Z86E4312FSG - 12MHz 8-Bit MCU with 32 I/O | Zilog
部品番号: Z86E4312FSG ✓ 生産中Z86E4312FSG 概要
A microcontroller is a programmable semiconductor that combines a CPU core, nonvolatile program memory, volatile data memory, and peripherals on one integrated circuit. The Z8 family belongs to the 8-bit microcontroller hierarchy and provides a compact control platform for embedded products. Z86E4312FSG also supports EBI/EMI connectivity, Power-On Reset, and a Watchdog Timer, allowing it to supervise and control peripheral circuitry in compact industrial or consumer equipment.
The device provides 4 KB organized as 4K x 8 bits of OTP program memory and 236 x 8 bits of RAM. Its internal oscillator eliminates the need for an external clock source in designs that can use the specified operating frequency. The 32 I/O pins provide substantial parallel interface capacity, while the 3.5 V to 5.5 V operating range suits conventional 5 V embedded-control equipment. The 44-LQFP package also supports programmed and PCB-manufactured production methods.
The Z8 architecture targets straightforward embedded control, including digital input evaluation, output sequencing, timing, and communication. EBI/EMI connectivity expands the available interface options for external memory or related bus-connected functions. Power-On Reset establishes a controlled startup state, while the Watchdog Timer helps recover from unintended program stalls. These integrated resources reduce the number of external support components required for basic embedded-control designs.
Typical uses include industrial automation controllers, appliance-control modules, instrumentation interfaces, and compact consumer products. The 32 I/O pins are particularly useful for keypad scanning, display-control signals, relay or switch inputs, status indicators, and external bus connections. The internal oscillator makes the MCU appropriate for cost-sensitive systems where an accurate external time base is not required.
Designers should verify every electrical limit and pin function against the manufacturer datasheet before layout is released. OTP program memory is one-time programmable, so firmware validation must occur before programming. Decoupling, grounding, and exposed-pad layout should follow the datasheet recommendations. Because no verified pin names or detailed electrical limits were supplied, the package pinout and several implementation-specific values are intentionally left unresolved rather than guessed.
This page combines the verified 12 MHz, 4 KB OTP, 236 x 8-bit RAM, 32 I/O, supply-voltage, temperature, and 44-LQFP specifications with practical application guidance. It also distinguishes the verified same-family alternative and identifies where additional datasheet information is required for a production release.
ドロップイン代替品: Z86E4312FSG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: Z86E4312FSG （同一形状・フットプリント） — 相違点: Package.
Z86E4312ASG
✅ ドロップイン価格はお問い合わせください
データシートを見る →Z86E4312FSG 最大定格＆電気的特性
| Product Type | 8-bit microcontroller |
| Core Processor | Z8 |
| Maximum Operating Speed | 12 MHz |
| Program Memory Size | 4 KB (4K x 8 bits) |
| Program Memory Type | OTP |
| RAM Size | 236 x 8 bits |
| Number of I/O Pins | 32 pins |
| 動作電源電圧 | 3.5 V to 5.5 V |
| 動作温度 | 0°C to 70°C |
| Oscillator Type | Internal |
| パッケージ | 44-LQFP (10 x 10 mm) |
| 実装タイプ | Surface mount |
| Packaging | Tray |
| Connectivity | EBI/EMI |
| Peripherals | Power-On Reset (POR) and Watchdog Timer (WDT) |
| Process Technology | CMOS |
| Series | Z86E4312 |
| ライフサイクル状態 | Active |
Z86E4312FSG 44-lqfp (10 x 10 mm) ピン配置ガイド
Z86E4312FSG (44-lqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: Z86E4312FSG.
詳細は データシート をご参照ください。
主な用途
Z86E4312FSG の用途: 6 件s: Industrial Automation Controller, Appliance and Home-Control Module, Instrumentation and Signal Interface, Consumer Interface and Sequencing, Data Acquisition Front End, Networked Embedded Control Node.
Industrial Automation Controller
The Z86E4312FSG fits compact industrial automation controllers because it combines a 12 MHz Z8 core, 32 general-purpose I/O pins, 236 x 8 bits of RAM, and integrated Power-On Reset and Watchdog Timer functions. A designer can use the I/O pins for limit switches, status lamps, actuator commands, and machine-state inputs without requiring a large external peripheral set. The internal oscillator also reduces clock-component count. The device must remain within its specified 3.5 V to 5.5 V supply and 0°C to 70°C temperature range, so it is better suited to ordinary commercial factory equipment than extended-temperature machinery unless a wider-grade device is selected.
おすすめ
Appliance and Home-Control Module
The Z86E4312FSG is suitable for appliance and home-control modules because its 32 I/O pins can support keypads, display-control signals, relay drivers, appliance sensors, and status indicators. The 4 KB OTP program memory is sufficient for compact fixed-function control code, while 236 x 8 bits of RAM supports working variables and short data buffers. An internal oscillator avoids the need for a crystal in ordinary appliance controls. Because OTP firmware cannot be conventionally rewritten, engineers should validate the complete control logic before programming; field-reconfigurable products should instead use a flash-memory MCU.
