XC7Z010-2CLG400E - Dual-Core Zynq SoC, 766MHz | AMD
部品番号: XC7Z010-2CLG400E ✓ 生産中XC7Z010-2CLG400E 概要
A Zynq system-on-chip belongs to the FPGA & CPLD category and integrates a hard processor system with programmable logic. Unlike a separate microcontroller and FPGA, this architecture allows software and hardware functions to exchange data through dedicated interfaces without requiring an external processor-to-FPGA bus. The XC7Z010 also includes 130 I/O, making it appropriate for embedded control, data acquisition, communications, and industrial equipment requiring both firmware execution and hardware timing.
The key features of the XC7Z010-2CLG400E are its 766 MHz dual-core ARM Cortex-A9 processor, 28,000 programmable logic cells, CoreSight debug support, and integration in the 400-CSPBGA package. The processor operates from 1.2 V and 3.3 V according to the component listing, while the snippet identifies the device as a Zynq-7000 SoC with Artix-7 FPGA resources. These characteristics support deterministic hardware functions operating alongside a conventional embedded-software stack.
The device architecture combines an ARM MPCore processing subsystem with Artix-7 programmable logic. Firmware can control processors, peripherals, memory, and external interfaces, while programmable logic can implement parallel data paths, protocol handling, filters, or accelerator functions. The integrated SoC arrangement reduces component count and board complexity, but the system still requires careful partitioning between hard-processor peripherals and fabric logic to avoid inefficient arbitration or timing bottlenecks.
Typical applications include industrial control gateways, camera and image-processing modules, networked embedded systems, sensor acquisition equipment, and communications infrastructure. A camera module can place pixel formatting or interface logic in the FPGA fabric while the ARM cores manage control protocols. An industrial gateway can run operating-system software while programmable logic accelerates packet handling or deterministic data acquisition.
The 400-CSPBGA package requires careful PCB layout, power-plane planning, via assignment, and thermal design. Use the AMD package pinout files and UG865 when assigning every ball, and follow the Zynq-7000 power, decoupling, and configuration requirements in the manufacturer documentation. Differential pairs and high-speed memory or interface routes need controlled length, return paths, and reference-plane continuity.
This product page combines the device identity, package information, family alternatives, application guidance, comparison parameters, and practical design considerations into one engineering reference for evaluating the XC7Z010-2CLG400E.
ドロップイン代替品: XC7Z010-2CLG400E — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7Z010-2CLG400E (同一形状・フットプリント) — 相違点: Processor Core, Package, Package Dimensions, Processor Frequency, Product Type.
XC7Z010-2CLG400I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z010-1CLG400C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z010-L1CLG400I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7Z007S-1CLG400
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7Z010-2CLG400E 最大定格&電気的特性
| Device Type | Zynq-7000 SoC with Artix-7 programmable logic |
| Processor Core | Dual-core ARM Cortex-A9 MPCore |
| Processor Frequency | 766 MHz |
| Programmable Logic Cells | 28,000 cells |
| Debug Support | CoreSight |
| Input/Output Count | 130 I/O |
| Package Type | 400-CSPBGA |
| Package Dimensions | 17 x 17 mm |
| Package Pin Count | 400 pins |
| Processor Supply Voltage | 1.2 V |
| I/O Supply Voltage | 3.3 V |
| Memory Capacity | 256 KB |
| Programmable Logic Architecture | Artix-7 FPGA |
| System Architecture | Integrated ARM processor system and FPGA fabric |
| 実装タイプ | Surface mount |
| RoHS ステータス | RoHS |
XC7Z010-2CLG400E 400 pins ピン配置ガイド
XC7Z010-2CLG400E (400 pins パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7Z010-2CLG400E.
詳細は データシート をご参照ください。
主な用途
XC7Z010-2CLG400E の用途: 6 件s: Industrial Control Gateway, Camera and Image Processing, Sensor Acquisition System, Network Communications Equipment, Programmable Logic Test Platform, Secure Embedded Appliance.
Industrial Control Gateway
The XC7Z010-2CLG400E fits an industrial gateway because its 766 MHz dual-core ARM Cortex-A9 processor can run communications, control, and field-bus software while the 28,000 Artix-7 logic cells provide parallel hardware assistance. A designer can place packet filtering, protocol conversion, or deterministic timing functions in programmable logic and reserve the processor for operating-system services. The 130 I/O support peripheral connections in the 400-CSPBGA package. Power planning should account for the listed 1.2 V processor and 3.3 V I/O rails, while the PCB must preserve controlled return paths for high-speed interfaces and provide suitable thermal distribution beneath the BGA.
おすすめ
Camera and Image Processing
The XC7Z010-2CLG400E is suitable for camera modules that divide work between sequential software and parallel pixel processing. Its dual-core 766 MHz ARM Cortex-A9 subsystem can manage exposure control, configuration, networking, and application logic, while the Artix-7 fabric can implement pixel formatting, thresholding, or interface timing. The device offers 28,000 logic cells and 130 I/O for connecting image sensors and supporting circuitry. The primary engineering trade-off is routing complexity: the 400-CSPBGA footprint requires careful ball-escape planning, and any high-speed sensor interface must use the AMD package files to maintain lane and reference-plane integrity.
