Z86C9333VSC - 33MHz ROMless 8-Bit MCU | Zilog
部品番号: Z86C9333VSC ✓ 生産中Z86C9333VSC 概要
A ROMless microcontroller is an application-specific processor whose firmware is stored outside the device, normally in external ROM, flash, or another memory device. The Z8 belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor control devices. This architecture gives designers control over program size and upgrade strategy while retaining a compact, deterministic instruction set for control-oriented products.
The Z86C93 family combines a 33 MHz operating rate with a hardware 16-bit by 16-bit multiplier, a 32-bit-by-16-bit divider, and three 16-bit counter timers. Additional features include a capture register and a fast-decrement mode. These peripherals reduce execution overhead in motor control, measurement, signal processing, and industrial equipment where multiplication, division, event capture, or periodic timing is performed frequently.
Because the device is ROMless, the complete memory interface and external program-memory requirements must be evaluated during PCB design. The MCU also requires an external clock and supporting reset circuitry according to the manufacturer reference design. Designers should preserve signal-integrity margins on clock, reset, address, and data paths, especially when the controller operates close to its maximum clock frequency.
Typical uses include industrial controllers, embedded timers, keypad interfaces, motor or stepper-control logic, data-acquisition equipment, and compact control modules. The arithmetic accelerator is particularly useful in proportional-control loops, scaling operations, pulse calculations, and sensor-conditioning algorithms that would otherwise require multiple software instructions.
Package compatibility is the primary replacement consideration. A replacement should use the same 44-pin PLCC footprint and preserve the same pin functions, clock expectations, external-memory interface, and peripheral resources. Software migration also requires compatible instruction behavior, interrupt structure, I/O registers, and timing characteristics; package matching alone does not guarantee functional interchangeability.
This page combines the Zilog device specifications with same-package family options, application guidance, package constraints, and engineering-oriented comparison criteria. These details help engineers distinguish a true PCB-level drop-in replacement from a functionally similar microcontroller that would require software, firmware, or hardware changes.
ドロップイン代替品: Z86C9333VSC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: Z86C9333VSC (同一形状・フットプリント) — 相違点: CPU Architecture, Package Type, Divider, Multiplier, Operating Supply Voltage.
Z86C9333VSG
✅ ドロップイン価格はお問い合わせください
データシートを見る →Z86C9333ASG
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
Z86C9325VSG
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →Z86C9333PSG
✅ ドロップイン📋 参考代替品(カタログ未掲載)
Z86C9325ASG
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →Z86C9333VSC 最大定格&電気的特性
| Product Type | 8-bit ROMless CMOS microcontroller |
| Processor Family | Zilog Z8 |
| 最大クロック周波数 | 33 MHz |
| CPU Architecture | 8-bit |
| Program Memory Type | ROMless |
| Multiplier | 16-bit x 16-bit hardware multiplier |
| Divider | 32-bit/16-bit hardware divider |
| Counter Timers | 3 x 16-bit |
| Capture Register | 1 capture register |
| Timer Fast Decrement Mode | Supported |
| パッケージ | 44-pin PLCC |
| 実装タイプ | Surface mount |
| RoHS ステータス | Compliant |
Z86C9333VSC 44-pin plcc ピン配置ガイド
Z86C9333VSC (44-pin plcc パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86C9333VSC.
詳細は データシート をご参照ください。
主な用途
Z86C9333VSC の用途: 6 件s: Industrial Timer and Sequence Controller, Stepper Motor Motion Control, Data Acquisition and Signal Measurement, Keypad and Human Interface Controller, Instrument Control and Calibration, Appliance Control and User Interface.
Industrial Timer and Sequence Controller
The Z86C9333VSC fits compact industrial timing modules because its 33 MHz 8-bit core and three 16-bit counter timers can handle multiple periodic events without dedicating separate timing components. The hardware capture register supports measurement of external event timing, while fast-decrement mode can simplify counting toward defined endpoints. Because the MCU is ROMless, a production controller can place firmware in external flash and update the control policy without changing the processor package. The engineering trade-off is that the external program-memory interface must be routed carefully and the firmware must provide boot and device-selection logic. Confirm the exact electrical limits and memory timing before releasing a 44-pin PLCC industrial design.
おすすめ
Stepper Motor Motion Control
The Z86C9333VSC can serve as the sequencing and timing controller in a stepper-motor subsystem. Its 16-bit by 16-bit hardware multiplier is useful for position, rate, and acceleration calculations, while the three 16-bit timers can organize step pulses, motion timing, and supervisory events. A ROMless implementation also permits field updates when motor behavior or safety logic changes. The controller must still generate precise step timing through timers and I/O rather than relying on software delays, because interrupt latency and instruction execution can affect pulse accuracy. Verify the I/O timing and external-memory requirements for the target PLCC footprint, and keep step-driver and motor-supply noise physically separated from sensitive control traces.
