XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD
部品番号: XC7Z015-1CLG485I ✓ 生産中XC7Z015-1CLG485I 概要
A Zynq-7000 SoC is an FPGA and programmable system-on-chip architecture that integrates FPGA logic with a hard-processor subsystem. The FPGA fabric supports parallel hardware processing, while the ARM Cortex-A9 subsystem supports operating systems, networking, control functions, and application software. This hierarchy places the XC7Z015 within the FPGA and SoC family and makes it useful where designers need both software flexibility and hardware-level performance.
The principal device characteristics are two Cortex-A9 MPCore processors operating at 667MHz, 74K FPGA logic cells, CoreSight debug support, and a 485-CSPBGA package. The -1 speed designation identifies the device performance grade, while CLG485 identifies the 485-ball package. Industrial-temperature and extended-temperature behavior should be confirmed against the exact ordering code and AMD documentation before deployment.
Architecturally, the XC7Z015 separates processor-side and programmable-logic functions while allowing designers to exchange information through high-bandwidth interfaces. Parallel accelerator logic can execute filtering, encryption, video processing, or interface conversion at deterministic rates, while the processor subsystem controls data flow and operating-system functions. CoreSight provides integrated visibility for processor-based debugging and trace-oriented development workflows.
Typical uses include industrial machine vision, networked industrial control, communications equipment, high-performance embedded processing, and FPGA-assisted data acquisition. The dual-core processor configuration can support partitioning between an operating system and control tasks, while the 74K logic cells can accelerate parallel datapaths without requiring a separate FPGA. Software-defined controls, protocol conversion, and sensor fusion are additional suitable workloads.
Board design requires careful attention to the 19 mm by 19 mm BGA escape routing, power sequencing, decoupling, and thermal performance. Use AMD package files and the Zynq-7000 package pinout resources when assigning power, ground, high-speed memory, and I/O pins. Differential and high-speed interfaces should be routed with controlled impedance and verified against the relevant Zynq-7000 guidance.
This product page combines exact catalog identifiers, device architecture, package details, qualification alternatives, comparison data, and implementation guidance. It also organizes replacement and selection questions around the constraints that determine whether a candidate is genuinely usable on the same PCB.
ドロップイン代替品: XC7Z015-1CLG485I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC7Z015-1CLG485I (同一形状・フットプリント) — 相違点: Device Type, Mounting Type, Package, Debug Support, FPGA Logic Cells.
XC7Z015-L1CLG485I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7Z015-2CLG485I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z015-1CLG485C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z015-1CLG485I4360
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7Z015-CLG485
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC7Z015-2CLG485E
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC7Z015-1CLG485I 最大定格&電気的特性
| Device Type | Zynq-7000 Artix-7 FPGA system on chip |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| Processor Frequency | 667 MHz |
| FPGA Logic Cells | 74K logic cells |
| Debug Support | CoreSight |
| パッケージ | 485-CSPBGA, 19 mm x 19 mm |
| Ball Count | 485 balls |
| Performance Grade | -1 speed grade |
| Product Type | SoC FPGA with integrated ARM Cortex-A9 processors |
| 実装タイプ | Surface mount BGA |
| Clock Frequency | 667 MHz Cortex-A9 processor frequency |
| Device Architecture | Zynq-7000 programmable logic and processor system on chip |
XC7Z015-1CLG485I 485-cspbga, 19 mm x 19 mm ピン配置ガイド
XC7Z015-1CLG485I (485-cspbga, 19 mm x 19 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC7Z015-1CLG485I.
詳細は データシート をご参照ください。
主な用途
XC7Z015-1CLG485I の用途: 6 件s: Industrial Machine Vision, Industrial Control, Embedded Networking Equipment, High-Performance Data Acquisition, Secure Communications Terminal, Test and Measurement Instrument.
Industrial Machine Vision
The XC7Z015-1CLG485I fits machine-vision systems that combine image acquisition, preprocessing, and higher-level control. Its 74K FPGA logic cells can accelerate parallel pixel operations, filtering, thresholding, or interface conversion, while the dual 667MHz Cortex-A9 cores can execute camera control, networking, and inspection logic. The integrated architecture reduces inter-device data movement and software latency. Designers should use the AMD package files to route the BGA power, ground, and high-speed interfaces correctly.
おすすめ
Industrial Control
The XC7Z015-1CLG485I is appropriate for control platforms requiring operating-system support and deterministic programmable logic on one device. The two 667MHz Cortex-A9 cores can divide tasks among real-time control, communications, diagnostics, and supervisory functions, while the FPGA fabric can implement fast I/O, counters, timing blocks, or custom motor-control interfaces. This partition reduces external component count compared with separate MCU and FPGA designs. Power sequencing, decoupling, and thermal analysis remain essential for reliable industrial operation.
おすすめ
Embedded Networking Equipment
The XC7Z015-1CLG485I can serve networking and protocol-conversion equipment because its dual Cortex-A9 subsystem handles control-plane software while FPGA logic accelerates packet inspection, framing, or data movement. The 667MHz processor rating and 74K logic cells provide a balanced architecture for protocol gateways, industrial communications nodes, and embedded network appliances. The processor can manage configuration and management while dedicated logic handles fixed-rate datapaths. High-speed board routing should follow AMD impedance and clocking guidance.
