XC7A50T-1FGG484I - 52,160 Logic Cell Artix-7 FPGA | AMD
部品番号: XC7A50T-1FGG484I ✓ 生産中XC7A50T-1FGG484I 概要
A field-programmable gate array is a semiconductor whose logic, interconnect, and configurable I/O blocks are programmed after manufacture. The XC7A50T belongs to the Artix-7 FPGA family, combining programmable logic, DSP resources, block RAM, programmable I/O, and high-speed serial transceivers in one device. Its position in the hierarchy is FPGA → Artix-7 FPGA → 7-Series FPGA → programmable semiconductor.
The principal features of the XC7A50T-1FGG484I include 52,160 logic cells, 250 user I/Os, and four GTP transceivers. The -1 ordering code identifies the device’s speed grade, while the FGG484 designation identifies the 484-ball package family. Its 250 I/Os provide extensive connectivity for parallel buses, control signals, industrial interfaces, and external memory. Four GTP transceivers extend the design capability into applications requiring high-speed serial links.
The device also provides 134,600 bits of block RAM and 215 DSP slices, allowing parallel logic, DSP processing, and buffered storage to share one implementation platform. These resources make the FPGA useful for real-time control, signal acquisition, sensor processing, industrial automation, communications, and embedded video functions. A 100 MHz configuration clock is specified for the target device, supporting common parallel configuration architectures.
Typical applications include industrial PLC and factory-control logic, sensor-fusion and real-time acquisition systems, camera and image-processing pipelines, low-cost serial-interface bridges, and embedded communications equipment. In each case, designers use the Artix-7 balance of programmable logic resources, I/O density, DSP capability, and four GTP transceivers to consolidate functions that would otherwise require several discrete devices.
PCB implementation requires careful attention to the 484-ball fine-pitch BGA escape routing, power delivery, decoupling, and high-speed transceiver layout. Consult the manufacturer’s Artix-7 package pinout files and package-specific PCB guidance when assigning balls and planning layer transitions. Configuration storage, clocking, decoupling, and unused-pin treatment must be implemented according to the device documentation.
This product page combines the exact device identity, architecture-level parameters, same-package migration options, pricing context, and engineering design guidance to support faster FPGA selection and PCB planning. It also distinguishes speed-grade, temperature-grade, and density changes that can be important when determining replacement suitability.
ドロップイン代替品: XC7A50T-1FGG484I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7A50T-1FGG484I (同一形状・フットプリント) — 相違点: Package, Block RAM, Logic Cells, Device Type, Mounting Type.
XC7A50T-2FGG484I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A50T-L1FGG484I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7A50T-1FGG484C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7A50T-1FG484I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A35T-1FGG484I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A100T-1FGG484I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7A50T-1FGG484I 最大定格&電気的特性
| Device Type | Artix-7 Field Programmable Gate Array |
| Logic Cells | 52,160 cells |
| User I/O | 250 I/Os |
| GTP Transceivers | 4 transceivers |
| DSP Slices | 215 slices |
| Block RAM | 134,600 bits |
| Speed Grade | -1 |
| Junction Temperature Range | -40 °C to +100 °C |
| パッケージ | 484-ball fine-pitch BGA, 23 mm × 23 mm |
| Package Family | FGG484 |
| Configuration Clock | 100 MHz |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
| REACH Status | Compliant |
| DRC Status | Conflict Free |
| ライフサイクル状態 | Active |
XC7A50T-1FGG484I fgg484 ピン配置ガイド
XC7A50T-1FGG484I (fgg484 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7A50T-1FGG484I.
詳細は データシート をご参照ください。
主な用途
XC7A50T-1FGG484I の用途: 6 件s: Industrial PLC and Automation Control, Real-Time Sensor Fusion, Industrial Image Processing, High-Speed Serial Interface Bridge, Motor Control and Power Conversion, Embedded Communication Equipment.
Industrial PLC and Automation Control
The XC7A50T-1FGG484I fits industrial PLC and automation-control logic because it combines 52,160 programmable logic cells with 250 user I/Os in one 484-ball device. The I/O capacity supports parallel digital modules, encoders, interlocks, machine buses, and control outputs without requiring a companion microcontroller for every deterministic function. Its industrial -40 °C to +100 °C junction-temperature range supports factory-floor equipment where internal temperatures exceed consumer-grade limits. Four GTP transceivers can also support point-to-point industrial links when the design includes them.
おすすめ
Real-Time Sensor Fusion
The XC7A50T-1FGG484I is suitable for real-time sensor-fusion systems that combine multiple input streams and perform filtering in programmable logic. Its 215 DSP slices can accelerate multiply-accumulate operations, while 134,600 bits of block RAM support parallel buffers and working storage. The 250 user I/Os provide flexible interfaces to ADCs, digital sensors, and digital cameras. Engineers can implement fixed-point pipelines, cross-correlation, and feature extraction in parallel, reducing reliance on a separate processor for deterministic datapaths.
