XMC4400F100K512ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
部品番号: XMC4400F100K512ABXQSA1 ✓ 生産中XMC4400F100K512ABXQSA1 概要
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication interfaces, timers, analog peripherals, and general-purpose I/O into one device. The XMC4000 series combines an Arm Cortex-M4 processor core with industrial communications and real-time control resources, placing it within the hierarchy of embedded MCU, 32-bit microcontroller, and programmable semiconductor. This integration reduces component count while providing deterministic control for connected industrial equipment.
The most prominent device characteristics are a 120 MHz operating frequency, 512 KB of flash, a 32-bit Arm Cortex-M4 core, and integrated 10/100 Ethernet support. The suffix-selected PG-LQFP-100-11 package provides 100 leads and an exposed thermal pad for board-level heat spreading. A 3.3 V operating supply is identified for this ordering option, while detailed RAM capacity, flash organization beyond the stated 512 KB, temperature limits, and peripheral assignments require confirmation from the manufacturer datasheet and pin description table.
The Arm Cortex-M4 architecture supports efficient exception-based real-time operation through its interrupt system and integrated DSP extensions. XMC4000-family resources are suited to mixing communication protocols with deterministic control loops. The Ethernet MAC allows the MCU to participate directly in 10/100 Ethernet systems, reducing the need for a separate network controller when the selected board design includes the required magnetics, PHY, routing, and isolation or surge-protection implementation.
Typical applications include industrial Ethernet controllers, programmable automation equipment, motor-control systems, industrial communications gateways, sensor-hub platforms, and connected test equipment. The combination of 120 MHz processing performance, 512 KB flash, and Ethernet integration is especially useful when a controller must combine real-time peripheral handling with network connectivity while retaining a compact 100-pin surface-mount footprint.
PCB implementation should follow the package-specific land pattern, exposed-pad connection, decoupling, and thermal recommendations in the Infineon datasheet. Designers must also assign every multiplexed pin according to the manufacturer pin-description table and validate the external Ethernet interface, clock configuration, reset behavior, and peripheral clock requirements for the complete system.
This product page combines the XMC4400F100K512ABXQSA1 ordering information with same-family alternatives, parameter-by-package comparisons, application guidance, and practical implementation notes. It is intended to help engineers determine whether the device meets the processor, memory, package, Ethernet, and lifecycle requirements of a new industrial embedded design.
ドロップイン代替品: XMC4400F100K512ABXQSA1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XMC4400F100K512ABXQSA1 (同一形状・フットプリント) — 相違点: Package, Product Type, Architecture, Ethernet Support, Flash Memory.
XMC4400F100K512BAXUMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100K512BAXQMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100F512BAXUMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100F512BAXQMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100K256BAXUMA2
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100K512ABXQSA1 最大定格&電気的特性
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| Architecture | ARM 32-bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB (512K x 8) |
| Ethernet Support | 10/100 Ethernet MAC |
| 電源電圧 | 3.3 V |
| パッケージ | PG-LQFP-100-11 |
| ピン数 | 100 pins |
| Exposed Pad | Present |
| 実装タイプ | Surface mount |
| Product Series | XMC4000 |
| Application Class | Industrial |
| Core Count | Single core |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
XMC4400F100K512ABXQSA1 pg-lqfp-100-11 ピン配置ガイド
XMC4400F100K512ABXQSA1 (pg-lqfp-100-11 パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XMC4400F100K512ABXQSA1.
詳細は データシート をご参照ください。
主な用途
XMC4400F100K512ABXQSA1 の用途: 6 件s: Industrial Ethernet Controller, Programmable Automation Controller, Connected Motor-Control System, Industrial Communications Gateway, Industrial Sensor Hub, Connected Test and Measurement Equipment.
Industrial Ethernet Controller
The XMC4400F100K512ABXQSA1 fits industrial Ethernet controllers because its 120 MHz Arm Cortex-M4 core can execute network stacks while handling deterministic control tasks. The integrated 10/100 Ethernet MAC reduces controller complexity, and 512 KB flash provides room for protocol code, diagnostics, and configuration. Implement the MCU beside an appropriate PHY, isolation barrier, magnetics, and surge protection, then validate timing and EMC requirements for the installed environment. The 3.3 V device and LQFP-100 package support conventional industrial PCB architectures, although the exposed pad requires a proper thermal and copper-plane design.
おすすめ
Programmable Automation Controller
The XMC4400F100K512ABXQSA1 is appropriate for programmable automation controllers that combine sequencing, communication, and machine I/O in one processor. Its 120 MHz Cortex-M4 performance supports responsive state-machine execution, while 512 KB flash accommodates application logic, fieldbus or Ethernet code, and update functions. The 100-pin LQFP-100 package provides a defined pin budget for digital control, communications, and analog functions. Before layout release, map every signal through the manufacturer pin-description table, preserve the exposed-pad thermal path, and reserve test points for boot, reset, clock, and production programming.
