Z86E8316SSG - 8-Bit 16MHz MCU with ADC | Zilog
部品番号: Z86E8316SSG ✓ 生産中Z86E8316SSG 概要
A microcontroller is the central processing element of an embedded system, combining a CPU core, nonvolatile program memory, data memory, peripherals, and input/output circuitry on one integrated circuit. Within the embedded-controller hierarchy, the Z8 MCU family provides dedicated resources for sensing, timing, communications, and actuator control without requiring a separate processor or large external memory. The Z86E8316SSG is positioned for compact control designs that need moderate flash-free program storage and analog measurement capability.
Key characteristics include a 16 MHz operating clock, 4 KB OTP program memory, an integrated ADC, and 28 packaged I/O and control pins. One-time-programmable memory is suited to products whose firmware is finalized during manufacturing because it cannot be rewritten in the field. This characteristic supports deployment of relatively stable control code in products such as keypads, security equipment, process-control modules, and household appliances.
The Z8 register-to-register instruction organization provides direct operation between registers and is designed for higher code efficiency than accumulator-limited RISC approaches in suitable control loops. The integrated ADC allows a design to acquire analog sensor signals without a separate converter, reducing component count and board area. Designers must still confirm ADC resolution, conversion timing, and channel assignment against the manufacturer datasheet before defining analog front-end channels.
Typical uses include security keypads, appliance controllers, process-control interfaces, and embedded sensor modules. The 28-pin SOIC footprint is also convenient for designs that must remain on a through-hole-compatible leaded package rather than move to a fine-pitch land pattern. Confirm the exact pin multiplexing, power rails, and peripheral assignments when planning a PCB because footprint compatibility alone does not guarantee identical board-level behavior.
A critical design consideration is the one-time-programmable memory decision. Choose the device only when the complete firmware image can be validated before programming; use a flash-memory MCU when field updates, last-minute calibration, or firmware revision after manufacture are required. Confirm the current operating voltage, temperature limits, and electrical characteristics before releasing a production design.
This page combines package information, architecture details, verified drop-in comparison data, and practical selection guidance for engineers evaluating the Z86E8316SSG for compact embedded-control products.
ドロップイン代替品: Z86E8316SSG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
Z86E8316SSC
✅ ドロップイン📋 参考代替品（カタログ未掲載）
Z86E8316SSG 最大定格＆電気的特性
| Microcontroller Type | 8-bit microcontroller |
| Processor Family | Z8 MCU family |
| 最大クロック周波数 | 16 MHz |
| Program Memory | 4 KB OTP |
| Analog-to-Digital Converter | Integrated ADC |
| Architecture | Register-to-register |
| Package Type | 28-pin SOIC |
| Package Code | SOP |
| Lead Form | Gull wing |
| Package Shape | Rectangular |
| Number of Terminals | 28 |
| Temperature Grade | Commercial |
| 実装タイプ | Surface mount |
Z86E8316SSG rectangular ピン配置ガイド
Z86E8316SSG (rectangular パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: Z86E8316SSG.
詳細は データシート をご参照ください。
主な用途
Z86E8316SSG の用途: 6 件s: Security Keypad Controller, Household Appliance Controller, Process-Control Interface Module, Compact Sensor Module, Keyboard and Human-Interface Controller, Simple Audio Interface Controller.
Security Keypad Controller
The Z86E8316SSG fits a security-keypad module because its 8-bit Z8 core runs at 16 MHz and provides 4 KB of OTP program memory for keypad scanning, debounce logic, access-state management, and indicator control. The integrated ADC can monitor a simple analog input if the keypad design uses a resistive or sensing arrangement. The 28-pin SOIC package also permits assembly using standard leaded-package inspection and repair practices. Because the program memory is one-time-programmable, the complete firmware image should be validated before parts are programmed, and the board should reserve I/O for the key matrix, buzzer, status LED, and communication interface.
おすすめ
Household Appliance Controller
The Z86E8316SSG is well suited to appliance control functions such as user-interface handling, relay sequencing, motor timing, and temperature-related sensing. Its 16 MHz operating rate supports responsive control loops, while the integrated ADC can reduce the need for a separate analog converter in simple sensing circuits. The 4 KB OTP memory is appropriate when appliance firmware is stable and does not require field updates. Designers should use the manufacturer pin-description table to assign motor, heater, and sensor interfaces, and should verify that the 28-pin SOIC footprint leaves enough I/O for load drivers, safety interlocks, and the appliance power supply.
