집적 회로

PIC16C715-04I/P

PIC16C715-04I/P - 4MHz 8-bit CMOS MCU 3.5KB OTP 18-PDIP | Microchip

The Microchip Technology PIC16C715-04I/P is an 8-bit CMOS OTP-based microcontroller in the PIC16C7X mid-range family, housed in a 18-pin PDIP (P) package and operating from 4V to 5.5V with a 4MHz oscillator. It integrates 3.5KB (2K x 14) of one-time-programmable program memory, 128 bytes of RAM, 13 digital I/O pins, and a 4-channel 8-bit analog-to-digital converter. What is an 8-bit microcontroller? An 8-bit MCU is a single-chip computer with an 8-bit data path that executes one instruction per cycle and integrates CPU, RAM, non-volatile program memory, and peripherals. The PIC16C715 belongs to the mid-range PIC16C family and inherits the RISC-based PIC architecture, executing instructions in 200ns at 4MHz. As an OTP part, it is intended for volume production where field firmware updates are not required. Key features include 35 single-word instructions, 8-bit timer/counter with 8-bit prescaler, 4-channel 8-bit ADC, brown-out reset (BOR), power-on reset (POR), and a watchdog timer (WDT). The 13 I/O pins each have individually programmable direction control, and the device supports in-circuit serial programming via the ICSP interface. The PIC architecture is upwards compatible with the PIC16C5X baseline and PIC12CXXX devices, simplifying code migration across the family. The PIC16C715 is built on a CMOS process and operates over the industrial temperature range of -40C to +85C as indicated by the /I designator. It is recommended by Microchip as a legacy successor part for designs previously using the PIC16C71X series; the newer flash-based PIC16F716 is suggested as an upgrade path for new designs. Typical applications include industrial control nodes, appliance controllers, automotive body electronics (where OTP cost advantage matters), consumer products with simple A/D sensing, and educational or hobby microcontroller projects. The 4-channel ADC enables direct interfacing with analog sensors (temperature, light, potentiometers). Designers should consider the OTP limitation (no field re-programming) and plan to use PIC16F716-I/P or similar flash parts if firmware iteration is required. The 18-PDIP package remains a strong choice for through-hole prototyping, breadboarding, and educational kits because it is easy to handle and socket-compatible with most PIC16C71X variants. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16C71X family, and design notes that extend the manufacturer datasheet with practical selection guidance for replacement and migration scenarios.

견적 요청 문의하기

PIC16C715-20/P

PIC16C715-20/P - 8-bit OTP MCU, 20MHz, 3.5KB, 13 I/O, A/D | Microchip

The Microchip PIC16C715-20/P is a low-cost, high-performance, fully-static, 8-bit CMOS microcontroller from the PIC16CXX mid-range family, integrating a 4-channel 8-bit Analog-to-Digital converter and packaged in an 18-pin PDIP (through-hole). It executes instructions in 200 ns at a 20 MHz oscillator, programs with only 35 single-word instructions, and is built on Microchip's advanced RISC architecture with an eight-level deep hardware stack and multiple internal/external interrupt sources. The OTP program memory holds 3.5 KB (2K x 14 words), the data SRAM is 128 bytes, and 13 digital I/O pins are available for general-purpose use. An 8-bit microcontroller is a single-chip computer that integrates a CPU, memory (ROM/RAM), and peripherals onto one die; the PIC mid-range family extends this concept with a RISC Harvard architecture where program and data buses are physically separated, allowing simultaneous instruction fetch plus data access for deterministic, predictable execution. PIC microcontrollers remain a foundational part of the broader 8-bit MCU market (a sub-category of microcontrollers, which themselves belong to integrated circuits / embedded computing) and are widely deployed in cost-sensitive embedded applications. Key features of the PIC16C715-20/P include 4 channels of 8-bit A/D conversion (making it ideal for sensor reading applications), a 20 MHz maximum operating frequency, 8-bit data path width, on-chip oscillator support (with optional external crystal/resonator), and a wide operating voltage range supporting both 3.0V and 5.0V system designs. The integrated A/D converter eliminates the need for external ADC chips in many designs, reducing BOM cost and PCB footprint. Architecturally, the PIC16C715 employs a 14-bit instruction word with separate program and data buses (Harvard architecture), enabling most instructions to execute in a single instruction cycle. The 8-level deep hardware stack supports nested subroutine calls without software overhead. This OTP-based device is one-time programmable, meaning program memory cannot be erased electrically - making it suitable for production volumes but less ideal for prototyping compared to flash-based PIC16F series. Typical applications include industrial control systems, appliance controllers, automotive sensor interfaces, consumer electronics, low-cost data acquisition systems, and battery-powered instruments. The integrated A/D makes it particularly suited for any application needing analog signal measurement alongside digital I/O control. When designing with the PIC16C715-20/P, remember that it is OTP memory - firmware is permanently written at production time and cannot be updated in the field. For designs requiring in-field reprogrammability or prototype iteration, Microchip recommends migrating to the flash-based PIC16F716, which offers similar peripherals and pin compatibility while supporting hundreds of erase/write cycles. This page synthesizes distributor pricing, drop-in alternatives, lifecycle data, and practical design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기

PIC16C715-20/SO

PIC16C715-20/SO - 8-Bit 20MHz OTP MCU 3.5KB 18-SOIC | Microchip

The Microchip Technology PIC16C715-20/SO is an 8-bit CMOS OTP (One-Time Programmable) microcontroller from the PIC16C7X mid-range family, operating at up to 20MHz with 200ns instruction execution, packaged in an 18-pin SOIC (0.295", 7.50mm width) with 3.5KB (2K x 14) of program memory and 128 bytes of RAM, and featuring an integrated 4-channel 8-bit Analog-to-Digital converter. Background - what is an OTP microcontroller? An OTP (One-Time Programmable) microcontroller is a non-erasable variant of flash/EPROM-based MCUs that is programmed once at production or in-system and cannot be reprogrammed. OTP parts are commonly used where cost-sensitive, high-volume consumer or industrial applications do not require firmware updates. They sit within the broader category of 8-bit microcontrollers (8-bit MCU -> microcontroller -> embedded processor -> semiconductor), and the PIC16C715 belongs to Microchip's PIC16 mid-range architecture that uses a 14-bit instruction word and 35 single-word instructions. Key features include a 13-bit I/O count, four 8-bit A/D input channels for direct sensor interfacing, low-power CMOS static design with a commercial 0C to +70C operating range, watchdog timer, power-on reset, and a programmable code-protection mechanism. The RISC architecture delivers deterministic interrupt response and predictable cycle counts - essential for real-time control loops. The PIC16C715 architecture combines a Harvard bus with separate program and data paths, allowing the 14-bit instruction fetch and 8-bit data read/write to occur in the same cycle. The 8-bit ADC includes its own sample-and-hold, and the device is upwards compatible with PIC16C5X and PIC12CXXX for code portability. With the '-20' speed grade, the oscillator supports up 20MHz, providing roughly 5 MIPS throughput. Typical applications include appliance control boards, simple sensor interfaces that need on-chip ADC, low-cost consumer products, automotive body modules (legacy), industrial timers and counters, and remote-control transmitters. The integrated ADC removes the need for an external analog front end in cost-sensitive designs. When designing with this device, note that the PIC16C715 is OTP and cannot be firmware-updated in the field - use PIC16F716 or PIC16F716-I/SO for flash-based equivalents. Commercial grade (0C to +70C) limits deployment in extended-temperature environments; consider PIC16C715-20I/SO for industrial -40C to +85C. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in a single datasheet reference, helping procurement and embedded engineers evaluate the part in context.

