집적 회로

PIC16C711T-20I/SS

PIC16C711T-20I/SS - 8-bit OTP MCU, 1.75KB, 13 I/O, 20MHz SSOP-20 | Industrial

The Microchip PIC16C711T-20I/SS is an 8-bit, OTP-based CMOS microcontroller in the PIC16CXX mid-range family, offering 1.75KB of program memory (organized as 1K x 14), 68 bytes of RAM, 13 general-purpose digital I/O pins, and an integrated 8-bit A/D converter with four input channels. The device operates from a 4V to 6V input rail (typical 5V), executes instructions in 200 ns at 20 MHz, and is housed in a 20-pin SSOP (209 mil) surface-mount package supplied on Tape & Reel. What is an OTP microcontroller? An OTP (One-Time Programmable) microcontroller is a class of MCU whose program memory is implemented as factory-or-user-programmable EPROM cells that can be written exactly once and cannot be electrically erased. OTP MCUs belong to the legacy MCU hierarchy MCU -> microcontroller -> embedded controller -> semiconductor, and they sit between mask-ROM MCUs (cheapest at high volume) and Flash MCUs (most flexible). The PIC16C711 series was designed for cost-sensitive, low-to-medium volume production where the simplicity of a 35-instruction RISC core outweighs the lack of in-circuit reprogrammability. Key features of the PIC16C711T-20I/SS are its 200 ns instruction cycle, 4-channel 8-bit ADC with selectable reference, brown-out reset circuitry, a 15-bit programmable prescaler, one 8-bit and one 16-bit timer/counter, and a wide 4.0V to 6.0V operating range. The PIC RISC architecture delivers deterministic interrupt latency and Harvard bus structure for simultaneous instruction fetch and data access, while the industrial temperature grade (-40C to +85C) supports harsh-environment deployment. Architecturally, the PIC16C711T-20I/SS uses a 14-bit instruction word with an 8-bit data path, a hardware multiplier-free ALU, and a two-stack-deep return address register. The integrated ADC samples through successive approximation with an acquisition time that is user-programmable, and the analog reference can be sourced from the supply rail or an external pin for ratiometric measurements. Typical applications include industrial sensor signal conditioning, motor and valve control loops, consumer appliance controllers, automotive body electronics (where the automotive -I suffix grade is not used; the part is industrial-grade only), and low-cost white-goods user interfaces. Designers favor the PIC16C711 family for its predictable interrupt behaviour, breadboard-friendly SSOP-20 footprint, and Microchip's free MPLAB development toolchain. A newer Flash-based drop-in replacement, the PIC16F716, is recommended for new designs per the manufacturer's product page; the PIC16C711T-20I/SS remains stocked for legacy and long-life programs. When designing with this part, observe the 4V minimum Vdd for guaranteed ADC accuracy, place a 100 nF ceramic bypass capacitor within 5 mm of Vdd/Vss, and reserve pin 1 (MCLR/Vpp) for the high-voltage programming signal - tying it directly to Vdd disables in-circuit programming. OTP parts cannot be re-programmed, so prototype and verify on a Flash equivalent before committing to OTP volume orders. As of 2026-09-18 the LCSC distributor lists it from $1.46 in stock. This page synthesizes verified distributor pricing, same-family drop-in alternatives, and pin/package design notes not found on the manufacturer product page alone.

견적 요청 문의하기

PIC16C712-04/SO

PIC16C712-04/SO - 8-bit 4MHz OTP MCU 1.75KB | Microchip

The Microchip Technology PIC16C712-04/SO is an 8-bit CMOS OTP-based microcontroller built on the PIC16C architecture, delivering 4 MHz (200 ns instruction cycle) performance in an 18-pin SOIC package. According to the Microchip product page, the device integrates 1.75 KB of OTP program memory (1K x 14 words), 128 bytes of RAM, and 13 general-purpose I/O pins, plus a 4-channel 8-bit Analog-to-Digital Converter (ADC), two timers, and a Capture/Compare/PWM (CCP) module for advanced control tasks. The -04 speed suffix denotes a 4 MHz oscillator maximum at the commercial operating range, while the /SO suffix indicates the 7.50 mm-width 18-SOIC gull-wing surface-mount package supplied in tube packaging. The PIC16C712 is upward code-compatible with the PIC16C5X and PIC12CXXX families, retaining the well-known 35-instruction RISC instruction set that simplifies migration across PIC mid-range designs. What is a PIC16C OTP microcontroller? An OTP (One-Time-Programmable) microcontroller is a microcontroller whose program memory can be written exactly once after manufacture, using a device programmer. OTP parts sit between mask-ROM devices (cheapest at high volume but fixed at the fab) and Flash-based MCUs (re-programmable many times). They are typically chosen for cost-sensitive, high-volume, mature products where firmware is stable and re-programmability is not required. OTP MCUs share the same instruction set, peripherals, and development tools (MPLAB XC8, ICD programmers) as their Flash siblings, enabling engineers to prototype on Flash parts and ship on OTP parts. Key features of the PIC16C712 include: 4 MHz maximum operating frequency (200 ns instruction cycle), 1.75 KB OTP program memory, 128 bytes of data RAM, 13 digital I/O pins with individual direction control, 4-channel 8-bit ADC, two 8-bit timers (Timer0 and Timer2) plus one 16-bit timer (Timer1), one Capture/Compare/PWM module, a watchdog timer with its own on-chip RC oscillator, and an operating voltage range of 2.5 V to 5.5 V (industrial variants). The 8-bit RISC Harvard architecture executes one instruction per cycle, giving deterministic timing suitable for real-time control. Programmable code protection, power-on reset, brown-out detection (on selected variants), and an in-circuit serial programming (ICSP) interface simplify end-of-line firmware updates during production. Typical applications include white-goods and appliance control, automotive body and sensor modules, industrial sensor interfaces, low-end motor control loops with CCP-driven PWM, simple closed-loop thermostats, and consumer electronic subsystems. The CCP module plus 4-channel ADC makes the PIC16C712 well suited to mixed analog/digital control tasks in cost-sensitive products. When laying out the board, place a 100 nF decoupling capacitor within 5 mm of VDD, route the 4 MHz crystal traces as short as possible with grounded guard rings, and reserve the MCLR pin for an in-system programming header. Note that OTP memory cannot be erased, so production firmware must be fully verified before programming.

견적 요청 문의하기

PIC16C712-04/SS

PIC16C712-04/SS - 4MHz 8-Bit OTP MCU with 8-bit ADC | Microchip

The Microchip Technology PIC16C712-04/SS is an 8-bit CMOS RISC microcontroller with One-Time-Programmable (OTP) EPROM, 4 MHz maximum clock speed, 1.75 KB program memory, 128 bytes RAM, and a 4-channel 8-bit Analog-to-Digital converter with Capture/Compare/PWM, housed in a 20-pin SSOP package. The "-04" suffix indicates the 4 MHz speed grade, and "/SS" designates the SSOP-20 surface-mount package for commercial temperature grade (0C to +70C). The PIC16C712 is pin-compatible with the PIC16C71x family and shares the same RISC-based PIC16 architecture as older PIC16Cxx devices. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (program + data), peripherals (timers, ADC, communication), and I/O pins on one IC. The PIC16C712 belongs to the PIC16 mid-range family — a category of 8-bit RISC microcontrollers from Microchip Technology widely used in embedded control. Within the broader taxonomy it sits as: microcontroller -> 8-bit MCU -> PIC16 mid-range -> PIC16C71x sub-family. RISC architecture, OTP memory and integrated ADC make this category the workhorse for cost-sensitive, low-volume embedded designs. Key features of the PIC16C712 include: 13 I/O pins (one input-only), four interrupt sources, two 8-bit timers (Timer0, Timer2) plus one 16-bit timer (Timer1) with capture, a 4-channel 8-bit ADC, and a Capture/Compare/PWM module. The Harvard memory architecture separates program (1.75 KB EPROM) and data (128 B SRAM) buses to allow simultaneous instruction fetch and operand access, improving throughput vs. von-Neumann CISC 8-bit MCUs of the same vintage. The PIC16C712 uses a 14-bit wide instruction word with 35 single-cycle opcodes, delivering 4 MIPS at 4 MHz. Internal RC oscillator and external crystal/RC modes are supported. The 8-bit successive-approximation ADC shares pins with digital I/O and has its own reference inputs (VREF+/VRREF-). Brown-out Reset, Power-on Reset, Watchdog Timer with on-chip RC oscillator, and code protection protect firmware in noisy industrial environments. Typical applications include industrial appliance control, automotive subsystems (HVAC, lighting, instrument clusters), consumer products, and analog-signal-conditioning front-ends where the integrated ADC eliminates an external converter. Designers choose the PIC16C712 for cost-sensitive production runs where OTP programming is acceptable. When designing with this device, account for OTP memory — firmware cannot be updated in the field. Engineers developing prototypes should use the PIC16F712 flash variant for iteration, then migrate the validated firmware to the PIC16C712 for low-cost production. The 4 MHz speed grade supports instruction execution up to 1 us per instruction. This page synthesizes distributor pricing, cross-reference data, and design notes that are not aggregated in any single manufacturer or distributor source, giving engineers a single reference for evaluating drop-in substitutes and lifecycle risk.