おすすめ
Sensor Acquisition System
The XC7Z010-2CLG400E supports sensor-acquisition equipment that benefits from deterministic parallel sampling and embedded processing. Programmable logic can implement acquisition timing, counters, filtering, or data preparation, while the 766 MHz dual-core ARM processor performs calibration, buffering, diagnostics, and communications. With 130 I/O, the device can connect multiple sensors and digital interfaces without requiring a separate FPGA. Designers should allocate fabric or hard-peripheral resources according to the AMD Zynq-7000 architecture, and should review the device pinout files for every BGA ball. The final implementation must also validate acquisition latency, I/O voltage, power sequencing, and thermal behavior under the intended environmental conditions.
おすすめ
Network Communications Equipment
The XC7Z010-2CLG400E is appropriate for embedded network appliances that combine protocol software with hardware-assisted traffic handling. The ARM Cortex-A9 cores can manage a network stack, configuration, and control processes, while programmable logic can accelerate framing, filtering, serialization, or custom interface functions. Its 28,000 logic cells provide capacity for parallel datapaths, and 130 I/O allow connection to transceivers and control logic. Engineers should avoid unnecessary fabric contention between the processor subsystem and programmable logic, and should use constrained Vivado timing checks to verify interface margins. Board routing must accommodate the 400-CSPBGA footprint, the listed 1.2 V and 3.3 V supplies, and continuous reference planes under high-speed escapes.
おすすめ
Programmable Logic Test Platform
The XC7Z010-2CLG400E can serve as a compact development and test platform for processor-assisted FPGA logic. The 766 MHz ARM subsystem executes test algorithms and controls procedures, while the 28,000 Artix-7 logic cells allow researchers to prototype custom datapaths, interfaces, or accelerators. CoreSight support assists debug workflows, while 130 I/O provides access to board-level test and communication resources. Because the device uses a 400-CSPBGA package, the platform must provide careful escape routing, decoupling, power delivery, and thermal management. Engineers should also select the correct Vivado target part and repeat timing analysis whenever they migrate between -2, -1, or other ordering-grade variants.
おすすめ
Secure Embedded Appliance
The XC7Z010-2CLG400E fits embedded appliances where an operating-system-capable processor and programmable hardware must coexist in a compact assembly. The dual-core ARM Cortex-A9 implementation supports concurrent control and communication tasks, while Artix-7 logic can implement protocol offload, hardware checks, or dedicated data paths. Its 130 I/O supports external memory, network, storage, and control connectivity. Security implementations should use AMD-supported configuration, debug, and boot mechanisms rather than assuming that all device features are available in every ordering code. Layout must preserve isolation between sensitive interfaces and noisy programmable-logic routes, and the completed assembly should be tested for power sequencing, electromagnetic behavior, junction temperature, and recovery after configuration events.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7Z010-2CLG400E — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7Z010-2CLG400I | XC7Z010-1CLG400I | XC7Z010-1CLG400C | XC7Z010-L1CLG400I | XC7Z007S-1CLG400 |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA, 17 x 17 mm | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Speed Grade | -2 | -2 | -1 | -1 | -L1 | -1 |
主な差別化要因
- Higher listed processor frequency (vs XC7Z010-1CLG400C)
- Retains the full-size XC7Z010 device family (vs XC7Z007S-1CLG400)
- Higher speed grade within the same AMD ordering family (vs XC7Z010-1CLG400I)
- Performance-oriented ordering grade (vs XC7Z010-L1CLG400I)
設計ノート
Use the official CLG400 package pinout files when assigning all 400 BGA balls and when creating the PCB footprint. Keep the pin 1 orientation and ball map synchronized with the exact ordering code and package revision. For 17 x 17 mm escape routing, evaluate layer transitions and via-in-pad or microvia requirements with the PCB fabricator. Do not derive the footprint from a generic 400-BGA symbol because small differences in ball pitch, pad definition, or component orientation can prevent reliable assembly.
Plan separate distribution for the listed 1.2 V processor and 3.3 V I/O supplies, and follow the AMD Zynq-7000 power-sequence requirements. Place required decoupling capacitance at the closest legal supply and ground balls, with short, low-impedance connections between the capacitor pads and package. Validate voltage tolerances, inrush, sequencing, and power-source impedance in simulation and measurement because the two rails support different parts of the SoC.
The 400-CSPBGA package has 17 x 17 mm dimensions, so thermal performance depends heavily on the PCB copper area, via distribution, enclosure airflow, and adjacent heat sources. Model the full power budget and junction-temperature rise with the selected board stack-up rather than relying on a generic package figure. Spread thermal vias beneath the device where permitted by the mechanical design, maintain uninterrupted ground references, and verify temperatures during worst-case processor, logic, and I/O activity.
Use the AMD package files and Zynq-7000 design guidance to identify high-speed ball groups and preserve continuous reference planes beneath escape routes. Match interface topology and length according to the selected peripheral standard, and keep switching fabric and processor interfaces separated where practical. Run post-route timing and signal-integrity checks in Vivado, then validate power sequencing and worst-case I/O activity on hardware because static schematic connectivity alone cannot confirm the 400-ball implementation.
コンプライアンス情報
The LCSC product listing identifies the exact MPN as RoHS. RoHS and REACH apply at product and material levels, while automotive qualification is not inferred from the ordering code.