AMD

XC7Z015-1CLG485I - 667MHz Dual-Core Zynq SoC | AMD

料号: XC7Z015-1CLG485I ✓ 量产中
485-CSPBGA, 19 mm x 19 mm Package 667 MHz Speed
最小起订量: 1 |

XC7Z015-1CLG485I 概述

The AMD XC7Z015-1CLG485I is a Zynq-7000 Artix-7 FPGA system on chip with two 667MHz ARM Cortex-A9 MPCore processors, CoreSight debug capability, 74K logic cells, and a 485-CSPBGA package measuring 19 mm by 19 mm. It combines programmable FPGA fabric with a dedicated dual-core processing system in one device.

A Zynq-7000 SoC is an FPGA and programmable system-on-chip architecture that integrates FPGA logic with a hard-processor subsystem. The FPGA fabric supports parallel hardware processing, while the ARM Cortex-A9 subsystem supports operating systems, networking, control functions, and application software. This hierarchy places the XC7Z015 within the FPGA and SoC family and makes it useful where designers need both software flexibility and hardware-level performance.

The principal device characteristics are two Cortex-A9 MPCore processors operating at 667MHz, 74K FPGA logic cells, CoreSight debug support, and a 485-CSPBGA package. The -1 speed designation identifies the device performance grade, while CLG485 identifies the 485-ball package. Industrial-temperature and extended-temperature behavior should be confirmed against the exact ordering code and AMD documentation before deployment.

Architecturally, the XC7Z015 separates processor-side and programmable-logic functions while allowing designers to exchange information through high-bandwidth interfaces. Parallel accelerator logic can execute filtering, encryption, video processing, or interface conversion at deterministic rates, while the processor subsystem controls data flow and operating-system functions. CoreSight provides integrated visibility for processor-based debugging and trace-oriented development workflows.

Typical uses include industrial machine vision, networked industrial control, communications equipment, high-performance embedded processing, and FPGA-assisted data acquisition. The dual-core processor configuration can support partitioning between an operating system and control tasks, while the 74K logic cells can accelerate parallel datapaths without requiring a separate FPGA. Software-defined controls, protocol conversion, and sensor fusion are additional suitable workloads.

Board design requires careful attention to the 19 mm by 19 mm BGA escape routing, power sequencing, decoupling, and thermal performance. Use AMD package files and the Zynq-7000 package pinout resources when assigning power, ground, high-speed memory, and I/O pins. Differential and high-speed interfaces should be routed with controlled impedance and verified against the relevant Zynq-7000 guidance.

This product page combines exact catalog identifiers, device architecture, package details, qualification alternatives, comparison data, and implementation guidance. It also organizes replacement and selection questions around the constraints that determine whether a candidate is genuinely usable on the same PCB.

直接替换替代料: XC7Z015-1CLG485I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: XC7Z015-1CLG485I (相同外形与封装尺寸) ——差异在于 Device Type, Mounting Type, Package, Debug Support, FPGA Logic Cells.

AMD
Device Type: Zynq-7000 SoC FPGA
Package: 484-CSPBGA
FPGA Logic Cells: 74K
对比 XC7Z015-1CLG485I →
AMD
Mounting Type: Surface-mount BGA
对比 XC7Z015-1CLG485I →
AMD
Device Type: Zynq-7000 SoC (FPGA SoC, programmable logic + application processor)
Mounting Type: Surface Mount (BGA)
Debug Support: CoreSight on-chip debug
对比 XC7Z015-1CLG485I →
AMD
Device Type: Zynq-7000 SoC with FPGA logic and dual-core Arm Cortex-A9 processor
Mounting Type: Surface mount
Package: 485-CSPBGA, 19 x 19 mm
对比 XC7Z015-1CLG485I →

XC7Z015-L1CLG485I

✅ 直接替换
📦 485-CSPBGA (19x19 mm)
Same XC7Z015 device and 485-CSPBGA footprint at 667MHz; the L1 qualification suffix changes screening and temperature criteria, with a listed -40°C to 100°C junction range.

