can be partitioned into acquisition buffers and communication FIFOs. Its 328 user I/O support parallel ADC or DAC buses, clock distribution, trigger signals, and instrumentation interconnects. The -N3 performance class is useful where external-interface timing margin is limited, while the industrial temperature range supports laboratory and production equipment deployed in variable environments.
おすすめ
Networking and Packet Processing
The XC6SLX75-N3CSG484I supports networking modules that require concurrent packet handling, interface conversion, and buffering. Programmable logic can implement header parsing, filtering, traffic shaping, and protocol bridging, while block RAM can provide FIFO and packet-buffer resources. Its 328 user I/O allow direct connection to parallel PHY interfaces, management processors, and high-speed network backplanes. The -N3 grade is advantageous for designs with demanding clock rates or short timing margins, and the industrial temperature option supports gateways and network equipment installed outside controlled office conditions. Final I/O standards and maximum interface performance should be confirmed from the device documentation.
おすすめ
Communications Infrastructure
The XC6SLX75-N3CSG484I can be used in line cards, baseband modules, and communications equipment requiring parallel datapaths and tightly timed control. Its programmable architecture supports framing, synchronization, scrambling, error handling, and stream adaptation, while 3,170,304 RAM bits allow local buffering between pipeline stages. The 484-CSPBGA package supplies 328 user I/O for parallel buses, clocks, and serial transceiver connections. The industrial temperature range is useful in outdoor or industrial telecom installations, and the -N3 grade offers additional timing margin for high-throughput designs compared with the -2 option.
おすすめ
Video and Image Processing
The XC6SLX75-N3CSG484I is suitable for embedded video processing because parallel programmable logic can execute filtering, scaling, color conversion, and interface timing functions. The 74,637 logic elements provide substantial combinational and sequential capacity, while 3,170,304 RAM bits support line buffers, frame windows, and pixel queues. Its 328 user I/O can connect parallel cameras, display controllers, memory interfaces, and synchronization signals without using external glue logic. The -N3 timing grade can improve margin on wide data buses and clocked pipelines, and the industrial-temperature option supports imaging systems used in manufacturing, transportation, and surveillance equipment.
おすすめ
Aerospace and Defense Control
The XC6SLX75-N3CSG484I may serve as a programmable control or interface component in aerospace, defense, and ruggedized embedded systems where long product availability and deterministic logic are important. The 5,831 logic blocks can implement redundant control paths, command decoding, telemetry formatting, and fault monitoring, while 3,170,304 RAM bits provide configurable buffering. The -40°C to +100°C rating supports extended-temperature equipment, but AEC-Q100 qualification is not stated for this ordering code. Aerospace programs therefore require separate qualification, reliability, radiation, and procurement review before using the device as a flight-critical component.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC6SLX75-N3CSG484I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC6SLX75-3CSG484I | XC6SLX75-2CSG484I | XC6SLX75-L1CSG484I | XC6SLX75-2CSG484C | XC6SLX75T-N3CSG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA, 19 x 19 mm | 484-FBGA, CSPBGA | 484-FBGA, CSPBGA | 484-CSPBGA | 484-CSPBGA | 484-FBGA, CSPBGA |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LXT |
| Speed or Performance Designation | -N3 | -3 | -2 | -L1 | -2 | -N3 |
主な差別化要因
- Retains the complete 328-I/O interface when compared with the LXT alternative (vs XC6SLX75T-N3CSG484I)
- Higher timing-grade designation than the -2 package equivalent (vs XC6SLX75-2CSG484I)
- Industrial-temperature ordering option (vs XC6SLX75-2CSG484C)
- Substantial logic and memory capacity in a single CSG484 device (vs XC6SLX75-L1CSG484I)
設計ノート
Use the AMD Spartan-6 CSG484 package files as the authoritative source for the land pattern, ball names, and escape-routing geometry. A 484-ball BGA generally requires multilayer construction, short escape paths, uninterrupted reference planes, and a power-distribution network sized for the device's switching and configuration activity. Have the fabricator review pad definitions, mask slivers, paste release, and assembly process before releasing the board files.
Separate the FPGA's core, I/O, and auxiliary supply rails according to the manufacturer power-connection table, then verify each rail's voltage, tolerance, sequencing, and startup behavior. Place the required decoupling capacitors at their specified package pins and avoid sharing long supply paths between the 484-BGA and other high-current loads. Check configuration-pin states during power-up because incorrect states can place the Spartan-6 device into an unintended startup sequence.
Estimate worst-case junction temperature from total device dissipation, ambient temperature, board construction, and the thermal path from the BGA to the PCB. Estimated values must be recalculated for the final stack-up, copper distribution, airflow, and enclosure because package size alone does not determine thermal performance. Use the manufacturer's power data for the selected speed grade and design configuration, and preserve thermal-relief and via-array practices around the power balls.
Route clocks and high-speed interfaces with continuous reference planes and controlled impedance, and keep clock-distribution paths symmetrical where the FPGA architecture requires matched delay. Reserve the device's configuration, startup, and mode-control pins according to the datasheet rather than treating them as general-purpose user I/O. After layout, run signal-integrity and power-integrity simulations for the highest-speed interfaces and verify timing with the final speed-grade constraints.
コンプライアンス情報
The Spartan-6 LX documentation states that Pb and Pb-free packages are available, but the exact lead-free, RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status of XC6SLX75-N3CSG484I was not established.