XMC4402F100F256BAXQMA1 - 120MHz Cortex-M4 256KB Flash LQFP-100 | Infineon
部品番号: XMC4402F100F256BAXQMA1 ✓ 生産中XMC4402F100F256BAXQMA1 概要
The XMC4000 family belongs to the industrial microcontroller segment, combining an Arm Cortex-M4 processor with Infineon peripherals designed for real-time control and connected automation. The operating voltage range is 3.13 V to 3.63 V, and the device supports USB 2.0 full-speed on-the-go. Its 120 MHz Cortex-M4 core is suitable for motor-control, industrial communication, measurement, and embedded networking applications.
Key features include a high-resolution PWM unit with 150 ps resolution, a 120 MHz CPU frequency, 256 KB of flash, and dedicated DMA channels for USB and Ethernet. These resources reduce CPU intervention in data-transfer-intensive designs and support deterministic control loops where predictable timing is more important than maximum general-purpose performance. The Ethernet MAC enables connected industrial equipment using standard network infrastructure.
The XMC4402F100F256BAXQMA1 is supplied in a 100-pin LQFP package with an exposed-pad variant indicated by the manufacturer ordering information. The package provides a conventional leaded footprint for industrial control boards and simplifies assembly where fine-pitch BGA packages are undesirable. The device is specified for industrial applications and is identified as part of Infineon's XMC4000 microcontroller portfolio.
Typical applications include industrial Ethernet controllers, servo and motor-control systems, PLC peripherals, factory automation nodes, sensor gateways, and USB-connected measurement equipment. Designers should confirm startup, clock, and memory configuration against the XMC4400 family documentation and use the manufacturer's pin-description tables when assigning PCB nets.
This page consolidates the manufacturer product listing, distributor technical summaries, family-level alternatives, and practical design guidance. It also highlights where different XMC4000 derivatives differ in flash capacity, temperature-grade ordering codes, or package-related ordering details so engineers can shortlist the correct device before schematic capture.
ドロップイン代替品: XMC4402F100F256BAXQMA1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XMC4402F100F256BAXQMA1 (同一形状・フットプリント) — 相違点: Product Type, Package, Flash Memory, Ethernet Support, Architecture.
XMC4402-F100F256-BA
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XMC4402-F100K256-BA
✅ ドロップイン📋 参考代替品(カタログ未掲載)
XMC4400F100K256BAXUMA2
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100K512BAXUMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100K512BAXQMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100F512BAXUMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4400F100F512BAXQMA1
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →XMC4402F100F256BAXQMA1 最大定格&電気的特性
| Product Type | Industrial ARM Cortex-M4 microcontroller |
| Series | XMC4000 |
| Core | ARM Cortex-M4, 32-bit |
| CPU Frequency | 120 MHz |
| Flash Memory | 256 KB (256K x 8) |
| Supply Voltage Range | 3.13 V to 3.63 V |
| Ethernet | Ethernet MAC |
| USB Interface | USB 2.0 full-speed on-the-go |
| DMA Channels | 8-channel DMA plus dedicated USB and Ethernet DMAs |
| DSP Support | Single-cycle DSP multiply-accumulate |
| FPU | Single-precision floating-point unit |
| PWM Resolution | 150 ps |
| パッケージ | PG-LQFP-100 |
| ピン数 | 100 pins |
| Package Type | LQFP with exposed pad |
| 実装タイプ | Surface Mount |
| RoHS | Not stated in the product listings |
| REACH | Not stated in the product listings |
| AEC-Q100 Qualification | Not applicable; industrial microcontroller |
| Lead-Free Status | Not stated in the product listings |
XMC4402F100F256BAXQMA1 lqfp with exposed pad ピン配置ガイド
XMC4402F100F256BAXQMA1 (lqfp with exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XMC4402F100F256BAXQMA1.
詳細は データシート をご参照ください。
主な用途
XMC4402F100F256BAXQMA1 の用途: 6 件s: Industrial Ethernet Control Nodes, Servo and Motor-Control Electronics, USB-Connected Measurement Equipment, Factory Automation and PLC Peripherals, Sensor Gateways and IoT Edge Controllers, Power Conversion and Digital Control.
Industrial Ethernet Control Nodes
The XMC4402F100F256BAXQMA1 fits connected industrial controllers that require real-time execution alongside network traffic handling. Its 120 MHz ARM Cortex-M4 core provides deterministic control processing, while the Ethernet MAC and dedicated Ethernet DMA reduce the CPU burden of packet movement. The 256 KB flash budget is suitable for protocol stacks and control firmware that do not exceed the device capacity. Engineers should reserve memory for a bootloader and diagnostic logging, and confirm transceiver, PHY, and magnetics requirements against the selected board-level Ethernet interface.
おすすめ
Servo and Motor-Control Electronics
The XMC4402F100F256BAXQMA1 is appropriate for compact servo drives and motor-control modules where deterministic pulse generation and fast control-loop execution matter. The XMC4000 family's high-resolution PWM unit provides 150 ps timing resolution, and the 120 MHz Cortex-M4 core supports DSP-oriented control algorithms with a floating-point unit. Dedicated DMA resources also help separate control traffic from data movement. The 256 KB flash limit requires disciplined code sizing, particularly when adding fieldbus stacks, logging, and safety monitoring, so measure the final linked image before release.
