Z86E3312SSC - 8-Bit 12MHz OTP Microcontroller | Zilog
部品番号: Z86E3312SSC ✓ 生産中Z86E3312SSC 概要
A microcontroller is a complete embedded processing system integrated on one semiconductor device. The Zilog Z8 family belongs to the hierarchy of microcontrollers, embedded processors, and programmable logic devices. Unlike a general-purpose microprocessor, this device includes program memory, data memory, I/O, timing, and interrupt resources on one chip. That integration reduces board size and component count while simplifying firmware development for embedded control tasks.
The principal features include an 8-bit data bus, a 12 MHz maximum clock, 4 KB of OTP program memory, 237 bytes of RAM, and 24 general-purpose I/O pins. OTP memory allows a programmed image to be permanently stored in the finished device, which is useful for products that do not require field re-programming. The 24 I/O lines provide substantial peripheral connectivity for switches, sensors, indicators, actuators, and other discrete control signals.
The Z8 architecture is designed for efficient embedded control rather than high-throughput computation. Its 8-bit internal architecture, organized program memory, and dedicated I/O capabilities support compact control loops and cost-sensitive product designs. EBI and EMI connectivity adds external-interface flexibility, while the 4.5 V to 5.5 V operating range supports conventional 5 V equipment. Because the program memory is OTP rather than flash, firmware should be finalized and tested before the programmed devices are released.
Typical uses include appliance controllers, small motor-control systems, security and access-control equipment, LED-control modules, industrial interface boards, and compact consumer products. The 24 available I/O lines are particularly useful when a design requires multiple discrete inputs and outputs but does not need a large external memory interface. A 12 MHz clock also provides adequate processing performance for sensor sampling, state-machine logic, and simple communication protocols.
PCB design should account for all 28 package leads and route sensitive signals away from noisy switching nodes. Confirm oscillator, reset, programming, and I/O assignments against the manufacturer pin-description table before layout release. Because OTP devices cannot be erased, production planning should include firmware verification and controlled programming to avoid unrecoverable program-memory errors.
This product page combines the Z86E3312SSC architecture, package details, application guidance, and verified sourcing information with an explicit focus on design consequences. It also distinguishes confirmed drop-in replacements from merely related Z8 products, helping engineers avoid selecting a device with a different package or pinout.
ドロップイン代替品: Z86E3312SSC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: Z86E3312SSC (同一形状・フットプリント) — 相違点: Data Bus Width.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストZ86E3312SSC 最大定格&電気的特性
| Product Type | 8-bit Z8 Microcontroller |
| Architecture | 8-bit |
| データバス幅 | 8 bit |
| Maximum Clock Speed | 12 MHz |
| Program Memory | 4 KB OTP (4K x 8) |
| Data Memory | 237 bytes RAM |
| General-Purpose I/O Pins | 24 pins |
| 動作電源電圧 | 4.5 V to 5.5 V |
| パッケージ | 28-pin SOIC |
| Package Width | 7.50 mm |
| 実装タイプ | Surface Mount |
| External Bus Interface | EBI/EMI connectivity |
| メモリタイプ | One-Time Programmable (OTP) ROM |
| Lifecycle Stage | Active |
| Program Memory Rewrite | Not rewriteable after programming |
Z86E3312SSC 7.50 mm ピン配置ガイド
Z86E3312SSC (7.50 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86E3312SSC.
詳細は データシート をご参照ください。
主な用途
Z86E3312SSC の用途: 6 件s: Appliance Control, Motor and Valve Sequencing, Access and Security Control, LED and Display Control, Sensor Interface Module, Programmable Logic Controller.
Appliance Control
The Z86E3312SSC fits compact appliance controllers because its 8-bit CPU executes control-state logic efficiently while 24 general-purpose I/O pins connect buttons, indicators, solenoids, and sensors. Operating from 4.5 V to 5.5 V supports conventional 5 V control boards. The 4 KB OTP program store is appropriate when operating firmware is finalized before production, although one-time programming makes revision and recovery procedures especially important. Designers should reserve sufficient I/O for status feedback and use external protection where inductive loads are switched.
