집적 회로

하위 카테고리

📁 ADC/DAC 2520 제품 📁 증폭기 IC 800 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 314 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1603 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18756 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32865)

PIC24EP32GP203-H/TL - 16-bit MCU, 32KB Flash, 70 MIPS | Microchip
PIC24EP32GP203-H/TL

PIC24EP32GP203-H/TL - 16-bit MCU, 32KB Flash, 70 MIPS | Microchip

The Microchip Technology PIC24EP32GP203-H/TL is a 16-bit microcontroller from the PIC24E general-purpose family, featuring a 70 MIPS high-performance core, 32 KB of Flash program memory, and 4 KB of RAM, housed in a 36-pin VTLA (Very Thin Leadless Array) package with an exposed thermal pad. It supports CPU speeds up to 60 MHz (FCY 70 MIPS) and integrates on-chip op amps, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG), making it well-suited for sensor conditioning and high-end general-purpose applications. A 16-bit microcontroller (MCU) is a programmable embedded processor that balances higher code density and richer arithmetic than 8-bit parts with much lower cost and power than 32-bit Cortex-M cores. The PIC24E family sits between Microchip's PIC18 (8-bit) and dsPIC33/PIC32 (32-bit) lines in the broader taxonomy of microcontrollers -> embedded processors -> semiconductors, and is widely used in motor control, power conversion, industrial sensing, and consumer audio products. Key features of the PIC24EP32GP203 include 32 KB self-programmable Flash with ECC, 4 KB SRAM, multiple UART/SPI/I2C peripherals, up to 16-channel 10/12-bit ADC, configurable op amps, and CTMU for capacitive touch and time-of-flight measurements. It also offers a Peripheral Trigger Generator (PTG) that coordinates peripheral operations without CPU intervention, offloading timing-critical tasks. The architecture combines a modified Harvard CPU with a 16-bit data path and DSP-like instructions, supported by hardware multiply and divide. The op amps and CTMU are tightly integrated with the ADC for direct sensor-interface signal chains. The wide 3.0–3.6 V operating range and integrated peripherals reduce external component count on cost-sensitive designs. Typical applications include industrial sensor conditioning, motor control (BLDC/PMSM FOC), LED lighting controllers, capacitive touch user interfaces, and battery-powered instrumentation. The PIC24E family's deterministic interrupt response and rich DSP instruction set suit digital power conversion and audio processing. When designing with this MCU, allocate PCB area for the VTLA land pattern and connect the exposed pad to ground for thermal dissipation and reference stability. Use MPLAB X IDE with the XC16 compiler for code development and the PICkit or ICD programmer for debug; verify the -H temperature grade if your design must operate across the full automotive range. This page combines distributor pricing, drop-in alternatives, and application guidance not found in the manufacturer datasheet alone, helping engineers accelerate PIC24EP32GP203-H/TL design-in decisions.

견적 요청 문의하기
PIC24EP32GP203-I/TL - 16-bit 70MIPS MCU 32KB Flash 36VTLA | Microchip
PIC24EP32GP203-I/TL