おすすめ
USB-Connected Measurement Equipment
The XMC4402F100F256BAXQMA1 works well for USB-connected test and measurement instruments that combine data acquisition, local processing, and a host interface. Its USB 2.0 full-speed on-the-go capability supports direct host connectivity, while dedicated USB DMA reduces interrupt overhead during data transfer. The 120 MHz Cortex-M4 core can run sampling logic and filtering, and the 256 KB flash provides space for a control application and USB firmware. Designers should budget RAM separately and use the family's pin table to confirm USB routing, clock sources, and analog-capable pins.
おすすめ
Factory Automation and PLC Peripherals
The XMC4402F100F256BAXQMA1 can serve as the controller in PLC I/O modules, distributed automation endpoints, and factory-floor sensor gateways. Its 120 MHz Cortex-M4 performance supports protocol handling and local logic, while the Ethernet MAC supports standard industrial network connectivity. Eight-channel DMA plus dedicated USB and Ethernet DMA improve responsiveness by offloading transfers. The 256 KB flash is suitable for focused gateway firmware, although large protocol stacks and extensive logging may favor a 512 KB XMC4000 derivative. Confirm operating-temperature requirements for the installation environment.
おすすめ
Sensor Gateways and IoT Edge Controllers
The XMC4402F100F256BAXQMA1 is a strong fit for compact edge controllers that gather sensor data, perform local filtering, and forward results over Ethernet. The Cortex-M4 DSP instructions and floating-point unit help process sampled data without moving every operation through a separate DSP, and the dedicated DMA channels improve data-path efficiency. The Ethernet MAC enables network uplink without an additional controller. For deployments requiring larger local buffering or dual image storage, select a 512 KB XMC4000 option and verify the 3.13 V to 3.63 V operating range against the board supply.
おすすめ
Power Conversion and Digital Control
The XMC4402F100F256BAXQMA1 can supervise power-conversion subsystems that require fast control computation and deterministic timing. The 120 MHz Cortex-M4 core, DSP multiply-accumulate, floating-point unit, and 150 ps PWM resolution support high-resolution modulation and control-loop execution. Dedicated DMA helps move measurement data without excessive CPU intervention. The 256 KB flash footprint is adequate for compact supervisory firmware, but safety diagnostics and complex algorithms can quickly increase code size. Validate the control-loop timing, ADC resources, and fault-response architecture against the XMC4000 family documentation.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XMC4402F100F256BAXQMA1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XMC4402-F100F256-BA | XMC4402-F100K256-BA | XMC4400F100K256BAXUMA2 | XMC4400F100K512BAXQMA1 |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100 | PG-LQFP-100 family option | PG-LQFP-100 family option | PG-LQFP-100 family option | PG-LQFP-100 family option |
| CPU Core | 32-bit ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB | 512 KB |
| Ethernet | Ethernet MAC | Ethernet MAC | Ethernet MAC | Ethernet | Ethernet |
| Supply Voltage Range | 3.13 V to 3.63 V | 3.13 V to 3.63 V | 3.13 V to 3.63 V | 3.13 V to 3.63 V | 3.13 V to 3.63 V |
| PWM Resolution | 150 ps | 150 ps family value | 150 ps family value | 150 ps family value | 150 ps family value |
主な差別化要因
- Memory-matched XMC4402 industrial option (vs XMC4400F100K512BAXQMA1)
- Exact manufacturer family association (vs XMC4402-F100K256-BA)
- Integrated real-time control resources (vs XMC4400F100K256BAXUMA2)
設計ノート
Design the supply around the stated 3.13 V to 3.63 V operating range and verify the selected regulator tolerance at every load and temperature corner. Place local bypass capacitors close to the device power pins, with the actual values and topology taken from the family reference circuit. Separate analog, digital, and high-current output rails to prevent switching or motor-return currents from shifting the 3.3 V reference used by the MCU.
Use the manufacturer's pin-description table to assign every LQFP-100 net, including the exposed-pad connection, debug interface, clock sources, and analog-capable pins. Keep the 100-pin footprint mechanical and thermal design compliant with the package drawing; incorrect pad geometry or exposed-pad treatment can prevent reliable assembly. Confirm the exact ordering variant before releasing the schematic because suffix differences may carry commercial or qualification attributes.
Route the 120 MHz clock, Ethernet differential pairs, and USB interface with continuous reference planes and controlled return paths. Ethernet PHY or magnetics placement and USB connector geometry are board-level choices that materially affect signal integrity, so follow the manufacturer's evaluation and interface guidance rather than improvising long traces. Enable appropriate input filtering and clock-slew control after checking the family configuration guidance.
Do not assume that every XMC4000 with a 100-pin package is firmware-compatible. Check the 256 KB flash limit, peripheral mix, pin multiplexing, clock configuration, and ordering-code attributes before transferring an existing design. When upgrading from a 512 KB derivative, measure the final linked image including bootloader and diagnostics; removing a device or changing its family can require board and driver revisions even when the package looks identical.
コンプライアンス情報
The manufacturer product page identifies the device as an industrial ARM Cortex-M4 microcontroller, but no explicit RoHS, REACH, halogen-free, or conflict-minerals declarations appear in the cited listings.