📋 参考替代料(不在目录中)

XC7Z015-2CLG485I

✅ 直接替换
AMD
📦 485-CSPBGA (19x19 mm)
Zynq-7000 SoC with FPGA logic and dual-core Arm Cortex-A9 processor · Dual-core Arm Cortex-A9 MPCore · 32-bit RISC · 766 MHz · 74K logic cells · CoreSight · Artix-7 FPGA · Zynq-7000

联系询价

查看数据手册 →

XC7Z015-1CLG485C

✅ 直接替换
AMD
📦 485-CSPBGA (19x19 mm)
Zynq-7000 adaptive system-on-chip with integrated FPGA · Dual-core Arm Cortex-A9 MPCore · 667 MHz · Artix-7 · 74K logic cells · 150 I/O · 130 PS I/O · CoreSight

联系询价

查看数据手册 →

XC7Z015-1CLG485I4360

✅ 直接替换
📦 485-CSPBGA (19x19 mm)
Same XC7Z015 base device, -1 speed grade, I suffix, and CLG485 package; the additional 4360 suffix requires ordering-code verification for lifecycle or program treatment.

📋 参考替代料(不在目录中)

XC7Z015-CLG485

✅ 直接替换
📦 485-CSPBGA (19x19 mm)
Same XC7Z015 base device and CLG485 footprint, but it omits the target's -1 speed and I temperature-grade suffixes, so its specified limits differ.

📋 参考替代料(不在目录中)

XC7Z015-2CLG485E

✅ 直接替换
AMD
📦 485-CSPBGA (19x19 mm)
Zynq-7000 SoC (FPGA SoC, programmable logic + application processor) · Dual ARM Cortex-A9 MPCore with CoreSight debug · Artix-7 class, 74K logic cells · 766 MHz · -2 · E (extended commercial grade) · 485-CSPBGA (CLG485), 19 x 19 mm, surface mount · 485

联系询价

查看数据手册 →

XC7Z015-1CLG485I 最大额定值与电气特性

Device Type Zynq-7000 Artix-7 FPGA system on chip
Processor Core Dual ARM Cortex-A9 MPCore
Processor Frequency 667 MHz
FPGA Logic Cells 74K logic cells
Debug Support CoreSight
封装 485-CSPBGA, 19 mm x 19 mm
Ball Count 485 balls
Performance Grade -1 speed grade
Product Type SoC FPGA with integrated ARM Cortex-A9 processors
安装类型 Surface mount BGA
Clock Frequency 667 MHz Cortex-A9 processor frequency
Device Architecture Zynq-7000 programmable logic and processor system on chip

XC7Z015-1CLG485I 485-cspbga, 19 mm x 19 mm 引脚配置指南

XC7Z015-1CLG485I(485-cspbga, 19 mm x 19 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

XC7Z015-1CLG485I 的 485-cspbga, 19 mm x 19 mm 封装引脚图

暂无详细引脚数据: XC7Z015-1CLG485I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

XC7Z015-1CLG485I 适用于 6 应用s: Industrial Machine Vision, Industrial Control, Embedded Networking Equipment, High-Performance Data Acquisition, Secure Communications Terminal, Test and Measurement Instrument.

🏭

Industrial Machine Vision

The XC7Z015-1CLG485I fits machine-vision systems that combine image acquisition, preprocessing, and higher-level control. Its 74K FPGA logic cells can accelerate parallel pixel operations, filtering, thresholding, or interface conversion, while the dual 667MHz Cortex-A9 cores can execute camera control, networking, and inspection logic. The integrated architecture reduces inter-device data movement and software latency. Designers should use the AMD package files to route the BGA power, ground, and high-speed interfaces correctly.

