XC9536XL-5VQG64C - 5 ns 36-Macrocell CPLD | AMD
部品番号: XC9536XL-5VQG64C ✓ 生産中XC9536XL-5VQG64C 概要
A complex programmable logic device, or CPLD, is a programmable-logic semiconductor that combines interconnected macrocells and user I/O into a relatively simple architecture. Within the broader hierarchy, a CPLD is a programmable-logic device, a semiconductor, and an alternative to a field-programmable gate array. Its deterministic timing and electrically erasable configuration memory make it suitable for control logic, interface adaptation, decoding, and state-machine implementations.
The XC9536XL provides 36 macrocells, 36 user I/O pins, 800 usable gates, and a maximum propagation delay of 5 ns. It supports in-system programming with at least 10,000 program or erase cycles. The commercial-grade ordering option covers 0°C to 70°C ambient temperature, while its surface-mount 64-pin TQFP package supports conventional PCB assembly and inspection processes.
Internally, the XC9500XL architecture uses function blocks and I/O blocks to implement programmable Boolean and sequential logic. The device combines a compact 36-macrocell density with in-system programmability and enhanced pin-locking capability, helping preserve pin assignments when designs migrate within supported family options. Its listed 0.35 µm CMOS process represents a mature implementation suited to established CPLD toolchains and stable production platforms.
Typical uses include bus-interface decoding, industrial control logic, data-routing and multiplexing, legacy peripheral glue, and compact control systems where a small gate count and short specified propagation delay are more useful than a large FPGA fabric. The XC9536XL family is especially relevant to designs already using the XC9500 architecture, where preserving software, board layout, and programming methodology can reduce migration effort.
PCB implementation should preserve the exact 64-pin footprint, supply decoupling, programming access, and I/O signal-integrity practices defined for the device. Confirm the I/O standard, supply sequencing, and termination requirements in the AMD XC9536XL DS058 document before releasing a new layout. Because exact pin names and package dimensions are not reproduced on this page, use the manufacturer pin table and package drawings for physical implementation.
This page combines the verified device characteristics, package details, price reference, family alternatives, application guidance, and practical design considerations needed to evaluate the XC9536XL-5VQG64C for an existing programmable-logic design.
ドロップイン代替品: XC9536XL-5VQG64C — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XC9536XL-5VQG64C (同一形状・フットプリント) — 相違点: Package, Number of Macrocells, Usable Gates, Device Type, Lead-Free Status.
XC9536XL-5VQ64C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC9536XL-10VQG64I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XC9536XL-7VQG64C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC9536XL-10VQG64C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
XC9572XL-5VQG64C
✅ ドロップイン価格はお問い合わせください
データシートを見る →XC9536XL-5VQG64C 最大定格&電気的特性
| Product Type | Complex programmable logic device |
| Programmable Type | In-system programmable |
| Program or Erase Cycle Life | At least 10,000 cycles |
| Macrocell Count | 36 macrocells |
| User I/O Count | 36 I/Os |
| Usable Gate Count | 800 gates |
| Maximum Propagation Delay | 5.0 ns |
| 電源電圧 | 3.3 V |
| Maximum Internal Frequency | 100 MHz |
| Process Technology | 0.35 µm CMOS |
| パッケージ | 64-pin TQFP |
| Package Code | TFQFP |
| Terminal Count | 64 terminals |
| 実装タイプ | Surface mount |
| Operating Ambient Temperature | 0°C to 70°C |
| Temperature Grade | Commercial |
| AEC-Q100 Qualification | Not applicable |
XC9536XL-5VQG64C tfqfp ピン配置ガイド
XC9536XL-5VQG64C (tfqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XC9536XL-5VQG64C.
詳細は データシート をご参照ください。
主な用途
XC9536XL-5VQG64C の用途: 6 件s: Industrial Control and Automation Logic, Legacy Peripheral Interface Control, Data Routing and Multiplexing, Power and Battery Management Sequencer, Communication Interface Adaptation, Educational and FPGA Prototyping.
Industrial Control and Automation Logic
The XC9536XL-5VQG64C fits compact industrial control tasks that combine state-machine logic, interlocks, signal decoding, and discrete I/O conditioning. Its 36 macrocells and 36 user I/Os provide enough programmable resources for multiple control paths without using a larger FPGA, while the 5.0 ns maximum propagation delay supports timing designs around a 100 MHz class device. The commercial 0°C to 70°C ordering range is appropriate for temperature-controlled cabinets and factory equipment that remain within that envelope. Designers should partition functions among the available macrocells, reserve pins for configuration and JTAG, and complete worst-case timing checks rather than relying only on average logic depth.
おすすめ
Legacy Peripheral Interface Control
The XC9536XL-5VQG64C is useful for adapting legacy peripherals through address decoding, interrupt control, data latching, and command translation. Thirty-six user I/Os permit multiple interface signals to be consolidated, while the 800 usable gates and 36 macrocells support moderate Boolean and sequential logic. A 5.0 ns maximum propagation delay can support deterministic control paths in applications previously built around small masked-programmable or reprogrammable logic. The design should define each I/O's electrical standard and loading in the AMD DS058 package and pin documentation, and should verify that the selected board revision exposes every required configuration and programming signal.