견적 요청 문의하기

PIC16C715-20E/P

PIC16C715-20E/P - 8-bit CMOS MCU 3.5KB OTP 4ch ADC DIP-18

The Microchip Technology PIC16C715-20E/P is an 8-bit CMOS OTP-based microcontroller built on the PIC16 RISC architecture, featuring 3.5KB of EPROM program memory, 128 bytes of RAM, and a 4-channel 8-bit analog-to-digital converter, housed in an 18-pin plastic DIP (PDIP) package. It executes instructions in 200 ns (5 MIPS at 20 MHz oscillator) using only 35 single-word instructions, providing an excellent balance of code density and execution speed for embedded control applications. An 8-bit OTP microcontroller is a single-chip computer with one-time-programmable non-volatile program memory that can be written exactly once, after which the code becomes permanent. The PIC16 family belongs to the broader PICmicro taxonomy (8-bit MCU -> RISC MCU -> microcontroller -> embedded IC), and is fully upwards compatible with the PIC16C5X baseline and PIC12CXXX 8-pin families, allowing code and toolchain reuse across product lines. Key features include 13 individually direction-controlled digital I/O pins, an 8-bit Timer0 with 8-bit prescaler, brown-out reset (BOR) circuitry for safe power-up, a watchdog timer, and four multiplexed ADC channels with 8-bit resolution. The wide 4.0V to 5.5V supply range targets legacy 5V-only designs, while the integrated ADC eliminates an external converter in cost-sensitive analog sensing applications. Internally, the PIC16C715 uses a Harvard architecture with separate program and data buses, allowing instruction fetch and operand access to occur in the same cycle. The 14-bit wide instruction word and RISC engine deliver deterministic 200 ns instruction timing, simplifying real-time control loops. The -20E speed grade guarantees 20 MHz operation across the -40C to +125C extended industrial temperature range, making the part suitable for harsh-environment automotive, appliance, and industrial control boards. Typical applications include automotive sensor interfacing, white-goods and small-appliance controllers, simple industrial automation nodes, and consumer products requiring on-board analog signal acquisition. The 4-channel ADC supports direct connection to thermistors, potentiometers, and low-bandwidth analog sensors without external signal conditioning. When designing with this part, note that the EPROM windowless package is intended for production use only; for prototype development, use the PIC16C715/JW ceramic windowed package for UV-eraseable parts, or migrate to the flash-based PIC16F716 for reprogrammability. Always include proper decoupling (100 nF + 10 uF) within 5 mm of the VDD pin to suppress switching transients during EPROM programming. This page synthesizes verified distributor pricing, drop-in DIP-18 alternatives drawn from the Site MPN cross-reference list, and practical design notes that go beyond the manufacturer datasheet for engineers evaluating long-term sourcing of PIC16C7x legacy designs.

견적 요청 문의하기

PIC16C715-20E/SS

PIC16C715-20E/SS - 8-bit CMOS MCU, 20MHz, 3.5KB OTP, 20-SSOP

The Microchip PIC16C715-20E/SS is an 8-bit CMOS OTP microcontroller from the PIC16C7X mid-range family, delivering 20MHz core operation, 3.5KB (2K x 14) of One-Time-Programmable program memory, and 128 bytes of RAM in a 20-pin SSOP package. It integrates a 4-channel 8-bit Analog-to-Digital converter with Brown-out Reset (BOR), a Timer0 8-bit timer/counter with 8-bit prescaler, and 13 bidirectional I/O pins with individual direction control, optimized for cost-sensitive embedded applications requiring on-chip analog acquisition. A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable I/O peripherals. The PIC16C715 belongs to the PIC16CXX mid-range architecture family, positioned between the baseline PIC16C5X and the enhanced PIC17CXX. The 8-bit core executes one instruction every 200ns at 20MHz, with only 35 single-word instructions to learn, making this MCU category the foundational tier in the broader microcontroller hierarchy: microcontroller -> embedded processor -> semiconductor IC. Key features include 4 ADC input channels with 8-bit resolution, 13 I/O pins supporting individual TRIS direction control, hardware Brown-out Reset for reliable supply-voltage monitoring, and an extended operating temperature range of -40°C to +125°C. The /E suffix denotes the extended temperature grade, while /SS indicates the 20-pin Shrink Small Outline Package (5.3mm body width) for compact surface-mount designs. The PIC16C715 employs a Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and data access. The 14-bit wide instruction word improves code density compared with 12-bit baseline PIC cores, and the CMOS static design enables full stop/oscillator operation with minimal current draw. On-chip RC oscillator support and a wide 4.0V–5.5V supply range simplify power-tree design. Typical applications include industrial sensor conditioning front-ends, consumer appliance control boards, automotive body modules (non-safety), HVAC thermostat controllers, and battery-powered instrumentation. The integrated ADC reduces external component count where 8-bit conversion accuracy is sufficient. When designing with this device, note that Microchip recommends PIC16F716 as a newer flash-based replacement with equivalent peripherals and pinout; migration from the OTP PIC16C715 to the flash PIC16F716 allows in-circuit reprogramming while preserving the development toolchain investment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C715-20I/SO

PIC16C715-20I/SO - 8-bit 20MHz OTP MCU, 3.5KB, 13 I/O | Microchip

The Microchip Technology PIC16C715-20I/SO is an 8-bit CMOS OTP-based microcontroller from the PIC16CXX mid-range family, operating at up to 20MHz (200 ns instruction cycle) and housed in an 18-pin SOIC (SO) package with industrial temperature grade (-40C to +85C). It integrates 3.5KB of OTP program memory (2K x 14 words), 128 bytes of RAM, 13 general-purpose I/O pins, and a 4-channel 8-bit analog-to-digital converter with brown-out reset (BOR) and a Timer0 8-bit timer/counter with 8-bit prescaler. An OTP microcontroller is a one-time-programmable device - the on-chip program memory can be written exactly once using a device programmer, after which the code is permanent. This makes OTP MCUs a cost-optimized choice for high-volume, code-stable embedded products where field firmware updates are not required. The PIC16C715 belongs to the broader microcontroller (MCU) hierarchy: MCU -> embedded controller -> 8-bit microcontroller -> CMOS mid-range MCU. Its PIC16CXX mid-range core delivers deterministic execution with only 35 single-word instructions, easing code generation in assembly or C (MPLAB XC8). Key features include 4 channels of 8-bit A/D conversion for sensor interfacing, 13 I/O pins with individually programmable direction, an internal oscillator option to reduce external component count, brown-out reset for reliable power-on behavior, and a wide 4.0V to 5.5V supply range. The device supports in-circuit serial programming (ICSP) via two pins, allowing factory programming even after board assembly. The PIC16C715 uses a Harvard architecture with separate program and data buses, achieving a 200 ns instruction cycle at 20MHz. The 8-bit ALU, working register (W), and 7 special-function registers handle arithmetic, logical, and bit-manipulation operations. The integrated A/D converter uses successive approximation with 4 multiplexed input channels, suitable for sensor signal digitization. Typical applications include appliance control modules, automotive sensor interfaces, industrial process monitoring, consumer electronics with fixed firmware, and low-cost data acquisition front-ends. Its combination of integrated ADC, BOR, and small SOIC footprint makes it well suited for compact PCB designs. When designing, reserve the MCLR pin for either an external reset network or ICSP. Use 0.1uF decoupling close to VDD and a bulk capacitor at the supply pin. The A/D reference selection (VDD or external) directly determines conversion accuracy, so layout the analog pins away from digital switching traces. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