おすすめ
Industrial Image Processing
The XC7A50T-1FGG484I supports industrial image-processing and machine-vision designs by combining programmable logic, 215 DSP slices, and flexible I/O in a single FGG484 package. Parallel pixel pipelines can perform color conversion, thresholding, filtering, and region-of-interest extraction while external video decoders deliver compressed or serialized camera data. The four GTP transceivers provide additional serial-link resources, although image timing, video standards, and transceiver clocking must be designed according to the selected camera interface and AMD transceiver guidance.
おすすめ
High-Speed Serial Interface Bridge
The XC7A50T-1FGG484I can consolidate legacy parallel interfaces and high-speed serial links because it offers 250 user I/Os and four GTP transceivers in one device. A designer can implement protocol conversion, framing, clock-domain isolation, and data packing in programmable logic while using the GTP channels for serial links. The -1 speed grade affects timing margin, so the design should be constrained and verified against the selected I/O standard, reference clock, cable, connector, and signal-integrity environment before production release.
おすすめ
Motor Control and Power Conversion
The XC7A50T-1FGG484I is appropriate for sophisticated motor-control and power-conversion front ends where deterministic timing, parallel control I/O, and DSP processing must coexist. Its 215 DSP slices can implement fixed-point control calculations, while the 250 user I/Os connect gate drivers, position sensors, current-sense amplifiers, and protection signals. Four GTP transceivers support communications or isolation boundaries in higher-complexity systems. Power-stage design still requires separate gate drivers, current sensors, protection circuitry, and careful separation between high-current and sensitive control paths.
おすすめ
Embedded Communication Equipment
The XC7A50T-1FGG484I suits embedded communication equipment requiring protocol termination, packet processing, and flexible external interfaces. Programmable logic can implement framing, routing tables, rate adaptation, and low-latency packet filtering, while 134,600 bits of block RAM provide storage for queues and descriptors. The four GTP transceivers support high-speed serial connectivity, and the 250 user I/Os accommodate slower management, status, and configuration interfaces. The -1 speed grade and FGG484 thermal design should be checked against worst-case clocking, traffic, and ambient-temperature conditions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7A50T-1FGG484I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7A50T-2FGG484I | XC7A50T-L1FGG484I | XC7A50T-1FGG484C | XC7A50T-1FG484I | XC7A35T-1FGG484I | XC7A100T-1FGG484I |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FGG484, 484-ball fine-pitch BGA, 23 mm × 23 mm | FGG484 | FGG484 | FGG484 | FG484 | FGG484 | FGG484 |
| Device Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Speed Grade | -1 | -2 | -1L | -1 | -1 | -1 | -1 |
| Temperature Qualification | Industrial, -40 °C to +100 °C junction temperature | Industrial | Industrial | Commercial | Industrial | Industrial | Industrial |
主な差別化要因
- Provides the standard -1 speed grade with industrial-temperature coverage (vs XC7A50T-1FGG484C)
- Avoids the timing tradeoff of the faster -2 grade (vs XC7A50T-2FGG484I)
- Retains the standard -1 performance family while offering a low-power migration path (vs XC7A50T-L1FGG484I)
- Combines 52,160 logic cells with 250 user I/Os in the 484-ball package (vs XC7A35T-1FGG484I)
設計ノート
Use the FGG484-specific AMD package file as the authority for every ball assignment before schematic capture is released. Route the 484-ball fine-pitch BGA with a verified escape strategy, maintain continuous power and ground planes, and follow the package-specific via and decoupling recommendations. Because NC assignments can differ between Artix-7 densities, do not copy a ball map from an XC7A35T or XC7A100T design without checking the selected device.
Treat the four GTP links as controlled-impedance differential interfaces with continuous reference planes and manufacturer-recommended ball and via transitions. Keep configuration and parallel I/O routing away from sensitive transceiver receive paths where practical, and follow AMD’s clocking, package-routing, and signal-integrity guidance for the selected FGG484 variant. Validate the complete channel with representative connectors, cables, retimers or receivers, and the intended clock source.
Build the power tree for the device’s core and auxiliary rails using the manufacturer’s recommended topology, decoupling values, and sequencing requirements. Keep high-current switching paths and converter loops away from configuration and sensitive transceiver inputs. After implementation, measure rail startup, ripple, and sequencing on hardware because a static schematic review cannot verify power-supply interaction with the FGG484 package.
Do not treat XC7A50T-2FGG484I, XC7A50T-L1FGG484I, XC7A50T-1FGG484C, XC7A50T-1FG484I, XC7A35T-1FGG484I, and XC7A100T-1FGG484I as unconditional substitutions. Speed grade changes alter timing and power, temperature suffixes alter operating limits, package designators may denote different assignments, and density changes can remove or alter resources. Re-run synthesis, place-and-route, timing analysis, bitstream generation, and board-level validation for every proposed migration.
コンプライアンス情報
EU RoHS compliance, REACH compliance, and DRC conflict-free status are identified for the target device. AEC-Q100 is not applicable based on the industrial ordering option, while exact lead-free and halogen-free declarations remain unknown.