견적 요청 문의하기

PIC16C712-04E/P

PIC16C712-04E/P - 8-Bit 4MHz OTP MCU, 1.75KB, 18-DIP | Microchip

The Microchip Technology PIC16C712-04E/P is an 8-bit CMOS microcontroller based on the high-performance RISC architecture, featuring 1.75KB (1K x 14) of One-Time-Programmable (OTP) program memory and packaged in an 18-pin PDIP through-hole form factor. The device operates at up to 4 MHz clock input with a 200 ns instruction cycle, includes 4 channels of 8-bit Analog-to-Digital (A/D) converter, 128 bytes of RAM, 2 additional timers, and a Capture/Compare/PWM (CCP) peripheral, making it suitable for advanced A/D applications. An 8-bit microcontroller is a microprocessor integrated with program memory, data memory, I/O peripherals, and a CPU on a single silicon die, optimized for embedded control tasks. Within the semiconductor taxonomy, it falls under microcontroller -> embedded processor -> integrated circuit. The PIC16C7xx family specifically targets applications that require on-chip analog conversion and PWM generation, eliminating the need for external ADC or timer ICs in cost-sensitive industrial, automotive, appliance, and consumer designs. Key differentiating specifications include the 35-instruction RISC instruction set (all single-cycle except program branches), the integrated 8-bit ADC with 4 input channels, the CCP module supporting PWM generation for motor and lighting control, and the wide operating voltage range of 2.5V to 5.5V with automotive temperature grade support (-40C to +125C). The device also integrates a Watchdog Timer with its own on-chip RC oscillator for reliable operation in noisy environments. The PIC16C712-04E/P is fabricated in CMOS technology, offering low power consumption with standby currents below 1 microamp. Its Harvard architecture separates program and data buses, enabling simultaneous instruction fetch and data access, which is why a 4 MHz oscillator can execute instructions in 200 ns. The device supports in-circuit serial programming (ICSP) via two pins, enabling firmware updates after PCB assembly. Typical applications include automotive sensor interfacing, industrial process control, appliance motor control (washing machines, HVAC fans), consumer white goods, and low-cost data acquisition systems. The 'E' suffix denotes the extended automotive temperature grade of -40C to +125C, while the '04' speed grade indicates 4 MHz maximum operation, and '/P' designates the PDIP package. When designing with this device, ensure that the MCLR pin is properly pulled high through a resistor and that the decoupling capacitor on VDD is placed within 0.25 inches of the supply pin. The OTP memory can be programmed only once, so consider using the PIC16F712 (Flash-based equivalent) for prototypes or production runs that require firmware updates.

견적 요청 문의하기

PIC16C712-04E/SO

PIC16C712-04E/SO - 8-Bit CMOS MCU, 4MHz, 1.75KB OTP, 18-SOIC | Microchip

The Microchip Technology PIC16C712-04E/SO is an 8-bit CMOS RISC microcontroller housed in an 18-pin SOIC package, featuring 4 MHz maximum clock input, 1.75 KB (1K x 14) One-Time-Programmable (OTP) program memory, 128 bytes of RAM, and 4 channels of 8-bit Analog-to-Digital conversion. An 8-bit microcontroller is a small, self-contained computer-on-a-chip that integrates a CPU, non-volatile program memory (ROM/EPROM/Flash/OTP), volatile working memory (RAM), and programmable I/O peripherals into a single IC. MCUs belong to the broader category of microcontrollers -> embedded processors -> digital ICs -> semiconductors, and they sit hierarchically below microprocessors in compute capability but above simple logic ICs in system-level integration. The PIC16C712 belongs to Microchip's mid-range PIC16 family, originally based on OTP EPROM technology (the "C" in the part number denotes the CMOS OTP/EPROM-based product line, now superseded by Flash-based PIC16F equivalents). Key features of the PIC16C712-04E/SO include 35 single-word instructions (all single-cycle except program branches which take two cycles), an instruction cycle of 200 ns at 20 MHz (200 ns at 4 MHz), eight-level deep hardware stack, 13 interrupt sources, four 8-bit A/D input channels, one 16-bit Capture/Compare/PWM (CCP) module plus one 8-bit timer/counter, and a 5V operating voltage range. The "-04E" speed/temperature suffix indicates 4 MHz maximum clock and the "E" (Extended) temperature grade of -40C to +125C; "/SO" designates the 18-lead Small-Outline IC (SOIC) package shipped in tube packaging. Architecturally, the PIC16C712 uses a Harvard RISC design with separate program and data buses, an 8-bit ALU, and direct/indirect addressing modes. The OTP program memory uses EPROM cells - one-time programmable via UV erase window or production programmer - which historically made the PIC16C712 attractive for low-volume production runs where mask-ROM tooling costs were uneconomical. Typical applications include automotive body controllers, industrial sensor interfaces, low-end consumer appliances, hobby/educational projects, and replacement of legacy 8051 designs. The wide -40C to +125C extended temperature range makes the "E" suffix variants particularly suitable for under-hood automotive and outdoor industrial environments. When designing with this device, note that OTP memory cannot be re-programmed in-circuit: firmware must be finalized before production programming. Engineers targeting in-field firmware updates should migrate to the Flash-based PIC16F712 drop-in equivalent. This page synthesizes distributor pricing, drop-in PIC16F alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C712-04I/P

PIC16C712-04I/P - 8-bit 4MHz OTP MCU with ADC, 18-PDIP | Microchip

The Microchip Technology PIC16C712-04I/P is an 8-bit CMOS OTP (one-time programmable) RISC microcontroller featuring a 4 MHz maximum clock input, 1.75 KB (1K x 14) of program EPROM, 128 bytes of data RAM, and a 4-channel 8-bit analog-to-digital converter, all housed in a through-hole 18-pin PDIP package. As an industrial-temperature-grade ("I") variant, this IC supports an operating temperature range of -40 °C to +85 °C and is designed for embedded applications requiring compact code footprint and reliable analog acquisition. What is an OTP microcontroller? An OTP (one-time programmable) microcontroller is a type of embedded processor whose on-chip non-volatile program memory can be written exactly once during production programming, after which the code becomes permanent. OTP sits within the broader microcontroller taxonomy: microcontroller -> embedded processor -> CMOS IC -> semiconductor device. OTP parts are typically chosen over flash-based MCUs when unit cost is paramount and firmware is fully matured, such as in high-volume appliance, sensor, and toy controllers. Key features include 13 digital I/O pins with individual direction control, an 8-bit Timer0 with 8-bit prescaler, a Capture/Compare/PWM (CCP) module, brown-out reset (BOR) circuitry, a watchdog timer, and an interrupt controller supporting up to seven internal/external sources. The PIC16C712 executes instructions in a single instruction cycle (4 clock periods) except for program branches, which take two cycles, yielding 200 ns instruction execution at 20 MHz. The PIC16C712 architecture uses a Harvard-style RISC core with only 35 single-word instructions to learn, dramatically reducing code development time. Its CMOS process yields very low power consumption suitable for battery-powered applications, and the on-chip ADC provides a low-cost analog interface for sensor reading without an external converter IC. Typical applications include appliance control boards, sensor signal conditioning, simple motor control via the CCP/PWM module, battery chargers, security keypads, and industrial sensor interfaces. The 4-channel ADC and 13 I/O lines make this device particularly well suited to low-cost mixed-signal front ends. When designing with the PIC16C712, mind that the OTP memory cannot be re-programmed in-circuit - choose the flash-based PIC16F7X family if in-field firmware updates are required. The PIC16C712 is well supported by MPLAB X IDE and the MPLAB XC8 C compiler for both assembly and C code development. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not consolidated in any single manufacturer or distributor source.