おすすめ
Process-Control Interface Module
The Z86E8316SSG can serve as the local controller in a compact process-control module that monitors analog sensor conditions and drives discrete outputs. The ADC provides a practical starting point for closed-loop monitoring, while the 16 MHz 8-bit architecture handles timing, filtering, and state-machine tasks. The commercial-temperature grade and 28-pin leaded package support a straightforward embedded-board layout, although the complete environmental range and electrical limits must be checked against the manufacturer datasheet. Keep analog traces short, provide a stable reference arrangement, and reserve serial pins for an upstream controller if remote monitoring or setpoint transfer is required.
おすすめ
Compact Sensor Module
The Z86E8316SSG fits a compact embedded sensor module where processing, analog acquisition, and communication must coexist on a limited board area. The 28-pin SOIC package leaves board perimeter for a connector or a castellation edge, while the integrated ADC can sample slow-changing analog sensor outputs. The register-to-register Z8 architecture is effective for calibration tables, filtering, and threshold decisions without adding external program storage. Because OTP memory cannot be rewritten, place calibration data in a separate mechanism or fix the calibration flow before programming, and confirm the electrical limits of each sensor interface against the manufacturer documentation.
おすすめ
Keyboard and Human-Interface Controller
The Z86E8316SSG can implement keyboard scanning, matrix debounce, status indication, and host communication in a dedicated human-interface module. A 16 MHz clock gives comfortable timing margin for periodic scanning and debounce filtering, and the 4 KB OTP memory accommodates a substantial control program for a fixed keyboard layout. The integrated ADC is optional for resistive key sensing and should be used only within its documented performance limits. Firmware that recognizes multiple keypad layouts or receives post-deployment changes should be placed in a flash-memory MCU instead, since the one-time-programmable memory cannot accept field revisions.
おすすめ
Simple Audio Interface Controller
The Z86E8316SSG can manage a basic audio-control function such as volume-button decoding, mute control, status reporting, or low-level digital signaling when the design does not require a high-performance audio converter. Its ADC may also be used for monitoring a control analog level, while the CPU handles debounce logic and interface commands. The 16 MHz clock and 4 KB OTP storage are adequate for simple supervisory tasks, but this is not a substitute for a dedicated audio codec or high-performance signal converter. Confirm pin multiplexing, timing margins, and ground-return practices in the manufacturer datasheet and the audio subsystem design guide.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E8316SSG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | Z86E8316SSC |
|---|---|---|
| Manufacturer | Zilog | Zilog |
| Package | 28-pin SOIC | 28-pin SOIC |
| Architecture | 8-bit Z8 register-to-register | 8-bit Z8 register-to-register |
| Maximum Clock Frequency | 16 MHz | 16 MHz |
| Program Memory | 4 KB OTP | 4 KB OTP |
| Analog-to-Digital Converter | Integrated ADC | Integrated ADC |
| Terminal Count | 28 | 28 |
主な差別化要因
- Verified pin-compatible configuration （vs Z86E8316SSC)
- Integrated analog conversion （vs Z86E8316SSC)
- Compact leaded-package implementation （vs Z86E8316SSC)
設計ノート
Treat the 4 KB OTP array as a one-time programming decision. Complete code review, peripheral configuration, and bootloader validation before the programming operation, because later corrections require replacing the device. If the product needs field-updatable firmware, last-minute sensor calibration, or customer-specific configuration changes, select a flash-memory MCU instead.
Use the manufacturer pin-description table when assigning every one of the 28 SOIC terminals; package position alone does not determine the function. Keep analog inputs away from switching-node and relay-drive traces, provide a short ground return for sensor references, and reserve programming, reset, and oscillator connections according to the reference design. Confirm that the PCB land pattern matches the 28-pin SOIC footprint before releasing artwork.
Estimated: at a 16 MHz operating clock, the signal period is 62.5 ns. Route the oscillator and sensitive analog paths away from high-current switching or relay-control nets, and use a continuous ground reference beneath signal routes where practical. These figures are timing and layout guidance derived from the stated clock frequency, not manufacturer layout specifications.
コンプライアンス情報
The device is identified as a commercial-temperature-grade microcontroller, but no specific RoHS, REACH, halogen-free, or conflict-minerals declaration was found in the product listings. AEC-Q100 qualification was not indicated.
