Z86E2304PSC - 8-Bit 4MHz OTP Keyboard MCU | Zilog
部品番号: Z86E2304PSC ✓ 生産中Z86E2304PSC 概要
A keyboard-controller microcontroller is an embedded MCU optimized for scanning switch matrices and managing key events. The Z86E23 family combines an 8-bit processor core, OTP program storage, RAM, timers, and keyboard-control peripherals in one device. This places it in the broader hierarchy of embedded controller, 8-bit microcontroller, and semiconductor product categories.
The Z86E2304PSC provides 8 KB of OTP program memory, 236 bytes of RAM, two programmable counter/timer blocks, and a 4 MHz clock. Its pin-compatible OTP architecture is based on the Z8614 and Z8602 keyboard-controller family, allowing designers to retain established keyboard layouts while using one-time-programmable devices for production control.
The controller is intended for matrix keyboard implementations where firmware must detect pressed and released keys, debounce contacts, maintain rollover information, and report key events to a host or application processor. Its dedicated keyboard-control resources reduce the amount of external logic required in simple keyboard products.
Typical uses include computer keyboards, security-keypads, industrial control panels, access terminals, point-of-sale equipment, and remote key-entry modules. The 40-pin DIP package also supports prototype boards, educational platforms, and legacy control systems where through-hole assembly and socketed parts are preferred.
When laying out a board, preserve the Z8 keyboard-controller signal assignments and provide adequate decoupling close to the supply pins. Confirm the external clock, reset, matrix-scan, and host-interface connections against the manufacturer datasheet before fabricating a replacement PCB.
This product page combines device specifications, package details, sourcing guidance, verified drop-in candidates, and practical keyboard-controller design notes to support component selection, PCB reuse, firmware planning, and production procurement.
ドロップイン代替品: Z86E2304PSC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
Z8614
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
Z8602
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
Z86E2304P
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
Z86E2304PSC-ND
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
Z86E23
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
Z86E2304PSC 最大定格&電気的特性
| Product Type | 8-bit keyboard-controller microcontroller |
| Processor Architecture | Z8 8-bit core |
| 最大クロック周波数 | 4 MHz |
| Program Memory | 8 KB OTP |
| Program Memory Organization | 8K x 8 bits |
| RAM | 236 bytes |
| Operating Voltage Range | 4.5 V to 5.5 V |
| パッケージ | 40-pin DIP |
| 実装タイプ | Through-hole |
| Terminal Count | 40 terminals |
| Temperature Grade | Commercial |
| Counter/Timer Count | 2 |
| Programming | One-time programmable |
| Primary Function | Keyboard matrix scanning and key-event control |
| Family Compatibility | Pin-compatible with Z8614 and Z8602 keyboard controllers |
Z86E2304PSC 40-pin dip ピン配置ガイド
Z86E2304PSC (40-pin dip パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86E2304PSC.
詳細は データシート をご参照ください。
主な用途
Z86E2304PSC の用途: 6 件s: Computer Keyboard Controller, Security Keypad, Industrial Control Panel, Point-of-Sale Terminal, Access Control Terminal, Legacy Equipment Repair.
Computer Keyboard Controller
The Z86E2304PSC fits a matrix keyboard because its Z8 core can scan switch contacts while its two counter/timers support timing-intensive debounce and rollover functions. Operating at 4 MHz with 8 KB of OTP program memory provides room for key tables, scan-state management, and host-reporting firmware. The 40-pin DIP package also simplifies prototype construction and socket-based legacy keyboard repairs, although production designers should confirm signal assignments directly from the Zilog pin table.
おすすめ
Security Keypad
A security keypad can use the Z86E2304PSC to scan a matrix of numeric or programmable keys and maintain debounced key state in a 4.5 V to 5.5 V control circuit. Its 236 bytes of RAM are suitable for transient key state, while 8 KB of OTP holds fixed scanning and reporting logic. One-time programming is advantageous when the keypad has a fixed code map and must prevent routine firmware alteration, subject to security requirements and final certification.
おすすめ
Industrial Control Panel
The Z86E2304PSC can serve as the input controller for an industrial membrane keypad or operator panel. At 4 MHz, its 8-bit Z8 core can manage matrix scanning, debounce timing, key rollover, and simple host communication while executing from OTP memory. The through-hole 40-pin DIP package is particularly useful for legacy control equipment, test fixtures, and systems that favor replaceable socketed controllers over compact surface-mount packages.