🏭

Industrial Control

The XC7Z015-1CLG485I is appropriate for control platforms requiring operating-system support and deterministic programmable logic on one device. The two 667MHz Cortex-A9 cores can divide tasks among real-time control, communications, diagnostics, and supervisory functions, while the FPGA fabric can implement fast I/O, counters, timing blocks, or custom motor-control interfaces. This partition reduces external component count compared with separate MCU and FPGA designs. Power sequencing, decoupling, and thermal analysis remain essential for reliable industrial operation.

🌐

Embedded Networking Equipment

The XC7Z015-1CLG485I can serve networking and protocol-conversion equipment because its dual Cortex-A9 subsystem handles control-plane software while FPGA logic accelerates packet inspection, framing, or data movement. The 667MHz processor rating and 74K logic cells provide a balanced architecture for protocol gateways, industrial communications nodes, and embedded network appliances. The processor can manage configuration and management while dedicated logic handles fixed-rate datapaths. High-speed board routing should follow AMD impedance and clocking guidance.

🖥️

High-Performance Data Acquisition

The XC7Z015-1CLG485I supports data-acquisition designs that need both high-throughput sampling and flexible downstream processing. FPGA fabric can handle parallel ADC interfaces, digital filtering, triggering, and buffer management, while the dual 667MHz Cortex-A9 cores can perform analysis, configuration, networking, and storage coordination. Integrating these functions can reduce repeated transfers across an external bus. Designers should evaluate memory bandwidth, clock-jitter requirements, and synchronization when assigning the processor and programmable-logic interfaces.

🌐

Secure Communications Terminal

The XC7Z015-1CLG485I can implement secure communications endpoints where the processor manages protocols and the FPGA accelerates encryption, compression, or channel processing. Its two Cortex-A9 cores provide capacity for control software, while 74K logic cells allow parallel datapaths to run without continuous processor intervention. CoreSight also supports processor debugging during firmware integration. For field deployment, confirm the exact ordering code's temperature coverage, security features, and lifecycle requirements against the product specification.

🔧

Test and Measurement Instrument

The XC7Z015-1CLG485I is suitable for modular test and measurement equipment that combines instrument control with real-time signal processing. The processor subsystem can execute test sequencing, GUI communications, and configuration, while FPGA logic can perform waveform generation, digital pattern processing, or fast acquisition. The device's 667MHz dual-core configuration separates orchestration from latency-sensitive work. Interface timing, clock quality, and analog-to-digital converter integration determine the achievable performance of the complete instrument.

