XC7Z012S-1CLG485I - 667MHz Zynq SoC | AMD
部品番号: XC7Z012S-1CLG485I ✓ 生産中XC7Z012S-1CLG485I 概要
A system-on-chip is an integrated semiconductor that combines a processing system and programmable logic in one package. Within the Zynq-7000 hierarchy, the device belongs to the Zynq-7000S family and combines the Arm Cortex-A9 processor with Artix-7 FPGA fabric. This integration can simplify data movement between software-controlled processing and parallel hardware logic while reducing board-level component count and interconnect complexity.
The principal device characteristics include one Arm Cortex-A9 processor core operating at 667 MHz, 55,000 FPGA logic cells, and CoreSight debug support. The CLG485 designation identifies a 485-ball chip-scale BGA package. Compared with the related XC7Z012S-2CLG485I, the -1 speed grade operates at 667 MHz rather than 766 MHz, making it appropriate where the lower speed grade meets system timing and power requirements.
The device architecture divides work between the processor and programmable logic. The processor executes operating-system software, control code, and network-facing applications, while the FPGA fabric implements parallel data paths, custom peripherals, protocol engines, and time-critical processing. Pin multiplexing and device configuration are established through AMD programming tools and the associated Zynq-7000 design documentation.
Typical uses include industrial control gateways, machine-vision systems, embedded network appliances, test and measurement instruments, and data-acquisition platforms. The processor is suited to supervisory software and control functions, while the Artix-7 logic can accelerate parallel algorithms or implement hardware interfaces that would otherwise burden the processor.
PCB implementation requires careful attention to the dense BGA escape routing, power delivery, decoupling, and signal-integrity requirements. The board must follow the AMD package placement, pinout, and high-density design guidance, including differential-pair geometry, reference-plane continuity, and thermal management around the device. Firmware, HDL, and constraint files must be validated for the exact device speed and package variant.
This page combines the device architecture, verified ordering information, package-aware alternatives, comparison parameters, and practical design guidance for engineers evaluating the XC7Z012S-1CLG485I as the processing and programmable-logic centerpiece of an embedded system.
ドロップイン代替品: XC7Z012S-1CLG485I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7Z012S-1CLG485I (同一形状・フットプリント) — 相違点: Operating Temperature Range, Processor Core, Mounting Type, Device Type, Package.
XC7Z012S-2CLG485I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z012S-1CLG485C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z012S-2CLG485E
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z012S-1CLG485E
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7Z012S-2CLG485C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC7Z012S-1CLG485I 最大定格&電気的特性
| Device Type | Zynq-7000S system-on-chip |
| Processor Core | 1 Arm Cortex-A9 core |
| Processor Clock Frequency | 667 MHz |
| FPGA Logic Cells | 55,000 cells |
| FPGA Family | Artix-7 |
| Programmable Logic Process Technology | 28 nm |
| パッケージ | 485-CSPBGA, 19 mm x 19 mm |
| Package Ball Count | 485 balls |
| Debug Support | CoreSight |
| 動作温度範囲 | -40°C to +100°C |
| Speed Grade | -1 grade |
| Temperature Grade | Industrial grade |
| 実装タイプ | Surface-mount chip-scale BGA |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| Lead-Free Status | unknown |
| Automotive AEC-Q100 Qualification | Not applicable |
XC7Z012S-1CLG485I 485 balls ピン配置ガイド
XC7Z012S-1CLG485I (485 balls パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7Z012S-1CLG485I.
詳細は データシート をご参照ください。
主な用途
XC7Z012S-1CLG485I の用途: 6 件s: Industrial Control Gateway, Machine Vision Processing, Embedded Network Appliance, Data Acquisition System, Test and Measurement Instrument, Programmable Sensor Hub.
Industrial Control Gateway
The XC7Z012S-1CLG485I fits an industrial gateway because its 667 MHz Cortex-A9 core can run control software, communications services, and device management while the 55,000-cell Artix-7 fabric handles protocol conversion and time-critical I/O. The processor and programmable logic communicate within one SoC, reducing external bus traffic and board complexity. Its industrial temperature designation supports equipment operating from -40°C to +100°C. During implementation, reserve FPGA logic for deterministic acquisition or filtering tasks and leave supervisory networking functions to the processor. Validate clocking, isolated interfaces, and thermal performance within the finished enclosure rather than relying only on laboratory conditions.
おすすめ
Machine Vision Processing
The XC7Z012S-1CLG485I is suitable for machine-vision preprocessing because the Artix-7 logic fabric can implement parallel pixel pipelines, thresholding, filtering, and data reduction at high throughput. The 667 MHz Cortex-A9 core can then perform higher-level recognition, classification, and system communication. Placing these functions in one device minimizes transfers of large image buffers across an external interface. Designers should define the image interface timing in HDL constraints, provide adequate board-level memory bandwidth, and isolate performance-critical paths from processor access. The exact sensor, display, and network interface requirements should be evaluated with representative image rates because the available I/O and memory performance vary by system configuration.
おすすめ
Embedded Network Appliance
The XC7Z012S-1CLG485I can serve as the central processor in an embedded network appliance because the Cortex-A9 core supports operating-system software while the programmable fabric accelerates packet handling, encryption, compression, or interface functions. This division lets designers place deterministic data-path logic beside the application processor and reduce reliance on external accelerators. The 55,000 logic cells make the device especially appropriate for moderate parallel workloads rather than exceptionally large fabric designs. Firmware developers should establish a clear boundary between Linux-managed functions and hardware-assisted services. PCB validation must include controlled-impedance network routing, adequate power decoupling, and careful isolation between sensitive communication lines and high-speed programmable-logic interfaces.
