XC9572XL-5VQG64C - 72-Macrocell 5 ns CPLD | AMD | VQFP-64
部品番号: XC9572XL-5VQG64C ✗ 生産終了XC9572XL-5VQG64C 概要
A CPLD is a programmable logic device positioned between simple PAL/GAL logic and larger FPGAs. Its macrocells combine programmable AND/OR logic with registered outputs, allowing compact implementations of control logic, interface translation, decoding, counters, and state machines. The XC9572XL belongs to the Xilinx XC9500XL family and is targeted at low-voltage communications and computing systems requiring deterministic logic implementation without a large FPGA configuration memory or complex routing fabric.
The device contains 72 macrocells, 1,600 usable gates, and 52 user I/O pins. Its 5 ns speed designation identifies the device as the fastest specified grade in the target family. The 3.3 V operating supply and low-voltage architecture suit modern control and interface systems, while in-system programming permits configuration without removing the device from its assembled circuit. The programming interface can support repeated field updates when the system provides the required control logic and power management.
Functionally, the four logic array blocks connect to peripheral input and output blocks through the internal interconnect. Each macrocell can implement combinational equations, registered functions, and product-term feedback according to the device architecture described in AMD datasheet DS057. This structure provides more predictable timing for fixed logic than a general-purpose FPGA and remains useful for legacy equipment, industrial controllers, communication interfaces, and compact glue-logic designs that must reproduce an established CPLD design.
Typical applications include protocol-interface logic, data-format conversion, bus arbitration, peripheral control, address decoding, industrial automation, and embedded system sequencing. The 52 user I/O pins are particularly useful when a design needs numerous moderate-speed digital connections without moving to a larger programmable-logic device. Legacy replacement projects can also benefit from the device's combination of 72 macrocells, 1,600 usable gates, and in-system programmability.
Design work should begin by confirming that the existing schematic, PCB footprint, pin assignments, and programming algorithm match the 64-pin VQFP device. Stable power sequencing, input conditioning, output loading, and programming-signal integrity are essential because CPLD behavior depends on correct configuration and power delivery. The exact pin names, programming algorithm, and electrical limits should be taken directly from the AMD datasheet and device documentation before layout release.
This product page combines the XC9572XL device characteristics with same-family replacement options, package-aware comparisons, application guidance, and practical design checks. It helps engineers identify the correct speed grade, assess migration options, and plan PCB or firmware work without overlooking configuration, supply, and timing constraints.
ドロップイン代替品: XC9572XL-5VQG64C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC9572XL-5VQG64C (同一形状・フットプリント) — 相違点: Package, Speed Grade, Usable Gates, User I/O Count, User I/O Pins.
XC9572XL-5VQ64C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC9572XL-5VQG64I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC9572XL-7VQG64C
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XC9572XL-7VQG64I
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC9572XL-10VQG64C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC9572XL-10VQG64I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC9572XL-5VQG64C 最大定格&電気的特性
| Device Type | In-System Programmable CPLD |
| Number of Macrocells | 72 macrocells |
| Usable Gates | 1,600 gates |
| User I/O Pins | 52 pins |
| Propagation Delay | 5 ns |
| Nominal Supply Voltage | 3.3 V |
| Internal Supply Voltage Range | 3 V to 3.6 V |
| Logic Array Blocks | 4 blocks |
| Architecture | Four 54V18 function blocks |
| Programming Method | In-System Programmable |
| Minimum Program/Erase Cycles | 10,000 cycles |
| パッケージ | 64-pin VQFP |
| Technology | 0.35 µm CMOS |
| RoHS ステータス | RoHS Compliant |
| Lead-Free Status | Lead Free |
| Maximum Frequency | 178.6 MHz |
XC9572XL-5VQG64C 64-pin vqfp ピン配置ガイド
XC9572XL-5VQG64C (64-pin vqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC9572XL-5VQG64C.
詳細は データシート をご参照ください。
主な用途
XC9572XL-5VQG64C の用途: 6 件s: Industrial Control and Automation, Communication Interface Logic, Legacy Peripheral Interface Replacement, Bus Arbitration and Address Decoding, Data Acquisition Signal Conditioning, Embedded Sequencing and State-Machine Control.
Industrial Control and Automation
The XC9572XL-5VQG64C is suitable for compact industrial control logic because it combines 72 macrocells, 1,600 usable gates, and 52 user I/O pins in a 64-pin VQFP. It can implement sequencing, interlocks, signal conditioning, and peripheral-control functions without using a much larger FPGA. The 5 ns propagation-delay grade is useful for control paths that require short combinational delays. Because the family is legacy, designs must validate the exact temperature grade, supply sequencing, programming interface, and long-term component availability before production release.
おすすめ
Communication Interface Logic
The XC9572XL-5VQG64C can implement protocol framing, data-format conversion, parity generation, and interface isolation in communications equipment. Its 52 user I/O pins permit multiple parallel signals to be handled within one package, while the 72-macrocell array is sufficient for fixed control paths rather than highly variable datapath processing. The 5 ns timing class helps constrain short control loops, although external transceiver timing and board-level propagation must be included in the system budget. In-system programming supports configuration during manufacturing or controlled field updates.
