New Products · 소싱 브리프

NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs

NXP introduces the FRDM-IMXRT1186 dev board with an 800 MHz Cortex-M7 and 300 MHz Cortex-M33 SoC, four Ethernet ports, and Arduino/FRDM expansion.

게시됨 업데이트됨 4 분 소요 ✓ AI 대응 공유

TL;DR — 세 문장

  • NXP launched the FRDM-IMXRT1186 dev board on the i.MX RT1186 crossover MCU for industrial automation, robotics, PLCs, and edge computing [S1].
  • The board pairs an 800 MHz Cortex-M7 application core with a 300 MHz Cortex-M33 control core in the MIMXRT1186CVJ8C SoC [S1].
  • Connectivity includes two Gigabit Ethernet (TSN) ports, two Fast Ethernet ports for EtherCAT or TSN, USB Type-C OTG, and a CAN transceiver [S1].

출처: key_takeaways (실제 필드, 최대 3개 항목). 사실과 분석은 별도로 표시됩니다.

NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs — New Products news briefEditorial cover for a New Products brief. Chip motif; headline "NXP FRDM-IMXRT1186 board brings i.MX RT1186 crossover MCU to industrial and edge designs". Reported key numbers: 800 MHz; 300 MHz; 64 Mbit. 1 cited source. Static cover (no animation).NEW PRODUCTS · NEWS BRIEFNXP FRDM-IMXRT1186 board brings i.MX RT1186crossover MCU to industrial and edge designsREPORTED KEY NUMBERS800 MHz300 MHz64 Mbit1 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

AI 답변을 통해 오셨습니다 — 이것은 검증 가능한 원문입니다

AI 요약은 주장의 근거를 누락했을 수 있습니다. 원래 예측, 영향받는 부품 및 모든 인용은 이 페이지에 있으며 각각 출처로 추적할 수 있습니다.

XAIPART 예측

이 브리프에는 반증 가능한 예측이 포함되어 있습니다.

영향받는 부품

이 기사에 대한 카탈로그 일치가 없습니다 — 일치를 추론하지 않고 아무것도 표시하지 않습니다.

Reported by CNX-Software on 2026-09-29. Summarized and analyzed by XAIPART Editorial.

What happened

NXP has launched the FRDM-IMXRT1186, a development board built around the i.MX RT1186 crossover MCU and aimed at industrial automation, robotics, PLCs, and edge computing applications.S1 According to the source, the MCU uses a heterogeneous architecture with an 800 MHz Arm Cortex-M7 core for application processing and a 300 MHz Arm Cortex-M33 core for real-time control and communications.S1

The board is said to include 64 Mbit HyperRAM, 512 Mbit HyperFlash, and 128 Mbit QSPI Flash for external memory.S1 For wired connectivity, the FRDM-IMXRT1186 carries two Gigabit Ethernet ports for TSN switching and two Fast Ethernet ports usable for EtherCAT or TSN switching, plus a USB Type-C OTG port and a CAN transceiver.S1 Debugging is handled through an on-board MCU-Link debugger and a JTAG connector.S1

The board is also reported to expose Arduino UNO R3 and FRDM headers, a FlexSPI follower header, an SRAMC header, and motor-control headers for expansion.S1 The SoC on the board is identified as the NXP MIMXRT1186CVJ8C in the i.MX RT1180 family, in an LFBGA196 package.S1

Key numbers
MetricReported valueSource
SoCNXP MIMXRT1186CVJ8C (i.MX RT1180 family, LFBGA196)[S1]
Cortex-M7 application core frequency800 MHz[S1]
Cortex-M33 control core frequency300 MHz[S1]
HyperRAM64 Mbit[S1]
HyperFlash512 Mbit[S1]
QSPI Flash128 Mbit[S1]
Gigabit Ethernet ports (TSN)2[S1]
Fast Ethernet ports (EtherCAT / TSN)2[S1]
List price / availabilityNot disclosed[S1]

Background timeline

  1. - NXP launches the FRDM-IMXRT1186 development board with the i.MX RT1186 crossover MCU, four Ethernet ports, HyperRAM/HyperFlash/QSPI storage and Arduino UNO R3 plus FRDM headers, targeting industrial automation, robotics, PLCs, and edge computing [S1].