おすすめ
Instrumentation and Signal Interface
The Z86E4312FSG can serve as the supervisory controller in compact instrumentation because it combines 32 I/O lines with EBI/EMI connectivity, POR, and a Watchdog Timer. It can coordinate sensor-enable signals, status indicators, relay logic, and external bus activity while executing control sequences at up to 12 MHz. The 3.5 V to 5.5 V supply range is compatible with conventional embedded logic, and the internal oscillator simplifies clocking for non-precision functions. However, the verified data does not identify specific analog converters or precision references, so accuracy-critical signal chains require separate, documented analog components and verified interface timing.
おすすめ
Consumer Interface and Sequencing
The Z86E4312FSG fits consumer-interface products requiring deterministic startup, modest computation, and multiple discrete signals. Power-On Reset establishes an initial operating state, while the Watchdog Timer helps recover from a stalled control routine. Its 32 I/O pins can manage pushbuttons, displays, indicators, relays, and external interface chips, and the 236 x 8 bits of RAM provides space for menu state and temporary data. The fixed OTP program is advantageous for cost-focused products that do not need updates, but it is a significant lifecycle limitation. Production firmware should therefore be validated under worst-case timing before programming any devices.
おすすめ
Data Acquisition Front End
The Z86E4312FSG can control a basic data-acquisition front end when the selected sensor interface operates at logic-compatible levels and does not require a higher-performance signal-processing core. Its 32 I/O pins allow selection and sequencing of multiple input channels, while POR and WDT support reliable subsystem startup and recovery. The 236 x 8 bits of RAM is suitable for short acquisition buffers and status variables, and EBI/EMI offers a route to external bus-connected components. The verified specifications do not include converter resolution, sample-rate limits, or analog input parameters, so precision measurement designs must add and validate a dedicated ADC rather than infer performance from the MCU specifications.
おすすめ
Networked Embedded Control Node
The Z86E4312FSG can be used in a compact embedded node that gathers local digital inputs, runs a control sequence, and communicates through an external bus or interface controller. Its EBI/EMI connectivity, 32 I/O pins, and internal oscillator provide a practical base for simple supervisory nodes, while POR and WDT improve recovery behavior. A network-specific transceiver or controller remains necessary because the verified data does not identify integrated Ethernet or wireless radio functions. Designers should also confirm bus timing and pin multiplexing against the manufacturer datasheet. This arrangement is most appropriate where fixed OTP firmware, a 3.5 V to 5.5 V supply, and commercial-temperature operation match the product requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: Z86E4312FSG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
Consider Z86E4312ASG only when its EPROM programming method and manufacturing flow are better suited to the product; verify its pin, timing, RAM, and temperature data before treating it as a drop-in substitute. Do not select this family for flash-reprogrammable firmware, extended-temperature environments, or applications requiring documented high-performance peripherals. If those requirements apply, move to a suitably qualified MCU rather than assuming a cross-brand or package-compatible replacement exists.
代替品との比較
| パラメータ | この製品 | Z86E4312ASG |
|---|---|---|
| Brand | Zilog | Zilog |
| Package | 44-LQFP (10 x 10 mm) | 44-LQFP (10 x 10 mm) |
| Core Processor | Z8, 8-bit | Z8, 8-bit |
| Maximum Speed | 12 MHz | 12 MHz |
| Program Memory Size | 4 KB (4K x 8 bits) | 4 KB |
| Program Memory Type | OTP | EPROM |
主な差別化要因
- Fixed-function OTP programming model （vs Z86E4312ASG)
- Verified 12 MHz performance in a 44-LQFP control device （vs Z86E4312ASG)
- 32 I/O pins with integrated control supervision （vs Z86E4312ASG)
設計ノート
The verified operating range is 3.5 V to 5.5 V, but individual power-pin limits and current consumption are not present in the supplied excerpts. Before schematic release, obtain the manufacturer datasheet and confirm the absolute maximum voltage, recommended operating conditions, and supply-current limits for every operating mode. Place the required input and output bypass capacitors at the package power pins using the datasheet's recommended values and layout. Because no verified pin map was supplied, capacitor locations must be checked against the actual pinout rather than inferred from package orientation.
Use the 44-LQFP 10 x 10 mm footprint from the manufacturer package drawing and verify whether its exposed thermal or thermal-pad connection is required. The verified excerpts identify the package size and pin count but do not provide pad dimensions, exposed-pad geometry, or a recommended land pattern. Do not infer those dimensions from a generic 44-LQFP library item. Confirm the pin-one orientation, courtyard, paste pattern, and exposed-pad connection directly from the Z86E4312FSG package drawing before releasing PCB artwork.
OTP program memory cannot be conventionally erased and rewritten like flash, so firmware validation must be completed before programming production units. Build a repeatable programming procedure that verifies the image, device identity, checksum, and intended configuration after programming. The alternative Z86E4312ASG uses EPROM according to the supplied comparison data, which can require different tooling and handling; do not treat OTP and EPROM devices as interchangeable merely because they share the Z86E4312 series name.
The internal oscillator reduces clock routing, but oscillator-based designs still require careful grounding and short supply paths. Keep the MCU ground return compact, route high-current outputs away from sensitive input nets, and maintain continuous ground references beneath the device where the package drawing permits. EBI/EMI signals should be routed according to the manufacturer's recommended interface topology rather than treated as general-purpose GPIO. Because verified pin names and alternate-function details are unavailable, the final netlist cannot be released until those functions are mapped from the manufacturer datasheet.
コンプライアンス情報
The verified excerpts do not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because this is an MCU rather than an automotive-qualified device; this status does not imply automotive qualification.