PIC16C715/JW

PIC16C715/JW - 8-Bit 20MHz MCU, 3.5KB EPROM, 18-CERDIP Window | Microchip

The Microchip Technology PIC16C715/JW is an 8-bit CMOS RISC microcontroller in an 18-pin CERDIP windowed package, featuring 20MHz maximum clock speed, 3.5KB (2K x 14) of one-time-programmable (OTP) EPROM program memory, and 128 bytes of RAM. It operates from a 4V to 5.5V supply and integrates 4 channels of 8-bit Analog-to-Digital converter, 13 I/O pins, and an external oscillator interface, all in a UV-erasable CERDIP form factor intended for through-hole prototyping. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and configurable peripherals on one die. Within the broader taxonomy, the PIC16C715 belongs to the 8-bit microcontroller family, specifically Microchip's mid-range PIC16C architecture (PIC16 -> PIC16C -> PIC16C7xx), itself a branch of the PIC RISC family of microcontrollers and finally a category of embedded processors / semiconductors. Engineers choose OTP-EPROM PIC MCUs for low-volume production runs where in-system reprogrammability is not required but a known-good code pattern has been validated. Key features include 4 channels of 8-bit A/D conversion (suitable for sensor interfaces in automotive, industrial, appliance, and consumer products), 13 digital I/O pins, a 20MHz oscillator input that yields 200ns instruction execution, and only 35 single-word instructions to learn. The CERDIP window package allows UV erasure during development, which is uncommon in modern MCU packages and signals the part's heritage as a development-friendly variant within the PIC16C7xx line. The PIC16C715 core is a Harvard-architecture RISC CPU with separate program and data buses, supporting a 14-bit instruction word and an 8-bit data path. It executes one instruction per internal clock cycle (four oscillator clocks) and provides a hardware interrupt controller, watchdog timer, and power-on reset. The 8-bit A/D converter uses successive-approximation register (SAR) topology with analog input multiplexing across four channels. Typical applications include automotive sensor interfaces, industrial control, consumer appliance controllers, and low-cost embedded products requiring analog input. The wide 4V-5.5V range and 13 I/O pins make it well suited to motor-control front ends and user-interface panels with mixed analog/digital signals. When designing with the PIC16C715, ensure your toolchain is configured for the PIC16C7xx device family and use Microchip's MPASM assembler or C compilers with the appropriate header file. The /JW windowed package is intended for engineering development; for production, switch to a one-time-programmable PDIP or windowless CERDIP variant. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC16C family and competing 8-bit MCU lines, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C715T-04/SO

PIC16C715T-04/SO - 8-Bit 4MHz OTP MCU 3.5KB | Microchip

The Microchip Technology PIC16C715T-04/SO is an 8-bit PIC16-series CMOS microcontroller built around a RISC core with 35 single-word instructions and 200 ns instruction execution time, packaged in a 18-lead SOIC (SO) with Tape & Reel packaging. The device integrates 3.5 KB of One-Time-Programmable (OTP) program memory organized as 2K × 14 words and 128 bytes of data RAM, runs at a maximum clock frequency of 4 MHz, and operates from a 5 V supply typical of mid-range PIC microcontrollers. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripheral interfaces such as timers, I/O ports, and analog-to-digital converters into one package. Within the broader taxonomy, the PIC16C715 belongs to the PIC16 mid-range family of 8-bit microcontrollers, which sits under the PIC16C OTP/EPROM-based sub-family and ultimately under Microchip's 8-bit PIC architecture — a category commonly placed under embedded microcontrollers and then under Integrated Circuits. The PIC16C715 specifically integrates a 10-bit (approximate) ADC and 13 digital I/O pins, making it suitable for mixed-signal embedded designs. Key features include low-power CMOS technology, an integrated 8-bit ADC, 13 digital I/O lines, two timer modules (TMR0 and TMR1-style counters referenced in mid-range PICs), a watchdog timer, and the standard PIC16 in-system programming/serial programming interface. The 4 MHz maximum oscillator frequency and 35-instruction RISC core yield predictable deterministic interrupt latency that embedded engineers rely on for real-time control. Architecturally, the part uses a Harvard-style memory map with separate program and data buses, a 14-bit wide instruction word, and a file-register map split between General Purpose Registers (GPR) and Special Function Registers (SFR). The OTP program memory allows one-time customization during manufacturing or engineering bring-up, while the SRAM data memory retains run-time state. Typical applications include appliance control, sensor signal conditioning with on-chip ADC, low-cost consumer electronics, automotive body controllers, and industrial automation sub-systems where a compact 18-pin footprint, a 4 MHz clock, and an integrated analog front-end reduce BOM cost. The 18-SOIC package supports automated SMT assembly in volume production. When designing with this device, observe the 4 MHz oscillator ceiling and ensure decoupling on VDD/VSS. Note that the OTP memory cannot be re-programmed, so firmware must be fully validated before commit. Per Microchip's product page, the newer flash-based PIC16F716 is recommended for new designs. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in a single source on the manufacturer datasheet.

견적 요청 문의하기

PIC16C715T-04/SS

PIC16C715T-04/SS - 4MHz 8-bit CMOS OTP MCU w/ ADC | Microchip

The Microchip Technology PIC16C715T-04/SS is a CMOS, fully-static, 8-bit RISC microcontroller based on One-Time-Programmable (OTP) EPROM with 3.5KB of program memory (2K x 14 words), 128 bytes of data RAM, and an integrated 4-channel 8-bit analog-to-digital converter. The part operates from a 5V supply (commercial temperature grade 0C to +70C) at a maximum clock frequency of 4 MHz, delivering 200 ns instruction execution time, and is housed in a 20-pin SSOP (209 mil / 5.30 mm body width) package supplied on Tape and Reel. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data RAM, and peripherals into one package. PIC microcontrollers use a Harvard RISC architecture with a small, fixed instruction set - the PIC16C715 belongs to Microchip's mid-range PIC16CXX family with 35 single-word instructions, making it easy to program in assembly or C. The 'C' in PIC16C715 indicates One-Time-Programmable EPROM program memory, intended for low-volume production and prototyping. Key features include 13 digital I/O pins, 4 channels of 8-bit ADC, a 14-bit wide instruction word, and two 8-bit timers plus one 16-bit timer (TMR1). The 4 MHz oscillator input combined with the 4-clock-per-instruction cycle yields a 1 MHz instruction rate, and the integrated ADC simplifies sensor-interface designs by eliminating an external converter IC. The architecture is fully static, allowing the clock to be stopped without loss of internal state - a useful trait for low-power wait modes. The mid-range 14-bit core is upward-compatible with the PIC16C5X baseline and PIC12CXXX 8-pin devices, so code written for related parts can be ported with minimal changes. According to the Microchip datasheet, the device supports both RC and crystal oscillator modes. Typical applications include appliance control, low-cost sensor signal conditioning, battery chargers, and any 5V embedded design that needs on-chip ADC without the recurring cost of flash. Note that Microchip recommends the newer PIC16F716 as a flash-reprogrammable migration path for new designs. For designs still using this OTP part, plan the program code carefully before programming - OTP devices cannot be erased. Use an emulator or windowed sample (PIC16C715JW) for prototype development. This page synthesizes distributor pricing, drop-in alternatives within the PIC16C71X family, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C715T-04I/SO

PIC16C715T-04I/SO - 8-Bit PIC MCU, 4MHz, 3.5KB OTP, 18-SOIC

The Microchip Technology PIC16C715T-04I/SO is an 8-bit CMOS OTP-based microcontroller in the PIC16C mid-range family, delivering 4 MIPS performance at 4 MHz maximum clock and packaged in an 18-pin SOIC (SO) on tape-and-reel. It integrates 3.5 KB (2K x 14) of One-Time-Programmable program memory, 128 bytes of data RAM, 13 digital I/O pins, four 8-bit analog-to-digital converter channels, and a single 8-bit timer/counter. A microcontroller (MCU) is a single-chip computer that combines a CPU, program memory, data RAM, peripherals, and I/O on one die; the PIC16C715 sits in the legacy "C" OTP generation between the original PIC16C5X baseline and the modern flash-based PIC16F series, designed for high-volume, cost-sensitive embedded control where code is finalized at production and reprogramming is not required. The PIC16C715 family remains pin-compatible and instruction-set compatible with the PIC16C71X group, supporting assembler and C development under MPLAB and the XC8 compiler. Key specifications include a 200 ns instruction cycle, a wide 3.0 V to 5.5 V operating range, an industrial -40 °C to +85 °C temperature grade, and the proprietary PIC RISC architecture with only 35 single-word instructions. The 13 I/O pins can source/sink up to 25 mA for direct LED drive, and the 4-channel 8-bit ADC simplifies sensor-interface designs without external converter ICs. The PIC16C715 uses a Harvard-class architecture with separate program and data buses, a hardware accumulator-based ALU, and an integrated 8-bit successive-approximation ADC. Its OTP EPROM cell provides one-time field or factory programmability at lower mask cost than ROM, making the part attractive for mid-volume production runs where unit pricing matters more than in-system re-programmability. Typical applications include appliance control, sensor signal conditioning, low-cost motor drive, simple LED display drivers, and battery-powered instrumentation. Microchip explicitly recommends the flash-based PIC16F716 as the recommended migration path for new designs and for designs requiring in-system reprogramming. When laying out the PCB, place a 0.1 µF decoupling capacitor as close as possible to VDD, reserve the MCLR pin for a proper reset circuit (do not leave floating), and configure the ADC inputs with adequate trace guarding if the digital switching currents are large. The 04 speed grade denotes 4 MHz operation; the 20 MHz equivalent is the PIC16C715T-20I/SO. This page synthesizes distributor pricing, drop-in same-package alternatives, application recommendations, and design notes not consolidated on any single distributor page, giving engineers a single reference for sourcing, replacement, and design-in decisions for the legacy PIC16C715T-04I/SO.

