집적 회로

하위 카테고리

📁 ADC/DAC 2520 제품 📁 증폭기 IC 800 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 314 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1603 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18756 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32865)

PIC24EP32MC203-I/TL - 70 MIPS 32KB Flash Motor MCU | Microchip
PIC24EP32MC203-I/TL

PIC24EP32MC203-I/TL - 70 MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP32MC203-I/TL is a 16-bit Digital Signal Controller from the PIC24E family that delivers up to 70 MIPS of computational throughput at 60 MHz core clock, packaged in a 36-pin VTLA (TL) exposed-pad surface-mount package. The device integrates 32 KB of Flash program memory and 4 KB of SRAM, plus dedicated motor-control peripherals including a Motor Control PWM (MCPWM) module, multiple operational amplifiers, comparators, and a Peripheral Trigger Generator (PTG). Its 3.3V operating voltage and extended industrial temperature range (-40C to +85C) make it suitable for harsh environments. A Digital Signal Controller (DSC) is a hybrid between a microcontroller and a DSP, combining deterministic interrupt-driven control loops with single-cycle MAC instruction execution. Within the broader taxonomy, the PIC24EP32MC203-I/TL sits in the 16-bit MCU hierarchy (microcontroller -> embedded controller -> MCU), and within Microchip's portfolio it belongs to the dsPIC33/PIC24E motor-control line that targets field-oriented control (FOC), brushless DC (BLDC), and switched reluctance drives. Its 70 MIPS performance is well above traditional 8/16-bit MCUs, placing it in the precision motor-control tier where control-loop period is typically 50-100 microseconds. Key features of the PIC24EP32MC203-I/TL include its integrated op-amps that eliminate the need for external current-sense amplifiers in FOC implementations, high-speed ADC channels with dedicated sample-and-hold for current feedback, configurable PWM channels with complementary outputs and dead-time control, and a Peripheral Trigger Generator that offloads real-time sequencing from the CPU. The on-chip op-amps can directly sense motor phase currents through shunt resistors, reducing BOM cost by 3-5 components per phase. The device uses a modified Harvard architecture with separate program and data paths, plus a hardware multiply/divide unit. Its 70 MIPS throughput enables 16 kHz FOC loops with comfortable headroom for state-machine execution. The MCPWM module supports center-aligned PWM with up to 1.5 ns resolution at 70 MHz, allowing precise switching at high motor speeds. The 36-pin VTLA package provides an exposed thermal pad to dissipate the ~70 mA/MIPS active current draw. Typical applications include sensorless BLDC motor control in ceiling fans and pumps, FOC control of drone ESCs, small industrial servo drives, field-oriented control of PMSM motors in robotics, and brushed DC motor control in power tools. Designers typically choose this part when 32 KB of Flash is sufficient (typical FOC firmware uses 20-30 KB) and when integrated op-amps simplify the analog signal chain. When designing with this part, ensure the exposed thermal pad is soldered to a sufficiently large copper pour to keep junction temperature below 125C during sustained motor stall events. For motor control loops above 20 kHz, allocate the 4 KB SRAM carefully to avoid cache misses on the data buffer.

견적 요청 문의하기
PIC24EP32MC203T-E/TL - 16-bit 60 MIPS 32KB Flash MCU | Microchip
PIC24EP32MC203T-E/TL

PIC24EP32MC203T-E/TL - 16-bit 60 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC203T-E/TL is a 16-bit microcontroller from the PIC24EP family, featuring a high-performance PIC core capable of 60 MIPS (70 MHz) operation, 32 KB of Flash program memory (10.7K x 24), and 2 KB of RAM, housed in a 36-pin VTLA (5x5 mm) package with exposed pad for thermal dissipation. A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data memory, and a configurable set of peripherals on a single die. It belongs to the broader category of embedded microcontrollers -> microcontrollers -> integrated circuits -> semiconductors, and is purpose-built for deterministic, real-time control applications where an 8-bit MCU lacks throughput but a full application processor is unnecessary. Key features include an 8-channel, 10-bit/12-bit Analog-to-Digital Converter (ADC) with dedicated Sample-and-Hold, multiple 16-bit timers, motor-control PWMs with complementary outputs and dead-band, UART/USART and SPI/I2C serial peripherals, and a hardware Cryptographic Operation Interface. The 'E' temperature grade covers the -40C to +125C automotive-grade range and supports AEC-Q100 qualification, which is critical for under-hood and chassis electronics. Architecturally, the PIC24EP family uses a 16-bit modified Harvard architecture with separate program and data buses, and the 'MC' device suffix denotes enhanced motor-control peripherals including high-resolution PWM, quadrature encoder interface, and analog comparators optimized for closed-loop field-oriented control. The 60 MIPS throughput enables execution of complex control algorithms such as sensorless FOC and space-vector modulation in single-cycle steps. Typical applications include BLDC/PMSM motor drives, automotive HVAC actuators, LED lighting ballasts, switched-mode power supplies (SMPS), industrial variable-frequency drives (VFDs), and consumer appliance motor control. The combination of deterministic PWM, fast ADC, and AEC-Q100 grade makes it well-suited for safety-critical automotive systems. When designing with this MCU, ensure the exposed pad is soldered to a sufficiently large copper pour to meet thermal dissipation requirements, and decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 5 mm of each pin pair. The on-chip regulator requires an external bulk capacitor. This page synthesizes distributor pricing, verified drop-in alternatives from the PIC24EP family, and practical motor-control design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP32MC203T-I/TL - 32KB Flash Motor Control MCU | Microchip
PIC24EP32MC203T-I/TL

PIC24EP32MC203T-I/TL - 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC203T-I/TL is a 16-bit PIC® microcontroller from the PIC24EP Motor Control family, integrating 32KB of Flash program memory (10.7K x 24), 4KB of RAM, and a 70 MIPS dsPIC® DSC-class core in a 36-pin VTLA exposed-pad package supplied on tape and reel. It operates across an industrial -40C to +85C temperature range and is targeted at high-performance, precision motor control systems. According to the Microchip PIC24EP32MC203 product page, the PIC24E MCUs enable quieter, more energy-efficient motor operation with extended range and life. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and a rich set of on-chip peripherals into a single chip. The PIC24EP32MC203 is built on Microchip's modified Harvard architecture with a 16-bit native datapath, classified within the broader hierarchy: dsPIC DSC -> microcontroller -> embedded processor -> integrated circuit. This device falls within the PIC24E "Motor Control" sub-family, which adds dedicated peripherals such as high-resolution PWM, quadrature encoder interfaces, and high-speed ADCs. Key differentiating features include 6 independent PWM channels with edge-aligned or center-aligned modes, a 12-bit ADC with up to 16 channels and 1.1 Msps conversion rate, 4 op-amps and 4 comparators for signal conditioning of motor currents and back-EMF, plus CAN, I2C, SPI, and UART communication peripherals. The CPU executes most instructions in a single cycle, enabling deterministic motor control loops at 70 MIPS. The PIC24EP32MC203 architecture integrates a 16-bit wide datapath with a 24-bit instruction word, giving it C-compiler efficiency close to 32-bit cores while preserving the small code footprint typical of PIC microcontrollers. The 36-pin VTLA exposed-pad package supports PCB thermal dissipation for the moderate power dissipation typical of motor-control PWMs. Typical applications include sensorless and sensored BLDC motor drives, PMSM field-oriented control (FOC), low-voltage ceiling fans and pumps, appliance motor boards, and small industrial servo drives. The device is also a drop-in choice for HVAC damper control, e-bike controllers, and general-purpose inverter boards. Designers should size the VTLA exposed-pad copper pour according to the dissipated power; for a 0.5W typical dissipation at full CPU/PWM load, a 1 square inch copper pour keeps the junction below the 125C maximum. Crystal-less operation via the internal 7.37 MHz FRC with PLL simplifies BOM cost but is not recommended for CAN baud-rate accuracy. This page synthesizes distributor availability, Microchip PIC24E drop-in alternatives from the same family, and practical thermal and PCB-layout notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP32MC204-E/ML - 32KB Flash 60 MIPS 16-bit Motor MCU
PIC24EP32MC204-E/ML

