Zilog

Z86C9333VSC - 33MHz ROMless 8-Bit MCU | Zilog

MPN: Z86C9333VSC ✓ فعال
44-pin PLCC Package 33 MHz Speed ROMless Memory
حداقل سفارش: 1 |

Z86C9333VSC نمای کلی

The Zilog Z86C9333VSC is a ROMless 8-bit CMOS Z8 microcontroller operating at up to 33 MHz and housed in a 44-pin plastic leaded chip carrier package. It is designed for embedded control applications requiring dedicated arithmetic peripherals, multiple timers, flexible I/O, and external program memory.

A ROMless microcontroller is an application-specific processor whose firmware is stored outside the device, normally in external ROM, flash, or another memory device. The Z8 belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor control devices. This architecture gives designers control over program size and upgrade strategy while retaining a compact, deterministic instruction set for control-oriented products.

The Z86C93 family combines a 33 MHz operating rate with a hardware 16-bit by 16-bit multiplier, a 32-bit-by-16-bit divider, and three 16-bit counter timers. Additional features include a capture register and a fast-decrement mode. These peripherals reduce execution overhead in motor control, measurement, signal processing, and industrial equipment where multiplication, division, event capture, or periodic timing is performed frequently.

Because the device is ROMless, the complete memory interface and external program-memory requirements must be evaluated during PCB design. The MCU also requires an external clock and supporting reset circuitry according to the manufacturer reference design. Designers should preserve signal-integrity margins on clock, reset, address, and data paths, especially when the controller operates close to its maximum clock frequency.

Typical uses include industrial controllers, embedded timers, keypad interfaces, motor or stepper-control logic, data-acquisition equipment, and compact control modules. The arithmetic accelerator is particularly useful in proportional-control loops, scaling operations, pulse calculations, and sensor-conditioning algorithms that would otherwise require multiple software instructions.

Package compatibility is the primary replacement consideration. A replacement should use the same 44-pin PLCC footprint and preserve the same pin functions, clock expectations, external-memory interface, and peripheral resources. Software migration also requires compatible instruction behavior, interrupt structure, I/O registers, and timing characteristics; package matching alone does not guarantee functional interchangeability.

This page combines the Zilog device specifications with same-package family options, application guidance, package constraints, and engineering-oriented comparison criteria. These details help engineers distinguish a true PCB-level drop-in replacement from a functionally similar microcontroller that would require software, firmware, or hardware changes.

جایگزین‌های drop-in برای Z86C9333VSC — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای Z86C9333VSC (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در CPU Architecture, Package Type, Divider, Multiplier, Operating Supply Voltage.

Zilog
CPU Architecture: Z8 8-bit
Package Type: 48-pin LQFP
Divider: Hardwired 32-bit/16-bit divider
مقایسه با Z86C9333VSC →
Zilog
Package Type: 44-pin PLCC
Divider: 32-bit by 16-bit divider
Multiplier: 16-bit x 16-bit hardwired multiplier
مقایسه با Z86C9333VSC →
Zilog
CPU Architecture: 8 bit
Package Type: 48-pin LQFP
مقایسه با Z86C9333VSC →
IXYS
Package Type: 44-lead LCC (J-Lead)
Operating Supply Voltage: 4.5 V to 5.5 V
مقایسه با Z86C9333VSC →

Z86C9333VSG

✅ جایگزین مستقیم
IXYS
📦 44-pin PLCC
8-bit · 33 MHz · ROMless · 4.5 V to 5.5 V · Z8 series · 44-lead LCC (J-Lead) · 16.6 mm x 16.6 mm · Surface Mount

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

Z86C9333ASG

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Zilog
📦 44-pin PLCC
8-bit ROMless Z8 microcontroller · 33 MHz · 8 bit · Z8 C93 · 4.5 V to 5.5 V · ROMless · Supported · 48-pin LQFP

برای قیمت تماس بگیرید

Z86C9325VSG

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Zilog
📦 44-pin PLCC
8-bit ROMless Microcontroller · Zilog · Z8 · 8 bit · 25 MHz · 2.97 V to 5.5 V · 24 · ROMless

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

Z86C9333PSG

✅ جایگزین مستقیم
📦 44-pin PLCC
Matches the 44-pin PLCC package and 33 MHz family performance; exact suffix-specific temperature and electrical differences require confirmation.