おすすめ
Data Acquisition System
The XC7Z012S-1CLG485I supports data-acquisition systems where deterministic sampling interfaces must operate alongside higher-level acquisition software. The Artix-7 fabric can implement counters, capture buffers, trigger logic, and digital filtering, while the Cortex-A9 core handles configuration, storage, and reporting. This arrangement reduces the processing burden on a general-purpose processor and avoids sending every raw sample across an external bus. Engineers should define acquisition latency in HDL constraints, synchronize triggers across clock domains, and use the AMD package pinout files when assigning banks and dedicated clock pins. Storage bandwidth and the final sampling rate must be evaluated together because the processor, fabric, and external memory operate as one coordinated data path.
おすすめ
Test and Measurement Instrument
The XC7Z012S-1CLG485I is appropriate for modular test and measurement equipment that combines Linux-based control with deterministic FPGA instrumentation. The processor can manage calibration, storage, user interfaces, and instrument control, while the programmable logic implements counters, pattern generators, digital capture, or fast signal conditioning. This separation supports a product architecture that evolves as test requirements change without replacing the processor subsystem. For laboratory and production equipment, route high-accuracy timing signals to appropriate clock resources, isolate analog measurement circuitry from digital switching nodes, and verify input thresholds under worst-case loading. The CLG485 package and its 485 balls require a multilayer PCB with a deliberate escape-routing strategy.
おすすめ
Programmable Sensor Hub
The XC7Z012S-1CLG485I can consolidate sensing, conditioning, and communication in a programmable sensor hub. The Artix-7 logic fabric can execute parallel sampling, filtering, threshold detection, and sensor fusion stages, while the Cortex-A9 core handles configuration, diagnostics, and upstream communications. Moving repetitive sensor processing into programmable logic can reduce latency and improve timing determinism. The design should account for sensor clocking, calibration storage, fault handling, and watchdog recovery before assigning these functions to hardware or software. Because the SoC operates from a dense BGA package, use the official AMD placement diagram, provide uninterrupted power and ground planes, and validate signal integrity at every transition from the sensor interface into the programmable fabric.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7Z012S-1CLG485I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7Z012S-2CLG485I | XC7Z012S-1CLG485C | XC7Z012S-2CLG485E | XC7Z012S-1CLG485E | XC7Z012S-2CLG485C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) | 485-CSPBGA (19x19) |
| Processor Clock | 667 MHz | 766 MHz | 667 MHz | 766 MHz | 667 MHz | 766 MHz |
| Processor Core Count | 1 Arm Cortex-A9 core | 1 Arm Cortex-A9 core | 1 Arm Cortex-A9 core | 1 Arm Cortex-A9 core | 1 Arm Cortex-A9 core | 1 Arm Cortex-A9 core |
| FPGA Logic Cells | 55,000 cells | 55,000 cells | 55,000 cells | 55,000 cells | 55,000 cells | 55,000 cells |
| FPGA Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Speed Grade | -1 | -2 | -1 | -2 | -1 | -2 |
| Temperature Suffix | I | I | C | E | E | C |
| Programmable Logic Process | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
主な差別化要因
- Lower-clock grade matches designs that do not require the -2 performance level (vs XC7Z012S-2CLG485I)
- Industrial temperature designation supports wider deployment environments (vs XC7Z012S-1CLG485C)
- Single-core configuration reduces resource demand for embedded control tasks (vs XC7Z015-1CLG485I)
設計ノート
Design the PCB escape routing from the official AMD CLG485 package placement diagram and pinout files. A 485-ball CSPBGA requires a deliberate fanout using microvias, buried vias, or another controlled interconnect structure. Assign power and ground balls before signal routing, preserve short return paths beneath high-speed interfaces, and avoid long stubs between the package and decoupling components. Have the stack-up and via geometry reviewed against the actual layer-transition requirements before fabrication.
Partition power delivery according to the AMD power-supply requirements for the processor and programmable-logic sections. Place local bulk and high-frequency decoupling capacitors close to their assigned package balls, then confirm that each rail reaches its required sequencing state before the SoC begins configuration or processor startup. Validate both static rail tolerances and transient response under maximum fabric activity. An oscilloscope measurement at the device supply pins is preferable to relying only on measurements at the regulator.
Use the AMD Zynq-7000 package and design guidance for bank voltage compatibility, dedicated pins, clocking, and configuration. Keep high-speed differential interfaces away from noisy switching nodes, maintain continuous reference planes beneath routed pairs, and follow the manufacturer-recommended geometry for length matching. Clock pins and configuration signals require particular care because routing errors can prevent configuration or create intermittent field failures that are difficult to diagnose from software symptoms.
Do not treat every XC7Z012S CLG485 ordering code as an exact replacement. The -1 and -2 suffixes change processor speed, while C, E, and I identify different temperature classes. Confirm the original design's timing assumptions, environmental requirements, device status, and ordering documentation before substituting a suffix variant. Also ensure that the FPGA bitstream, software image, constraints, and boot configuration target the exact selected device rather than a generic Zynq-7000 model.
コンプライアンス情報
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for the exact ordering code was identified. The device is classified as an industrial-temperature FPGA SoC rather than an AEC-Q100-qualified automotive device.