XMC4200F64F256BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon
部品番号: XMC4200F64F256BAXQMA1 ✓ 生産中XMC4200F64F256BAXQMA1 概要
An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Within the product hierarchy, a microcontroller integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, interrupt control, and communication interfaces on one semiconductor device. The XMC4200 therefore serves as a complete embedded platform rather than a standalone processor, making it suitable for industrial equipment, sensors, actuator controllers, and connected automation systems.
The principal verified specifications include an 80 MHz maximum clock, 256 KB flash organized as 256K x 8, and 40 KB SRAM. The program-memory capacity is suitable for moderate embedded applications, while the SRAM supports working state, data acquisition, communication buffers, and peripheral control. Availability through DigiKey and Mouser indicates that the exact ordering code is commercially obtainable, although distributor stock remains subject to change.
Technical differentiation within the XMC4000 family is determined by the selected die and ordering designation. The manufacturer identifies the XMC4200-F64F256-BA as an industrial ARM Cortex-M4 microcontroller with 256 KB flash, 40 KB SRAM, and operation up to 80 MHz. The AXQMA1 ordering suffix further distinguishes the supplied package and delivery configuration from other XMC4200 variants. Firmware developers should therefore treat the ordering code, not only the abbreviated XMC4200 family name, as the controlling device identity during PCB and BOM qualification.
Typical uses include distributed industrial control, machine-control modules, sensor and actuator interfaces, communications equipment, and embedded automation nodes. An 80 MHz Cortex-M4 core can execute control logic concurrently with interrupt-driven peripheral service, while 256 KB of flash supports application firmware and 40 KB of SRAM can accommodate protocol stacks and runtime data. Exact peripheral availability, pin multiplexing, and electrical limits must be confirmed in the manufacturer data sheet before assigning signals to the 64-pin package.
PCB design should preserve the exposed-pad land pattern specified for the LQFP-64 package, connect the exposed pad to the appropriate ground plane, and route high-speed or sensitive signals away from noisy switching nodes. Firmware bring-up should include appropriate clock, reset, and peripheral initialization procedures from the data sheet. Because the supplied search extracts do not provide the complete pin table, pin names, absolute maximum ratings, or detailed timing characteristics, those values should not be inferred from the family name.
This product record combines manufacturer and distributor information, package and memory details, commercially sourced ordering information, and an explicit assessment of drop-in alternatives. It also distinguishes verified pin-compatible same-brand options from broader functional equivalents that cannot replace this device without PCB redesign, firmware adaptation, and qualification.
ドロップイン代替品: XMC4200F64F256BAXQMA1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
XMC4200F64K256BAXQSA1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XMC4300F64F256BAXQMA1
✅ ドロップイン📋 参考代替品（カタログ未掲載）
XMC4200F64F256BAXQMA1 最大定格＆電気的特性
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Series | XMC4200 / XMC4000 family |
| Processor Core | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz |
| Flash Memory | 256 KB (256K x 8) |
| Static RAM | 40 KB |
| 電源電圧 | 3.3 V |
| Architecture | 32-bit RISC |
| Application Classification | Industrial microcontroller |
| パッケージ | 64-pin LQFP with exposed pad |
| Package Designation | PG-LQFP-64-19 |
| 実装タイプ | Surface mount |
| Manufacturer Ordering Code | XMC4200-F64F256-BA |
| Distributor Packaging | Tray |
| Data Sheet Revision | V1.4, 2018-09 |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
XMC4200F64F256BAXQMA1 pg-lqfp-64-19 ピン配置ガイド
XMC4200F64F256BAXQMA1 (pg-lqfp-64-19 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XMC4200F64F256BAXQMA1.
詳細は データシート をご参照ください。
主な用途
XMC4200F64F256BAXQMA1 の用途: 6 件s: Industrial Machine Control, Sensor Acquisition and Conditioning, Actuator and Motor Interface Control, Industrial Communications Gateway, Connected Automation Module, Robotics and Equipment Controller.
Industrial Machine Control
The XMC4200F64F256BAXQMA1 fits centralized machine-control logic because its 80 MHz ARM Cortex-M4 core provides deterministic processing for control algorithms, state machines, and interrupt-driven peripheral service. The 256 KB of flash provides space for application firmware, while 40 KB of SRAM can hold working variables, acquisition buffers, and communications state. It is placed on an industrial controller PCB and configured with the clock, communications, and I/O peripherals assigned in the manufacturer data sheet. Compared with a lower-frequency MCU, the 80 MHz core offers more processing headroom, but final suitability depends on the control loop deadline, peripheral map, and environmental limits.
おすすめ
Sensor Acquisition and Conditioning
The XMC4200F64F256BAXQMA1 is appropriate for sensor nodes that combine sampling control, digital filtering, and local communication. Its 80 MHz Cortex-M4 processor can service timing-sensitive acquisition routines, while 40 KB of SRAM can buffer measurement data before transmission. The 256 KB flash capacity allows calibration tables, configuration, and protocol logic to reside locally without external program memory. In implementation, the MCU coordinates sensor interfaces and diagnostic functions while the complete pin assignments and analog peripheral functions are selected from the 64-pin package. The principal benefit is integrated memory and processing, while designers must budget SRAM carefully if traces, filtering state, and network buffers overlap.