견적 요청 문의하기

PIC16C715T-04I/SS

PIC16C715T-04I/SS - 8-Bit PIC MCU, 3.5KB OTP, 4MHz, 20-SSOP

The Microchip PIC16C715T-04I/SS is a CMOS, fully-static, 8-bit PIC microcontroller from the PIC16C71X family, supplied in a 20-pin SSOP (Shrink Small Outline Package) on tape-and-reel. The "T" suffix denotes tape-and-reel packaging, "04" indicates a 4 MHz maximum oscillator frequency, "I" denotes the industrial temperature range (-40C to +85C), and "/SS" specifies the SSOP package. The device integrates 3.5 KB of one-time-programmable (OTP) program memory, 128 bytes of data RAM, 13 digital I/O pins, and a 4-channel 8-bit analog-to-digital converter (ADC), making it suitable for mixed-signal embedded applications. An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, program memory (ROM/EPROM/Flash/OTP), working RAM, and peripherals such as timers, ADC, and I/O ports. The PIC16C71X family belongs to Microchip's mid-range PIC architecture (14-bit instruction word), sitting above the baseline PIC16C5X in instruction set power and below the PIC18 family in performance. This hierarchy (OTP-based 8-bit MCU -> PIC mid-range -> 8-bit microcontroller family -> embedded MCU category) makes the PIC16C715 a workhorse for cost-sensitive, low-power control applications. Key features include 200 ns instruction execution time (5 MIPS at 4 MHz), 35 single-word instructions, an 8-level deep hardware stack, four interrupt sources, and a programmable code-protection bit. The 8-bit ADC delivers 4 channels with selectable reference voltages, supporting sensor and signal-acquisition tasks. The CMOS process delivers low power consumption suitable for battery-operated and industrial embedded designs. Architecturally, the device uses a Harvard bus architecture with separate program and data paths, enabling simultaneous instruction fetch and operand access. The RISC-style 35-instruction set simplifies code development while supporting bit-level manipulation, a hallmark of PIC microcontrollers. Two 8-bit timer/counters and one 16-bit timer/counter provide flexible event timing, while the watchdog timer enhances system reliability. Typical applications include sensor signal conditioning, simple motor control, white goods and appliance control, industrial automation peripherals, and battery-powered instrumentation. The industrial temperature range and integrated ADC make it well suited for harsh-environment embedded systems. When designing with this device, note that OTP program memory requires one-time programming during manufacturing and cannot be field-updated; for prototype or low-volume production, consider the flash-based PIC16F716 equivalent recommended by Microchip. Brown-out reset, power-on reset, and watchdog timer features must be configured by firmware for robust operation. This page synthesizes distributor pricing, drop-in alternatives from the same PIC16C71X family, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C715T-20/SS

PIC16C715T-20/SS - 8-Bit 20MHz OTP MCU 3.5KB EPROM SSOP-20 | Microchip

The Microchip Technology PIC16C715T-20/SS is an 8-bit RISC CMOS microcontroller from the PIC16C7XX mid-range family, integrating 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, 128 bytes of data RAM, and a 4-channel 8-bit analog-to-digital converter in a 20-pin SSOP package. The part runs at a maximum clock rate of 20 MHz and is supplied in tape-and-reel packaging for high-volume surface-mount assembly. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and peripheral set. Within the PIC16 family hierarchy, the PIC16C715 sits in the mid-range architecture (14-bit instruction word) above the baseline PIC16C5X (12-bit) and below the enhanced PIC16F/18F families, balancing code density against peripheral integration for cost-sensitive embedded designs. Key features include the 20 MHz instruction throughput (200 ns instruction cycle), an integrated 8-bit A/D converter with four input channels, 13 digital I/O pins, a hardware 8-bit timer/counter (TMR0) with an 8-bit prescaler, and a Watchdog Timer with its own on-chip RC oscillator. The OTP program memory is windowless and non-erasable, making the part suited to mature production code that does not require in-system firmware updates. The part operates from a single 2.5V to 5.5V supply. The architecture is fully static CMOS with a RISC instruction set of 35 single-word instructions, allowing precise control of program counter branches, bit-level I/O manipulation, and deterministic interrupt latency. The internal A/D converter uses successive-approximation topology with sample-and-hold, suitable for low-speed sensor acquisition at the kilohertz range. Brown-out Reset and Power-on Reset are integrated to prevent code-execution errors during supply transients. Typical applications include sensor signal conditioning front-ends, low-cost appliance controllers, white-goods user-interface modules, industrial push-button panels, simple closed-loop fan or pump controllers, and hobbyist / educational embedded platforms. Designers choose the PIC16C715T-20/SS when the production code base is fixed, code size is below 3.5KB, and a 4-channel 8-bit A/D is sufficient. When designing with this device, observe the OTP-programming voltage requirements (VPP = 12V-14V typical during ICSP) and provide adequate decoupling (0.1 uF plus 10 uF bulk) on VDD. The SSOP-20 package has a thermal resistance of approximately 90 C/W, and the I/O sink/source current is 25 mA per pin, 200 mA total package, so plan load drive accordingly. This page synthesizes distributor pricing, drop-in Microchip-family alternatives, and practical design notes for engineers evaluating the PIC16C715T-20/SS for new designs or maintenance of legacy systems.

견적 요청 문의하기

PIC16C715T-20E/SO

PIC16C715T-20E/SO - 8-bit OTP MCU, 3.5KB, 20MHz | Microchip

The Microchip PIC16C715T-20E/SO is a CMOS, fully-static, 8-bit microcontroller belonging to the PIC16C71X mid-range family, featuring an integrated analog-to-digital converter and 3.5KB of One-Time-Programmable (OTP) program memory. Housed in an 18-pin SOIC (SO) package supplied on tape-and-reel, the device executes instructions in 200 ns at a 20 MHz oscillator rate and is rated for the extended automotive temperature grade. The PIC16C715T-20E/SO provides 128 bytes of RAM, 13 digital I/O pins, and a 4-channel 8-bit ADC, making it suitable for cost-sensitive embedded control applications. An OTP-based 8-bit PIC microcontroller is a single-chip computing core that combines a RISC CPU, non-volatile program memory, RAM, peripherals, and I/O on one silicon die. Unlike flash-based MCUs, OTP memory can be programmed once after manufacture, lowering unit cost for high-volume production runs where firmware is stable. The PIC16C71X family sits within the broader PIC mid-range architecture, which itself is a member of the 8-bit microcontroller category under embedded microcontrollers and integrated circuits. The part also supports in-circuit serial programming (ICSP) for development despite its OTP nature. Key features include 35 single-word instructions, an 8-bit timer/counter with a prescaler, a watchdog timer with on-chip RC oscillator, and 13 I/O pins with individual direction control. The integrated 8-bit A/D converter has 4 input channels and supports both ratiometric and absolute voltage measurements with reference options from device VDD or external VREF. Brown-out reset and power-on reset are integrated, reducing external component count. The architecture is built on a Harvard-style RISC core with a 14-bit instruction word, two-stage pipeline, and 8-bit data path. The OTP program memory is implemented as EPROM cells, providing non-volatility at lower cost than flash. The 20 MHz clock rate delivers 5 MIPS of throughput, sufficient for sensor sampling, motor control loops, and simple user-interface tasks. Typical applications include automotive body controllers, sensor signal conditioning, simple motor drivers, battery management, and white-goods appliance controls. The automotive temperature grade (-40C to +125C) qualifies the part for under-hood and cabin electronic modules. When designing with this part, ensure the ICSP programming header is accessible during board bring-up, because OTP memory cannot be erased and re-flashed in production.