PIC24EP32MC204-E/ML - 32KB Flash 60 MIPS 16-bit Motor MCU

The Microchip Technology PIC24EP32MC204-E/ML is a 16-bit PIC24E-family microcontroller engineered for high-performance, precision motor control. It integrates 32 KB (10.7K x 24) of Flash program memory and 4 KB of RAM, executes code at 60 MIPS (70 MIPS peak), and is housed in a 44-pin QFN (8x8 mm) package with an exposed thermal pad. The 'MC' suffix indicates dedicated on-chip motor-control peripherals, including PWM, quadrature encoder interface, and high-speed comparators. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program/data memory, peripherals, and I/O on one die. PIC24E devices use a 16-bit modified-Harvard core with DSP-class instructions, sitting between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts in Microchip's portfolio. The PIC24E series extends PIC24F features with higher CPU throughput, more analog, dedicated motor-control PWM, and dual-partition Flash with live-update capability. PIC24EP32MC204 therefore belongs to a category commonly selected for cost-sensitive, deterministic control loops requiring deterministic PWM and signal conditioning. Key features include up to six PWM channels with flexible modes (edge-aligned, center-aligned, complementary outputs with dead-band), a 12-bit ADC with up to 16 channels, three op-amps configurable as PGAs for current sensing, two analog comparators, and a charge time measurement unit (CTMU). The 'E' temperature grade extends operation from -40C to +125C. The 44-QFN package offers a compact 8x8 mm footprint with a thermal pad that lowers theta_JA for higher power dissipation in motor drive stages. At the architecture level, the PIC24EP32MC204 uses Microchip's 16-bit PIC24E core with a 7-stage pipeline, hardware multiply/divide, and DSP-class instructions (MAC, ED, EDAC). It supports dual-partition Flash for in-field live update without shutdown, hardware stack overflow protection, and a 32-bit math library in silicon. The motor-control peripherals are tightly coupled to the core via DMA and dedicated trigger sources, enabling deterministic, low-jitter PWM generation critical for field-oriented control (FOC). Typical applications include 3-phase BLDC and PMSM motor drives (drones, e-bikes, pumps, fans), field-oriented control of AC induction motors, low-cost digital power conversion, LED lighting controllers, and any application needing deterministic PWM with analog feedback. The 32 KB Flash is sufficient for FOC libraries plus sensorless algorithms. When designing with this part, allocate sufficient ground and thermal pad copper to dissipate ~0.7 W in 3-phase BLDC drive stages. Use MPLAB X IDE and the MPLAB XC16 compiler; leverage MotorBench or the Microchip Application Note library for FOC firmware drop-in. Ensure the QSPI/I2S pins are not remapped unless required by the application. This page synthesizes distributor pricing, drop-in same-package alternatives, application notes, and design considerations for engineers comparing PIC24E motor-control MCUs, information not present on any single distributor listing.

견적 요청 문의하기
PIC24EP32MC204-H/ML - 16-bit 70MIPS DSC 32KB Flash 44-QFN | Microchip
PIC24EP32MC204-H/ML

PIC24EP32MC204-H/ML - 16-bit 70MIPS DSC 32KB Flash 44-QFN | Microchip

The Microchip Technology PIC24EP32MC204-H/ML is a 16-bit Digital Signal Controller (DSC) from the PIC24EP Motor Control family, featuring 32KB of Flash program memory, 4KB of RAM, and a maximum CPU speed of 70 MIPS, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device integrates high-speed PWM modules, op-amps, and a 12-bit ADC that are purpose-built for closed-loop motor control applications such as BLDC, PMSM, AC induction, and stepper drives. The "-H" suffix denotes the -40C to +150C extended operating temperature grade for harsh-environment deployments, and the /ML suffix indicates the 44-pin QFN-EP package on a tube carrier. A Digital Signal Controller (DSC) is a hybrid between a microcontroller and a DSP, combining deterministic interrupt-driven control with single-cycle MAC operations for real-time signal processing. DSCs occupy a middle tier in the embedded hierarchy: microcontroller (MCU) -> DSC -> DSP, and sit under the broader embedded computing category. The PIC24EP family in particular targets motor control and digital power conversion, where the dual Harvard architecture and DSP engine can execute Field-Oriented Control (FOC) loops within microseconds while simultaneously servicing peripheral triggers. Key features of the PIC24EP32MC204 include three pairs of complementary PWM outputs with 1.04 ns resolution at 60 MIPS, four on-chip operational amplifiers with programmable gain configurable for current sensing, a 10-bit 1.1 Msps ADC with up to 13 analog input channels, and a CAN 2.0B module plus USB 2.0 full-speed OTG for industrial networking. The integrated op-amps eliminate external current-sense amplifiers, reducing BOM cost and PCB area for field-oriented control implementations. Architecturally, the PIC24EP32MC204 uses a 16-bit modified Harvard core with single-cycle hardware multiplier, supporting C-compiler-friendly instruction set and DSP intrinsics for transforms and filters. Its 70 MIPS throughput at 3.3V gives designers enough headroom for cascaded control loops, while the 1.04 ns PWM resolution produces clean switching waveforms that reduce torque ripple and audible noise. Combined with the extended temperature range, this DSC is positioned for both consumer appliance and industrial drive markets. Typical applications include ceiling fan and appliance motor control, HVAC blowers, e-bike and small EV traction drives, drone ESCs, servo amplifiers, digital PFC stages, and solar micro-inverters. In each of these, the integration of op-amps, PWM, ADC, and CAN reduces external component count while sustaining the control bandwidth needed for sinusoidal commutation. When selecting a 44-pin PIC24E device, verify that the variant's temperature grade, package code, and Flash size match the system requirements. Designers should also confirm the available timer modules and whether USB, CAN, or both are required, since peripherals differ across the GP/MC subgroups. This page consolidates distributor pricing, verified drop-in alternatives, and application notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP32MC204-H/PT - 70 MIPS Motor Control MCU | Microchip
PIC24EP32MC204-H/PT

PIC24EP32MC204-H/PT - 70 MIPS Motor Control MCU | Microchip

The Microchip PIC24EP32MC204-H/PT is a 16-bit 70 MIPS motor-control microcontroller from the PIC24E family, supplied in a 44-pin TQFP (PT) package and rated for the automotive -40C to +150C operating range. The 'H' temperature grade designates a high-temperature variant suitable for under-hood and other harsh-environment deployments. According to the Microchip product page, the part integrates high-speed PWM, on-chip operational amplifiers, and enhanced peripherals tuned for precision motor control, delivering energy-efficient, quieter and longer-life motor systems. A 16-bit MCU (microcontroller unit) is a single-chip computer built around a 16-bit data path, instruction word, and ALU. Within Microchip's taxonomy, PIC24E devices sit between the legacy PIC16/PIC18 8-bit families and the 32-bit PIC32 parts, offering higher throughput than 8-bit cores while retaining the deterministic interrupt model familiar to PIC developers. The PIC24E family in particular is positioned for digital-signal-control applications such as motor control, power conversion, and switching power-supply regulation, where 70 MIPS execution, hardware PWM and on-chip analog make single-chip solutions practical. Key features of the PIC24EP32MC204-H/PT include a 70 MIPS 16-bit dsPIC33/PIC24E core, 32 KB of Flash program memory, 4 KB of SRAM, four on-chip operational amplifiers for current sensing, dedicated high-resolution PWM outputs suitable for sinusoidal motor commutation, and Motor Control PWM peripherals with complementary outputs and dead-time control. The integrated op-amps allow direct interface to low-side current-sense resistors, eliminating external amplifier stages and saving board area. The part also includes multiple UART/SPI/I2C interfaces, a 12-bit ADC, and configurable I/O for encoder or Hall-sensor feedback. Architecturally, the PIC24E core uses a modified Harvard structure with separate program and data buses, hardware MAC/divide, and zero-overhead looping. The internal oscillator and PLL provide flexible clocking from 8 MHz crystals or external sources, and the device supports 5V-tolerant I/O on selected pins. The result is a deterministic, interrupt-friendly MCU tailored for time-critical closed-loop control loops running at kHz to tens-of-kHz update rates. Typical applications for the PIC24EP32MC204-H/PT include BLDC and PMSM motor drives in industrial automation, field-oriented control (FOC) of permanent-magnet synchronous motors, automotive HVAC blower and pump controllers, robotic actuators, ceiling-fan and appliance motor control, and low-voltage battery-powered tools. Its integrated op-amps simplify three-phase current sensing and the high-resolution PWM enables silent sinusoidal drive. When designing with this device, ensure that the high-temperature grade matches your application's worst-case ambient. The PT (TQFP-44) package has moderate thermal headroom; for high-current drive stages, isolate the analog ground from the noisy power ground using Microchip's recommended star-ground layout. Decouple VDD/VSS pairs with 100 nF ceramics as close to the pins as possible. This page synthesizes distributor pricing, parametric data and drop-in alternatives for the PIC24EP32MC204-H/PT that are not available in the standalone datasheet.