おすすめ
Connected Motor-Control System
The XMC4400F100K512ABXQSA1 can serve as the supervisory controller in a connected motor-control system. The 120 MHz Cortex-M4 core provides processing capacity for command handling, fault logic, communications, and control-loop coordination, while the 10/100 Ethernet interface supports supervisory monitoring. The device does not eliminate the need for external power stages, gate drivers, current sensing, and protection; those functions depend on the motor voltage and current. Confirm timer resources, analog inputs, PWM routing, and fault-response latency against the system requirements before selecting the MCU.
おすすめ
Industrial Communications Gateway
The XMC4400F100K512ABXQSA1 is well suited to an industrial communications gateway that must bridge local control functions with an Ethernet network. Its 512 KB flash supports gateway firmware, protocol conversion, configuration, and diagnostic logic, while the 120 MHz core handles concurrent message processing and service tasks. The 3.3 V supply requirement should be reconciled with the gateway power tree so the MCU remains within its electrical limits during Ethernet transmit activity. Use the exact package land pattern, provide local decoupling, route sensitive interfaces away from switching nodes, and validate network isolation and surge requirements for the installation class.
おすすめ
Industrial Sensor Hub
The XMC4400F100K512ABXQSA0 can be used as the base of an industrial sensor hub when local acquisition, filtering, diagnostics, and network reporting must coexist. The 120 MHz Cortex-M4 core has ample nominal performance for sensor orchestration and protocol processing, while 512 KB flash can hold firmware and lookup data. A sensor hub still needs application-specific analog front ends or external converters where the MCU's own ADC does not meet signal-range, isolation, or accuracy requirements. Validate pin multiplexing, ADC performance, calibration storage, sensor power sequencing, and Ethernet physical-layer implementation against the actual measurement architecture.
おすすめ
Connected Test and Measurement Equipment
The XMC4400F100K512ABXQSA1 supports connected industrial test equipment that must coordinate measurements, run control sequences, and report results over Ethernet. The 120 MHz Arm Cortex-M4 core can manage instrument-control logic, while 512 KB flash accommodates embedded sequences, configuration data, and firmware updates. Instrument designs may require additional precision analog components, isolation, calibration, and custom interfaces that are not part of the MCU. Confirm the available timer, serial, USB, and digital I/O resources in the Infineon pin table, and implement watchdog, brownout, and safe-state behavior for unattended equipment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XMC4400F100K512ABXQSA1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XMC4400F100K512BAXUMA1 | XMC4400F100K512BAXQMA1 | XMC4400F100F512BAXUMA1 | XMC4400F100F512BAXQMA1 | XMC4400F100K256BAXUMA2 |
|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-LQFP-100-11 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 | LQFP-100 |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Pin Count | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins | 100 pins |
主な差別化要因
- Largest identified program-memory option among the reviewed XMC4400 candidates (vs XMC4400F100K256BAXUMA2)
- Same-family 120 MHz processing performance (vs XMC4400F100K512BAXUMA1)
- Integrated 10/100 Ethernet for connected industrial designs (vs XMC4400F100K256BAXUMA2)
- 100-pin surface-mount integration with exposed-pad thermal design (vs XMC4400F100F512BAXUMA1)
設計ノート
Treat the exposed pad as a mandatory thermal and electrical construction feature of the PG-LQFP-100-11 package. Follow the manufacturer's land pattern and exposed-pad geometry, connect the pad to the appropriate ground reference, and minimize thermal resistance through the PCB stack-up and copper area. Do not rely on the small top-surface area of a 100-pin LQFP for sustained power dissipation. Validate the final junction temperature under maximum clock activity, Ethernet transmit load, ambient temperature, and the worst expected power-supply condition.
Place all decoupling capacitors close to the corresponding supply and ground pins, with short, low-inductance paths and an unobstructed ground return. Apply the manufacturer recommendations for bulk capacitance, decoupling value, and placement. Preserve the package's exposed-pad clearance and via arrangement. For a mixed-signal or Ethernet controller, partition the PCB so switching regulators, high-current Ethernet components, and isolation barriers do not inject noise into precision analog or communication paths.
Do not infer functional equivalence from a shared package and family name alone. Multiplexing, exposed-pad implementation, clocking, qualification, temperature grade, and ordering suffixes can affect the exact device. Before replacing XMC4400F100K512ABXQSA1 with XMC4400F100K512BAXUMA1, XMC4400F100K512BAXQMA1, XMC4400F100F512BAXUMA1, XMC4400F100F512BAXQMA1, or XMC4400F100K256BAXUMA2, compare the manufacturer ordering table, exact pin table, electrical limits, peripheral configuration, and software-support requirements.
Use the manufacturer package drawing to establish the 100-lead numbering and exposed-pad orientation before assigning ports. Review alternate-function selections for every multiplexed signal because changing one pin function can move a peripheral onto another I/O resource. Keep the reset and clock nets short, provide test access for programming and debug, and isolate analog inputs from switching-node routing. Where Ethernet is used, follow the reference design's PHY, magnetics, isolation, and controlled-impedance layout guidance.
コンプライアンス情報
The device is identified as an industrial XMC4000 microcontroller. No RoHS, REACH, halogen-free, or conflict-minerals declaration was confirmed for this ordering code.