推荐产品汇总

XC7Z012-CLG485 Zynq-7000 package-placement reference 用于: Industrial Machine Vision, Industrial Control, High-Performance Data Acquisition XC7Z015-CLG485 Base device family reference 用于: Industrial Machine Vision XC7Z010 Zynq-7000 SoC family reference 用于: Industrial Control, High-Performance Data Acquisition XC7Z030-SBG485 Zynq-7000 compatibility reference 用于: Embedded Networking Equipment XC7Z015-2CLG485I AMD 用于: Embedded Networking Equipment, Test and Measurement Instrument XC7Z015-L1CLG485I L1-qualified same-package option 用于: Secure Communications Terminal XC7Z015-1CLG485C AMD 用于: Secure Communications Terminal XC7Z020 Zynq-7000 family capacity reference 用于: Test and Measurement Instrument
What are the key specifications of XC7Z015-1CLG485I that engineers should know?
The XC7Z015-1CLG485I integrates a dual-core ARM Cortex-A9 processor running at 667MHz with 74K FPGA logic cells in a 485-CSPBGA package measuring 19 mm by 19 mm. According to the AMD Zynq-7000 SoC data sheet DS187, the Zynq-7000 family combines a programmable processing system with Artix-7 FPGA fabric. CoreSight debug capability is also specified. These figures define its main suitability for embedded Linux, industrial control, machine vision, communications, and hardware-assisted data processing.
What is the processing architecture of the XC7Z015-1CLG485I?
The XC7Z015-1CLG485I uses two ARM Cortex-A9 MPCore processors operating at 667MHz alongside 74K logic cells of Artix-7 FPGA fabric. According to the AMD Zynq-7000 SoC data sheet DS187, the processor subsystem executes control software while the programmable logic accelerates parallel datapaths. CoreSight is included for processor debug and trace support. This combined architecture is more capable than a conventional microcontroller and more software-accessible than a fixed-function signal processor.
Where can I download the XC7Z015 datasheet PDF?
The official XC7Z015 datasheet is available through AMD's DS187 document, which covers the XC7Z010 through XC7Z020 devices. The manufacturer link on this page opens that data sheet directly. For the physical ball map and package assignments, AMD also publishes Zynq-7000 package pinout files and the UG585 package-placement material. Use both the data sheet for electrical characteristics and the package files for PCB land patterns and pin definitions.
Where can I find the XC7Z015-1CLG485I pinout and package information?
The XC7Z015-1CLG485I uses a 485-CSPBGA package measuring 19 mm by 19 mm. AMD's Zynq-7000 package-device pinout resource provides ASCII and CSV package files, while the UG585 package-placement diagram identifies the XC7Z015-CLG485 device arrangement. Use these manufacturer resources for ball assignments, exposed power and ground connections, and board-layout geometry. The single listing snippet does not provide a complete 485-ball table.
Is the XC7Z015-1CLG485I suitable for industrial control systems?
The XC7Z015-1CLG485I is suitable for many industrial control architectures that benefit from software control combined with parallel hardware logic. Its dual 667MHz Cortex-A9 cores can run control software, while 74K FPGA logic cells can implement deterministic acquisition, protocol conversion, or motor-control datapaths. The exact operating-temperature limits are not stated in the available product listing, so the ordering code and AMD DS187 data sheet must be checked against the system's environmental requirements.
XC7Z015-1CLG485I vs XC7Z015-2CLG485I - which is better for performance-sensitive applications?
The XC7Z015-2CLG485I is the faster -2 performance-grade option, while the XC7Z015-1CLG485I is identified at 667MHz. For a new design with the strictest processing-throughput requirement, compare the processor and memory-interface timing limits in AMD DS187. For a design already operating at the -1 limits, the XC7Z015-1CLG485I may be sufficient and avoids purchasing the faster grade. Both catalog identifiers use the CLG485 package designation.
When should I choose XC7Z015-1CLG485I over XC7Z015-1CLG485C?
Choose XC7Z015-1CLG485I when the design requires the industrial temperature-grade ordering option indicated by the I suffix; choose XC7Z015-1CLG485C when commercial-temperature operation is acceptable. Both retain the same XC7Z015 base device, -1 performance grade, and CLG485 package designation. The available listing confirms that the C variant exists, but it does not publish the two versions' full temperature ranges, so consult DS187 and the ordering-information table before final selection.
What is the best drop-in replacement for XC7Z015-1CLG485I?
The closest documented same-package options are XC7Z015-L1CLG485I, XC7Z015-2CLG485I, XC7Z015-1CLG485C, and XC7Z015-1CLG485I4360, all using the CLG485 package family. No cross-brand pin-compatible replacement was identified. Device speed grade, temperature grade, lifecycle status, and exact ball-level functionality must be compared before substitution. A mechanically identical BGA is not automatically a functional drop-in replacement for this programmable SoC.
Can XC7Z015-L1CLG485I replace XC7Z015-1CLG485I on the same PCB?
The XC7Z015-L1CLG485I is the closest same-package replacement candidate because it uses the same CLG485 package and maintains the 667MHz processor rating. The GlobalSpec entry lists an operating junction-temperature range of -40°C to 100°C for the L1 variant. Its L1 qualification designation may change temperature, screening, or longevity requirements, so verify those details and the complete pinout before approving it as a drop-in replacement.
What can replace XC7Z015-1CLG485I in a new Zynq design?
A replacement should remain in the XC7Z015 family and CLG485 package to minimize PCB risk. XC7Z015-2CLG485I offers a faster performance grade, XC7Z015-1CLG485C provides the commercial-temperature suffix, and XC7Z015-L1CLG485I provides the L1-qualified ordering option. Each changes at least one qualification or performance attribute, so replacement approval should compare DS187 timing, temperature coverage, lifecycle requirements, and the exact pin-description table.
Is XC7Z015-1CLG485I the same as XC7Z015-CLG485?
No, XC7Z015-CLG485 is the base device designation, while XC7Z015-1CLG485I adds a -1 speed grade and an I temperature-grade suffix. The CLG485 portion identifies the same 485-ball package family. The suffix therefore affects procurement and qualification even though the underlying XC7Z015 device family and CLG485 land pattern are shared. Use the full ordering code when creating a BOM.
Where can I buy XC7Z015-1CLG485I and check its availability?
Use the Request a Quote form on this page to request current XC7Z015-1CLG485I availability, minimum order quantity, and lead time. The available listings identify the exact MPN, but they do not provide a qualifying quantity-break price table. The XAIPART quote workflow allows procurement to confirm the exact suffix, factory packaging, and available quantity without relying on an ambiguous family-level listing.
How much does XC7Z015-1CLG485I cost?
Use the Request a Quote form on this page for the current unit price and volume pricing for the exact XC7Z015-1CLG485I ordering code. The available product page shows a starting amount, but it does not present explicit quantity breaks for the exact MPN and therefore cannot serve as a complete price schedule. A formal quote also confirms stock, lead time, and the correct 485-CSPBGA package variant.
What is the lead time and stock status for XC7Z015-1CLG485I?
Request the current lead time and stock quantity through the Request a Quote form on this page. The available listings indicate that XC7Z015-1CLG485I is offered for ordering, but they do not provide a dated, exact-MPN inventory commitment. Procurement should include the full MPN, required quantity, and delivery location in the request so the response reflects the correct AMD/Xilinx supply channel.
Is there a cross-brand equivalent for XC7Z015-1CLG485I?
No cross-brand drop-in equivalent was identified for the XC7Z015-1CLG485I. This is a tightly integrated AMD Zynq-7000 SoC with an ARM Cortex-A9 subsystem, 74K logic cells, and a proprietary 485-CSPBGA interface, so a mechanically similar FPGA is not necessarily software- or pin-compatible. The practical alternatives are same-family AMD ordering variants such as XC7Z015-2CLG485I, XC7Z015-1CLG485C, and XC7Z015-L1CLG485I.