견적 요청 문의하기
PIC24EP32MC204-H/TL - 70 MIPS Motor Control MCU, 32KB Flash | Microchip
PIC24EP32MC204-H/TL

PIC24EP32MC204-H/TL - 70 MIPS Motor Control MCU, 32KB Flash | Microchip

The Microchip Technology PIC24EP32MC204-H/TL is a 16-bit PIC24E-family Digital Signal Controller (DSC) delivering 70 MIPS of computational throughput, packaged in a 44-pin VTLA (6x6 mm) surface-mount package. It integrates 32 KB of program Flash, 4 KB of RAM, and on-chip peripherals purpose-built for precision motor control including high-speed PWM, op amps, and 60 MIPS CPU performance. The '-H' suffix indicates the high-temperature grade, while '/TL' designates VTLA tray packaging per Microchip ordering nomenclature. A PIC24E Digital Signal Controller (DSC) is a 16-bit microcontroller that combines traditional MCU capabilities with DSP-grade arithmetic, enabling closed-loop control algorithms like field-oriented control (FOC), space-vector PWM, and sliding-mode observers to run in real time. PIC24E parts sit within Microchip's broader hierarchy: PIC10/12/16/18 (8-bit) -> dsPIC30/33 (16-bit DSC) -> PIC24 (16-bit MCU with DSC features) -> PIC32 (32-bit MIPS/ARM Cortex). The 'MC' family within PIC24EP adds motor-control-dedicated peripherals, positioning the part between general-purpose MCUs and full dsPIC33 motor-control DSCs. Key features include a 70 MIPS modified-Harvard CPU core with single-cycle MAC, dual 10-bit/12-bit ADC capable of 1.1 Msps aggregate throughput, three op-amp comparators for current sensing, configurable logic cells, and a Peripheral Trigger Generator (PTG) for hardware-state-machine event sequencing. Integrated high-resolution PWM supports edge-aligned, center-aligned, and push-pull modes with sub-100 ns PWM resolution at the 70 MHz peripheral clock. Typical applications include BLDC/PMS fan, AC induction drives, switched-reluctance motors, and stepper-servo control loops where the on-chip op amps and PWMs eliminate external analog front-ends. AEC-Q100 qualification (the 'EP' family) supports automotive motor-control subsystems including electric water pumps, oil pumps, fan blowers, and HVAC flaps. When designing with this part, ensure the 60 MHz VCO is configured correctly using the on-chip PLL with the appropriate prescaler, and that the high-speed ADC is paired with the dedicated op-amp channels for current shunt amplification. Reference Microchip AN1078 'Sensorless Field Oriented Control' for a complete FOC software framework that targets this family directly. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24EP family, and practical design notes not consolidated on the manufacturer product page.

견적 요청 문의하기
PIC24EP32MC204-I/ML - 70 MIPS 32KB Flash Motor Control MCU | Microchip
PIC24EP32MC204-I/ML

PIC24EP32MC204-I/ML - 70 MIPS 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC204-I/ML is a 16-bit 70 MIPS motor-control MCU from the PIC24E family, featuring 32KB (10.7K x 24) Flash, 4KB RAM, and on-chip analog peripherals including operational amplifiers, comparators, and high-speed PWM. It is housed in a 44-pin QFN (8x8 mm) package with industrial -40C to +85C temperature rating and supports 3.0V to 3.6V single-supply operation. A 16-bit microcontroller (MCU) is a programmable processor core with 16-bit data paths and instruction set, optimized for embedded control tasks requiring deterministic real-time behavior and moderate code density. The PIC24E family extends this with DSP-like instructions (MAC, bit-reverse addressing), hardware multiply, and 70 MIPS core throughput, fitting between classical 16-bit controllers (PIC24F) and full DSPs (dsPIC33). Motor-control MCUs add specialized peripherals: high-resolution PWM, op-amps to sense phase currents, analog comparators for back-EMF and fault detection, and quadrature encoder interfaces. The hierarchy runs: 16-bit MCU > PIC24E > motor-control variant (PIC24EP...MC...). Key features include six 16-bit PWM outputs with 7.14 ns resolution (at 70 MIPS), four on-chip operational amplifiers configurable for current sensing, three analog comparators with 20 ns response, a 12-bit ADC at 500 ksps with up to 13 channels, and a Peripheral Trigger Generator (PTG) that synchronizes complex timing sequences. The 44-QFN (8x8 mm) exposed-pad package gives a low thermal resistance suitable for closed-loop FOC field-weakening drives up to several hundred watts. Integrated op-amps remove the external sense amplifiers typically required for BLDC or PMSM current-mode control, saving PCB area and BOM cost. Architecturally, the PIC24EP32MC204 uses an enhanced Harvard bus with separate program and data paths, a hardware 17-bit x 17-bit multiplier, and a 16-bit working register array. The on-chip op-amps tie directly to the ADC sample-and-hold, reducing sample-skew errors in three-shunt current reconstruction. The PTG coordinates PWM-ADC timing without CPU intervention, achieving deterministic current-loop sampling at sub-microsecond jitter - critical for sinusoidal and field-oriented control loops. Typical applications include sensorless and sensored BLDC/PMSM motor drives (fans, pumps, e-bikes, drones), field-oriented control of three-phase inverters, stepper and DC servo position loops, and low-power digital power conversion. Industrial -40C to +85C operation supports factory automation, white goods, and HVAC blower controllers. When designing, route the PCB exposed pad directly under the MCU to a top-layer copper pour (at least 25 mm^2) to dissipate the QFN heat. Keep analog op-amp inputs and PWM outputs short and symmetric. Use the PTG to trigger ADC sampling mid-PWM pulse to avoid switching transients corrupting current readings. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP32MC204-I/PT - 70 MIPS 32KB Flash Motor Control MCU | Microchip
PIC24EP32MC204-I/PT

PIC24EP32MC204-I/PT - 70 MIPS 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC204-I/PT is a 16-bit PIC24E family microcontroller engineered for high-performance motor control, delivering 70 MIPS of computational throughput at 70 MHz from 32KB (10.7K x 24) of on-chip Flash program memory in a 44-pin TQFP (10x10 mm) package. What is a 16-bit motor control MCU? A 16-bit microcontroller is a single-chip computer with a 16-bit data path and integrated peripherals designed to balance deterministic real-time control with sufficient throughput for closed-loop algorithms. The PIC24E series, positioned in the dsPIC33/PIC24 hierarchy as a high-performance digital signal controller family, integrates motor-control-centric peripherals such as high-speed PWM, op-amps, and comparators alongside the CPU. The PIC24EP32MC204 belongs to the "MC" (motor control) sub-family within dsPIC33/PIC24 devices. Key features include 4KB RAM, a C compiler-friendly modified Harvard architecture, a 12-bit ADC with up to 1.2 Msps sampling, three analog comparators with programmable reference, two operational amplifiers for current sensing, and Motor Control PWM (MCPWM) outputs capable of driving 3-phase BLDC, PMSM, and ACIM inverters. The device operates from 3.0 V to 3.6 V and supports an industrial -40C to +85C temperature range. On the silicon level, the PIC24EP32MC204 combines a 16-bit modified-Harvard core with DSP extensions and a deterministic interrupt controller. Hardware multipliers, zero-overhead looping, and dual-port SRAM enable the cycle-accurate execution of field-oriented control (FOC) and space-vector modulation (SVM) routines without software jitter. Typical applications include sensorless and sensored BLDC/PMSM motor drives (FOC and trapezoidal commutation), industrial servo control, drone ESCs, appliance motor control (washing machines, pumps, fans), and field-oriented-control inverters. The integrated op-amps and comparators minimize external signal-conditioning for current shunt monitoring. When designing with the device, leverage the integrated op-amps for inline current sensing and the high-resolution PWM for sub-microsecond dead-band control. Pair it with a 3-phase gate driver such as the Microchip MCP8024 or a discrete driver stage to complete the inverter. This page consolidates distributor pricing, drop-in package-compatible alternatives in the TQFP-44 (10x10) footprint, and practical design notes not found in the manufacturer datasheet, accelerating sourcing and schematic review.