📋 جایگزین مرجع (خارج از کاتالوگ)

Z86C9325ASG

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
Zilog
📦 44-pin PLCC
8-bit ROMless Z8 microcontroller · 25 MHz · 3 V to 5.5 V · Z8 8-bit · CMOS · External ROMless program memory · Hardwired 16-bit x 16-bit multiplier · Hardwired 32-bit/16-bit divider

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

Z86C9333VSC حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8-bit ROMless CMOS microcontroller
Processor Family Zilog Z8
حداکثر فرکانس کلاک 33 MHz
CPU Architecture 8-bit
Program Memory Type ROMless
Multiplier 16-bit x 16-bit hardware multiplier
Divider 32-bit/16-bit hardware divider
Counter Timers 3 x 16-bit
Capture Register 1 capture register
Timer Fast Decrement Mode Supported
بسته‌بندی 44-pin PLCC
نوع نصب Surface mount
وضعیت RoHS Compliant

راهنمای پیکربندی پین Z86C9333VSC 44-pin plcc

پیکربندی پین برای Z86C9333VSC (پکیج 44-pin plcc). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 44-pin plcc برای Z86C9333VSC

داده پین‌آوت تفصیلی موجود نیست برای Z86C9333VSC.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

Z86C9333VSC مناسب است برای 6 کاربردs: Industrial Timer and Sequence Controller, Stepper Motor Motion Control, Data Acquisition and Signal Measurement, Keypad and Human Interface Controller, Instrument Control and Calibration, Appliance Control and User Interface.

🏭

Industrial Timer and Sequence Controller

The Z86C9333VSC fits compact industrial timing modules because its 33 MHz 8-bit core and three 16-bit counter timers can handle multiple periodic events without dedicating separate timing components. The hardware capture register supports measurement of external event timing, while fast-decrement mode can simplify counting toward defined endpoints. Because the MCU is ROMless, a production controller can place firmware in external flash and update the control policy without changing the processor package. The engineering trade-off is that the external program-memory interface must be routed carefully and the firmware must provide boot and device-selection logic. Confirm the exact electrical limits and memory timing before releasing a 44-pin PLCC industrial design.

🔧

Stepper Motor Motion Control

The Z86C9333VSC can serve as the sequencing and timing controller in a stepper-motor subsystem. Its 16-bit by 16-bit hardware multiplier is useful for position, rate, and acceleration calculations, while the three 16-bit timers can organize step pulses, motion timing, and supervisory events. A ROMless implementation also permits field updates when motor behavior or safety logic changes. The controller must still generate precise step timing through timers and I/O rather than relying on software delays, because interrupt latency and instruction execution can affect pulse accuracy. Verify the I/O timing and external-memory requirements for the target PLCC footprint, and keep step-driver and motor-supply noise physically separated from sensitive control traces.

📡

Data Acquisition and Signal Measurement

The Z86C9333VSC is suitable for a compact measurement controller that combines sensor sampling, event capture, and calculations. Its 33 MHz operating rate allows the 8-bit processor to service timing-sensitive I/O, while the hardware divider and multiplier support scale-factor, averaging, calibration, and unit-conversion arithmetic. The capture register can observe transitions from an external sensor or timing circuit, reducing the need to poll changing inputs continuously. As a ROMless controller, it can use external nonvolatile storage for calibration tables and configuration data. For accurate results, separate analog sensor conditioning from the digital controller, keep switching converters and clock edges away from sensitive traces, and validate the external program-memory timing at the highest operating frequency.

🧩

Keypad and Human Interface Controller

The Z86C9333VSC can implement a dedicated keypad, display-control, or menu interface while leaving higher-level processing to another controller. Three 16-bit timers support debounce timing, periodic display updates, and audible or visual feedback events, and the hardware arithmetic units reduce the instruction burden for value scaling and rate calculations. Its ROMless architecture allows interface behavior and code pages to be stored externally, simplifying firmware maintenance and regional customization. The PLCC package offers a compact socketed solution for repairable or prototype assemblies. The design must still debounce contacts in hardware or firmware, define fail-safe behavior for stuck keys, and ensure external memory access does not delay critical display or input timing.