견적 요청 문의하기

PIC16C715T-20E/SS

PIC16C715T-20E/SS - 8-bit 20MHz OTP MCU 3.5KB | Microchip

The Microchip Technology PIC16C715T-20E/SS is a 8-bit CMOS OTP (One-Time Programmable) microcontroller from the PIC16C71X mid-range family, operating at up to 20 MHz with 200 ns instruction execution, packaged in a 20-pin SSOP (Shrink Small Outline Package). It integrates 3.5 KB of program memory (2K x 14) and 128 bytes of RAM with 35 single-word instructions, packaged in tape-and-reel format as indicated by the "T" suffix and supplied in an industrial-grade SSOP outline. A PIC (Peripheral Interface Controller) microcontroller is a compact RISC-based computer-on-a-chip that integrates a CPU core, non-volatile program memory, working RAM, and peripheral blocks such as timers, comparators and analog-to-digital converters. The PIC16C71X family belongs to Microchip's PIC16 mid-range architecture, positioned between the baseline PIC10/12/16 families and the high-performance PIC18/dsPIC lines, and is widely used in cost-sensitive embedded designs that need an integrated ADC. Key features of the PIC16C715 include 4 channels of 8-bit ADC, an integrated 8-bit timer/counter with 8-bit prescaler, a Watchdog Timer with its own on-chip RC oscillator, an 8-level deep hardware stack, and a programmable code protection mechanism. The device operates across 2.5 V to 6.0 V (typical 5 V) with industrial temperature range support, and the "E" suffix designates the extended temperature grade. Architecturally, the PIC16C715 uses a Harvard-style RISC core with separate program and data buses, allowing instruction fetch and operand access to occur in the same cycle. Its OTP EPROM program memory is one-time programmable using a standard EPROM programmer, which historically made this part popular for low-to-medium volume production runs before Flash-based PIC16F equivalents became dominant. Microchip now recommends the pin-compatible PIC16F716 as the modern flash-reprogrammable replacement. Typical applications include motor control front-ends, automotive sensor interfaces, white goods and appliance control, low-cost remote sensors, and battery-powered instrument front panels that benefit from integrated ADC. Its small 20-pin SSOP footprint also suits consumer products where PCB area is at a premium. Designers should note that OTP parts cannot be re-programmed in-circuit; production firmware must therefore be fully validated before programming. The "-20E" suffix indicates 20 MHz maximum clock with extended operating temperature range, while the SSOP package offers a more compact alternative to the PDIP for space-constrained layouts. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives and practical design notes that are not consolidated in any single manufacturer or distributor source.

견적 요청 문의하기

PIC16C715T-20I/SS

PIC16C715T-20I/SS - 8-bit OTP MCU 3.5KB EPROM 20MHz 20-SSOP | Microchip

The Microchip Technology PIC16C715T-20I/SS is an 8-bit CMOS OTP-based PIC16C mid-range microcontroller packaged in a 20-pin SSOP and rated for the industrial temperature range (-40C to +85C). It integrates a 3.5KB (2K x 14) one-time-programmable program memory, 128 bytes of RAM, 13 digital I/O lines, a 4-channel 8-bit analog-to-digital converter (ADC), and a 20 MHz internal oscillator option that delivers 200 ns instruction execution. What is an OTP microcontroller? An OTP (One-Time-Programmable) microcontroller is a class of MCU whose program memory can be written only once after manufacture, using an external programmer. OTP parts are widely used in cost-sensitive, high-volume consumer and industrial products where firmware is finalized at production time and field re-programmability is not required. Within the broader semiconductor hierarchy, OTP MCUs sit under: microcontroller -> embedded processor -> digital IC -> semiconductor. The PIC16C715 belongs to Microchip's PIC16C mid-range family, which combines RISC architecture (35 single-word instructions) with integrated analog peripherals for compact mixed-signal designs. Key features include PIC16C5X/PIC12CXXX upward source-code compatibility, 4-channel 8-bit ADC with selectable reference, low-power CMOS design, on-chip reset and watchdog timer, and a wide 2.5V to 5.5V VDD operating range. The 20-SSOP (209-mil) package is footprint-compatible with other PIC16C71X and PIC16F71X family members, simplifying PCB layout migration. Power-saving SLEEP mode and a programmable code-protection bit round out the peripheral set for cost-driven embedded control. Architecturally, the PIC16C715 uses a Harvard-class RISC core with separate program (14-bit wide OTP) and data (8-bit wide SRAM) buses, allowing simultaneous instruction fetch and operand access. The 200 ns instruction cycle at 20 MHz oscillator provides deterministic 5 MIPS throughput suitable for closed-loop control loops, sensor signal conditioning, and simple user-interface handling in appliance and automotive body-electronics segments. Typical applications include appliance control boards, battery chargers, simple sensor interfaces with on-board ADC conversion, LED/LCD indicator drivers, and low-cost industrial controllers. Designers migrating to flash-based firmware should consider the newer PIC16F716, which Microchip recommends as a functional replacement with in-circuit reprogrammability. Design consideration: the OTP window is write-once, so verify firmware with a windowed or equivalent flash sibling (PIC16F716) before committing to masked production parts. Decouple VDD with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and route the MCLR/VPP trace away from switching nodes to avoid spurious resets. This page synthesizes Microchip PIC16C715 family documentation, current distributor pricing as of 2026-09-18, drop-in same-family replacements, and practical design notes that go beyond what is in the standalone datasheet to assist engineers in sourcing, replacement, and layout decisions.

견적 요청 문의하기

PIC16C716-04E/P

PIC16C716-04E/P - 8-bit OTP MCU, 4MHz, 3.5KB | Microchip

The Microchip Technology PIC16C716-04E/P is a high-performance 8-bit CMOS RISC microcontroller with an integrated 8-bit A/D converter and Capture/Compare/PWM (CCP) peripheral, supplied in an 18-pin PDIP (Plastic DIP-18, 0.300 inch) through-hole package. It operates at up to 4 MHz clock input and delivers a 200 ns instruction cycle, ships with 3.5 KB of OTP program memory (2K x 14) and 128 bytes of data RAM, and offers 13 general-purpose I/O pins. The '04' speed grade (4 MHz) and 'E' (extended) temperature range make it a long-lifecycle component well-suited to industrial and embedded control designs. What is an OTP PIC microcontroller? An OTP (One-Time Programmable) PIC16C-series MCU is a class of 8-bit Reduced Instruction Set Computer (RISC) microcontroller built on EPROM-based program memory, meaning the firmware is burned in by the user exactly once and cannot be erased. The PIC16C architecture belongs to the mid-range PICmicro family, which sits between the baseline PIC10/12 and the enhanced PIC17/18 families in Microchip's 8-bit portfolio. OTPs are preferred over windowed (UV-erasable) parts when code has matured and a low-cost production device is required, and they are commonly used where field re-programmability is unnecessary. Key features include 4 channels of 8-bit A/D conversion, a Timer0 with 8-bit prescaler, a 16-bit Timer1, an 8-bit Timer2, an enhanced CCP module for PWM and capture/compare, a watchdog timer with on-chip RC oscillator, brown-out reset (BOR) circuitry, an in-circuit serial programming (ICSP) interface, and selectable oscillator modes including RC, LP, XT, HS and internal options on related family members. Only 35 single-word instructions keep the learning curve shallow, and most instructions execute in one instruction cycle, leaving more MIPS headroom for the application. Architecturally, the PIC16C716 uses a Harvard-class RISC core with separate program and data buses and a 14-bit-wide instruction word, allowing single-cycle execution for almost all op-codes. Program branches cost two cycles. With a 4 MHz oscillator the core executes 5 MIPS, an attractive figure for the era and still adequate for many slow-control loops today. Typical applications include automotive body and interior electronics, white-goods and appliance control boards, simple sensor interfaces with on-chip ADC, low-cost industrial timers and counters, and consumer products requiring a stable, non-reprogrammable controller. The integrated ADC eliminates an external converter in many designs, while the CCP peripheral reduces external timer/PWM hardware. When designing with this part, choose the PIC16F equivalent if in-circuit reprogrammability is needed in production; reserve the PIC16C OTP for cost-sensitive, code-frozen production runs. Place a 0.1 uF decoupling capacitor close to VDD and follow Microchip's recommended oscillator layout for the chosen resonator or crystal. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, providing a single engineering reference for the PIC16C716-04E/P.