견적 요청 문의하기
PIC24EP32MC204-I/TL - 16-bit 70 MIPS 32KB Flash MCU | Microchip
PIC24EP32MC204-I/TL

PIC24EP32MC204-I/TL - 16-bit 70 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC204-I/TL is a 16-bit microcontroller from the PIC24EP motor-control family, delivering 70 MIPS core performance with 32 KB of Flash program memory (10.7K x 24) in a compact 44-pin VTLA (6x6 mm) package with an exposed thermal pad. What is a PIC24EP MCU? PIC24EP devices are high-performance 16-bit digital signal controllers (DSCs) from Microchip's dsPIC/PIC24 family. They combine a modified Harvard CPU with DSP engine, MAC operations, and motor-control peripherals (high-speed PWM, op amps, ADC) on a single die. In the wider taxonomy they sit as 16-bit microcontrollers -> microcontrollers -> embedded processors -> semiconductors, so the tradeoff vs 8-bit PIC MCUs is roughly 10x performance at similar cost, and vs Cortex-M parts they offer single-cycle MAC plus deterministic interrupt latency. Key features include 32 KB self-programmable Flash, 2 KB RAM, 4 KB auxiliary Flash, 70 MIPS operation at 3.3 V, an integrated 10-bit 1.1 Msps ADC, three op amps, three comparators, six PWM channels with 1.04 ns resolution, and USB 2.0 full-speed OTG with on-chip transceiver. The 44-pin VTLA package has an exposed pad (EP) that doubles as both a thermal relief and a low-impedance ground connection. The PIC24EP32MC204 uses a 16-bit modified Harvard architecture with hardware MAC and DSP support, enabling closed-loop motor control, power conversion, and sensorless BLDC algorithms. The 3.3 V core runs at 70 MIPS from a 7.37 MHz internal FRC plus PLL, while a separate 32 kHz low-power oscillator handles sleep modes. Wide memory buses (24-bit instructions, 16-bit data) sustain throughput even with parallel PWM duty-cycle updates. Typical applications include BLDC/PMSM motor drives, sensorless fan control, low-power field-oriented control (FOC), LED lighting drivers, and small-form-factor industrial automation. The combination of fast PWM, integrated op amps for current sensing, and 5V-tolerant I/O makes it suited for appliance, HVAC, and automotive auxiliaries. When designing with this MCU, allocate the exposed pad as a continuous ground pour with at least 8 thermal vias to dissipate up to 0.5 W continuous power. Use the internal FRC with PLL for low-BOM designs, but calibrate against a crystal when USB or CAN timing requires sub-percent accuracy. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC24EP family, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP32MC204T-E/ML - 16-bit 60 MIPS Motor Control MCU | Microchip
PIC24EP32MC204T-E/ML

PIC24EP32MC204T-E/ML - 16-bit 60 MIPS Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC204T-E/ML is a 16-bit PIC24E motor-control microcontroller with 60 MIPS performance, 32 KB Flash program memory organized as 10.7K x 24 words, and 2 KB SRAM, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The device operates from a 3.0 V to 3.6 V supply, integrates a high-speed PWM module, 10-bit ADC, op amps, and quadrature encoder interface, and is AEC-Q100 qualified for automotive motor-control environments. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and programmable peripherals. The PIC24E family uses a 16-bit modified Harvard architecture with a fast 2-cycle multiplier and DSP-friendly instructions, placing it in the broader hierarchy of digital signal controllers (DSC) -> microcontroller -> embedded processor -> semiconductor. The PIC24E line bridges 8-bit PIC MCUs and 32-bit parts, targeting applications that need deterministic real-time control without paying for Cortex-M class resources. Key features of this variant include 6 high-speed PWM channels with 7.5 ns resolution, four 10-bit ADC modules sharing 32 sample-and-hold channels, two op amps configurable as gain stages or comparators, two comparators, a quadrature encoder interface (QEI), and 35 I/O pins tolerant to 5 V. The automotive-grade -E temperature range spans -40C to +125C and the part carries AEC-Q100 qualification for under-hood and chassis deployments. The PIC24EP32MC204T-E/ML is built on a low-power CMOS process and includes a 4-channel DMA controller that offloads data movement from the CPU, leaving MIPS available for control loops. The peripheral trigger generator (PTG) chains ADC, PWM, and DMA events without CPU intervention, enabling deterministic timing critical for field-oriented control (FOC) of PMSM/BLDC motors. Typical applications include automotive HVAC blowers, electric water pumps, fuel and oil pumps, BLDC and PMSM motor drives, e-bike controllers, and small industrial servo drives. The combination of QEI, op amps, and high-resolution PWM in a single QFN-44 footprint reduces the BOM and PCB area required for a complete sensorless or sensored FOC drive. When designing with this part, budget peripheral remapping carefully - many analog and digital pins are multiplexed - and reserve the exposed pad for thermal relief because motor-drive firmware can keep the MCU continuously active. The -E temperature grade and AEC-Q100 qualification also make this the right choice when automotive certification is required. This page synthesizes verified distributor pricing, same-family drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers select and qualify this part faster.

견적 요청 문의하기
PIC24EP32MC204T-E/PT - 60 MIPS 32KB Flash Motor MCU | Microchip
PIC24EP32MC204T-E/PT

PIC24EP32MC204T-E/PT - 60 MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP32MC204T-E/PT is a 16-bit PIC24E-series microcontroller engineered for high-performance, precision motor control, delivering 60 MIPS of processing throughput at up to 70 MIPS CPU performance in a 44-pin TQFP (10x10 mm) package. It integrates 32KB of Flash program memory organized as 10.7K x 24 words with 4KB of SRAM, and includes on-chip peripherals specifically tuned for closed-loop motor control such as a high-speed Motor Control PWM (MCPWM) module, a Quadrature Encoder Interface (QEI), three operational amplifiers for current sensing, and four analog comparators. The PIC24E core supports DSP instructions and a deterministic interrupt model, making this MCU suitable for real-time control loops. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one silicon die. The PIC24EP32MC204T-E/PT belongs to the PIC24E "Motor Control" sub-family, which sits within the broader PIC24 16-bit MCU family -> dsPIC30/dsPIC33 DSC family -> Microchip 16-bit MCU portfolio -> Microcontroller hierarchy -> Embedded processing -> Semiconductor taxonomy. This family is purpose-built for digital power conversion, field-oriented control (FOC), and sensorless motor drives. Key differentiating features include AEC-Q100 automotive qualification for the -E temperature grade, integrated op-amps that eliminate external current-sense circuitry, and a 12-bit ADC with up to 500 ksps throughput. The MCPWM module offers complementary PWM outputs with programmable dead time, fault inputs, and ADC triggering - critical for three-phase inverter half-bridges. The QEI block accepts A/B/INDEX signals directly from incremental encoders for rotor-position feedback. Typical applications include BLDC/PMSM motor drives for e-mobility, automotive HVAC actuators, drone ESCs, industrial servo drives, and sensorless fan/pump controllers. The wide -40C to +125C operating range and integrated analog front-end allow the device to replace multiple discrete components, shrinking BOM and PCB footprint. Design tip: route the analog op-amp outputs and ADC inputs on a separate ground island tied to the MCU's AGND pin to minimize switching-noise coupling. Estimated: at 60 MIPS with all peripherals active, IDD is typically 30 mA at 3.3V. Decouple VDD/VSS pairs with 100 nF X7R caps within 2 mm of each pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP32MC204T-I/ML - 70 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP32MC204T-I/ML