おすすめ
Legacy Peripheral Interface Replacement
The XC9572XL-5VQG64C is a practical replacement target for systems built around the XC9500XL family because it preserves the established 72-macrocell, 1,600-gate architecture and 64-pin VQFP format. It is appropriate when a board requires the original 5 ns speed class, 52 user I/O pins, and in-system programming behavior. Migration should include pin-by-pin comparison, configuration-file compatibility review, and static timing analysis. The 5VQ64C orderable variant is the closest same-family candidate, while slower 7 ns and 10 ns grades require timing validation.
おすすめ
Bus Arbitration and Address Decoding
The XC9572XL-5VQG64C is well suited to deterministic bus-arbitration and address-decoding logic because fixed macrocell implementations provide predictable paths through a 72-cell device with 1,600 usable gates. The 52 user I/O pins can accommodate address, request, grant, interrupt, and status signals, while the 5 ns grade supports short control decisions. Engineers should budget external address-driver delay, bus loading, and synchronization requirements separately. The same-package 5VQ64C can serve as a direct replacement candidate when its exact qualification and marking requirements are acceptable.
おすすめ
Data Acquisition Signal Conditioning
The XC9572XL-5VQG64C can coordinate digital signal conditioning around an acquisition system by implementing channel-control logic, trigger handling, status decoding, and interface timing. Its 52 user I/O pins are useful for parallel sensor-control or data-routing signals, while the 72 macrocells allow moderate control complexity without moving to a larger FPGA. The device does not replace analog front-end conditioning, so noise-sensitive measurements still require suitable amplifiers and isolation. Timing closure must include delays introduced by sensors, converters, cable interfaces, and the selected system clocking scheme.
おすすめ
Embedded Sequencing and State-Machine Control
The XC9572XL-5VQG64C is effective for embedded sequencing, command decoding, and state-machine control because its 72 macrocells can combine combinational equations with registered outputs. The 5 ns propagation-delay option helps implement short decision paths, and 52 user I/O pins provide sufficient control connectivity for actuator and sensor sequencing. A robust design should include reset behavior, illegal-state recovery, and power-up configuration checks in the logic design. If the timing budget cannot tolerate the slower 7 ns or 10 ns grades, select the 5 ns family options instead.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC9572XL-5VQG64C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC9572XL-5VQ64C | XC9572XL-5VQG64I | XC9572XL-7VQG64C | XC9572XL-7VQG64I | XC9572XL-10VQG64C | XC9572XL-10VQG64I |
|---|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | VQFP-64 | VQFP-64 | VQFP-64 | VQFP-64 | VQFP-64 | VQFP-64 | VQFP-64 |
| Programmable Type | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
| Number of Macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells | 72 macrocells |
| Usable Gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates | 1,600 gates |
| User I/O Pins | 52 pins | 52 pins | 52 pins | 52 pins | 52 pins | 52 pins | 52 pins |
| Propagation Delay | 5 ns | 5 ns | 5 ns | 7 ns | 7 ns | 10 ns | 10 ns |
| Nominal Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Minimum Program/Erase Cycles | 10,000 cycles | 10,000 cycles | 10,000 cycles | 10,000 cycles | 10,000 cycles | 10,000 cycles | 10,000 cycles |
| Temperature Designation | Commercial-grade suffix C | Commercial-grade suffix C | Industrial-grade suffix I | Commercial-grade suffix C | Industrial-grade suffix I | Commercial-grade suffix C | Industrial-grade suffix I |
主な差別化要因
- Faster speed grade than the slower XC9572XL alternatives (vs XC9572XL-10VQG64C)
- Direct same-speed package-compatible replacement (vs XC9572XL-5VQ64C)
- Industrial-grade alternatives expand temperature-oriented sourcing options (vs XC9572XL-5VQG64I)
設計ノート
Use the 64-pin VQFP land pattern and pin table in AMD datasheet DS057 rather than a generic 64-pin square footprint. Begin the layout by separating the 52 user I/O routes from programming signals, then assign short tracks to clock or high-speed control paths. Check exposed pad, thermal relief, and assembly requirements against the exact package drawing before releasing the PCB files.
Design the 3.3 V rail for both normal operation and in-system programming. The documented internal supply range is 3 V to 3.6 V, so include startup sequencing, local bypass capacitance, and adequate source impedance as specified by the manufacturer. Verify that supply ramps do not leave the CPLD in an undefined configuration state and that programming-control levels remain within the device's specified input limits.
Do not treat XC9572XL-5VQ64C, XC9572XL-7VQG64C, and XC9572XL-10VQG64C as identical timing choices merely because they use the same family architecture. The speed class changes from 5 ns to 7 ns or 10 ns. Run static timing analysis on every replaced path, check the configuration file against the selected device, and preserve any required industrial temperature-grade suffix.
Keep the configuration interface and clock-related routes away from noisy analog or switching-power nodes, and use a ground reference that remains continuous beneath the device. Account for setup and hold requirements, programming-signal transitions, and simultaneous-switching noise in the board-level timing budget. If the CPLD drives long external cables or slow peripherals, add appropriate isolation rather than relying on the 5 ns internal propagation delay.
コンプライアンス情報
RoHS-compliant and lead-free status are identified for the exact device. REACH, halogen-free, and conflict-minerals status are unknown. AEC-Q100 is not applicable to this general-purpose CPLD.