견적 요청 문의하기

PIC16C712-04I/SO

PIC16C712-04I/SO - 8-bit OTP MCU 1.75KB 4MHz 18-SOIC | Microchip

The Microchip Technology PIC16C712-04I/SO is an 8-bit CMOS OTP-based PIC microcontroller running at up to 4 MHz, integrating 1.75 KB (1K x 14) of one-time-programmable program memory, 128 bytes of RAM, and 13 digital I/O pins in an 18-pin SOIC (SO) wide-body package. It belongs to the PIC16C7xx family and combines a RISC CPU with 4 channels of 8-bit A/D conversion, two additional timers, and a Capture/Compare/PWM (CCP) module. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program + data), and programmable peripherals. MCUs form the lowest tier of the embedded computing hierarchy: microcontroller -> embedded processor -> system-on-chip (SoC) -> computer. The PIC16C712 specifically uses a Harvard-architecture 8-bit RISC core, executing most instructions in a single 200 ns cycle, which simplifies deterministic real-time control code. Key features include 4 channels of 8-bit A/D with input multiplexing, two 8-bit timers plus one 16-bit timer, a CCP module for PWM and measurement tasks, an internal oscillator option, and a wide 4.0 V to 5.5 V supply range with industrial-grade -40C to +85C operation. The 13 I/O pins are 5 V tolerant and source/sink up to 25 mA each, enough to drive LEDs or small relays directly. The architecture uses a 14-bit instruction word and a separate 8-bit data path, giving the C712 code-space efficiency advantages over 8-bit cores with 12-bit instructions. The integrated ADC with 8-bit resolution and the CCP PWM channel allow direct sensor readout and actuator drive without external glue logic, while the OTP program memory keeps unit cost low for high-volume production. Typical applications include automotive body and appliance controllers, industrial sensor interfaces, white-goods and HVAC control boards, simple closed-loop fan or pump controllers, and consumer products requiring a low-cost programmable logic replacement. The 18-SOIC wide-body package is hand-solder friendly and well suited to through-hole-adapter prototypes. When designing with this part, note that OTP memory is one-time programmable - firmware must be fully validated in flash-based development parts (PIC16F712) before committing to the OTP die. Always reserve the MCLR pin configuration and ensure decoupling capacitors are placed within 5 mm of VDD/VSS for ADC noise immunity. This page synthesizes distributor pricing, package-pinned drop-in alternatives, and application design notes - information not aggregated on any single manufacturer or distributor page.

견적 요청 문의하기

PIC16C712-20/P

PIC16C712-20/P - 8-Bit OTP MCU, 20MHz, 1.75KB | Microchip

The Microchip PIC16C712-20/P is an 8-bit RISC-based CMOS microcontroller from the PIC® 16C family, offering 20MHz maximum operating frequency, 1.75KB (1K x 14) of One-Time-Programmable (OTP) program memory and 128 bytes of RAM, housed in an 18-pin PDIP through-hole package. The '-20' suffix denotes the 20MHz speed grade while the '/P' suffix indicates the plastic DIP package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory and programmable I/O peripherals around an 8-bit data bus. Within the semiconductor hierarchy, an MCU sits under microprocessor -> microcontroller -> embedded controller. The PIC16C712 belongs to the PIC16C7xx mid-range family, which adds an integrated 8-bit Analog-to-Digital Converter (ADC) and a Capture/Compare/PWM (CCP) module to the baseline PIC16Cxxx core. Key features include 13 digital I/O pins, 4 channels of 8-bit ADC with up to 8 external input channels (some shared with digital I/O), a 16-bit timer/counter with capture, compare and PWM capability, an 8-bit timer/counter, a programmable code protection bit, and a wide operating voltage range of 2.5V to 6.0V. The device also supports in-circuit serial programming (ICSP) for production line updates despite being OTP, plus a watchdog timer for enhanced reliability in unattended applications. The PIC16C712 architecture uses a Harvard-design RISC core with 35 single-cycle instructions, delivering near-1 MIPS/MHz performance. The integrated ADC uses successive approximation, while the CCP module supports PWM, capture and compare modes for motor control and signal measurement. Power management features include low-power sleep mode and a programmable brown-out reset. Typical applications include automotive sensor interfaces, industrial control loops, white-goods appliance controllers and consumer electronics with embedded analog sensing. The ADC simplifies designs where these decisions involve temperature, voltage or current monitoring without an external converter. When designing with this device, ensure the oscillator configuration matches the application: an external crystal is required for precise timing, while the internal RC option reduces BOM cost. OTP memory requires masked programming at production; prototype with the JW windowed variant and migrate to PIC16C712-20/P for volume.

견적 요청 문의하기

PIC16C712-20E/SO

PIC16C712-20E/SO - 8-bit 20MHz OTP MCU 18-SOIC | Microchip

The Microchip Technology PIC16C712-20E/SO is an 8-bit CMOS OTP (One-Time-Programmable) RISC microcontroller in a 18-pin SOIC package, operating at 20 MHz with 200 ns instruction cycle. It integrates 1.75 KB (1K x 14) of OTP program memory, 128 bytes of RAM, 4 channels of 8-bit Analog-to-Digital conversion, a Capture/Compare/PWM (CCP) module, and two additional 8-bit timers (Timer0 + Timer2) plus a 16-bit Timer1. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory, RAM, and integrated peripherals such as timers, ADCs, and communication interfaces. MCUs sit at the lowest layer of embedded computing hierarchy: MCU -> embedded controller -> embedded system -> IoT device. The PIC16C712 belongs to the PIC16 mid-range family, one of the most widely deployed 8-bit cores in industrial, automotive, and consumer embedded designs due to its compact instruction set, deterministic timing, and broad peripheral integration. Key features include 35 single-word instructions, all single-cycle except program branches (two cycles), 8-level hardware stack, 13 I/O pins with individual direction control, in-circuit serial programming (ICSP) capability, and a wide 2.5V to 6.0V operating voltage. The on-chip 8-bit ADC with 4 input channels eliminates external converter cost in sensor-interface applications, while the CCP module supports PWM motor control and periodic-event capture. Architecturally, the PIC16C712 uses a Harvard RISC core with separate program and data buses. The 14-bit-wide instruction word allows most operations to execute in a single instruction cycle, achieving 5 MIPS at 20 MHz. The 'E' suffix denotes the extended industrial temperature grade (-40C to +125C), and '20' specifies the 20 MHz maximum clock. The 'SO' suffix denotes the 18-lead Small-Outline IC package supplied in tube. Typical applications include automotive sensor interfaces, HVAC damper control, white-goods appliance controllers, battery chargers, simple motor drives (fans, pumps), and low-end consumer products requiring analog sensing plus deterministic digital I/O. The integrated ADC and PWM make it especially attractive for closed-loop feedback control. When designing, observe the OTP-programmed nature: code cannot be changed after programming. Plan for prototype validation on a windowed (JW) or flash-based PIC16F equivalent before committing to OTP volume production. The 18-SOIC package has a typical theta_JA of approximately 75 C/W, providing adequate thermal margin for normal industrial environments. This page synthesizes current distributor pricing, drop-in same-package alternatives, and practical design notes not found in the bare manufacturer datasheet, giving engineers a one-stop view for sourcing and replacement decisions.

