XC6SLX75-N3CSG484I - Spartan-6 LX FPGA, 74,637 LE | AMD
Артикул: XC6SLX75-N3CSG484I ✓ АктивенXC6SLX75-N3CSG484I Обзор
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and peripherals can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, while its parallel architecture is well suited to parallel data processing, interface bridging, control logic, and signal acquisition. The Spartan-6 LX family combines configurable logic blocks, block RAM, DSP slices, and high-speed I/O in an integrated silicon platform.
Key resources include 5,831 logic blocks, 328 user I/O pins, and 3,170,304 total RAM bits. The -N3 grade targets designs requiring higher performance than lower Spartan-6 speed grades, while the industrial temperature rating permits deployment across industrial and extended commercial environments. The 484-CSPBGA package provides dense external connectivity but requires careful escape routing, multilayer PCB construction, and adequate thermal management.
The device supports programmable logic and memory resources for designs requiring parallel throughput, deterministic interfaces, and configurable I/O standards. Its block RAM can support packet buffering, data acquisition, waveform storage, and general-purpose data processing. The DSP resources can accelerate multiply-accumulate operations, while the large I/O count supports memory interfaces, parallel buses, high-speed serial links, and external peripheral connections.
Typical uses include industrial control, test and measurement, networking equipment, video processing, communications infrastructure, embedded systems, and high-speed signal-processing modules. The 484-ball package is especially appropriate for designs that need substantially more I/O and memory capacity than a small FPGA or CPLD while retaining a single-package implementation.
PCB design should follow the AMD Spartan-6 package and pinout files, using the exact ball assignments for power, ground, configuration, clock, and user I/O. A multilayer board with short ground references, controlled impedance routing, and a dedicated power-distribution network is appropriate for this high-pin-count BGA. Configuration storage and startup behavior must also be checked against the device's supported configuration modes.
This page combines the exact device identity, package information, logic and memory resources, temperature range, drop-in family alternatives, comparison parameters, and implementation guidance. It is intended to help engineers identify whether the XC6SLX75-N3CSG484I fits a new design or an existing Spartan-6 LX board revision.
Аналоги без доработки для XC6SLX75-N3CSG484I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с XC6SLX75-N3CSG484I (тот же форм-фактор и посадочное место) — отличается по Package Type, Speed Grade, Mounting Type, Adaptive Logic Modules, Device Type.
XC6SLX75-3CSG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX75-2CSG484I
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX75-L1CSG484I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC6SLX75-2CSG484C
✅ Прямая заменаУточнить цену
Открыть даташит →XC6SLX75T-N3CSG484I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
XC6SLX75-N3CSG484I Максимальные параметры и электрические характеристики
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Spartan-6 LX |
| Logic Elements | 74,637 |
| Logic Blocks | 5,831 |
| Total RAM Bits | 3,170,304 bits |
| User I/O Pins | 328 |
| Package Type | 484-CSPBGA |
| Package Dimensions | 19 x 19 mm |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40°C to +100°C |
| Speed Grade | -N3 |
| Temperature Grade | Industrial |
| Device Type Code | 3170304 |
| Manufacturer Product Number | 74637 |
Руководство по цоколевке XC6SLX75-N3CSG484I в корпусе 19 x 19 mm
Цоколевка для XC6SLX75-N3CSG484I (корпус 19 x 19 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для XC6SLX75-N3CSG484I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
XC6SLX75-N3CSG484I подходит для 6 применениеs: Industrial Control Systems, Test and Measurement Instruments, Networking and Packet Processing, Communications Infrastructure, Video and Image Processing, Aerospace and Defense Control.
Industrial Control Systems
The XC6SLX75-N3CSG484I fits industrial controllers that need deterministic parallel processing, extensive I/O, and extended-temperature operation. Its 74,637 logic elements and 5,831 logic blocks can host sequencing logic, machine-state control, diagnostics, and communication protocols, while 3,170,304 RAM bits support local buffers and trace records. The -40°C to +100°C industrial range suits equipment operating beyond ordinary commercial-temperature limits. With 328 user I/O in the 484-CSPBGA package, the device can connect sensors, actuators, encoders, field buses, and service interfaces without splitting control functions across multiple devices.
Рекомендуется
Test and Measurement Instruments
The XC6SLX75-N3CSG484I is appropriate for acquisition and control instruments requiring parallel sampling logic, configurable test interfaces, and local data storage. The 5,831 logic blocks can implement control sequencing, protocol engines, and digital filtering, while the device's 3,170,304 RAM bits can be partitioned into acquisition buffers and communication FIFOs. Its 328 user I/O support parallel ADC or DAC buses, clock distribution, trigger signals, and instrumentation interconnects. The -N3 performance class is useful where external-interface timing margin is limited, while the industrial temperature range supports laboratory and production equipment deployed in variable environments.