おすすめ
Data Routing and Multiplexing
The XC9536XL-5VQG64C can implement compact data selectors, bus arbiters, address translators, and routing logic where a small fixed architecture is preferable to a large programmable-logic array. Its 36 macrocells allow multiple control paths and registered stages to coexist, and the 36 user I/Os are sufficient for moderate-width interfaces. The 5 ns speed grade provides a defined propagation-delay ceiling for timing analysis, although actual path delay depends on logic implementation and I/O loading. Engineers should use the manufacturer's timing models and device constraints to check every path, particularly register-to-register transfers and outputs that operate at the 100 MHz internal-frequency class indicated for this family.
おすすめ
Power and Battery Management Sequencer
The XC9536XL-5VQG64C can coordinate power-up sequences, monitor enable signals, generate control pulses, and supervise battery or supply status in a compact embedded control design. The 36 I/Os support external supervisory devices, load switches, and status inputs, while the programmable macrocells implement sequencing and fault logic. A 5.0 ns maximum propagation delay helps keep control events tightly defined relative to the intended power-management sequence. The device itself is a programmable-logic component rather than a voltage regulator, so rail voltage, current capacity, and power-loss behavior must be handled by dedicated power components. Sequencing margins and fault responses should be verified across temperature and all programmed operating states.
おすすめ
Communication Interface Adaptation
The XC9536XL-5VQG64C is appropriate for protocol adapters, command translators, and asynchronous interface glue where a compact CPLD offers more flexibility than fixed logic. Thirty-six I/Os can accommodate multiple chip-select, clock, data, and handshake signals, while the 36 macrocells support framing logic, parity, counters, and state machines. The 5 ns grade can serve moderately fast control paths, but high-speed source-synchronous interfaces require careful pin assignment, signal-integrity analysis, and timing review. Use the manufacturer pin table to maintain compatible JTAG and configuration access, and validate output timing against the external device rather than assuming the internal 100 MHz frequency applies to every I/O path.
おすすめ
Educational and FPGA Prototyping
The XC9536XL-5VQG64C is useful for compact digital-logic laboratories, retrofits, and prototypes that need reprogrammability without a large FPGA. Students can implement counters, finite-state machines, memory-style control tables, and bus-interaction exercises across 36 macrocells and 36 user I/Os. The 5.0 ns maximum propagation delay makes logic timing measurable with standard laboratory instruments, while in-system programmability permits iterative design changes without replacing the device. The 64-pin TQFP footprint is manageable for manual or machine assembly, but access to the device's established programming toolchain and configuration hardware is important. Legacy projects should also verify tool operating-system support and cable compatibility before committing to a new build.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XC9536XL-5VQG64C — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XC9536XL-5VQ64C | XC9536XL-10VQG64I | XC9536XL-7VQG64C | XC9536XL-10VQG64C | XC9572XL-5VQG64C |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP | 64-pin TQFP |
| Maximum Propagation Delay | 5.0 ns | 5.0 ns | 10 ns | 7 ns | 10 ns | 5.0 ns |
| Device Family | XC9536XL | XC9536XL | XC9536XL | XC9536XL | XC9536XL | XC9572XL |
| Programmable Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
主な差別化要因
- Faster specified propagation delay than the slower XC9536XL alternatives (vs XC9536XL-7VQG64C)
- Faster specified propagation delay than the 10 ns family options (vs XC9536XL-10VQG64I)
- Exact 5 ns speed grade with the matching 64-pin TQFP footprint (vs XC9536XL-5VQ64C)
- Lower logic density can simplify constrained designs compared with the higher-density family (vs XC9572XL-5VQG64C)
設計ノート
Assign the board layout from the exact 64-pin TQFP drawing in AMD DS058 rather than from a generic 64-pin symbol. Keep JTAG and in-system programming access available, preserve all supply and ground connections, and place decoupling capacitors adjacent to the relevant pins. Because the device has 36 user I/Os rather than 64 user I/Os, verify that fixed-function terminals have not been assigned as general-purpose signals in the schematic or constraint file.
Treat the 5.0 ns figure as a maximum propagation-delay specification, not a guaranteed delay for every path. Analyze register-to-register, input-to-register, and output paths under the intended 3.3 V conditions and board loading. For external interfaces, check setup and hold requirements at the receiving device, maintain controlled clock routing, and avoid relying on the 100 MHz family figure as proof that every I/O can operate at that rate.
Do not assume that matching package names guarantee interchangeable status or pin behavior. The QG, Q, and I ordering suffixes represent different ordering attributes, and a speed-grade change from 5 ns to 7 ns or 10 ns directly changes timing. Before substitution, compare the manufacturer ordering guide, verify configuration compatibility and pin locking, rerun timing analysis, and confirm that the replacement is acceptable for the required temperature and environmental conditions.
Implement the supply network with short, low-inductance connections and place the required bypass capacitors close to the device. Follow the DS058 supply recommendations and verify rail tolerance, startup behavior, and current demand in the complete design. The 3.3 V designation identifies the operating supply for this device; it does not authorize substituting the 5 ns speed-grade suffix with an assumption of 5 V operation.
コンプライアンス情報
The exact target MPN's RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from its current manufacturer product record. A non-QG family listing states RoHS non-compliance and contains lead, but that status was not transferred to the exact QG target ordering.