おすすめ
Actuator and Motor Interface Control
The XMC4200F64F256BAXQMA1 can serve as the supervisory controller in an actuator or motor-interface module because its 80 MHz Cortex-M4 core can execute control loops alongside communications and fault handling. Its 40 KB SRAM supports control parameters and command queues, while 256 KB flash accommodates firmware and calibration data. The MCU can coordinate timers, digital interfaces, and sensor feedback when those functions are available in the selected device variant. Compared with a generic low-end microcontroller, the higher clock rate provides more scheduling headroom for closed-loop tasks. Engineers must verify PWM, capture, position-interface, and analog-function availability in the manufacturer documentation before assigning the required motor-control resources.
おすすめ
Industrial Communications Gateway
The XMC4200F64F256BAXQMA1 is suitable for a local industrial communications node because it combines an 80 MHz 32-bit processor, 256 KB program flash, and 40 KB SRAM in one industrial MCU. The processor can manage protocol processing and supervisory logic, while SRAM accommodates received frames and transient protocol state. A gateway implementation can use the device alongside external transceivers or interface converters, with the MCU managing framing, status, configuration, and diagnostics. The advantage over a simple 8-bit controller is additional processing capacity and a 32-bit ecosystem. Designers should still match the selected XMC4200 ordering code to the required serial interfaces and verify protocol timing against the manufacturer data sheet.
おすすめ
Connected Automation Module
The XMC4200F64F256BAXQMA1 can anchor a connected automation module that performs local control while exchanging status and commands with a higher-level controller. Its 256 KB flash stores application code, configuration, and protocol components, and its 40 KB SRAM provides working memory for message queues and control tasks. Running at up to 80 MHz gives the device headroom for time-critical I/O servicing alongside communication processing. In a typical design, the MCU handles local inputs and outputs, maintains operating state, and reports events through an external network interface. The tradeoff is that RAM can become the limiting resource in buffered or multi-protocol designs, so the final partition should be checked against the firmware architecture.
おすすめ
Robotics and Equipment Controller
The XMC4200F64F256BAXQMA1 is suitable for robotics and equipment modules requiring more control throughput than a small 8-bit MCU. Its 80 MHz ARM Cortex-M4 core can combine motion-sequence logic, communications, and safety monitoring, while 256 KB flash holds application firmware and 40 KB SRAM supports immediate control state. The device is mounted in an LQFP-64 exposed-pad design, allowing a PCB designer to preserve thermal copper around the exposed pad and separate sensitive signals from power-conversion stages. Compared with larger application processors, it offers a simpler embedded control path, but it does not provide an operating system unless one is explicitly included. Exact timer and interface resources must be confirmed for each motor or robot architecture.
おすすめ
エンジニアリング参考データ: XMC4200F64F256BAXQMA1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XMC4200F64K256BAXQSA1 | XMC4300F64F256BAXQMA1 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 64-pin LQFP with exposed pad | 64-pin LQFP with exposed pad | 64-pin LQFP with exposed pad |
| Processor Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 80 MHz | 80 MHz | 80 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB |
| Additional Features | Industrial XMC4200 device | Same package and flash size; possible RAM-configuration or temperature-range difference | Higher-performance variant with additional peripherals |
主な差別化要因
- Verified industrial MCU configuration （vs XMC4300F64F256BAXQMA1)
- Exact 3.3 V distributor specification （vs XMC4200F64K256BAXQSA1)
- Direct XMC4200 family continuity （vs XMC4200F64K256BAXQSA1)
設計ノート
The XMC4200F64F256BAXQMA1 uses a 64-pin LQFP with an exposed pad. Preserve the manufacturer land pattern and provide a low-impedance thermal path from the exposed pad into the ground plane. Use multiple vias as specified by the package drawing and keep heat-producing regulators or power stages away from the pad. The supplied excerpts do not provide junction-temperature or package thermal-resistance ratings, so final thermal calculations must use the values in the Infineon data sheet.
Treat the full ordering code XMC4200F64F256BAXQMA1 as a controlled BOM item because XMC4200 variants can differ in flash, SRAM, qualification, temperature range, and ordering suffix. Verify the PG-LQFP-64-19 footprint, exposed-pad dimensions, pin-one orientation, and land pattern against the manufacturer package drawing. Do not substitute the 64-pin symbol without checking its pin numbering and exposed-pad connection.
Separate clocks, communication lines, and sensitive sensor inputs from switching power-conversion paths. Keep the MCU supply path short and follow the decoupling network specified in the Infineon application and hardware documentation. Because the supplied extracts do not provide individual pin functions or external-component values, validate each signal against the complete XMC4100/XMC4200 Data Sheet V1.4 2018-09 before schematic release.
Do not infer that every Cortex-M4 part is a drop-in replacement. The cross-reference results identify STM32, LPC, and TMS320 devices only as category or functional alternatives, and their packages and peripheral mappings are not established as compatible with PG-LQFP-64-19. Likewise, verify the ordering differences between XMC4200F64K256BAXQSA1 and XMC4300F64F256BAXQMA1 before changing a released design. Firmware startup, linker memory placement, peripheral configuration, and qualification all require review.
コンプライアンス情報
The supplied search results identify the device as an industrial microcontroller but do not provide extractable RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is marked not applicable because this is an industrial MCU ordering option rather than an automotive-qualified suffix in the verified data.