견적 요청 문의하기

PIC16C716-04E/SO

PIC16C716-04E/SO - 4MHz 8-Bit OTP MCU 3.5KB | Microchip

The Microchip Technology PIC16C716-04E/SO is an 8-bit CMOS microcontroller from the PIC16C family, featuring a 4 MHz maximum clock input and 3.5 KB (2K x 14) of One-Time-Programmable (OTP) program memory housed in an 18-pin SOIC package. The device integrates 128 bytes of RAM, 13 digital I/O pins, an 8-bit multichannel A/D converter, a Capture/Compare/PWM (CCP) module, and Brown-out Reset (BOR) circuitry in a single RISC-based core. The -04E speed grade denotes 4 MHz operation with the extended (-40C to +125C) industrial temperature range, suiting it to harsh-environment embedded designs. What is an 8-bit OTP microcontroller? An OTP MCU is a microcontroller whose program memory can be written once during production or prototyping and is permanently retained afterward. It belongs to the broader category of microcontrollers -> embedded processors -> digital ICs -> semiconductors. OTP variants typically offer lower per-unit cost than Flash-based equivalents in high-volume production, while sharing the same instruction set, peripherals, and pinout. The PIC16C716 uses the industry-standard PIC mid-range RISC core executing 35 single-word instructions, most in a single instruction cycle (200 ns at 4 MHz). Key features include: 200 ns instruction cycle for deterministic control loops; 13 bidirectional I/O pins with individual direction control; an 8-bit ADC with multiple channels for sensor interfacing; an 8-bit Timer0 with 8-bit prescaler for timing/counting; and a Capture/Compare/PWM peripheral for motor control or waveform generation. Brown-out Reset holds the MCU in reset when VDD drops below a threshold, preventing code corruption at low supply voltages. The device operates from 4.0 V to 5.5 V with low power consumption, making it well-suited for both line-powered and battery-backed industrial equipment. Architecturally, the PIC16C716 uses a Harvard architecture with separate program and data buses, allowing simultaneous instruction fetch and operand access. Its 14-bit wide program memory word supports compact encoding of opcode plus literal/address, and the 8-bit data path keeps register manipulation efficient. The integrated ADC samples at a rate proportional to Fosc/32, and the CCP module can be configured for input capture, output compare, or PWM generation up to 10-bit resolution. Typical applications include motor speed controllers, sensor signal conditioning front-ends, simple closed-loop fan/valve controllers, appliance control modules, and industrial instrumentation where deterministic real-time response is required. The extended temperature range allows deployment in automotive under-hood, HVAC, and outdoor industrial environments. A key design consideration is that OTP parts cannot be re-programmed in-circuit - code must be fully validated before commitment. Designers typically prototype with the PIC16F716 (Flash) equivalent then migrate to the PIC16C716 for cost-down production. Decoupling capacitors (100 nF + 10 uF) should be placed close to VDD/SS pins, and unused I/O should be configured as outputs low to minimize current draw. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in any single manufacturer datasheet revision, giving procurement and engineering teams a single authoritative reference.

견적 요청 문의하기

PIC16C716-04E/SS

PIC16C716-04E/SS - 8-bit MCU, 4MHz, 3.5KB OTP, SSOP-20 | Microchip

The Microchip Technology PIC16C716-04E/SS is an 8-bit PIC RISC microcontroller built around a Harvard architecture with 3.5 KB of one-time-programmable (OTP) program memory, 128 bytes of RAM, and 13 digital I/O pins, housed in a 20-pin SSOP (Shrink Small Outline Package) rated for the automotive temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and configurable peripherals on one die. PIC microcontrollers from Microchip use a modified Harvard architecture with separate program and data buses, an accumulator-based ALU, and a RISC instruction set where most instructions execute in a single instruction cycle. The PIC16C716 sits in the PIC16 mid-range family and uses the 14-bit instruction word subset. The device operates from 4 MHz and accepts a supply voltage between 4.0 V and 5.5 V. On-chip peripherals include an 8-bit Timer0 with an 8-bit prescaler, a multi-channel 8-bit analog-to-digital converter (ADC), and Brown-out Reset (BOR) circuitry. The 'C' designation indicates the OTP EPROM program memory variant, while the '04' speed suffix marks the 4 MHz maximum clock. The 'E' suffix denotes the extended automotive temperature range of -40 °C to +125 °C. Typical applications include automotive body controllers, sensor signal conditioning, simple motor control loops, and industrial white-goods subsystems where small form factor, on-chip ADC, and BOR supervision eliminate external components. The 20-pin SSOP footprint is also commonly used in handheld instrumentation and low-cost appliance control boards. When laying out a board with the PIC16C716-04E/SS, place the 0.1 µF decoupling capacitor within 3 mm of the VDD pin, route MCLR through a 10 kΩ pull-up, and provide a short, guarded ground return for the analog AVSS/AVDD pair. The internal oscillator or an external crystal on OSC1/OSC2 should be kept clear of switching traces to avoid corrupting the ADC reference. This page aggregates current distributor stock, drop-in alternatives sourced from Microchip cross-reference tools, and design guidance that goes beyond the bare datasheet table, giving embedded engineers a single reference point for sourcing, second-sourcing, and applying the PIC16C716-04E/SS.

견적 요청 문의하기

PIC16C716-04I/P

PIC16C716-04I/P - 8-Bit 4MHz OTP MCU 18-PDIP | Microchip

The Microchip Technology PIC16C716-04I/P is an 8-bit CMOS OTP-based PIC microcontroller running at 4 MHz with 3.5 KB (2K x 14) of program memory, 128 bytes of RAM, and 13 I/O pins, housed in an 18-pin PDIP (DIP-18, 0.300 inch) through-hole package. An 8-bit microcontroller (MCU) is a small computer-on-a-class IC containing a CPU, RAM, non-volatile program memory, and peripherals. The PIC16C716 belongs to the mid-range PIC16 family, sitting hierarchically under: microcontroller -> embedded MCU -> semiconductor. It uses One-Time Programmable (OTP) EPROM rather than Flash, meaning the program memory can be written only once — a fit for cost-sensitive production runs where code is finalized before manufacturing. Key features include a high-performance RISC CPU executing instructions in 200 ns at 20 MHz (5 MHz input), 35 single-word instructions, 4 channels of 8-bit A/D converter, a Capture/Compare/PWM (CCP) module, 2 timers (Timer0 with 8-bit prescaler, Timer2), Brown-out Reset (BOR), and 13 I/O pins with individual direction control. The '04' speed grade denotes 4 MHz and the 'I' suffix indicates the industrial temperature range. The device operates from 4.0 V to 5.5 V and supports in-circuit serial programming (ICSP) via the RB6/RB7 pins. The 18-pin PDIP footprint and PIC mid-range instruction set provide straightforward migration to flash-based siblings such as the PIC16F716 family. Typical applications include consumer appliance control, sensor signal conditioning, low-cost motor control via CCP/PWM, battery chargers, and industrial automation where OTP cost advantages outweigh re-programmability needs. The industrial temperature grade supports -40C to +85C operating environments. When designing with the PIC16C716-04I/P, reserve the RB6/RB7 pins for ICSP programming, include a 100 nF decoupling capacitor adjacent to VDD, and place a bulk capacitor near the analog AVSS/AVDD pair to minimize ADC noise. Because the OTP variant cannot be reprogrammed, choose the PIC16F716-I/P if field re-programmability is required. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C716-04I/SO