PIC24EP32MC204T-I/ML - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip PIC24EP32MC204T-I/ML is a 16-bit high-performance PIC24E motor control MCU running at 70 MIPS, equipped with 32 KB Flash (10.7K x 24) and 4 KB RAM, housed in a 44-pin QFN (8x8 mm) package. The trailing "T" in the part number indicates Tape and Reel packaging, the "I" denotes the industrial -40C to +85C operating range, and "/ML" specifies the 44-QFN (8x8) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program, SRAM for data), and on-chip peripherals such as ADCs, timers, and communication interfaces. Within the broader taxonomy, the PIC24EP32MC204 belongs to the digital signal controller (DSC) class, which combines MCU simplicity with DSP-class math performance. The "PIC24EP" family specifically targets motor control and power-conversion applications with enhanced PWM, op-amps, and comparators integrated on-die. Key features include a 70 MIPS modified Harvard CPU core with DSP engine, 32 KB self-programmable Flash with ECC, 4 KB SRAM, three on-chip op-amps, four high-speed 10-bit MCPWM modules with up to 7.26 ns PWM resolution, four 12-bit SAR ADCs at 500 ksps, three analog comparators, a Peripheral Trigger Generator (PTG), and a Charge Time Measurement Unit (CTMU). The integrated analog front end eliminates external op-amps in most Field-Oriented Control (FOC) motor loops, reducing BOM cost and PCB area. The PIC24E core executes most instructions in one cycle and supports fractional and integer DSP operations through its MAC unit. With QEI (Quadrature Encoder Interface) and 70 MIPS throughput, the device supports FOC and sensorless motor control algorithms in real time. The 44-QFN package exposes 35 I/O pins, two UART/SPI/I2C modules, and one ECAN interface, providing flexible connectivity for sensor and actuator networks. Typical applications include BLDC/PMSM motor drives (drones, e-bikes, fans, pumps), industrial servo controllers, field-oriented control inverters, switched-mode power supplies with digital control loops, and consumer appliances with variable-speed compressors. The integrated op-amps and comparators allow direct current-sensing on the low-side shunt resistors used in three-phase inverters. When designing with this MCU, place 100 nF decoupling capacitors adjacent to every VDD/VSS pair and reserve the exposed pad (EP) as a single contiguous ground pour for thermal dissipation. Use the PTG for deterministic ADC-to-PWM sequencing to minimize torque ripple. Programming is via the ICSP interface using MPLAB X IDE with the XC16 compiler. This page synthesizes DigiKey and Octopart distributor pricing, same-brand drop-in alternatives, and practical design notes not aggregated on the manufacturer datasheet.

견적 요청 문의하기
PIC24EP512GP202-E/MM - 512KB Flash 16-bit MCU | Microchip 28-QFN
PIC24EP512GP202-E/MM

PIC24EP512GP202-E/MM - 512KB Flash 16-bit MCU | Microchip 28-QFN

The Microchip Technology PIC24EP512GP202-E/MM is a high-performance 16-bit microcontroller from the PIC24EP family, delivering 60 MIPS throughput at up to 70 MIPS with a 512 KB Flash program memory and 48 KB RAM in a compact 28-pin QFN-S (6x6 mm) package. The -E suffix denotes an extended temperature grade of -40°C to +125°C, making this part suitable for industrial and harsh-environment designs. A 16-bit microcontroller (MCU) is a programmable processor that executes instructions on 16-bit data words, bridging the gap between 8-bit controllers and 32-bit processors in the embedded semiconductor hierarchy: 8-bit MCU → 16-bit MCU → 32-bit MCU → microprocessor. The PIC24EP family sits in the high-performance tier of Microchip's 16-bit portfolio, offering DSP-class instruction support, single-cycle MAC, and rich analog peripherals while retaining the deterministic interrupt model familiar to PIC developers. Key features include 512 KB self-programmable Flash (170K × 24 organization), 48 KB SRAM, dual 3.2 MSPS 10/12-bit ADC with up to 10 channels, two on-chip op-amps, two comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for hardware-state-machine peripheral sequencing. Communication peripherals cover up to two UART, two SPI, two I2C, and one ECAN module, while motor-control needs are met by the 70 MIPS PWM/OC/PWM with eight 16-bit timers. The device operates from 3.0 V to 3.6 V and offers extensive oscillator flexibility with PLL, 8 MHz internal FRC, and external crystal support. Architecturally, the PIC24E core combines a modified Harvard bus with 24-bit instruction words, 16 working registers, and C-friendly addressing, enabling efficient C-compiler code density. The integrated op-amps and comparators eliminate external analog front-end components in sensor-interface applications, while the CTMU supports capacitive-touch and time-of-flight measurements without an external timing ASIC. Typical applications include industrial motor control (BLDC, PMSM, stepper drives), medical patient-monitoring instrumentation, smart energy metering with CT/PT front-ends, automotive body electronics (CAN-connected ECUs), high-performance sensor hubs, and LED lighting controllers. Designers also deploy the device in UPS power-conversion feedback loops and digital-power PFC stages where the PTG offloads critical timing from the CPU. When designing with this MCU, place decoupling capacitors within 2 mm of each VDD/VSS pin pair and route the analog AVdd/AVss pair through a ferrite bead for ADC noise isolation. Use the Alternate I/O feature to remap peripherals to optimal PCB locations, and reserve one DMA channel for high-throughput ADC-to-memory transfers to keep the CPU available for control loops. This page synthesizes XAIPART distributor pricing, verified Microchip same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP512GP202-E/SO - 16-bit 60 MIPS 512KB Flash MCU | Microchip
PIC24EP512GP202-E/SO

PIC24EP512GP202-E/SO - 16-bit 60 MIPS 512KB Flash MCU | Microchip

The Microchip PIC24EP512GP202-E/SO is a 16-bit microcontroller from the PIC24E general-purpose family, featuring a high-performance 60 MIPS (70 MIPS device core rating) dsPIC30/dsPIC33-style CPU core with up to 512 KB Flash program memory and 48 KB RAM, packaged in a 28-pin SOIC (SO) wide-body IC package. It integrates advanced analog peripherals including on-chip operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), a 10/12-bit ADC and the Peripheral Trigger Generator (PTG), making it suitable for mixed-signal embedded designs. The -E suffix denotes the extended industrial temperature grade of -40 °C to +125 °C, and the device is AEC-Q100 qualified for automotive applications. A 16-bit microcontroller (MCU) is a single-chip computer that combines a 16-bit CPU, non-volatile program memory (Flash), volatile data memory (RAM), and a configurable set of peripherals (timers, ADC, communication controllers, GPIO). The PIC24E architecture is a modified Harvard machine with a 16-bit instruction word optimized for C-compiled code density; it sits within the broader taxonomy of MCU -> 16-bit MCU -> PIC microcontroller -> PIC24E family. The 60 MIPS throughput and 16-bit data path deliver substantial headroom for closed-loop control, signal processing, and protocol stacks compared to 8-bit predecessors while keeping the PIC ecosystem tool-chain (MPLAB X, XC16) and peripheral library. Key features of the PIC24EP512GP202-E/SO include 512 KB Flash (170K x 24 single-word instructions), 48 KB RAM, 21 general-purpose I/O, USB 2.0 Full-Speed On-The-Go peripheral, two UART/SPI/I2C modules, two I2S interfaces, three op-amps, two comparators, a 10/12-bit ADC with up to 1 Msps, a CTMU for capacitive touch and time-of-flight measurements, and the Peripheral Trigger Generator for autonomous peripheral sequencing. The integrated 7.37 MHz internal FRC oscillator can be paired with the 4x PLL to reach the 60 MIPS top speed without external crystals. Architecturally, the PIC24EP uses a wide 16-bit datapath with a 24-bit instruction word that improves code density relative to 32-bit ARM Cortex-M0 cores, while exposing deterministic interrupt latency and a single-cycle hardware multiplier. The PTG is a small event sequencer that lets peripherals trigger one another without CPU intervention, freeing CPU bandwidth for application logic. Typical applications include automotive body and sensor nodes, industrial motor control pre-drivers, multi-channel sensor aggregation hubs, USB device/host peripherals, and consumer audio front-ends. The CTMU and on-chip op-amps enable direct interface to resistive/capacitive sensors without external signal conditioning. When designing, prioritize placing decoupling capacitors within 3 mm of every VDD/VSS pin pair and route the USB DP/DM pair as a 90-ohm differential on a continuous reference plane. Review the device errata (DS80000468) and use the latest MPLAB XC16 compiler to take advantage of updated silicon revisions. This page consolidates distributor pricing, qualified drop-in alternatives within the PIC24E family, and practical design notes that complement (but do not replace) the manufacturer datasheet.