견적 요청 문의하기

PIC16C712-20E/SS

PIC16C712-20E/SS - 8-Bit 20MHz MCU 1.75KB OTP 20-SSOP | Microchip

The Microchip Technology PIC16C712-20E/SS is an 8-bit RISC microcontroller based on the PIC16C core, featuring a 20 MHz maximum clock speed, 1.75 KB (1K x 14) of One-Time-Programmable (OTP) program memory, 128 bytes of RAM, and 13 I/O lines, all housed in a 20-pin SSOP package with an extended automotive temperature grade. The 'E' suffix designates the -40C to +125C operating range while the 'SS' package code denotes the 5.30 mm body Shrink Small Outline Package. What is a PIC16C 8-bit microcontroller? The PIC16C family from Microchip Technology is a CMOS OTP-based 8-bit microcontroller family built on the PIC (Peripheral Interface Controller) RISC architecture. Within the broader microcontroller taxonomy, a PIC16C sits between PIC10/12/16 baseline devices and the PIC17/18 high-performance series. It executes one instruction per 200 ns cycle at 20 MHz and supports only 35 single-word instructions, making it easy to program and well suited for cost-sensitive real-time control. Key features of the PIC16C712-20E/SS include four channels of 8-bit Analog-to-Digital conversion, two additional timers beyond the base PIC16C, a Capture/Compare/PWM (CCP) peripheral for waveform generation, a watchdog timer for safety, and an internal RC oscillator option. The 13 I/O lines share peripherals through Microchip's standard pin-mapping scheme. The OTP program memory is one-time programmable, which makes this part attractive for low-cost mass production rather than field-reprogrammable designs. The PIC16C712-20E/SS executes 200 ns instructions at 20 MHz and uses a Harvard-style architecture with separate program and data buses. The 8-bit ALU, 14-bit instruction word, and 8-level hardware stack simplify C and assembly development. The 8-bit ADC can convert at approximately 20 kSPS depending on clock source, and the CCP module supports PWM frequencies up to about 10 kHz at 8-bit resolution, which is sufficient for motor control and lighting dimming. Typical applications include automotive body electronics, white-goods appliance controls, simple sensor conditioning loops, and industrial sensor interfaces. Its small footprint, integrated ADC, and PWM make it well suited for applications where the engineer wants to consolidate analog sensing and digital control in a single chip without the cost of an external ADC. Designers should note that the OTP memory cannot be reprogrammed in-circuit; for development, choose the PIC16F712 (Flash-based) variant. Always bypass VDD with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and keep the MCLR pin configuration consistent with the in-circuit serial programming (ICSP) header if firmware updates are required in production. This page consolidates distributor pricing, drop-in alternative MPNs, and practical design notes that are not always available on the manufacturer datasheet, giving embedded engineers a single source for the PIC16C712-20E/SS specification and replacement decision.

견적 요청 문의하기

PIC16C712-20I/P

PIC16C712-20I/P - 8-bit 20MHz OTP MCU with 4-ch ADC | Microchip

The Microchip PIC16C712-20I/P is an 8-bit CMOS OTP-based microcontroller in the PIC16C family, housed in an 18-pin PDIP (P) through-hole package and rated for the industrial temperature range (-40C to +85C). It executes instructions in 200 ns at a 20 MHz clock speed and features 1.75 KB (1K x 14) of OTP program memory, 128 bytes of RAM, 13 digital I/O pins, and a 4-channel 8-bit Analog-to-Digital Converter. The device includes two timers plus a Capture/Compare/PWM (CCP) module. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (ROM/Flash/OTP), data memory (RAM), and programmable peripherals. MCUs are the central building blocks of embedded systems, used wherever sensors must be read, actuators must be controlled, or communication protocols must be managed. The PIC16C712 sits within the broader hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Its OTP (One-Time Programmable) program memory makes it suited for low-cost, high-volume production where firmware is finalized before manufacturing. Key features of the PIC16C712-20I/P include a 35-instruction RISC architecture with all single-cycle except program branches (2 cycles), an operating voltage range of 4.0 V to 6.0 V, low-power operation, and a hardware USART for serial communication. The 8-bit ADC supports up to 4 channels for direct sensor interfacing. The CCP module enables PWM generation for motor speed control, dimming, and timing applications. The architecture uses a Harvard-style bus with separate program and data paths, enabling simultaneous instruction fetch and data access. Its 14-bit instruction word and 8-bit data path balance code density with arithmetic precision. The PIC16C712 is code-compatible with the PIC16C5X and PIC12CXXX families, easing migration and code reuse. Typical applications include white-goods and appliance controls, automotive body modules, industrial sensor interfaces, simple motor control, and consumer electronics. The 4-channel ADC allows direct connection of analog sensors, eliminating an external ADC and reducing BOM cost. Designers should note that OTP memory cannot be re-programmed in-circuit; firmware must be verified via a windowed (JW) package before committing. Industrial-grade (-I) suffix parts are specified from -40C to +85C; verify supply voltage tolerance for battery-powered designs. This page synthesizes distributor pricing, drop-in PIC16C alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

PIC16C712-20I/SO

PIC16C712-20I/SO - 8-Bit 20MHz OTP MCU 1.75KB | Microchip

The Microchip Technology PIC16C712-20I/SO is an 8-bit CMOS OTP-based microcontroller in the PIC16C family, delivering 20 MHz operation (200 ns instruction cycle) in an 18-pin SOIC package. The device integrates 1.75 KB of One-Time-Programmable program memory (1K x 14 words), 128 bytes of RAM, 13 digital I/O pins, and a 4-channel 8-bit Analog-to-Digital Converter (ADC) along with a Capture/Compare/PWM (CCP) module, two 8-bit timers and one 16-bit timer. An 8-bit microcontroller is a single-chip computer that processes data in 8-bit chunks and integrates a CPU, memory, and peripherals. Within the embedded hierarchy, the PIC16C712 sits at: microcontroller -> embedded microcontroller -> microprocessor-based IC -> semiconductor. The OTP variant uses one-time-programmable EPROM for code storage, which makes it suited to mature, cost-sensitive production runs where code is finalized at the time of manufacture and field reprogramming is not required. The 'I' suffix denotes the industrial temperature grade (-40C to +85C). Key features include a high-performance RISC CPU with only 35 single-word instructions to learn, single-cycle execution for most instructions (two cycles for program branches), and brown-out reset plus power-on reset for robust startup. The 8-bit ADC provides up to 4 input channels, while the CCP module supports capture, compare, and PWM generation for motor, lighting, or signal-conditioning control. The wide operating voltage range of 4.0 V to 6.0 V makes it compatible with both 5 V regulated rails and legacy 5 V systems. Architecturally, the PIC16C712 uses a Harvard-style RISC core with separate program and data buses, enabling simultaneous instruction fetch and operand access. The 8-level deep hardware stack, 7 special-function registers, and direct/indirect addressing modes simplify firmware development in assembly or C (with the MPASM/MPLAB toolchain). Compared to legacy 8051 MCUs, the PIC16C712 delivers higher MIPS-per-mW and a smaller instruction footprint. Typical applications include consumer appliance control, simple sensor interface modules, automotive body electronics (A/D-based sensor monitoring), industrial control timers, and white-goods PWM motor drivers. It is widely used in cost-driven embedded products where OTP is acceptable and where on-chip ADC and CCP reduce external component count. Designed-in products span decades thanks to long-life industrial and appliance markets. When designing with this part, allocate the I/O map carefully because RB4-RB7 share an interrupt-on-change feature. Ensure decoupling per Microchip's recommended 100 nF + 10 uF bulk capacitor placement, and respect the 6.0 V absolute maximum on VDD. Designers migrating to flash-based PIC16F equivalents should verify the CCP and ADC register layouts. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical engineering notes not found in the manufacturer datasheet alone, giving procurement and design engineers a faster sourcing decision.