XAIPART take

Technical impact

The dual-core split of an 800 MHz Cortex-M7 alongside a 300 MHz Cortex-M33 inside one package lets designers run an application stack and a determinist real-time loop on the same silicon, which can reduce the bill of materials when a separate MCU pair would otherwise be needed. Four Ethernet ports, including two Gigabit-capable TSN lanes and two Fast Ethernet lanes that can carry EtherCAT, allow the same board to bridge higher-level edge workloads and fieldbus-grade motion networks.XAIPART analysis

Market impact

The combination of TSN support and EtherCAT-capable Fast Ethernet ports positions the FRDM-IMXRT1186 against current industrial control dev kits, where designs often split a Linux-class processor and a dedicated real-time MCU. For sourcing teams, an FRDM board in the i.MX RT1180 family is normally a lead-time-friendly way to validate the part before committing to a custom carrier, and the MIMXRT1186CVJ8C part number should be qualified against any approved-vendor list for the eventual production MCU.XAIPART analysis

Action

Design engineers evaluating industrial PLC or motion prototypes should run a BOM trade-off study that compares the i.MX RT1186 against the existing MCU + companion-realtime-processor architecture; if feasibility checks pass, request a sample of the MIMXRT1186CVJ8C and confirm HyperFlash (512 Mbit) and HyperRAM (64 Mbit) lifecycle status with NXP. Buyers should add the FRDM-IMXRT1186 to the eval-kit shortlist and confirm distributor stock and lead time for the i.MX RT1186 before locking production schedules.XAIPART analysis

XAIPART Forecast

XAIPART expects that within 12 months of the NXP FRDM-IMXRT1186 launch, at least three competing crossover-MCU dev boards in the same industrial / edge segment will publish reference designs quoting a sub-300 MHz real-time core alongside a Gigabit Ethernet TSN switch; if no such competitor board ships reference designs publicly by Q4 2027, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. The source did not disclose list price, distributor stocking, or production lead time for the FRDM-IMXRT1186, so any sourcing timing assumption is single-source and unconfirmed.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

대체품 및 수명 주기

등록된 대체품 — 카탈로그 범위이며 시장 순위가 아닙니다
부품관계수명 주기근거
— 등록된 대체품 없음 데이터 필요 — 요구 사항 match_type 어떤 전임자 라벨이 표시되기 전에

"전임자" 및 "대체품" 라벨은 기록된 일치 유형, 수명 주기 상태 또는 출처 텍스트에서만 부여됩니다. 일치가 기록되지 않은 경우 라벨이 표시되지 않습니다. 당사 자체 등록 상품은 시장 기준이 아닙니다.

주시할 사항

반증 가능한 예측 — 임계값, 기간 및 현재 상태. 반증된 예측도 계속 표시됩니다.
주장임계값작성:상태
XAIPART expects that within 12 months of the NXP FRDM-IMXRT1186 launch, at least three competing crossover-MCU dev boards in the same industrial / edge segment will publish reference designs quoting a sub-300 MHz real... no such competitor board ships reference designs publicly by Q4 2027 Q4 2027 Pending

잘못된 예측도 계속 표시하고 표시를 남깁니다. 삭제하지 않습니다.

영향받는 부품

카탈로그 일치 없음. 이 보도는 현재 XAIPART에 등록된 어떤 부품과도 매핑되지 않습니다. 일치를 추론하지 않으며 자리 표시자 목록도 표시하지 않습니다.

차원별 비용 압력

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.2546, neutral. Composite index -9.1, band neutral.0Input costno readingSupply/demandz −1.4711 · notable46 dFX & energyz +0.2546 · neutral5 dcomposite −9.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

이 콘텐츠의 제작 방식

프로세스 증거 — 수집, 출처 온전성, 모델 및 게이트
이 브리프의 감사 추적
Source fetched CNX-Software · www.cnx-software.com · 2,098 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 6,695 tokens · 26.4s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.175439 · C10 rounds 0
Time contract 1 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

위의 모든 행은 파이프라인에서 생성되며 수작업으로 작성되지 않습니다.

편집 점수

결정론적 게이트 결과 — 순수 PHP로 판정에 모델이 관여하지 않음
게이트 점수 분석 6 적용 가능한 검사, 6항목 통과: 100 %. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6962. 적용 가능한 검사 통과 6 / 6 = 100% · 판정: hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6962 게시 여부는 게이트가 결정합니다. 독립 감사 점수는 권고용일 뿐입니다.
오류를 발견하셨습니까? 잘못된 점을 알려 주십시오 — 정정 사항은 원문과 함께 게시되고 기록됩니다. 기사를 조용히 수정하지 않습니다.

댓글

첫 번째 댓글을 남겨 보십시오.

출처

  1. NXP FRDM-IMXRT1186 development board features i.MX RT1186 crossover MCU, four Ethernet ports — https://www.cnx-software.com/2026/09/29/nxp-frdm-imxrt1186-development-board-features-i-mx-rt1186-crossover-mcu-four-ethernet-ports/ · rss · 조회일

사실은 S1/S2로 표시되며 링크된 출처로 추적됩니다. 다음 라벨이 붙은 구절은 분석 는 보도된 사실과 분리되어 유지되는 XAIPART의 자체 추론입니다. 출처 링크는 추정하지 않고 실제로 확인합니다. nofollow — 출처 표기는 의도적입니다.