PIC16C716-04I/SO - 8-Bit 4MHz OTP MCU, 3.5KB, 13 I/O | Microchip

The Microchip Technology PIC16C716-04I/SO is an 8-bit CMOS RISC microcontroller (MCU) in the PIC16C family, featuring 3.5KB (2K x 14) of One-Time-Programmable (OTP) program memory, 128 bytes of RAM, and 13 digital I/O pins, all integrated in an 18-pin SOIC (SO) package. It executes instructions in a 200 ns single-cycle time using a 4 MHz oscillator (the "-04" speed grade) and operates from 2.5 V to 5.5 V. According to the manufacturer datasheet, the part integrates a 4-channel 8-bit Analog-to-Digital Converter (ADC), two 8-bit timers (Timer0, Timer2), and one 16-bit timer/counter (Timer1) with Capture/Compare/PWM (CCP) capability, addressing applications that need analog sensing plus motor or lighting control. An 8-bit microcontroller (MCU) is a small, single-chip computer that integrates a CPU, RAM, program memory, and peripheral set on one die. Microcontrollers in the PIC16C family use a Harvard RISC core with 35 single-word instructions, are ROM/EPROM/OTP-programmed, and serve embedded control roles ranging from appliance user interfaces to automotive body controllers. The PIC16C716 sits in the mid-range PIC16 lineage - upwards compatible with PIC16C5X and PIC12CXXX devices - and is positioned for cost-sensitive A/D applications in automotive, industrial, appliance, and consumer markets. Key differentiating features include: 4 channels of 8-bit ADC; 13 bidirectional I/O pins; integrated CCP (Capture/Compare/PWM) module for timing-based control; watchdog timer with on-chip RC oscillator for safe recovery from code lockup; power-on reset (POR), power-up timer (PWRT), and brown-out reset (BOR) for reliable start-up; in-circuit serial programming (ICSP) via two pins; and wide 2.5 V to 5.5 V operating voltage. The industrial temperature grade ("-I") supports -40°C to +85°C operation. According to the Microchip product page, this combination of analog and timing peripherals makes the part ideal for "more advanced level A/D applications." Architecturally, the device uses an 8-level deep hardware stack, an 8-bit data path, and a 14-bit instruction word with 200 ns instruction cycle at 4 MHz. The OTP program memory uses EPROM cells, so each part can be programmed once - suitable for low- to mid-volume production but less flexible than flash-based PIC16F equivalents such as the PIC16F716-I/SO. Typical applications include sensor signal conditioning with PWM-driven actuators, automotive sensor interfaces, industrial control front-ends, appliance user-interface boards, and consumer product subsystems that need ADC + timing peripherals. The CCP module enables motor speed or LED brightness control without external hardware. When designing with this part, note that OTP memory requires mask/one-time programming - for prototypes or low-volume runs, prefer the flash-based PIC16F716-I/SO. Decouple VDD with 100 nF + 10 uF ceramic capacitors placed close to the pins, and reserve the MCLR/VPP pin for in-circuit serial programming access. This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C716-04I/SS

PIC16C716-04I/SS - 8-Bit 4MHz MCU, 3.5KB OTP, 20-SSOP | Microchip

The Microchip Technology PIC16C716-04I/SS is an 8-bit CMOS microcontroller from the PIC® 16C family, featuring a 4 MHz CPU core with a 200 ns instruction cycle, 3.5 KB (2K x 14) of One-Time-Programmable (OTP) program memory, 128 bytes of RAM, and 13 general-purpose I/O pins. The device integrates a 4-channel 8-bit Analog-to-Digital Converter (ADC), two additional timers, and a Capture/Compare/PWM (CCP) peripheral, packaged in a 20-pin Shrink Small-Outline Package (SSOP, 5.30 mm body width) for surface-mount assembly. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program + data), and programmable I/O peripherals on one die, allowing engineers to implement embedded control logic with a minimum of external components. The PIC16C716 belongs to the broader category of 8-bit microcontrollers (8-bit -> MCU -> embedded controller -> semiconductor), using Microchip's RISC instruction set with 35 single-word instructions. This architecture is widely used in automotive, industrial, appliance, and consumer applications where deterministic real-time control, low power, and compact code density are required. Key features of the PIC16C716-04I/SS include an operating speed of DC to 4 MHz (the "-04" speed grade), up to 7 internal/external interrupt sources, an 8-level hardware stack, and a 4-channel 8-bit ADC that enables direct interface with analog sensors without external ADC ICs. The two additional timers and CCP module provide flexible PWM generation and input-capture functions for motor control, signal measurement, and timing applications. The PIC16C716 architecture is based on a Harvard-bus RISC core, separating program memory (14-bit wide OTP) from data memory (8-bit wide SRAM) to enable single-cycle instruction execution except for program branches (2 cycles). This pipelined design, combined with the 200 ns instruction cycle at 4 MHz, gives the MCU deterministic throughput well suited to real-time control loops. The industrial temperature grade ("-I") supports an operating range of -40°C to +85°C. Typical applications include sensor signal conditioning, low-cost motor control (small DC fans, solenoids), automotive body controllers, appliance control boards, and battery-powered instruments requiring OTP programmability for cost-effective mid-volume production runs. The 20-SSOP footprint also makes it attractive for compact consumer designs. When designing with this device, note that OTP memory is one-time programmable and cannot be re-flashed; for field-updatable firmware, consider the flash-based PIC16F716 (same 20-SSOP pinout). Always use Microchip's MPLAB X IDE with a compatible programmer (e.g., PICkit 3/4, ICD) for code development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - giving engineers and buyers a faster path from selection to board bring-up.

견적 요청 문의하기

PIC16C716-20/P

PIC16C716-20/P - 8-bit 20MHz OTP MCU w/ ADC & PWM | Microchip

The Microchip Technology PIC16C716-20/P is an 8-bit CMOS OTP-based microcontroller built on the PIC16C architecture, offering 3.5KB (2K x 14) of one-time-programmable program memory, 128 bytes of RAM, and 13 I/O pins in an 18-pin PDIP (Plastic DIP) through-hole package. It operates at up to 20 MHz clock input with a 200 ns instruction cycle, executes 35 single-word instructions, and integrates a 4-channel 8-bit Analog-to-Digital converter, a Capture/Compare/PWM (CCP) module, and a Watchdog Timer for reliable embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, peripherals, and I/O on one die. The PIC16C716 belongs to the PIC16 mid-range family, a lineage that introduced Harvard-architecture 8-bit RISC cores optimized for deterministic real-time control. Within the broader taxonomy, PIC16C716 is an 8-bit MCU, then a mid-range microcontroller, then an OTP-programmable embedded controller, then a semiconductor IC, in that order from most specific to most general. This hierarchical placement helps procurement, schematic review, and AI knowledge-graph retrieval tasks. Key differentiating features include 200 ns instruction execution with single-cycle operation for most instructions, 4 channels of 8-bit A/D for sensor acquisition, a CCP module for PWM motor or LED control, an 8-bit timer/counter plus a 16-bit timer/counter, and a wide 2.5V to 5.5V operating voltage range suitable for both 3.3V and 5V systems. The 13 I/O pins sink/source up to 25 mA per pin, enabling direct LED drive without buffer transistors in many designs. The PIC16C716 uses a Harvard architecture with separated program and data buses, allowing the CPU to fetch an instruction and a data operand in a single cycle. Its OTP EPROM program memory supports prototyping and small-to-medium volume production where field re-programmability is not required. The device is upwards compatible with the PIC16C5X and PIC12CXXX families, easing code migration. Typical applications include automotive sensor interfaces, industrial control loops, white-goods appliance controllers, and consumer-electronics front panels where 8-bit A/D plus PWM in an 18-pin package is an ideal fit. When designing with this device, plan for OTP programming: code must be fully verified before device programming, because OTP cannot be erased or rewritten. Use the in-circuit debugger ICD or emulator during development and migrate to the OTP part for production. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기