おすすめ
High-Performance Data Acquisition
The XC7Z015-1CLG485I supports data-acquisition designs that need both high-throughput sampling and flexible downstream processing. FPGA fabric can handle parallel ADC interfaces, digital filtering, triggering, and buffer management, while the dual 667MHz Cortex-A9 cores can perform analysis, configuration, networking, and storage coordination. Integrating these functions can reduce repeated transfers across an external bus. Designers should evaluate memory bandwidth, clock-jitter requirements, and synchronization when assigning the processor and programmable-logic interfaces.
おすすめ
Secure Communications Terminal
The XC7Z015-1CLG485I can implement secure communications endpoints where the processor manages protocols and the FPGA accelerates encryption, compression, or channel processing. Its two Cortex-A9 cores provide capacity for control software, while 74K logic cells allow parallel datapaths to run without continuous processor intervention. CoreSight also supports processor debugging during firmware integration. For field deployment, confirm the exact ordering code's temperature coverage, security features, and lifecycle requirements against the product specification.
おすすめ
Test and Measurement Instrument
The XC7Z015-1CLG485I is suitable for modular test and measurement equipment that combines instrument control with real-time signal processing. The processor subsystem can execute test sequencing, GUI communications, and configuration, while FPGA logic can perform waveform generation, digital pattern processing, or fast acquisition. The device's 667MHz dual-core configuration separates orchestration from latency-sensitive work. Interface timing, clock quality, and analog-to-digital converter integration determine the achievable performance of the complete instrument.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC7Z015-1CLG485I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC7Z015-L1CLG485I | XC7Z015-2CLG485I | XC7Z015-1CLG485C | XC7Z015-1CLG485I4360 | XC7Z015-CLG485 |
|---|---|---|---|---|---|---|
| Package | 485-CSPBGA (19x19 mm) | 485-CSPBGA (19x19 mm) | 485-CSPBGA (19x19 mm) | 485-CSPBGA (19x19 mm) | 485-CSPBGA (19x19 mm) | 485-CSPBGA (19x19 mm) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor Configuration | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Performance Grade | -1 | -1 | -2 | -1 | -1 | Not specified by suffix |
| Temperature Suffix | I | L1 variant; -40°C to 100°C listed junction range | Not specified | C commercial-grade suffix | I industrial-grade suffix | Not specified |
| Product Type | Zynq-7000 Artix-7 FPGA SoC | Zynq-7000 FPGA SoC | Zynq-7000 FPGA SoC | Zynq-7000 FPGA SoC | Zynq-7000 FPGA SoC | Zynq-7000 FPGA SoC |
主な差別化要因
- Industrial-grade ordering option within the exact -1 speed configuration (vs XC7Z015-1CLG485C)
- Lower speed grade with a lower performance ceiling (vs XC7Z015-2CLG485I)
- L1-qualified ordering pathway for qualification-sensitive programs (vs XC7Z015-L1CLG485I)
- Explicit dual-core 667MHz integration with 74K FPGA logic (vs XC7Z015-CLG485)
設計ノート
Build the board from AMD's CLG485 package pinout and placement resources rather than inferring ball assignments from the commercial designation. The 485-CSPBGA land pattern is dense, and power, ground, configuration, memory, and high-speed I/O pins have device-specific requirements. Preserve the package geometry and escape-routing rules, and include all required power and ground connections even when a particular ball is marked NC for one family member.
Implement the Zynq-7000 power rails as a separately sequenced, well-decoupled network. Follow the rail names, voltage limits, and sequencing relationships in the manufacturer data sheet and board-design guidance. Place bulk and high-frequency decoupling capacitors close to their assigned BGA balls, maintain the required via and return-path structure, and test power rails for droop during processor and FPGA activity before finalizing component values.
The 19 mm by 19 mm BGA limits the available heat-dissipation area, so estimate junction temperature from total device power, package thermal characteristics, PCB copper, airflow, and the enclosure. Pay particular attention to dense processor workloads and simultaneous programmable-logic activity. Validate with thermocouples or infrared measurements under worst-case conditions, because board-layer and via construction can materially change the thermal result.
Route memory and other high-speed interfaces as controlled-impedance paths using the widths and spacing defined by AMD's implementation guidance. Account for BGA breakout, reference-plane continuity, pair skew, connector or device transitions, and return-path discontinuities. Use the package placement diagram to identify neighboring signal aggressors, then validate the final layout with simulation and eye-pattern measurements.
Do not substitute a related XC7Z015 ordering code solely because it uses the same CLG485 package. Compare the -1 or -2 speed grade, I, C, E, or L1 temperature and qualification suffix, lifecycle requirements, and exact ball descriptions. In particular, compatibility between XC7Z015-CLG485 and XC7Z030-SBG485 includes pins that are NC on one device and connected on the other, demonstrating why package similarity alone is insufficient.
コンプライアンス情報
The available product information does not provide a complete compliance declaration for this exact ordering code. Confirm RoHS, REACH, halogen-free, lead-free, conflict-minerals, and automotive qualification status with AMD using the full MPN.