工程参考数据: XC7Z015-1CLG485I ——对比、设计指导和合规信息。

选型指南

Choose XC7Z015-1CLG485I when the design needs a 667MHz dual-core Cortex-A9 processor, 74K FPGA logic cells, and an industrial-grade I suffix in the 485-CSPBGA package. Choose XC7Z015-2CLG485I when the additional speed-grade capability justifies reviewing higher-performance timing limits. Choose XC7Z015-1CLG485C when commercial-temperature operation is acceptable, and choose XC7Z015-L1CLG485I when an L1-qualified ordering pathway is required. XC7Z015-CLG485 lacks explicit -1 and I suffixes and should be selected only after confirming its grade limits. No cross-brand equivalent was identified because the processor subsystem, FPGA fabric, pinout, and software support are tightly coupled. For every alternative, compare the complete ball table, temperature requirements, lifecycle expectations, and the exact ordering suffix before approving a PCB reuse.

与替代料对比

参数 本产品 XC7Z015-L1CLG485I XC7Z015-2CLG485I XC7Z015-1CLG485C XC7Z015-1CLG485I4360 XC7Z015-CLG485
Package 485-CSPBGA (19x19 mm) 485-CSPBGA (19x19 mm) 485-CSPBGA (19x19 mm) 485-CSPBGA (19x19 mm) 485-CSPBGA (19x19 mm) 485-CSPBGA (19x19 mm)
Brand AMD AMD AMD AMD AMD AMD
Processor Configuration Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Performance Grade -1 -1 -2 -1 -1 Not specified by suffix
Temperature Suffix I L1 variant; -40°C to 100°C listed junction range Not specified C commercial-grade suffix I industrial-grade suffix Not specified
Product Type Zynq-7000 Artix-7 FPGA SoC Zynq-7000 FPGA SoC Zynq-7000 FPGA SoC Zynq-7000 FPGA SoC Zynq-7000 FPGA SoC Zynq-7000 FPGA SoC