🖥️

Instrument Control and Calibration

The Z86C9333VSC can control measurement instruments by coordinating timing, front-panel input, calibration data, and status reporting. The 33 MHz clock rate supports responsive command handling, while the hardware multiplier and divider assist with calibration coefficients, attenuation factors, and unit conversions. Its ROMless format is useful when field-upgradeable calibration tables or configuration records must be retained in external memory. For laboratory equipment, use the timers to establish repeatable sampling intervals and the capture register to observe externally triggered events. Critical design work lies in isolating measurement grounds, stabilizing supplies, and validating timer accuracy over the required temperature range rather than treating software correction as a substitute for a sound analog front end.

⚡

Appliance Control and User Interface

The Z86C9333VSC can coordinate motor, keypad, timer, and safety-related functions in a compact appliance controller. Its three 16-bit timers provide dedicated timing resources for motor actuation, user feedback, and periodic housekeeping, while the hardware multiplier and divider simplify duty-cycle, rate, and timing calculations. ROMless operation permits firmware revisions and configuration storage without embedding a fixed program ROM in the controller. A practical appliance design should assign critical timing directly to timers, include hardware limits for motor or heater actuation, and provide a defined reset behavior for power restoration. Check the exact package pinout, supply range, and temperature limits against the appliance enclosure before treating this legacy PLCC device as a production choice.