Рекомендуется
Networking and Packet Processing
The XC6SLX75-N3CSG484I supports networking modules that require concurrent packet handling, interface conversion, and buffering. Programmable logic can implement header parsing, filtering, traffic shaping, and protocol bridging, while block RAM can provide FIFO and packet-buffer resources. Its 328 user I/O allow direct connection to parallel PHY interfaces, management processors, and high-speed network backplanes. The -N3 grade is advantageous for designs with demanding clock rates or short timing margins, and the industrial temperature option supports gateways and network equipment installed outside controlled office conditions. Final I/O standards and maximum interface performance should be confirmed from the device documentation.
Рекомендуется
Communications Infrastructure
The XC6SLX75-N3CSG484I can be used in line cards, baseband modules, and communications equipment requiring parallel datapaths and tightly timed control. Its programmable architecture supports framing, synchronization, scrambling, error handling, and stream adaptation, while 3,170,304 RAM bits allow local buffering between pipeline stages. The 484-CSPBGA package supplies 328 user I/O for parallel buses, clocks, and serial transceiver connections. The industrial temperature range is useful in outdoor or industrial telecom installations, and the -N3 grade offers additional timing margin for high-throughput designs compared with the -2 option.
Рекомендуется
Video and Image Processing
The XC6SLX75-N3CSG484I is suitable for embedded video processing because parallel programmable logic can execute filtering, scaling, color conversion, and interface timing functions. The 74,637 logic elements provide substantial combinational and sequential capacity, while 3,170,304 RAM bits support line buffers, frame windows, and pixel queues. Its 328 user I/O can connect parallel cameras, display controllers, memory interfaces, and synchronization signals without using external glue logic. The -N3 timing grade can improve margin on wide data buses and clocked pipelines, and the industrial-temperature option supports imaging systems used in manufacturing, transportation, and surveillance equipment.
Рекомендуется
Aerospace and Defense Control
The XC6SLX75-N3CSG484I may serve as a programmable control or interface component in aerospace, defense, and ruggedized embedded systems where long product availability and deterministic logic are important. The 5,831 logic blocks can implement redundant control paths, command decoding, telemetry formatting, and fault monitoring, while 3,170,304 RAM bits provide configurable buffering. The -40°C to +100°C rating supports extended-temperature equipment, but AEC-Q100 qualification is not stated for this ordering code. Aerospace programs therefore require separate qualification, reliability, radiation, and procurement review before using the device as a flight-critical component.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для XC6SLX75-N3CSG484I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | XC6SLX75-3CSG484I | XC6SLX75-2CSG484I | XC6SLX75-L1CSG484I | XC6SLX75-2CSG484C | XC6SLX75T-N3CSG484I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 484-CSPBGA, 19 x 19 mm | 484-FBGA, CSPBGA | 484-FBGA, CSPBGA | 484-CSPBGA | 484-CSPBGA | 484-FBGA, CSPBGA |
| FPGA Family | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LX | Spartan-6 LXT |
| Speed or Performance Designation | -N3 | -3 | -2 | -L1 | -2 | -N3 |
Ключевые отличия
- Retains the complete 328-I/O interface when compared with the LXT alternative (против XC6SLX75T-N3CSG484I)
- Higher timing-grade designation than the -2 package equivalent (против XC6SLX75-2CSG484I)
- Industrial-temperature ordering option (против XC6SLX75-2CSG484C)
- Substantial logic and memory capacity in a single CSG484 device (против XC6SLX75-L1CSG484I)
Заметки по проектированию
Use the AMD Spartan-6 CSG484 package files as the authoritative source for the land pattern, ball names, and escape-routing geometry. A 484-ball BGA generally requires multilayer construction, short escape paths, uninterrupted reference planes, and a power-distribution network sized for the device's switching and configuration activity. Have the fabricator review pad definitions, mask slivers, paste release, and assembly process before releasing the board files.
Separate the FPGA's core, I/O, and auxiliary supply rails according to the manufacturer power-connection table, then verify each rail's voltage, tolerance, sequencing, and startup behavior. Place the required decoupling capacitors at their specified package pins and avoid sharing long supply paths between the 484-BGA and other high-current loads. Check configuration-pin states during power-up because incorrect states can place the Spartan-6 device into an unintended startup sequence.
Estimate worst-case junction temperature from total device dissipation, ambient temperature, board construction, and the thermal path from the BGA to the PCB. Estimated values must be recalculated for the final stack-up, copper distribution, airflow, and enclosure because package size alone does not determine thermal performance. Use the manufacturer's power data for the selected speed grade and design configuration, and preserve thermal-relief and via-array practices around the power balls.
Route clocks and high-speed interfaces with continuous reference planes and controlled impedance, and keep clock-distribution paths symmetrical where the FPGA architecture requires matched delay. Reserve the device's configuration, startup, and mode-control pins according to the datasheet rather than treating them as general-purpose user I/O. After layout, run signal-integrity and power-integrity simulations for the highest-speed interfaces and verify timing with the final speed-grade constraints.
Информация о соответствии
The Spartan-6 LX documentation states that Pb and Pb-free packages are available, but the exact lead-free, RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status of XC6SLX75-N3CSG484I was not established.