关键差异点

  • Industrial-grade ordering option within the exact -1 speed configuration (对比 XC7Z015-1CLG485C)
  • Lower speed grade with a lower performance ceiling (对比 XC7Z015-2CLG485I)
  • L1-qualified ordering pathway for qualification-sensitive programs (对比 XC7Z015-L1CLG485I)
  • Explicit dual-core 667MHz integration with 74K FPGA logic (对比 XC7Z015-CLG485)

设计说明

Build the board from AMD's CLG485 package pinout and placement resources rather than inferring ball assignments from the commercial designation. The 485-CSPBGA land pattern is dense, and power, ground, configuration, memory, and high-speed I/O pins have device-specific requirements. Preserve the package geometry and escape-routing rules, and include all required power and ground connections even when a particular ball is marked NC for one family member.

Implement the Zynq-7000 power rails as a separately sequenced, well-decoupled network. Follow the rail names, voltage limits, and sequencing relationships in the manufacturer data sheet and board-design guidance. Place bulk and high-frequency decoupling capacitors close to their assigned BGA balls, maintain the required via and return-path structure, and test power rails for droop during processor and FPGA activity before finalizing component values.

The 19 mm by 19 mm BGA limits the available heat-dissipation area, so estimate junction temperature from total device power, package thermal characteristics, PCB copper, airflow, and the enclosure. Pay particular attention to dense processor workloads and simultaneous programmable-logic activity. Validate with thermocouples or infrared measurements under worst-case conditions, because board-layer and via construction can materially change the thermal result.

Route memory and other high-speed interfaces as controlled-impedance paths using the widths and spacing defined by AMD's implementation guidance. Account for BGA breakout, reference-plane continuity, pair skew, connector or device transitions, and return-path discontinuities. Use the package placement diagram to identify neighboring signal aggressors, then validate the final layout with simulation and eye-pattern measurements.

Do not substitute a related XC7Z015 ordering code solely because it uses the same CLG485 package. Compare the -1 or -2 speed grade, I, C, E, or L1 temperature and qualification suffix, lifecycle requirements, and exact ball descriptions. In particular, compatibility between XC7Z015-CLG485 and XC7Z030-SBG485 includes pins that are NC on one device and connected on the other, demonstrating why package similarity alone is insufficient.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The available product information does not provide a complete compliance declaration for this exact ordering code. Confirm RoHS, REACH, halogen-free, lead-free, conflict-minerals, and automotive qualification status with AMD using the full MPN.

相关搜索

xc7z015 1clg485i xc7z015 2clg485i xc7z015 1clg485c xc7z015 2clg485e xc7z015 l1clg485i xc7z015 datasheet xc7z015 2clg485i datasheet xc7z015 clg485 zynq xc7z015 xilinx xc7z015 XC7Z015-1CLG485I datasheet pdf XC7Z015-1CLG485I pinout XC7Z015-1CLG485I replacement XC7Z015-1CLG485I price XC7Z015-1CLG485I stock

相关元器件 & 术语

AMD AMD Xilinx XC7Z015-1CLG485I XC7Z015-CLG485 XC7Z015-L1CLG485I XC7Z015-2CLG485I XC7Z015-1CLG485C XC7Z015-1CLG485I4360 XC7Z015-2CLG485E XC7Z012-CLG485 XC7Z030-SBG485 Zynq-7000 Artix-7 FPGA FPGA SoC system on chip ARM Cortex-A9 MPCore CoreSight programmable logic 485-CSPBGA BGA package surface mount 667MHz processor 74K logic cells DS187 UG585
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情