Where can I buy Z86C9333VSC online?
The Z86C9333VSC can be requested through the Request a Quote form on this page. The form lets engineers specify the required quantity, package, and delivery expectations without relying on a static marketplace listing. Because this is a ROMless MCU with a 44-pin PLCC package, confirm that the requested suffix is exactly Z86C9333VSC before releasing a purchase order.
What is the price of Z86C9333VSC?
The current unit price for Z86C9333VSC should be obtained through the Request a Quote form on this page. The Z86C9333VSC is a legacy-compatible, ROMless 8-bit MCU, so project quotations may depend on quantity, inventory condition, and packaging requirements. Use the form to request a current quotation for the exact MPN rather than relying on an outdated historical amount.
What is the lead time for Z86C9333VSC?
The current lead time for Z86C9333VSC must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production status, and component traceability requirements. For production builds, request the exact MPN, quantity, date code policy, and inspection requirements so the schedule reflects the intended configuration.
Is Z86C9333VSC in stock?
Stock status for Z86C9333VSC should be confirmed through the Request a Quote form on this page. The manufacturer part is a 44-pin PLCC, 33 MHz, ROMless 8-bit Z8 microcontroller, so a valid quotation should identify the package suffix and any traceability or date-code conditions. Use the form for current inventory and delivery information.
What is the operating frequency of Z86C9333VSC?
The Z86C9333VSC operates at up to 33 MHz. According to the Zilog Z86C93 datasheet, the device is a CMOS ROMless Z8 microcontroller, and the 33 MHz clock rate supports faster control-loop execution and faster external-memory access than lower-speed members of the family. The clock source and timing margin should be designed according to the manufacturer circuit recommendations.
What are the key specifications of Z86C9333VSC that engineers should know?
The Z86C9333VSC is a 33 MHz, 8-bit, ROMless CMOS Z8 microcontroller in a 44-pin PLCC package. Its principal arithmetic peripherals are a hardware 16-bit by 16-bit multiplier, a 32-bit-by-16-bit divider, three 16-bit counter timers, one capture register, and a fast-decrement mode. The ROMless architecture requires external program storage, making the memory interface and firmware compatibility central design considerations.
Z86C9333VSC vs Z86C9333VSG - which is better for an existing design?
The Z86C9333VSG is the closest same-package option for a Z86C9333VSC design because both use the 44-pin PLCC format and belong to the same Z86C9333 family. Their clock rating remains 33 MHz. Before substitution, verify the manufacturer pinout, temperature grade, power specifications, and product status for the exact suffix, because those details determine whether an existing PCB and qualification record remain valid.
What is the difference between Z86C9333VSC and Z86C9333ASG?
The Z86C9333VSC is a 44-pin PLCC, 33 MHz, ROMless Z8 microcontroller, while the Z86C9333ASG is another member of the Z86C9333 family associated with a different package suffix. Both use the same architectural family and 33 MHz performance class, but package dimensions, pin assignment, temperature grade, and qualification requirements must be checked before treating either as a direct replacement.
When should I choose Z86C9333VSC over Z86C9325VSG?
Choose the Z86C9333VSC when the design specifically targets the Z86C9333 peripheral set and its 33 MHz ROMless architecture. The Z86C9325VSG is a related Z8 device in the same 44-pin PLCC format, but its register map and internal feature allocation may differ. Select it only after comparing the datasheet peripheral tables, interrupt vectors, I/O mapping, and existing firmware dependencies.
Is Z86C9333VSC suitable for industrial control equipment?
The Z86C9333VSC is suitable for compact embedded control systems when the design can use its 8-bit Z8 architecture, external program memory, and hardware arithmetic peripherals. The 33 MHz operating rate, 16-bit by 16-bit multiplier, 32-bit-by-16-bit divider, and three 16-bit timers support timing and calculation-heavy control tasks. Industrial suitability still depends on temperature grade, supply range, qualification status, and system isolation requirements.
What can replace Z86C9333VSC?
The strongest replacement candidate is the Z86C9333VSG because it is identified as a same-family 44-pin PLCC option with the same 33 MHz performance class. A true drop-in replacement must also preserve the pinout, external program-memory interface, I/O functions, timer resources, clock behavior, electrical limits, and software register compatibility. The Z86C9325VSG and Z86C9320VSG are related family options but require a more detailed firmware and peripheral audit.
Is Z86C9333VSG the same as Z86C9333VSC?
The Z86C9333VSG is a close family alternative to the Z86C9333VSC and uses the same 44-pin PLCC format, but it should not be assumed to be identical without a suffix-level comparison. Both are 33 MHz members of the Z86C9333 family. Check electrical ratings, temperature grade, status, pin naming, and lifecycle documentation before approving it as a drop-in substitution.
Where can I download the Z86C9333VSC datasheet PDF?
The Z86C9333VSC datasheet can be reached through the Zilog Z86C93 datasheet link on this page. The document is titled Z86C93 Datasheet and describes the CMOS ROMless Z8 family, including the hardware multiplier, divider, three counter timers, capture register, and fast-decrement mode. Use the manufacturer pin-description and electrical tables for final PCB and firmware verification.
Where can I find the Z86C9333VSC pinout?
The Z86C9333VSC pinout should be taken from the pin-description table in the Zilog Z86C93 datasheet. The device uses a 44-pin PLCC package, with pin 1 orientation determined by the package marker and the manufacturer numbering diagram. Assign PCB tracks and external-memory connections only after cross-checking every power, ground, clock, reset, address, data, and control signal in the datasheet.
What is the best Zilog equivalent for Z86C9333VSC?
The best same-package Zilog candidate to evaluate first is the Z86C9333VSG because it shares the Z86C9333 family identity, 33 MHz operating class, and 44-pin PLCC format. It is a drop-in candidate only if the suffix comparison confirms identical pin functions, electrical characteristics, temperature grade, and software-visible registers. No cross-brand equivalent was identified, so a cross-manufacturer replacement would require software and board-level qualification.

داده‌های مرجع مهندسی برای Z86C9333VSC — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the Z86C9333VSC when an existing 44-pin PLCC design depends on the Z86C9333 ROMless architecture, 33 MHz clock, three 16-bit timers, hardware multiplier, and hardware divider. Z86C9333VSG is the first same-family alternative to evaluate because it shares the package format and performance class, but electrical ratings, temperature grade, lifecycle status, and pin descriptions still require suffix-level confirmation. Z86C9333ASG or Z86C9333PSG may suit designs needing another suffix within the same family, subject to the same qualification checks. Z86C9325VSG and Z86C9325ASG are useful only when their peripheral differences are acceptable and firmware can be validated. No cross-brand drop-in replacement was established, so a different manufacturer should be selected only after accepting a full hardware, firmware, and qualification redesign.