견적 요청 문의하기

PIC16C712/JW

PIC16C712/JW - 8-Bit 20MHz OTP MCU with ADC | Microchip

The Microchip Technology PIC16C712/JW is an 8-bit CMOS RISC microcontroller built around the PIC16C architecture, running at up to 20 MHz (200 ns instruction cycle) with 1.75 KB (1K x 14) of UV-erasable EPROM program memory, 128 bytes of RAM, and 128 bytes of EEPROM data memory. It is housed in an 18-pin CERDIP (windowed) through-hole package that allows the program memory to be erased by UV exposure, making the part suitable for prototyping and field-reprogrammable designs rather than high-volume production programming. What is an 8-bit OTP/EPROM microcontroller? It is a single-chip computer integrating a CPU, non-volatile program memory (one-time-programmable or UV-erasable), RAM, and peripherals such as timers and ADCs. Within the power management and embedded hierarchy, microcontrollers sit at the same tier as DSPs and FPGAs, but are optimized for deterministic control tasks at low cost and low power, and they sit below ASICs in design complexity. PIC16C-series parts belong to Microchip's mid-range 14-bit instruction core family, sitting above the baseline PIC12C and PIC16C5X families and below the PIC17C/PIC18C extended families. Key differentiating features include four channels of 8-bit A/D conversion, two 8-bit timers (Timer0 and Timer2) plus one 16-bit timer (Timer1), a capture/compare/PWM (CCP) module, and a watchdog timer. The 18-pin CERDIP with quartz window enables code development cycles that OTP-only packages do not allow. Operating voltage spans 2.5 V to 5.5 V and the commercial temperature grade is 0 C to +70 C, with the part drawing a few mA active and microamps in standby. Architecturally, PIC16C712 uses a Harvard-style 14-bit-wide program memory bus and 8-bit data bus, with a single accumulator (W) and a 36-byte general-purpose register file. The 8-bit ADC uses successive approximation with a sample-and-hold capacitor and selectable reference voltages, while the CCP module supports capture, compare, and 10-bit PWM modes. This combination of timers, ADC and CCP in a small through-hole package makes the device a popular legacy control platform. Typical applications include automotive body controllers, industrial process control loops, white-goods and appliance controllers, sensor signal conditioning, and consumer device front-ends. The windowed CERDIP package is most often used in development and low-volume production where code revisions are expected. Trade-offs to consider are the CERDIP form factor (through-hole only, large footprint) versus modern surface-mount PIC16F equivalents, and the obsolete/legacy lifecycle status versus currently-active flash parts in the same PIC16 family.

견적 요청 문의하기

PIC16C712T-04E/SO

PIC16C712T-04E/SO - 8-Bit 4MHz OTP MCU 18-SOIC | Microchip

The Microchip Technology PIC16C712T-04E/SO is a CMOS OTP-based 8-bit PIC microcontroller in an 18-pin SOIC wide-body package (Tape & Reel), operating from a single 5V supply at 4 MHz. It integrates 1.75 KB (1K x 14) of One-Time Programmable program memory, 128 bytes of RAM, 13 general-purpose digital I/O pins, and a 4-channel 8-bit Analog-to-Digital converter. What is a PIC 16C microcontroller? PIC 16C refers to Microchip's mid-range 8-bit OTP (One-Time Programmable) microcontroller family using a RISC Harvard architecture. They execute one instruction per cycle (200 ns at 20 MHz) from a fixed 35-instruction set, sit in the hierarchy PIC microcontroller -> 8-bit MCU -> embedded controller -> semiconductor, and historically served low-cost, high-volume consumer and industrial designs before Flash-based PIC16F parts replaced them in new designs. Key features of the PIC16C712T-04E/SO include Brown-out Detect and Power-on Reset for safe startup, a Watchdog Timer for runaway code recovery, a Capture/Compare/PWM (CCP) peripheral, two 8-bit timers plus one 16-bit timer, and a 4-channel 8-bit ADC. The "04" speed grade denotes 4 MHz operation, while the "E" suffix indicates the Extended industrial temperature range (-40C to +125C). The "T" denotes Tape & Reel packaging for high-volume pick-and-place assembly. Architecturally, the device uses a 14-bit wide instruction word with an 8-bit data path, providing 200 ns instruction cycle at 4 MHz (DC to 4 MHz external clock input). The OTP program memory is one-time programmable, requiring a device programmer such as the PICSTART Plus or MPLAB PM3 - field firmware updates are not possible, which is the primary trade-off versus Flash-based PIC16F successors. Typical applications include appliance control, sensor signal conditioning, simple motor drive (via PWM), automotive body electronics, lighting controllers, and battery-powered industrial sensor nodes where the extended temperature grade and 5V tolerance are advantageous. It is also widely used in legacy equipment repair and industrial retrofit designs where exact pin-compatible replacements are required. When designing with this part, note that OTP memory cannot be reprogrammed, so code must be fully verified before commitment. For new designs, the Flash-based PIC16F716-I/SO is generally preferred for in-system reprogrammability, but the PIC16C712T-04E/SO remains valuable for cost-sensitive, high-volume, code-stable applications. This page synthesizes distributor inventory, parametric drop-in equivalents, and design notes that complement the Microchip datasheet. All pricing is referenced as of 2026-09-18.

견적 요청 문의하기

PIC16C712T-04I/SO

PIC16C712T-04I/SO - 8-Bit 4MHz 1.75KB OTP MCU 18-SOIC | Microchip

The Microchip Technology PIC16C712T-04I/SO is an 8-bit CMOS RISC microcontroller built around the PIC16 architecture, operating at 4 MHz with 1.75 KB (1K x 14) of One-Time Programmable (OTP) program memory and 128 bytes of RAM, housed in a surface-mount 18-pin SOIC (SO) package supplied on tape and reel. The part is a member of the legacy PIC16C71x family and offers 4 channels of 8-bit Analog-to-Digital conversion, a Capture/Compare/PWM (CCP) module, and two additional 8-bit timers beyond the baseline Timer0. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, working RAM, and peripheral interfaces onto one silicon die. In the broader semiconductor hierarchy, the PIC16C712 sits within microcontrollers -> embedded processors -> digital ICs -> semiconductors. The "16C" prefix denotes CMOS OTP technology, where the program memory is written once at production time and is non-erasable, making the device well suited to mature, cost-sensitive, high-volume consumer and industrial products where firmware is stable. Key features include 35 single-word RISC instructions, all single-cycle except two-cycle branches, a 200 ns instruction cycle at 20 MHz maximum clock, an 8-level deep hardware stack, and 13 bidirectional I/O pins with individual direction control. The 4-channel 8-bit A/D converter simplifies sensor-interface designs, while the CCP module enables simple PWM motor and lighting control without external timing circuitry. The industrial (-40C to +85C) temperature range is encoded in the "I" suffix, and the "04" speed grade marks the 4 MHz operating point. Typical applications include appliance control modules, simple sensor interfaces with on-chip ADC, low-cost PWM fan or LED drivers, and replacement of legacy PIC16C5X designs requiring A/D capability. The 18-SOIC package is the most common PCB-friendly footprint in the family and matches the PIC16C711 / PIC16C710 pinout, simplifying layout migration. When designing with this device, note that OTP memory cannot be re-programmed in the field, so firmware must be fully validated before production programming. Consider the flash-based PIC16F716 or PIC16F707 as in-system reprogrammable alternatives for new designs. Always de-couple VDD with a 100 nF ceramic capacitor placed within 5 mm of the pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

PIC16C712T-04I/SS

PIC16C712T-04I/SS - 4MHz 8-Bit OTP MCU, 1.75KB | Microchip

The Microchip Technology PIC16C712T-04I/SS is an 8-bit CMOS OTP (One-Time Programmable) microcontroller from the PIC16C family, operating at 4 MHz with a 200 ns instruction cycle and packaged in a 20-pin SSOP (SS) package with industrial-grade temperature rating. What is a PIC microcontroller? A PIC microcontroller is a family of Harvard-architecture 8/16/32-bit microcontrollers originally developed by Microchip Technology, featuring RISC instruction sets, integrated peripherals (ADC, timers, PWM, communication), and on-chip non-volatile memory. The PIC16C sub-family uses One-Time Programmable EPROM for program storage, which is well-suited to high-volume production where firmware is final and code protection is required. The PIC16C712T-04I/SS sits within this OTP-based 8-bit MCU hierarchy as: 8-bit microcontroller -> RISC MCU -> PIC16C OTP family -> PIC16C7xx series with ADC and PWM. Key features include 1.75 KB of program memory organized as 1K x 14 bits, 128 bytes of data RAM, 13 I/O pins, four 8-bit analog-to-digital converter (ADC) channels, a Capture/Compare/PWM (CCP) module, and integrated peripherals such as Brown-out Detect/Reset, Power-on Reset, and a Watchdog Timer. The 35 single-word RISC instruction set and DC to 4 MHz oscillator range simplify firmware development, while the 20-pin SSOP form factor supports compact surface-mount designs. The PIC16C712 uses a modified Harvard architecture with separate program and data buses, allowing instruction fetch and operand read to occur in the same cycle. The 14-bit wide instruction word provides compact code density, while the 8-bit data path keeps peripheral control straightforward. The integrated 8-bit ADC offers up to four channels with configurable reference voltages, supporting sensor and analog signal conditioning tasks. Typical applications include industrial control subsystems, sensor signal acquisition modules, low-cost consumer appliance controllers, and embedded control boards requiring on-chip ADC plus PWM motor or lighting control. The wide 2.5V to 5.5V supply range and 13 I/O pins provide ample headroom for switches, relays, sensors, and communication interfaces. The OTP memory architecture is intended for production volumes where firmware is fixed and code security is desired. When designing with the PIC16C712T-04I/SS, verify whether OTP or Flash-based memory is appropriate: OTP prevents field firmware updates, so production-grade firmware validation must be complete before programming. For prototype and pre-production work, designers may prefer the Flash-based PIC16F712 equivalent, which supports in-circuit reprogramming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including pin-compatible OTP and Flash PIC16 variants and a comparison table for sourcing decisions.