견적 요청 문의하기
PIC24EP512GP202-I/MM - 16-bit 70 MIPS 512KB Flash MCU | Microchip
PIC24EP512GP202-I/MM

PIC24EP512GP202-I/MM - 16-bit 70 MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512GP202-I/MM is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 70 MIPS performance at 3.3V with 512 KB of Flash program memory (170K x 24) and 48 KB of RAM, housed in a 28-pin VQFN (6x6 mm) package with exposed thermal pad. The 'GP' family designation signifies its general-purpose positioning, with on-chip peripherals including op amps, a CTMU, advanced ADC, and the Peripheral Trigger Generator (PTG) for high-end embedded control applications. A 16-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating a CPU, non-volatile Flash program memory, volatile data RAM, and a rich peripheral set (ADC, timers, communication controllers) onto a single die. Compared to 8-bit MCUs, 16-bit cores offer higher arithmetic throughput, wider data paths, and DSP-friendly instruction sets while retaining deterministic real-time behavior. PIC24EP devices sit in Microchip's mid-range dsPIC/PIC24 portfolio above PIC18 and below dsPIC33/PIC32, offering a balance of cost, code density, and analog integration. Key features include the high-performance 70 MIPS CPU core with modified Harvard architecture, 512 KB self-programmable Flash, 48 KB SRAM, up to 25 MIPS single-cycle DSP support, and a 10/12-bit ADC with up to 1.1 Msps conversion rate. The device integrates operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and the Peripheral Trigger Generator for hardware-state-machine timing. Communication peripherals cover UART, SPI, I2C, and ECAN, while up to 21 I/O pins support mappable peripheral functions. The PIC24EP512GP202 uses a 3.0V to 3.6V single-supply core with separate analog and digital voltage domains, providing excellent noise immunity for mixed-signal designs. The PTG peripheral is a unique feature that sequences ADC, PWM, and I/O triggers without CPU intervention, freeing the core for application-level tasks. With 70 MIPS, the device can execute complex control loops, sensor-fusion routines, and digital filtering in real time. Typical applications include industrial motor control (BLDC/PMSM field-oriented control), digital power conversion (digital PFC, LLC, phase-shifted full-bridge SMPS), sensor signal conditioning using integrated op amps, CAN-connected automotive body/comfort modules, medical instrumentation, and high-performance general-purpose embedded control. The 28-QFN (6x6) footprint suits compact board layouts where small size and good thermal dissipation are both required. When designing with this part, ensure decoupling per the datasheet (typically 100 nF + bulk close to VDD/AVDD pins), and note that exposed-pad QFN packages require thermal vias beneath the pad for rated operation. Verify programming via Microchip's MPLAB X IDE with the XC16 compiler; programmers include ICD 4, MPLAB SNAP, and PICkit 4. This page consolidates distributor pricing, package alternatives, and design notes that extend beyond the manufacturer datasheet to accelerate BOM selection.

견적 요청 문의하기
PIC24EP512GP202-I/SO - 70 MIPS 512KB Flash 16-bit MCU | Microchip
PIC24EP512GP202-I/SO

PIC24EP512GP202-I/SO - 70 MIPS 512KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24EP512GP202-I/SO is a 16-bit microcontroller from the PIC24E general-purpose MCU family, delivering 70 MIPS performance, 512KB of Flash program memory, and 48KB of RAM in a 28-pin SOIC wide-body package. Operating from 3.0V to 3.6V across an industrial temperature range of -40°C to +85°C, the device integrates advanced analog peripherals including operational amplifiers, comparators, a 10-bit ADC and DAC, the CTMU (Charge Time Measurement Unit), and the Peripheral Trigger Generator (PTG) for high-end general-purpose applications. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program and data memory, and programmable peripherals. The PIC24E architecture is a 16-bit modified Harvard RISC design optimized for deterministic real-time performance with DSP extensions, making it part of the broader category of digital signal controllers (DSC) that bridges traditional 8-bit MCUs and full DSP processors. Within Microchip's portfolio, it sits between the dsPIC33 (DSC) and the PIC32 (32-bit) families. Key differentiating features include superior ADC performance at up to 1.1 Msps with 12-bit resolution, four on-chip operational amplifiers configurable for signal conditioning, the CTMU enabling capacitive touch and precise time measurement, and the PTG peripheral for hardware-triggered sequencing of events without CPU intervention. The 512KB Flash (170K x 24 instruction words) and 48KB RAM allow complex firmware stacks while leaving room for bootloader and data-logging applications. Typical applications span industrial motor control, power conversion, advanced sensor signal conditioning, capacitive touch human-machine interfaces, medical instrumentation, and high-performance consumer embedded systems. The wide SOIC package simplifies prototyping and rework versus QFP or QFN alternatives, which is valuable for low-volume industrial designs. When designing with the PIC24EP512GP202, ensure VDD decoupling follows Microchip's recommended 0.1 µF + bulk capacitor placement, route analog and digital grounds per the datasheet's AGND/DGND layout guideline, and verify that the chosen programming/debug tool (such as MPLAB ICD 4 or PICkit 4) supports the 70 MIPS device ID. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP512GP202T-E/MM - 16-Bit 60 MIPS 512KB Flash MCU | Microchip
PIC24EP512GP202T-E/MM

PIC24EP512GP202T-E/MM - 16-Bit 60 MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512GP202T-E/MM is a high-performance 16-bit PIC microcontroller from the PIC24EP family, featuring a 60 MIPS modified Harvard CPU core, 512 KB of Flash program memory, 24 KB of RAM, and a 28-pin QFN-S (6x6 mm) exposed-pad package. It targets general-purpose embedded applications that require a balance of code density, computational throughput, and rich analog peripherals. What is a PIC microcontroller? A PIC microcontroller (Programmable Intelligent Computer) is a Harvard-architecture microcontroller family produced by Microchip Technology, in which program and data memories use separate buses to enable simultaneous instruction fetch and data access. The PIC24EP sub-family specifically belongs to the 16-bit dsPIC33/PIC24E 'enhanced' family — a digital signal controller (DSC) lineage that adds DSP-class instructions, hardware multiply, and zero-overhead looping on top of standard PIC MCU peripherals. PIC24EP sits in the taxonomy: PIC24E 16-bit DSC -> PIC24EP general-purpose series -> Microcontroller -> Microcomputer -> Semiconductor. Key features include a 12-bit ADC with up to 500 ksps conversion rate, two on-chip operational amplifiers, three analog comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) that sequences ADC and PWM conversions autonomously. Communication interfaces include I2C, SPI, UART/USART, IrDA, and LINbus. The device operates across an industrial -40 °C to +125 °C extended temperature range and is qualified to the E (extended) tier. Technically, the PIC24EP core executes most instructions in a single cycle and integrates a hardware 16x16 multiply, dual 40-bit accumulators, and a deterministic interrupt controller with up to 118 interrupt vectors. The PPS (Peripheral Pin Select) system allows digital peripherals to be remapped to any I/O, simplifying PCB routing. The integrated op amps and comparators eliminate external analog front-end in many sensor-conditioning designs, while the PTG offloads timed sequencing from the CPU. Typical applications include industrial motor control, sensor signal conditioning, lighting ballast control, low-cost digital power conversion, automotive body and comfort modules, and consumer white goods requiring extended-temperature operation. The compact 6x6 mm QFN-S footprint is well-suited to space-constrained PCB designs. When designing with this MCU, place a 100 nF decoupling capacitor directly at each power pin and connect the exposed pad to a continuous ground plane to handle thermal dissipation. Allocate one ICP / ICD pin pair for in-circuit programming and debugging, and verify VDD/Vcap bulk capacitance against the PLL datasheet figure when running at 60 MIPS. This page synthesizes distributor pricing, drop-in cross-reference data, parametric comparisons, and practical PCB layout notes that are not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP512GP204-E/ML - 16-bit 60 MIPS MCU, 512KB Flash | Microchip
PIC24EP512GP204-E/ML