おすすめ
Motor and Valve Sequencing
The Z86E3312SSC can manage command sequencing, timing, limit checks, and fault handling in small motor- or valve-control systems. Its 12 MHz clock supports responsive state-machine operation, and the 24 I/O pins can interface with position switches, command inputs, status indicators, and gate-driver logic. The MCU should not directly drive high-current motors; power transistors, flyback protection, and suitable thermal design are required. Firmware must also account for OTP permanence and validate every actuator sequence before programming production units.
おすすめ
Access and Security Control
The Z86E3312SSC is suitable for compact access-control panels, credential readers, and security modules that combine several digital inputs with indicator outputs. Its 24 I/O pins can support keypads, contact sensors, alarm outputs, and communication interfaces, while the 8-bit processor handles authorization and event logic. EBI/EMI connectivity provides a path to external components or bus interfaces. For powered door equipment, include transient protection and separate the MCU supply from inductive loads to prevent disturbances from causing resets or faulty control decisions.
おすすめ
LED and Display Control
The Z86E3312SSC can drive LED status systems, small displays, and illumination controllers where multiple outputs must be coordinated by embedded software. The 24 I/O pins provide ample digital connections for indicator LEDs, display segments, selection logic, and user controls. At a 12 MHz clock, the processor can manage animation, timing, and input-driven modes while using 4 KB of OTP for fixed control firmware. Current limiting, driver topology, and ground-return design remain external to the MCU, and display refresh routines should avoid blocking safety-related functions.
おすすめ
Sensor Interface Module
The Z86E3312SSC works well in a small sensor-interface module that converts digital inputs into measurements, thresholds, and control outputs. Its 8-bit architecture is appropriate for digital sensors, switches, counters, and simple threshold logic, while 24 I/O pins reduce the need for external I/O expanders. EBI/EMI connectivity can link the controller to additional system devices. Analog sensor conditioning and precision conversion are outside the MCU's direct function, so those signals require suitable front-end circuits and careful grounding to avoid introducing errors before digital processing.
おすすめ
Programmable Logic Controller
The Z86E3312SSC can serve as the controller for a small programmable logic module handling discrete inputs, relay outputs, sequencing, and operating modes. Its 12 MHz clock and 24 I/O pins provide adequate resources for compact machines and laboratory equipment, while EBI/EMI connectivity supports expansion. The 4 KB OTP memory is appropriate for fixed production logic but not for frequently changing user programs. Use galvanic isolation, surge suppression, and appropriately rated drivers for industrial or safety-related outputs rather than routing hazardous voltages directly to device pins.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E3312SSC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
設計ノート
Treat OTP programming as a production-controlled operation. The Z86E3312SSC contains 4 KB of one-time-programmable ROM, so an incorrect program image cannot be erased and rewritten in the field. Validate the code, configuration bytes, oscillator settings, and all I/O assignments on representative engineering devices before programming production quantities. Maintain revision control for firmware and define a traceability procedure linking each programmed device to its approved image.
Assign every one of the 28 SOIC leads from the manufacturer pin-description table before routing the PCB. The 24 general-purpose I/O count does not imply that all other leads are simple power, ground, or no-connect pins; clock, reset, programming, and dedicated functions must be checked explicitly. Keep decoupling and ground-return paths compact, and place input/output protection close to connectors so switching transients are intercepted before reaching the MCU.
Design the board around the documented 4.5 V to 5.5 V operating range rather than assuming that 5 V is the only acceptable rail. Provide clean local decoupling at the supply pins and keep high-current load returns away from sensitive signal paths. Relay, motor, lamp, and solenoid loads should use separate driver stages with appropriate flyback or transient suppression because direct inductive loading can disturb the MCU supply and cause unintended resets.
Route oscillator and reset-related signals away from switching nodes, relay drivers, and high-current output returns. Use a continuous ground reference beneath the device where the package and board construction permit, and place external timing components according to the manufacturer reference layout. Since this MCU coordinates many I/O lines in compact equipment, stable return paths are especially important when inputs connect to long wires or cables outside the enclosure.
コンプライアンス情報
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for Z86E3312SSC in the available product information.