견적 요청 문의하기

PIC16C712T-20/SS

PIC16C712T-20/SS - 8-Bit 20MHz OTP MCU, 1.75KB | Microchip

The Microchip Technology PIC16C712T-20/SS is an 8-bit CMOS OTP (One-Time Programmable) RISC microcontroller from the PIC® 16C family, delivering 20 MIPS performance at 20 MHz in a 20-pin SSOP package. It integrates 1.75 KB of program memory (1K x 14) and 128 bytes of RAM, with 4-channel 8-bit Analog-to-Digital conversion, a Capture/Compare/PWM module, and the standard 35-instruction PIC16C core for compact embedded control code. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripheral interfaces onto one die. The PIC16C712 belongs to the PIC® 16C family of 8-bit RISC microcontrollers, which sit within the broader taxonomy of microcontrollers -> embedded processors -> semiconductor ICs. OTP-based PIC MCUs are programmed once via a device programmer and retain their code without external memory, making them ideal for fixed-function commercial and industrial products where flash reprogrammability is not required. Key features include 200 ns instruction execution time, 13 I/O pins, two 8-bit timers plus one 16-bit timer, watchdog timer with on-chip RC oscillator, power-on reset, brown-out detect, and in-circuit serial programming (ICSP) capability. The 8-bit ADC with 4 input channels supports 8-bit resolution suitable for basic sensor monitoring and potentiometer feedback applications. The architecture uses a Harvard-style 14-bit instruction word with separate program and data buses, enabling deterministic single-cycle instruction execution. The 20-pin SSOP footprint is optimized for space-constrained applications where PCB area matters more than wide peripheral count. Typical applications include consumer appliance control, HVAC thermostats, small motor control, battery chargers, security sensor interfaces, and low-cost industrial control modules. The OTP memory model suits high-volume fixed-code products where unit cost dominates over field upgradability. When designing with this device, ensure the 5V supply rail is stable because the OTP version does not support ISP flash reprogramming in-circuit. Plan code carefully before burning the part, and always order production quantities with a margin for code-revision rework. This page synthesizes distributor pricing, drop-in same-family and cross-brand alternatives, and practical design notes that go beyond what is printed in the manufacturer's datasheet.

견적 요청 문의하기

PIC16C712T-20E/SO

PIC16C712T-20E/SO - 8-Bit 20MHz OTP MCU, 1.75KB | Microchip

The Microchip Technology PIC16C712T-20E/SO is a 8-bit CMOS OTP microcontroller in the PIC16C family, delivering 20MHz (200ns instruction cycle) performance with 1.75KB (1K x 14) of one-time-programmable program memory, 128 bytes of RAM, and 13 general-purpose I/O pins, all housed in an 18-pin SOIC (SO) package with 7.50mm body width. The "T" suffix indicates tape-and-reel packaging, the "20" denotes the 20MHz maximum clock, the "E" designates the extended industrial temperature grade (-40C to +125C), and "/SO" specifies the SOIC-18 surface-mount package. What is an OTP microcontroller? An OTP (One-Time Programmable) microcontroller is a type of embedded computing device whose program memory can be written only once after manufacture, using a programmable ROM cell that is permanently altered (typically by blowing a fuse or antifuse) during device programming. OTP MCUs occupy a middle ground between mask-ROM parts (cheapest at high volume but require factory commitment) and flash-based MCUs (reprogrammable in-circuit but slightly more expensive per unit). They are favored in cost-sensitive, high-volume, mature products where firmware has stabilized and field updates are not required, such as appliance controllers, simple sensor interfaces, and consumer toys. The PIC16C712T-20E/SO integrates a 4-channel 8-bit Analog-to-Digital converter with 2 additional timers (Timer0, Timer1, and Timer2 plus a Capture/Compare/PWM module), enabling mixed-signal embedded designs in a single chip. The 35 single-word instruction RISC architecture simplifies code development, while upward compatibility with PIC16C5X and PIC12CXXX allows firmware migration from older PIC designs. The 18-pin SOIC form factor suits through-hole-free, surface-mount assembly and supports the operating voltage range of 4.0V to 5.5V. Typical applications include appliance control boards, low-cost motor control loops via the CCP module, simple sensor interface front-ends, hobbyist and educational projects, and legacy industrial controller retrofits. The extended temperature range makes the "E" suffix variant suitable for under-hood automotive subsystems and outdoor industrial installations. A key design consideration when selecting an OTP MCU is field-serviceability: once programmed, the device cannot be firmware-updated, so designers must provision programming test pads or sockets in production. Also note that the PIC16C712 series is in mature/legacy status with Microchip, so the PIC16F877A or PIC16F18855 flash-based equivalents are typically preferred for new designs.

견적 요청 문의하기

PIC16C712T-20E/SS

PIC16C712T-20E/SS - 8-Bit 20MHz OTP MCU, 1.75KB, 20-SSOP | Microchip

The Microchip Technology PIC16C712T-20E/SS is a high-performance RISC-based 8-bit CMOS OTP microcontroller from the PIC16C family, operating at up to 20 MHz with a 200 ns instruction cycle. The device integrates 1.75KB (1K x 14) of One-Time-Programmable program memory, 128 bytes of RAM, 13 digital I/O pins, and a 4-channel 8-bit Analog-to-Digital converter, and is housed in a 20-pin SSOP (Shrink Small Outline Package) tape-and-reel format. Background: An 8-bit microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory (ROM/Flash/OTP), volatile data memory (RAM), and peripheral interfaces. The PIC16C family uses a Harvard RISC architecture that separates program and data buses, enabling single-cycle instruction execution for most opcodes except program branches. OTP memory is programmed once and cannot be erased, making OTP MCUs economical for low-to-medium volume applications where firmware is stable. Key features of the PIC16C712T-20E/SS include 35 single-word instructions, Brown-out Detect/Reset (BOR), Power-on Reset (POR), a Watchdog Timer (WDT), a Capture/Compare/PWM (CCP) module, and an extended -40C to +125C industrial operating temperature range denoted by the "E" suffix. The "T" in the part number indicates tape-and-reel packaging, and "20" specifies the 20 MHz maximum clock speed. The "SS" suffix designates the 20-pin SSOP package. Architecturally, the PIC16C712T uses an enhanced PIC16C5X core with 14-bit instruction words, dual 8-bit timer/counters (Timer0 with 8-bit prescaler, Timer1 with 16-bit operation), and a 4-channel 8-bit ADC with selectable reference voltages. The CCP module supports 10-bit PWM resolution, enabling motor control, LED dimming, and signal generation applications. Typical applications include appliance control, automotive subsystems (non-safety-critical), industrial sensor interfaces, low-end motor control, and white goods. The wide operating temperature range also makes it suitable for outdoor and harsh-environment embedded designs. When designing with this MCU, ensure oscillator selection matches the application's clock-accuracy requirements: external clock mode supports crystal or resonator operation up to 20 MHz, and unused I/O pins should be configured as outputs to minimize power consumption. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing cross-package context and selection guidance for engineers evaluating this part.