مقایسه با جایگزین‌ها

پارامتر این محصول Z86C9333VSG Z86C9333ASG Z86C9325VSG Z86C9333PSG Z86C9325ASG
Package 44-pin PLCC 44-pin PLCC 44-pin PLCC 44-pin PLCC 44-pin PLCC 44-pin PLCC
Brand Zilog Zilog Zilog Zilog Zilog Zilog
CPU Architecture 8-bit 8-bit 8-bit 8-bit 8-bit 8-bit
Maximum Clock Frequency 33 MHz 33 MHz 33 MHz 33 MHz 33 MHz 33 MHz
Program Memory Architecture ROMless ROMless ROMless ROMless ROMless ROMless
Hardware Multiplier 16-bit x 16-bit 16-bit x 16-bit 16-bit x 16-bit 16-bit x 16-bit 16-bit x 16-bit 16-bit x 16-bit
Hardware Divider 32-bit/16-bit 32-bit/16-bit 32-bit/16-bit 32-bit/16-bit 32-bit/16-bit 32-bit/16-bit
Counter Timers 3 x 16-bit 3 x 16-bit 3 x 16-bit 3 x 16-bit 3 x 16-bit 3 x 16-bit

تفاوت‌های کلیدی

  • Dedicated 16-bit by 16-bit multiplication hardware (در مقابلZ86C9325VSG)
  • Integrated 32-bit-by-16-bit division capability (در مقابلZ86C9320VSG)
  • Three dedicated 16-bit counter timers (در مقابلZ86C9333ASG)

یادداشت‌های طراحی

Do not treat a matching 44-pin PLCC footprint as sufficient proof of interchangeability. Before substituting a Z86C9333-family part, compare the pin-description table, external program-memory interface, reset and clock pins, I/O functions, electrical limits, temperature grade, and software-visible registers. A mechanically similar package can still require board or firmware changes if any signal assignment differs.

Route the clock, reset, program-memory address and data paths with short traces, continuous ground references, and minimal stubs. Because Z86C9333VSC can operate at 33 MHz and depends on external program memory, excessive trace capacitance or crosstalk can create access errors or unstable instruction execution. Keep external-memory placement consistent with the Zilog reference design and include adequate bypass capacitance at the MCU and memory devices.

The external ROMless architecture requires the processor and program-memory device to share a correctly sequenced and decoupled power network. Use the manufacturer's recommended supply and bypass arrangements, and verify startup behavior across the full input-voltage and temperature range. Account for memory-device supply current during code access so the regulator and layout support worst-case transitions rather than only idle current.

Preserve the PLCC package orientation, pin-1 identification, socket solderability, and adequate keep-out around the package perimeter. The PLCC format is useful in repairable and prototype assemblies, but mechanical retention and socket quality affect vibration tolerance and contact resistance. Confirm lead pitch, body dimensions, and pin numbering against the manufacturer package drawing before releasing artwork.

اطلاعات انطباق

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS compliance is stated in the product-listing information for Z86C9333VSC. REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.

تاریخ تأیید داده‌ها: 2026-11-17 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

Z86C9333VSC datasheet Z86C9333VSC pinout Z86C9333VSC datasheet pdf Z86C9333VSC equivalent Z86C9333VSC replacement Z86C9333VSC cross reference Z86C9333VSC vs Z86C9333VSG Z86C9333VSC footprint Z86C9333VSC price Z86C9333VSC stock Zilog Z86C9333VSC Z86C9333VSC 44-pin PLCC Z86C9333VSC application circuit

قطعات و اصطلاحات مرتبط

Zilog Z86C9333VSC Z86C9333VSG Z86C9333ASG Z86C9333PSG Z86C9325VSG Z86C9325ASG Z8 ROMless microcontroller 8-bit microcontroller embedded processor CMOS 33 MHz 16-bit x 16-bit multiplier 32-bit/16-bit divider 16-bit counter timer capture register fast decrement mode 44-pin PLCC PLCC package family surface-mount package external program memory RoHS industrial control
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