おすすめ
Data Acquisition and Signal Measurement
The Z86C9333VSC is suitable for a compact measurement controller that combines sensor sampling, event capture, and calculations. Its 33 MHz operating rate allows the 8-bit processor to service timing-sensitive I/O, while the hardware divider and multiplier support scale-factor, averaging, calibration, and unit-conversion arithmetic. The capture register can observe transitions from an external sensor or timing circuit, reducing the need to poll changing inputs continuously. As a ROMless controller, it can use external nonvolatile storage for calibration tables and configuration data. For accurate results, separate analog sensor conditioning from the digital controller, keep switching converters and clock edges away from sensitive traces, and validate the external program-memory timing at the highest operating frequency.
おすすめ
Keypad and Human Interface Controller
The Z86C9333VSC can implement a dedicated keypad, display-control, or menu interface while leaving higher-level processing to another controller. Three 16-bit timers support debounce timing, periodic display updates, and audible or visual feedback events, and the hardware arithmetic units reduce the instruction burden for value scaling and rate calculations. Its ROMless architecture allows interface behavior and code pages to be stored externally, simplifying firmware maintenance and regional customization. The PLCC package offers a compact socketed solution for repairable or prototype assemblies. The design must still debounce contacts in hardware or firmware, define fail-safe behavior for stuck keys, and ensure external memory access does not delay critical display or input timing.
おすすめ
Instrument Control and Calibration
The Z86C9333VSC can control measurement instruments by coordinating timing, front-panel input, calibration data, and status reporting. The 33 MHz clock rate supports responsive command handling, while the hardware multiplier and divider assist with calibration coefficients, attenuation factors, and unit conversions. Its ROMless format is useful when field-upgradeable calibration tables or configuration records must be retained in external memory. For laboratory equipment, use the timers to establish repeatable sampling intervals and the capture register to observe externally triggered events. Critical design work lies in isolating measurement grounds, stabilizing supplies, and validating timer accuracy over the required temperature range rather than treating software correction as a substitute for a sound analog front end.
おすすめ
Appliance Control and User Interface
The Z86C9333VSC can coordinate motor, keypad, timer, and safety-related functions in a compact appliance controller. Its three 16-bit timers provide dedicated timing resources for motor actuation, user feedback, and periodic housekeeping, while the hardware multiplier and divider simplify duty-cycle, rate, and timing calculations. ROMless operation permits firmware revisions and configuration storage without embedding a fixed program ROM in the controller. A practical appliance design should assign critical timing directly to timers, include hardware limits for motor or heater actuation, and provide a defined reset behavior for power restoration. Check the exact package pinout, supply range, and temperature limits against the appliance enclosure before treating this legacy PLCC device as a production choice.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86C9333VSC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z86C9333VSG | Z86C9333ASG | Z86C9325VSG | Z86C9333PSG | Z86C9325ASG |
|---|---|---|---|---|---|---|
| Package | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC | 44-pin PLCC |
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog | Zilog |
| CPU Architecture | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit | 8-bit |
| Maximum Clock Frequency | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz | 33 MHz |
| Program Memory Architecture | ROMless | ROMless | ROMless | ROMless | ROMless | ROMless |
| Hardware Multiplier | 16-bit x 16-bit | 16-bit x 16-bit | 16-bit x 16-bit | 16-bit x 16-bit | 16-bit x 16-bit | 16-bit x 16-bit |
| Hardware Divider | 32-bit/16-bit | 32-bit/16-bit | 32-bit/16-bit | 32-bit/16-bit | 32-bit/16-bit | 32-bit/16-bit |
| Counter Timers | 3 x 16-bit | 3 x 16-bit | 3 x 16-bit | 3 x 16-bit | 3 x 16-bit | 3 x 16-bit |
主な差別化要因
- Dedicated 16-bit by 16-bit multiplication hardware (vs Z86C9325VSG)
- Integrated 32-bit-by-16-bit division capability (vs Z86C9320VSG)
- Three dedicated 16-bit counter timers (vs Z86C9333ASG)
設計ノート
Do not treat a matching 44-pin PLCC footprint as sufficient proof of interchangeability. Before substituting a Z86C9333-family part, compare the pin-description table, external program-memory interface, reset and clock pins, I/O functions, electrical limits, temperature grade, and software-visible registers. A mechanically similar package can still require board or firmware changes if any signal assignment differs.
Route the clock, reset, program-memory address and data paths with short traces, continuous ground references, and minimal stubs. Because Z86C9333VSC can operate at 33 MHz and depends on external program memory, excessive trace capacitance or crosstalk can create access errors or unstable instruction execution. Keep external-memory placement consistent with the Zilog reference design and include adequate bypass capacitance at the MCU and memory devices.
The external ROMless architecture requires the processor and program-memory device to share a correctly sequenced and decoupled power network. Use the manufacturer's recommended supply and bypass arrangements, and verify startup behavior across the full input-voltage and temperature range. Account for memory-device supply current during code access so the regulator and layout support worst-case transitions rather than only idle current.
Preserve the PLCC package orientation, pin-1 identification, socket solderability, and adequate keep-out around the package perimeter. The PLCC format is useful in repairable and prototype assemblies, but mechanical retention and socket quality affect vibration tolerance and contact resistance. Confirm lead pitch, body dimensions, and pin numbering against the manufacturer package drawing before releasing artwork.
コンプライアンス情報
RoHS compliance is stated in the product-listing information for Z86C9333VSC. REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.