PIC16C716-20/SO

PIC16C716-20/SO - 20MHz 8-Bit CMOS OTP MCU | Microchip

The Microchip Technology PIC16C716-20/SO is a high-performance 8-bit CMOS OTP-based microcontroller built on Microchip's mid-range PIC16 architecture, delivering 20 MHz (200 ns instruction cycle) CPU performance with 3.5 KB (2K x 14) of program memory in an 18-pin SOIC (SO) wide-body package. It combines 128 bytes of RAM, 13 digital I/O pins, a 10-bit-resolution 8-channel Analog-to-Digital Converter, two 8-bit timers plus one 16-bit timer, a Capture/Compare/PWM (CCP) module, and a 20 MHz internal oscillator option. The 'C' suffix denotes the One-Time-Programmable (OTP) EPROM program memory variant, and the '20' suffix denotes the 20 MHz maximum clock speed. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, ROM/Flash, I/O, and peripherals onto one die. The PIC16C716 belongs to the PIC16C family, a sub-family of Microchip's classic mid-range microcontrollers that bridges simple baseline PIC12/PIC16C5X devices and enhanced mid-range PIC16F devices. Within the broader taxonomy, this places the part as: microcontroller -> embedded controller -> 8-bit MCU -> CMOS RISC MCU -> PIC16C family -> mid-range core. The mid-range core uses a 14-bit instruction word, supports only 35 single-word instructions, and provides deterministic interrupt latency for real-time control applications. Key differentiating features include the integrated 10-bit ADC (a step up from 8-bit ADC PIC16C7X predecessors), an on-chip CCP module for PWM motor and lighting control, an internal oscillator that can eliminate an external crystal in cost-sensitive designs, and an operating voltage range of 2.5 V to 5.5 V (commercial grade, -40 C to +85 C). With 35 single-word instructions and single-cycle execution on most instructions (program branches take two cycles), the device simplifies firmware development while preserving real-time determinism. Architecturally, the PIC16C716 employs a Harvard RISC core with separate program and data buses, a 14-bit program memory width, and a multi-source interrupt controller. The internal oscillator can be calibrated in software, and the ADC sampling rate is governed by the system clock, enabling accurate conversions at sustained throughput. Power management is supported via SLEEP mode with multiple wake-up sources. Typical applications include automotive sensor signal conditioning, industrial process control loops, white-goods and consumer appliance control boards, battery chargers with PWM regulation, and small motor control. The CCP module makes it especially suitable for brushed DC motor speed control and LED dimming applications. The wide SOIC-18 footprint also aids hand-prototyping and rework. Design tip: when migrating firmware from PIC16C712 to PIC16C716, the ADC and CCP peripherals are enhanced - validate ADC acquisition time and PWM dead-time registers in the new code base. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기

PIC16C716-20I/P

PIC16C716-20I/P - 8-bit CMOS MCU 20MHz 3.5KB OTP 18-DIP | Microchip

The Microchip Technology PIC16C716-20I/P is an 8-bit CMOS RISC microcontroller (MCU) with a 20 MHz maximum operating frequency, 3.5 KB (2K x 14) of One-Time-Programmable (OTP) program memory, and 128 bytes of data RAM, housed in a 18-pin PDIP through-hole package. It integrates a 4-channel 8-bit Analog-to-Digital Converter (ADC), a Capture/Compare/PWM (CCP) module, an 8-bit Timer0 with 8-bit prescaler, a 16-bit Timer1, and a Watchdog Timer with its own on-chip RC oscillator. The -20I suffix denotes a 20 MHz speed grade and the industrial temperature range (-40C to +85C). An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, optimized for embedded control tasks such as reading sensors, driving actuators, and managing communication peripherals. The PIC16C716 belongs to the mid-range PIC16 family within the broader PIC microcontroller portfolio from Microchip, which itself sits in the 8-bit MCU category of the semiconductor hierarchy: PIC16C716 -> PIC16 mid-range family -> PIC microcontroller -> 8-bit MCU -> microcontroller -> embedded IC -> semiconductor. The 'C' in PIC16C indicates EPROM/OTP program memory (as opposed to 'F' for Flash and 'HV' for high-voltage programming). Key features include 13 bidirectional I/O pins with individual direction control, a brown-out reset (BOR) circuit for reliable operation across noisy power rails, and 35 single-word instructions enabling 200 ns instruction execution at 20 MHz. The RISC architecture and Harvard memory layout allow deterministic interrupt response and single-cycle instruction fetch, simplifying real-time firmware design. The PIC16C716 supports applications such as automotive body controllers, industrial sensor signal conditioning, appliance user-interface boards, and consumer product prototypes. The CCP module enables motor-speed control and PWM-driven LED dimming, while the 4-channel ADC directly digitizes analog inputs without an external ADC chip, reducing BOM cost. Combined with the industrial temperature range and the OTP/EPROM program memory that survives harsh electrical environments, this part is well-suited to long-life, low-volume production where flash reprogramming is not required. Designers should note that the OTP program memory is one-time programmable and cannot be field-upgraded - choose the PIC16F716 flash variant if in-application reprogrammability is needed. The 18-pin PDIP package suits through-hole prototype boards and educational labs; for volume production a SOIC-18 variant (PIC16C716-20I/SO) is recommended.

견적 요청 문의하기

하위 카테고리

제품 (38,000+)

PIC16C715-04I/P - 4MHz 8-bit CMOS MCU 3.5KB OTP 18-PDIP | Microchip

PIC16C715-20/P - 8-bit OTP MCU, 20MHz, 3.5KB, 13 I/O, A/D | Microchip

PIC16C715-20/SO - 8-Bit 20MHz OTP MCU 3.5KB 18-SOIC | Microchip

PIC16C715-20E/P - 8-bit CMOS MCU 3.5KB OTP 4ch ADC DIP-18

PIC16C715-20E/SS - 8-bit CMOS MCU, 20MHz, 3.5KB OTP, 20-SSOP

PIC16C715-20I/SO - 8-bit 20MHz OTP MCU, 3.5KB, 13 I/O | Microchip

PIC16C715/JW - 8-Bit 20MHz MCU, 3.5KB EPROM, 18-CERDIP Window | Microchip

PIC16C715T-04/SO - 8-Bit 4MHz OTP MCU 3.5KB | Microchip

PIC16C715T-04/SS - 4MHz 8-bit CMOS OTP MCU w/ ADC | Microchip

PIC16C715T-04I/SO - 8-Bit PIC MCU, 4MHz, 3.5KB OTP, 18-SOIC

PIC16C715T-04I/SS - 8-Bit PIC MCU, 3.5KB OTP, 4MHz, 20-SSOP

PIC16C715T-20/SS - 8-Bit 20MHz OTP MCU 3.5KB EPROM SSOP-20 | Microchip

PIC16C715T-20E/SO - 8-bit OTP MCU, 3.5KB, 20MHz | Microchip

PIC16C715T-20E/SS - 8-bit 20MHz OTP MCU 3.5KB | Microchip

PIC16C715T-20I/SS - 8-bit OTP MCU 3.5KB EPROM 20MHz 20-SSOP | Microchip

PIC16C716-04E/P - 8-bit OTP MCU, 4MHz, 3.5KB | Microchip

PIC16C716-04E/SO - 4MHz 8-Bit OTP MCU 3.5KB | Microchip

PIC16C716-04E/SS - 8-bit MCU, 4MHz, 3.5KB OTP, SSOP-20 | Microchip

PIC16C716-04I/P - 8-Bit 4MHz OTP MCU 18-PDIP | Microchip

PIC16C716-04I/SO - 8-Bit 4MHz OTP MCU, 3.5KB, 13 I/O | Microchip

PIC16C716-04I/SS - 8-Bit 4MHz MCU, 3.5KB OTP, 20-SSOP | Microchip

PIC16C716-20/P - 8-bit 20MHz OTP MCU w/ ADC & PWM | Microchip

PIC16C716-20/SO - 20MHz 8-Bit CMOS OTP MCU | Microchip

PIC16C716-20I/P - 8-bit CMOS MCU 20MHz 3.5KB OTP 18-DIP | Microchip