おすすめ
Point-of-Sale Terminal
Point-of-sale equipment commonly uses a dedicated keyboard scanner for numeric entry, function keys, and cashier input. The Z86E2304PSC can debounce and report these contacts while its two programmable counter/timers assist periodic scanning and timing functions. With 236 bytes of RAM and 8 KB of OTP, the device accommodates compact fixed-purpose firmware, making it suitable for cost-sensitive terminals where the keyboard interface must remain independent from a larger application processor.
おすすめ
Access Control Terminal
An access-control terminal can assign contact scanning and event handling to the Z86E2304PSC while leaving credential processing to a higher-level controller. The device operates from 4.5 V to 5.5 V and provides two counter/timers for scan timing and debounce management. OTP storage helps lock the keypad interface behavior after programming, while the DIP package supports repairable industrial terminals and controlled production fixtures that use through-hole assembly.
おすすめ
Legacy Equipment Repair
The Z86E2304PSC is appropriate for maintaining legacy keyboard-controller boards where a 40-pin DIP footprint and Z8-family behavior are required. Its 8 KB OTP memory supports replication of compact scanning and reporting firmware, and its 236 bytes of RAM cover current key state and related working variables. When replacing an original controller, compare the complete pin description, clock configuration, reset behavior, and counter/timer assignments rather than relying on package shape alone.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E2304PSC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z8614 | Z8602 | Z86E2304P | Z86E2304PSC-ND | Z86E23 |
|---|---|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog | Zilog |
| Package | 40-pin DIP | 40-pin DIP | 40-pin DIP | 40-pin DIP | 40-pin DIP | 40-pin DIP |
| Product Type | 8-bit keyboard-controller microcontroller | Keyboard-controller microcontroller | Keyboard-controller microcontroller | 8-bit keyboard-controller microcontroller | 8-bit keyboard-controller microcontroller | 8-bit keyboard-controller microcontroller |
| Processor Architecture | Z8 8-bit core | Z8 8-bit core | Z8 8-bit core | Z8 8-bit core | Z8 8-bit core | Z8 8-bit core |
| Maximum Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| Operating Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Counter/Timer Count | 2 | 2 | 2 | 2 | 2 | 2 |
主な差別化要因
- OTP implementation within the Z8 keyboard-controller family (vs Z8614)
- Documented relationship to two established keyboard-controller baselines (vs Z8602)
- Commercial 40-pin DIP integration (vs Z86E23)
設計ノート
Preserve the complete Z86E23 keyboard-controller footprint rather than substituting a generic 40-pin DIP footprint. Confirm pin 1 orientation, the exposed-side numbering, power connections, reset, clock, matrix-scan outputs, and host-interface signals against the manufacturer pin-description table. Through-hole construction simplifies assembly, but correct pin assignment is still essential because package compatibility alone does not establish functional compatibility.
Design the controller rail for the documented 4.5 V to 5.5 V operating range and place the required bypass capacitor close to the supply and ground pins. Keep high-current switching nodes, relay drivers, and display drivers away from keyboard-scan traces to reduce false key events. Verify startup and reset behavior with the complete peripheral circuit because keyboard controllers may interpret unstable matrix states during power-up.
Do not treat the Z8614 or Z8602 as automatic replacements without checking memory, programming, timing, and counter/timer assignments. The Zilog datasheet identifies the Z86E23 as pin-compatible with these devices, but firmware can still depend on reset timing, oscillator configuration, interrupt behavior, and application-specific peripheral differences. Validate the substitute on a representative keyboard matrix before releasing production hardware.
Route keyboard matrix traces away from noisy analog or switching circuitry and use a consistent ground reference across the controller and scan matrix. Although the Z86E2304PSC is an 8-bit device intended for matrix control rather than high-speed communications, long or loosely coupled scan lines can increase susceptibility to contact bounce and electromagnetic coupling. Keep the PCB return path continuous and maintain adequate spacing from mains and inductive components.
コンプライアンス情報
The Z86E2304PSC is a commercial-grade legacy 8-bit microcontroller, but explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified. Use the current manufacturer environmental declaration for formal compliance assessment.