견적 요청 문의하기

PIC16C712T-20I/SO

PIC16C712T-20I/SO - 8-Bit 20MHz OTP MCU 1.75KB | Microchip

The Microchip Technology PIC16C712T-20I/SO is a member of the PIC16C7xx family of 8-bit CMOS microcontrollers built on a RISC architecture, offering 20 MHz maximum operating frequency, 1.75 KB (1K x 14) of One-Time Programmable (OTP) program memory, and 128 bytes of data RAM in an 18-pin SOIC package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/Flash/OTP), working RAM, and a rich set of peripheral blocks (I/O ports, timers, ADC, communications) onto one die. The PIC16C family uses a Harvard RISC core with a small, deterministic instruction set, allowing most instructions to execute in a single oscillator cycle (4 clocks). Within the broader taxonomy, an 8-bit MCU sits below 16-bit and 32-bit controllers in computational throughput but excels in low cost, low power, and deterministic interrupt response, making it the workhorse of cost-sensitive embedded designs. Key features of the PIC16C712 include an integrated 4-channel, 8-bit Analog-to-Digital Converter (ADC), a 13-bit I/O count across two ports (PORTA and PORTB), a watchdog timer with on-chip RC oscillator, a programmable code-protection mechanism, and an operating voltage range of 2.5 V to 6.0 V (typical 5 V). The 'T' suffix denotes tape-and-reel packaging, '20' indicates the 20 MHz speed grade, and 'I' marks the -40C to +85C industrial temperature range. From an architectural standpoint, the device has a 14-bit instruction word, a 35-instruction set, two 8-bit timer/counters (Timer0, Timer2) plus a 16-bit timer (Timer1), and a 5-channel 8-bit ADC with selectable reference voltages. The 18-pin SOIC package supports through-hole-free assembly and is one of the most widely used footprints for cost-sensitive consumer, industrial, and appliance applications. Typical applications include motor control (small DC and stepper drivers), battery chargers and smart power management, small appliances (coffee makers, hand tools), automotive body controllers (non-safety subsystems), and general-purpose sensor-interface boards. The on-chip ADC allows direct connection to potentiometers, thermistors, and low-bandwidth analog sensors without an external converter. When designing with this part, note that OTP memory cannot be reprogrammed in-circuit; for prototypes choose a windowed (JW) or Flash-based PIC16F equivalent. Also confirm oscillator configuration (RC, XT, HS, LP) matches the crystal or resonator in use, and respect the 20 MHz VDD-dependent limit to avoid timing violations in high-Vdd designs. This page synthesizes distributor pricing, package-level alternatives, and design notes specific to the PIC16C712 SOIC-18 footprint, going beyond the manufacturer datasheet to add selection guidance for engineers evaluating cross-brand 8-bit MCU replacements.

견적 요청 문의하기

PIC16C712T-20I/SS

PIC16C712T-20I/SS - 8-bit CMOS MCU, 1.75KB OTP, 20MHz | Microchip

The Microchip Technology PIC16C712T-20I/SS is an 8-bit CMOS OTP-based microcontroller built on the PIC16C family architecture, offering 1.75KB of program memory (1K x 14 words), 128 bytes of RAM, and 13 I/O pins in a 20-pin SSOP package. It integrates a 4-channel 8-bit Analog-to-Digital Converter (ADC), a Capture/Compare/PWM (CCP) module, and 2 additional timers, executing instructions in 200ns at 20MHz for deterministic embedded control. A microcontroller (MCU) is a single-chip computer integrating a CPU core, non-volatile program memory, working RAM, and peripherals such as ADCs, timers, and communication interfaces. In the broader system hierarchy, the PIC16C712 belongs to: microcontroller -> embedded controller -> semiconductor IC. Within Microchip's taxonomy, the PIC16C family targets 8-bit mid-range applications, sitting between the smaller PIC12C and the more capable PIC17C/18F families. Key features of the PIC16C712T-20I/SS include a 20MHz operating frequency, 20ns instruction cycle, 128-byte SRAM data memory, 13 digital I/O pins, 4-channel 8-bit ADC, integrated CCP module, two 8-bit timers plus one 16-bit timer, watchdog timer with on-chip oscillator, and In-Circuit Serial Programming (ICSP) capability. The OTP (One-Time Programmable) program memory is suited for mature, cost-sensitive production volumes. Technically, the device uses a RISC Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and operand access. Brown-out Reset, Power-on Reset, and a wide 2.5V-5.5V operating range support reliable operation in industrial environments, while the -40C to +85C industrial temperature grade (the I suffix) enables use in non-automotive harsh environments. Typical applications include appliance control, motor control PWM loops, sensor signal conditioning with on-chip ADC, automotive body electronics (non-safety), industrial automation modules, and white-goods control boards. The integrated ADC and CCP module reduce BOM count in mixed-signal designs. When designing with this part, account for the OTP memory constraint: firmware must be fully validated before programming since it cannot be re-flashed. For field-upgradable designs, choose the flash-based PIC16F712 equivalent instead. This page synthesizes distributor pricing, drop-in compatible variants, and practical design considerations not found in the standalone manufacturer datasheet.

견적 요청 문의하기

PIC16C715-04/SO

PIC16C715-04/SO - 8-bit 4MHz MCU, 3.5KB OTP, 13 I/O | Microchip

The Microchip Technology PIC16C715-04/SO is an 8-bit RISC microcontroller from the PIC16C71X mid-range family, featuring a 4 MHz maximum clock frequency, 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, and 128 bytes of on-chip data RAM, all housed in an 18-pin SOIC (SO) package. The device integrates 4 channels of 8-bit Analog-to-Digital (A/D) conversion, a Timer0 8-bit timer/counter with 8-bit prescaler, and 13 bidirectional I/O lines supporting direct LED drive and basic digital interfacing. Operating from a 4.0V to 5.5V single supply, the PIC16C715-04/SO is built on CMOS technology and includes Brown-out Reset (BOR) circuitry for reliable startup under unstable power conditions. An 8-bit microcontroller is a programmable logic device that executes instructions fetched from on-chip program memory using an internal CPU core, with a data path width of 8 bits. Microcontrollers sit within the broader hierarchy of: microcontroller -> microprocessor with integrated peripherals -> embedded computing IC -> semiconductor device. The PIC16C715 belongs to the mid-range PIC16C family, which uses a 14-bit instruction word and Harvard architecture (separate program and data buses), enabling deterministic instruction timing that simplifies real-time control firmware development. Key differentiating features include integrated 8-bit A/D conversion (4 channels) eliminating the need for external ADC ICs in low-resolution analog signal acquisition, hardware Brown-out Reset that prevents code execution at unsafe VDD levels, and a wide commercial operating temperature range suitable for consumer and industrial environments. The OTP program memory allows low-cost, low-volume programming during development or pilot production runs. Architecturally, the PIC16C715 uses a RISC-style instruction set with most instructions executing in a single instruction cycle (4 clock periods), giving an effective throughput of 1 MIPS at 4 MHz. The integrated ADC, BOR, watchdog timer, and power-on reset reduce external component count and BOM cost for embedded applications. Typical applications include automotive body controllers, industrial appliance controls, consumer white goods, simple sensor signal conditioning with on-chip ADC, HVAC thermostat fan wiring, and low-cost embedded control modules. The combination of on-chip ADC and small SOIC-18 footprint makes it well suited for space-constrained analog sensing designs. When designing with this part, ensure the OSC selection bits match the chosen clock source (RC, XT, LP, HS), and allocate sufficient ADC acquisition time (typically >20 us) by adjusting the A/D clock prescaler. OTP memory cannot be re-programmed; consider the Flash-based PIC16F877A or PIC16F88A for in-application reprogrammability. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