PIC24EP512GP204-E/ML - 16-bit 60 MIPS MCU, 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP204-E/ML is a 16-bit PIC24E general-purpose microcontroller featuring a high-performance 70 MIPS core, 512 KB Flash program memory, and 48 KB SRAM, housed in a 44-pin QFN (8x8 mm) package. It supports up to 60 MIPS operation with a 16-bit modified Harvard architecture, dual-port SRAM, and tightly-coupled DSP-friendly instructions. The on-chip peripherals include 12-bit ADC at 500 ksps, operational amplifiers, comparators, CTMU, and a Peripheral Trigger Generator (PTG) for offloading complex event sequencing from the CPU. A PIC microcontroller is a compact microcontroller unit based on Microchip's proprietary PIC architecture that integrates a CPU, memory (Flash, SRAM, EEPROM), and peripherals on a single die. PIC24E devices sit in the 16-bit DSP-enhanced tier of the PIC family, bridging 8-bit PIC16/PIC18 controllers and 32-bit PIC32MX devices, and they belong to the broader power-management-and-control category of embedded MCUs. This product family is widely used in motor control, power conversion, and signal-processing applications where deterministic interrupt latency and DSP MAC instructions matter. Key features of the PIC24EP512GP204 include 35 channels of 12-bit ADC, three op-amps internal to the die, four analog comparators with configurable reference, six 16-bit timers, motor-control PWMs with independent duty cycles, USB 2.0 full-speed On-The-Go, and a Peripheral Trigger Generator that chains ADC, PWM, and DMA events without CPU intervention. The device operates from 3.0 V to 3.6 V (industrial -40C to +125C) and supports up to 35 general-purpose I/O pins on this 44-pin variant. Architecturally, the PIC24E core delivers one instruction per two clock cycles at 70 MIPS maximum (FCY = FOSC/2 with FOSC up to 140 MHz for the 70 MIPS variants; the -E part number indicates -40C to +125C operating range and 60 MIPS maximum). A 16-word by 16-bit register file with hardware zero-overhead looping makes the device attractive for control loops and digital filtering. Typical applications for the PIC24EP512GP204-E/ML include three-phase motor control (BLDC, PMSM, ACIM), digital power conversion (PFC, LLC, full-bridge), industrial sensor conditioning using the on-chip op-amps, USB-CDC/HID human-interface devices, and audio/signal-processing front-ends. Designers favor it when migrating from PIC24F or dsPIC33F to gain code density, ADC speed, and DSP instructions while keeping the MPLAB X toolchain. When designing with this part, allocate at least one ground pin per power pin, use a 10 uF plus 0.1 uF decoupling combination near VDD/AVDD pairs, and follow Microchip's QFN PCB layout guidelines for the 8x8 mm exposed pad (thermal pad must be soldered for rated thermal performance). Consider the PIC24EP512GP204-I/ML variant for -40C to +85C industrial runs and the 70 MIPS /P or /PT variants for higher-throughput deployments. This page synthesizes distributor pricing, parametric cross-references, and practical design notes not found in the manufacturer datasheet alone, giving engineers a faster path to a validated BOM for -40C to +125C embedded-control designs.

견적 요청 문의하기
PIC24EP512GP204-E/MV - 16-bit 60MIPS MCU, 512KB Flash, UQFN-48 | Microchip
PIC24EP512GP204-E/MV

PIC24EP512GP204-E/MV - 16-bit 60MIPS MCU, 512KB Flash, UQFN-48 | Microchip

The Microchip Technology PIC24EP512GP204-E/MV is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 70 MIPS of computational throughput and integrating 512 KB Flash, 48 KB RAM, and 4 KB EEPROM into a compact 48-pin UQFN (6x6 mm) package. It is qualified to the AEC-Q100 automotive reliability standard and operates across the extended -40C to +125C temperature range, making it suitable for safety-critical and industrial-grade designs. A 16-bit microcontroller (MCU) is an embedded processor that combines a CPU core, non-volatile program memory, data RAM, and configurable peripherals on a single die. Within the broader taxonomy, PIC24EP devices sit between 8-bit PIC MCUs and 32-bit ARM Cortex-M parts, offering higher performance and DSP-friendly instruction set than 8-bit PICs while remaining easier to learn than 32-bit cores. Microchip's 16-bit dsPIC/PIC24 line has historically been used in motor control, power conversion, and signal-conditioning applications where math density matters but Cortex-M cost is overkill. Key features include up to 512 KB self-programmable Flash with live-update capability, 48 KB SRAM, an enhanced ADC with up to 12-bit 1.1 Msps performance, on-chip operational amplifiers, comparators, a Charge Time Measurement Unit (CTMU), and the Peripheral Trigger Generator (PTG) for hardware-driven sequencing. The integrated op amps reduce external analog component count, while CTMU enables capacitive touch and time-domain temperature measurement. Communication interfaces include multiple UART, SPI, I2C, and ECAN peripherals, providing design flexibility for connected and networked systems. Architecturally, the PIC24EP512GP204-E/MV uses a modified Harvard architecture with a wide 24-bit instruction word and 16-bit data path. This design gives excellent code density for C and assembly while preserving the deterministic interrupt response that 16-bit PIC users expect. The maximum core speed of 60 MIPS at full industrial temperature range (and 70 MIPS in commercial) ensures ample headroom for state-machine plus control-loop workloads. Typical applications include automotive body and chassis ECUs, industrial sensor conditioning, factory automation controllers, motor-control peripheral boards, and consumer appliances requiring AEC-Q100 reliability. The integrated op amps and 12-bit ADC are especially valuable in designs where signal chains must stay simple to fit aggressive BOM targets. When laying out this part, allocate the exposed thermal pad (EP) directly under the UQFN-48 package to a continuous ground pour with multiple stitched vias. Decouple VDD with 0.1 uF and 10 uF ceramic capacitors placed within 2 mm of the supply pins, and keep the analog VDD trace isolated from switching nodes. This page synthesizes AEC-Q100 qualification context, drop-in same-footprint alternatives from the PIC24E family, and practical design notes that complement the manufacturer datasheet's reference designs.

견적 요청 문의하기
PIC24EP512GP204-E/PT - 16-bit 70 MIPS MCU, 512KB Flash | Microchip
PIC24EP512GP204-E/PT

PIC24EP512GP204-E/PT - 16-bit 70 MIPS MCU, 512KB Flash | Microchip

The Microchip PIC24EP512GP204-E/PT is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, delivering 70 MIPS throughput at 70 MHz core clock in a 44-pin TQFP (PT) package. It integrates 512 KB of Flash program memory and 48 KB of SRAM, while supporting interfaces including I2C, SPI, UART, IrDA, and USART. The MCU operates from a 3.0 V to 3.6 V supply and offers industrial-grade -40C to +125C operation (E suffix), making it suitable for harsh-environment embedded designs. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, internal Flash program memory, RAM, and a rich set of peripherals including timers, communication interfaces, and analog blocks. PIC24E MCUs sit in the hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> microcontroller -> embedded processor -> semiconductor. The PIC24E family uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, balancing deterministic interrupt response, code density, and DSP-class arithmetic on a single deterministic core. Key features include up to 70 MIPS performance, integrated operational amplifiers, analog comparators, a Charge Time Measurement Unit (CTMU), Peripheral Trigger Generator (PTG), and advanced PWM peripherals. The PIC24EP512GP204 also incorporates a 10/12-bit ADC with superior analog performance, multiple UART/SPI/I2C interfaces, and configurable I/O. The integrated op amps and CTMU eliminate external analog components for sensor conditioning, while PTG enables complex timing/sequencing without continuous CPU intervention. The PIC24EP512GP204 uses Microchip's enhanced PIC24E core with hardware multiply/divide and DSP engine support, providing deterministic interrupt latency and C-friendly architecture. Its 512 KB Flash supports large application code, while the 48 KB SRAM accommodates data buffers for communication stacks (TCP/IP, USB) and signal processing. High-speed PWM up to 1 ns resolution and CTMU enable precise timing-critical tasks such as capacitive touch sensing and motor control loop execution. Typical applications include industrial control systems, motor control (BLDC/PMSM), high-end sensor signal conditioning, LED lighting control, power-conversion digital control, and USB device/host interfaces. The combination of op amps, comparators, and CTMU is particularly well-suited for sensor fusion, automotive body modules, and intelligent battery management. When designing with this device, ensure that the core voltage supply is properly decoupled and that unused op amp/comparator inputs are tied to known voltage levels to minimize leakage. For EMI-sensitive applications, place the IC's analog and digital ground returns separately back to a star-ground point. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP512GP204-H/ML - 16-bit 60 MIPS 512KB Flash MCU | Microchip
PIC24EP512GP204-H/ML