PIC16C715-04E/P

PIC16C715-04E/P - 8-bit CMOS MCU, 4MHz, 3.5KB EPROM | Microchip

The Microchip Technology PIC16C715-04E/P is an 8-bit CMOS RISC microcontroller from the PIC16C7X mid-range family, integrating a 4-channel 8-bit A/D converter, 3.5KB EPROM program memory, and 128 bytes of RAM in an 18-pin PDIP (P) through-hole package. It executes instructions in a 200 ns cycle at 4 MHz oscillator input, supports 35 single-word instructions, and operates from a single 4.0 V to 5.5 V supply. An 8-bit microcontroller is a single-chip computer with an 8-bit data path, ALU, registers, program memory, and integrated peripherals. The PIC16C7X family sits in the PIC mid-range hierarchy - more capable than the baseline PIC16C5X/PIC12CXXX but below the PIC17C/PIC18 enhanced families. The PIC16C715 specifically adds an integrated multi-channel ADC and Brown-out Reset (BOR) circuitry, positioning it as a compact analog-friendly MCU. Key features include 13 bidirectional digital I/O pins with individual direction control, an 8-bit Timer0 with an 8-bit programmable prescaler, 4-channel 8-bit A/D converter, on-chip Brown-out Reset (BOR), Power-on Reset (POR), and a Watchdog Timer (WDT) with its own on-chip RC oscillator. The device is fully static CMOS, OTP-based, and offers upward code compatibility with PIC16C5X and PIC12CXXX devices, easing migration. Architecturally, the PIC16C715 uses a Harvard-style separate program and data bus design with a 14-bit instruction word, two-stack hardware stack (PIC16C71X class), and direct/indirect addressing modes. The internal oscillator support and low-power CMOS design suit battery and line-powered embedded applications. BOR and POR ensure defined startup and brown-out recovery, critical for industrial and automotive-grade embedded designs. Typical applications include industrial sensor signal conditioning, low-cost motor control interfaces, automotive body and sensor electronics, appliance control boards, and embedded measurement instruments. The 18-pin PDIP form factor remains popular for through-hole prototyping, educational platforms, and legacy industrial retrofits where surface-mount is impractical. When designing with this MCU, observe the 5.5 V absolute maximum supply and ensure the EPROM programming voltage is correctly sequenced during in-circuit or in-socket programming. For new designs, Microchip recommends the pin-compatible PIC16F716 (Flash-based successor) as a forward migration path with the same 18-pin DIP footprint but in-system programmability. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical engineering notes not found in a single distributor datasheet tab.

견적 요청 문의하기

PIC16C715-04E/SO

PIC16C715-04E/SO - 8-bit OTP MCU 4MHz 3.5KB EPROM | Microchip

The Microchip Technology PIC16C715-04E/SO is an 8-bit CMOS RISC OTP microcontroller with an integrated 8-bit multichannel A/D converter, packaged in an 18-pin SOIC (SO) outline rated for the automotive temperature grade. According to the manufacturer datasheet, the device operates at 4 MHz clock speed from a 4.0 V to 5.5 V supply, integrates 3.5 KB (2K x 14) of EPROM program memory and 128 bytes of data RAM, and exposes 13 individually-direction-controlled I/O pins. Brown-out Reset (BOR), an 8-bit Timer0 with 8-bit prescaler, a Watchdog Timer, and a 4-channel 8-bit ADC round out the on-chip peripherals, making it a self-contained compute-and-sense node for embedded products. Background knowledge: an 8-bit microcontroller is a single-chip computer built around an 8-bit data path and a Harvard program/data memory architecture. Within that hierarchy, the PIC16C715 belongs to the PIC16C mid-range family of OTP (one-time-programmable) EPROM-based MCUs, sitting between the PIC16C711 (no ADC variant, but smaller pin-out) and the flash-based PIC16F716 superset recommended by Microchip. OTP EPROM MCUs are typically chosen for low-to-medium volume products where the BOM cost advantage of EPROM outweighs the field-reprogrammability of flash. The '-04E' suffix denotes the 4 MHz speed grade with the extended (-40C to +125C) automotive temperature range, and the '/SO' suffix designates the 18-lead small-outline (SOIC-18) gull-wing surface-mount package. Key features highlight the system's ability to deliver analog sensing plus digital control from a 4-5.5 V rail, with 13 GPIO that can each be tri-stated, an 8-bit ADC with four input channels multiplexed from PORTA, and brown-out detection that holds the part in reset until VDD is stable. The CMOS process plus the RISC core delivers 200 ns single-cycle instruction execution, so an interrupt service routine or ADC polling loop can run inside the headroom of most 1 ms control loops. Power-saving SLEEP mode and a Watchdog Timer with its own on-chip RC oscillator are included, so the part can survive brown-outs and soak out without external supervisor hardware. Technical depth: the device uses a 14-bit-wide instruction word aligned to the 2K-word EPROM array, which yields 3.5 KB of program memory. The 8-bit data bus is separate (Harvard architecture), so instruction fetch and data access occur in parallel, removing fetch stalls common to von-Neumann 8051-class parts. The brown-out trip threshold is internally trimmed to approximately 4.0 V, and the part exits reset only after VDD rises above that level, eliminating the need for an external reset supervisor in many designs. Typical applications include automotive body controllers and sensor interfaces, HVAC damper and valve control, white-goods user-interface boards, industrial sensor-transmitter front-ends, battery-powered instrumentation with sleep/wake duty cycling, and retrofits of older PIC16C71X boards to the wider-temperature grade. The 4-channel ADC combined with 13 GPIO lets one PIC16C715 replace a discrete analog front-end plus a small MCU on a 1-square-inch PCB. Design consideration: the EPROM cell windowless package does not allow in-circuit reprogramming; firmware is locked at the time of program and cannot be field-updated. Engineers who anticipate firmware revisions should instead migrate to the pin-compatible flash part PIC16F716 (recommended by Microchip) or, where automotive-grade is required, to PIC16F716-I/SO. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

하위 카테고리

제품 (38,000+)

PIC16C711T-20I/SS - 8-bit OTP MCU, 1.75KB, 13 I/O, 20MHz SSOP-20 | Industrial

PIC16C712-04/SO - 8-bit 4MHz OTP MCU 1.75KB | Microchip

PIC16C712-04/SS - 4MHz 8-Bit OTP MCU with 8-bit ADC | Microchip

PIC16C712-04E/P - 8-Bit 4MHz OTP MCU, 1.75KB, 18-DIP | Microchip

PIC16C712-04E/SO - 8-Bit CMOS MCU, 4MHz, 1.75KB OTP, 18-SOIC | Microchip

PIC16C712-04I/P - 8-bit 4MHz OTP MCU with ADC, 18-PDIP | Microchip

PIC16C712-04I/SO - 8-bit OTP MCU 1.75KB 4MHz 18-SOIC | Microchip

PIC16C712-20/P - 8-Bit OTP MCU, 20MHz, 1.75KB | Microchip

PIC16C712-20E/SO - 8-bit 20MHz OTP MCU 18-SOIC | Microchip

PIC16C712-20E/SS - 8-Bit 20MHz MCU 1.75KB OTP 20-SSOP | Microchip

PIC16C712-20I/P - 8-bit 20MHz OTP MCU with 4-ch ADC | Microchip

PIC16C712-20I/SO - 8-Bit 20MHz OTP MCU 1.75KB | Microchip

PIC16C712/JW - 8-Bit 20MHz OTP MCU with ADC | Microchip

PIC16C712T-04E/SO - 8-Bit 4MHz OTP MCU 18-SOIC | Microchip

PIC16C712T-04I/SO - 8-Bit 4MHz 1.75KB OTP MCU 18-SOIC | Microchip

PIC16C712T-04I/SS - 4MHz 8-Bit OTP MCU, 1.75KB | Microchip

PIC16C712T-20/SS - 8-Bit 20MHz OTP MCU, 1.75KB | Microchip

PIC16C712T-20E/SO - 8-Bit 20MHz OTP MCU, 1.75KB | Microchip

PIC16C712T-20E/SS - 8-Bit 20MHz OTP MCU, 1.75KB, 20-SSOP | Microchip

PIC16C712T-20I/SO - 8-Bit 20MHz OTP MCU 1.75KB | Microchip

PIC16C712T-20I/SS - 8-bit CMOS MCU, 1.75KB OTP, 20MHz | Microchip

PIC16C715-04/SO - 8-bit 4MHz MCU, 3.5KB OTP, 13 I/O | Microchip

PIC16C715-04E/P - 8-bit CMOS MCU, 4MHz, 3.5KB EPROM | Microchip

PIC16C715-04E/SO - 8-bit OTP MCU 4MHz 3.5KB EPROM | Microchip