PIC24EP512GP204-H/ML - 16-bit 60 MIPS 512KB Flash MCU | Microchip

The Microchip PIC24EP512GP204-H/ML is a 16-bit microcontroller from the PIC24EP family featuring a 60 MIPS dsPIC33/PIC24E core, 512 KB of Flash program memory (170K x 24), and a 44-pin QFN (ML) 8x8 mm package with an exposed thermal pad. It operates from 3.0V to 3.6V and supports the automotive -40C to +150C (H-grade) temperature range. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a 16-bit CPU core, program memory, data RAM, and a rich set of peripherals such as ADCs, timers, communication controllers, and GPIO. 16-bit MCUs occupy the middle ground between 8-bit controllers (PIC16, PIC18, 8051) and 32-bit microcontrollers (Cortex-M, PIC32). They are favored when 8-bit performance is insufficient but 32-bit cost and complexity are not required, particularly in motor control, digital power conversion, sensor processing, and real-time control. Key features include up to 512 KB self-programmable Flash, 48 KB RAM, configurable 10-bit 1.1 Msps / 12-bit 500 ksps ADC with up to 16 channels, three on-chip operational amplifiers with direct ADC connection, a Charge Time Measurement Unit (CTMU), a Peripheral Trigger Generator (PTG), high-speed PWM with up to 7.14 ns resolution, and communication peripherals including UART, SPI, I2C, and CAN. The 'H' suffix designates the -40C to +150C automotive junction temperature grade. The PIC24E core uses a Harvard architecture with separate program and data buses, a hardware multiplier, and 16 working registers, achieving 70 MIPS at 140 MHz CPU clock with deterministic interrupt latency. This makes the device suitable for closed-loop control loops running in the tens-of-kHz range, including field-oriented motor control and digital switch-mode power supply regulation. Typical applications include BLDC/PMSM motor drives, automotive sensor interfaces, solar inverters, LED lighting controllers, and industrial automation. The combination of op-amps, ADC, CTMU, and PTG allows direct signal conditioning and time measurement on-chip, eliminating external analog front-ends in many designs. When designing with this MCU, allocate sufficient PCB copper to the exposed thermal pad and follow Microchip's decoupling guidance: 0.1 uF and 10 uF near each VDD pin. The high 60 MIPS throughput at 3.3V requires careful analog/digital partitioning; refer to the family reference manual for the recommended ground-plane strategy. This page synthesizes verified distributor pricing, the -H/ML package pinout, drop-in alternatives from the PIC24EP family, and practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
PIC24EP512GP204-H/PT - 70 MIPS 16-bit MCU, 512KB Flash | Microchip
PIC24EP512GP204-H/PT

PIC24EP512GP204-H/PT - 70 MIPS 16-bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP204-H/PT is a 16-bit microcontroller from the PIC24EP family that pairs a 70 MIPS dsPIC33/PIC24E core with 512 KB Flash and 48 KB SRAM, housed in a 44-pin TQFP (10x10 mm) package. The '-H' temperature grade extends the operating range to 150C junction (high-temperature automotive/industrial grade), while the '/PT' suffix designates the 44-pin TQFP package. A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU, memory, and peripherals. The PIC24EP family belongs to the broader dsPIC33/PIC24E architecture lineage within Microchip's 16-bit MCU portfolio, which itself is a hypernym of microcontroller -> embedded processor -> semiconductor IC. The 16-bit data path and 70 MIPS throughput make this family well-suited for real-time control where 8-bit MCUs lack bandwidth but full DSP is unnecessary. Key differentiating features include a 12-bit ADC with up to 10 MSPS throughput, four on-chip operational amplifiers for analog front-end conditioning, three analog comparators, a Peripheral Trigger Generator (PTG) for hardware-state-machine timing, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing. The PTG offloads deterministic sequencing from the CPU, allowing background event chains to run without firmware intervention. Architecturally, the part uses a Harvard-style modified RISC core with a 16-bit wide data path, 24-bit instruction words, and a hardware multiply/divide engine. The 60 MHz operation (70 MIPS via 4-cycle MAC) consumes roughly 60 mA active and 40 uA in sleep, supporting both line-powered and battery-aware designs. Internal LDO and POR/BOR circuitry reduce external component count. Typical applications include industrial motor control, automotive sensor interfaces, high-performance digital power conversion, capacitive touch HMIs, and multi-loop closed-loop control. The internal op amps and comparators allow direct signal conditioning of shunt-current, thermocouple, and bridge-sensor inputs without external analog ICs. Designers should note the high junction temperature rating means PCB layout must keep theta_JA low - use a 4-layer board with a thermal land under the exposed pad and avoid placing the MCU near other heat sources. Also confirm the -H grade's supply voltage (3.0-3.6V) matches the rest of the analog chain. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24EP family, and design notes not found on individual datasheet sites - giving engineers a single source for selection, sourcing, and PCB-level integration guidance.

견적 요청 문의하기
PIC24EP512GP204-I/MV - 70 MIPS 16-bit MCU 512KB Flash | Microchip
PIC24EP512GP204-I/MV

PIC24EP512GP204-I/MV - 70 MIPS 16-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC24EP512GP204-I/MV is a 16-bit general-purpose microcontroller and digital signal controller from the PIC24E family, delivering 70 MIPS of CPU performance with 512 KB of Flash program memory and 48 KB of SRAM, housed in a 48-pin UQFN (MV) package. The high-speed modified Harvard architecture core operates up to 70 MIPS at 3.3V and supports complex DSP-style arithmetic with single-cycle MAC and divide operations. A 16-bit microcontroller is a single-chip computer that integrates a CPU core, program and data memory, and a peripheral set onto one silicon die. PIC microcontrollers belong to the broader hierarchy of embedded processors: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The PIC24E family specifically targets applications needing DSP-grade math throughput combined with deterministic interrupt response, making it well suited for digital power control, motor control, and advanced signal processing. Key features include a 12-bit ADC with up to 10 MSPS conversion rate, internal op-amps for analog signal conditioning, a Charge Time Measurement Unit (CTMU) for capacitive touch and current measurement, a Peripheral Trigger Generator (PTG) for hardware-state machine automation, and high-speed PWM with dedicated time bases. The device also offers multiple communication interfaces including UART, SPI, I2C, and USB/OTG on selected variants. The PIC24EP512GP204 architecture pairs the 70 MIPS core with a deterministic interrupt controller and a 17-bit x 17-bit multiplier capable of single-cycle MAC operations. This combination supports DSP kernels such as FIR/IIR filters and closed-loop control loops without CPU stall. The internal op-amps and CTMU reduce external analog BOM by providing programmable gain stages, comparators, and time-based capacitance measurement directly on-chip. Typical applications include digital power conversion (PFC, LLC, full-bridge converters), motor control (BLDC, PMSM, stepper), advanced LED lighting, industrial control automation, and audio/speech processing. The CTMU is widely used for capacitive touch human-machine interfaces and precision temperature sensing via time-based delta-sigma techniques. When designing with this MCU, place decoupling capacitors as close as possible to every VDD/VSS pair, keep the analog AVREF routing separate from digital switching currents, and follow Microchip's guidelines for the UQFN exposed pad - the central pad must be soldered to a continuous ground plane for thermal and electrical performance. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet alone.

견적 요청 문의하기