PIC24EP32GP203-I/TL - 16-bit 70MIPS MCU 32KB Flash 36VTLA | Microchip

The Microchip PIC24EP32GP203-I/TL is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring a 70 MIPS (60 MHz core) enhanced Harvard architecture with 32 KB of Flash program memory and 4 KB of RAM, all packaged in a compact 36-pin VTLA (5x5 mm) surface-mount format with industrial -40C to +85C temperature grade. An MCU, or microcontroller unit, is a single integrated circuit that combines a CPU core, program memory, data memory, and a range of peripheral interfaces on one die. The PIC24EP family occupies a specific niche in this hierarchy: 16-bit modified Harvard microcontrollers tuned for high-performance signal conditioning, motor control, and general-purpose embedded applications that exceed the capability of 8-bit PIC MCUs but do not require a full Cortex-M-class core. The PIC24E family hypernym chain runs: 16-bit MCU -> PIC24 -> PIC24EP -> general purpose family, within the broader semiconductor taxonomy of microcontroller -> embedded processor -> integrated circuit. Compared with 8-bit PIC16/PIC18 parts, the PIC24E doubles or quadruples instruction throughput and adds native DSP instructions. Key features include dual 16-channel 10-bit ADCs with 1.1 Msps sampling rate (12-bit equivalent ADC mode), two op-amps, two comparators, a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing, four 16-bit timers, four DMA channels, and a CTMU (Charge Time Measurement Unit) for capacitive touch and current measurement. Communication interfaces include UART, SPI, I2C, and ECAN, providing flexible connectivity for sensor, display, and industrial control networks. The PIC24E core architecture is a 16-bit modified Harvard CPU with a 24-bit instruction word, supporting single-cycle multiply, hardware divide, and zero-overhead looping. With 70 MIPS execution, the core can perform complex DSP filter algorithms, PID motor-control loops, and protocol stacks without offloading to external coprocessors. The 36-VTLA package also integrates a low-power sleep mode down to 25 nA typical, well-suited for battery-aware IoT edge nodes. Typical applications include industrial sensor conditioning, BLDC/PMSM motor control (with field-oriented control algorithms), capacitive-touch human-machine interfaces, UPS and solar inverter control, LED lighting drivers with PFC, and portable medical instrumentation. The wide ADC bandwidth also suits audio front ends and power-metering ICs. Design consideration: when migrating from PIC24F to PIC24EP, ensure the application uses a 3.0V-3.6V VDD supply because PIC24EP devices do not support 5V operation. Use the Peripheral Trigger Generator (PTG) to offload tightly timed ADC-DMA sequences from the CPU and to minimize interrupt latency in deterministic control loops. This page synthesizes distributor pricing, drop-in alternative listings, and practical design notes not found in the manufacturer datasheet, providing additional selection context beyond the Microchip DS70000657 datasheet family.

견적 요청 문의하기
PIC24EP32GP203T-I/TL - 70 MIPS 32KB Flash 16-bit MCU | Microchip
PIC24EP32GP203T-I/TL

PIC24EP32GP203T-I/TL - 70 MIPS 32KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24EP32GP203T-I/TL is a 16-bit microcontroller from the PIC24E general-purpose family, integrating a high-performance 70 MIPS core with 32 KB of Flash program memory and 4 KB of RAM in a compact 36-pin VTLA (5x5 mm) surface-mount package. It executes up to 70 million instructions per second, providing ample headroom for sensor fusion, motor-control loops, and high-speed digital signal processing in embedded systems. What is a 16-bit MCU? A 16-bit microcontroller is an embedded computing device with a 16-bit data path, instruction word, and register file, sitting hierarchically between 8-bit MCUs (lower cost, simpler) and 32-bit MCUs (higher performance, more memory). PIC24E devices fill the high-performance 16-bit niche, offering DSP-class instructions, hardware multipliers, and code density advantages over 32-bit Cortex-M0+ parts at similar clock rates. Key features of the PIC24EP32GP203T-I/TL include a 10-bit ADC with up to 500 ksps conversion rate, multiple communication peripherals (UART, SPI, I2C), enhanced PWM/Capture/Compare timers, and Microchip's Peripheral Trigger Generator (PTG) for sequencing hardware events without CPU intervention. The device operates from 3.0 V to 3.6 V, supports an industrial temperature range of -40C to +85C, and includes CTMU (Charge Time Measurement Unit) for capacitive touch and precise time-based measurements. Architecturally, the PIC24E core uses a modified Harvard architecture with separate program and data buses, a 24-bit instruction word, and a 16-bit data path. The wide instruction bus improves code density by allowing many operations to be encoded in a single word, while the Peripheral Trigger Generator and hardware DMA channels offload repetitive I/O tasks from the CPU, enabling deterministic real-time response. Typical applications include industrial sensor nodes, low-cost motor control (BLDC/PMSM FOC entry points), building automation, medical point-of-care instrumentation, USB device peripherals, and general-purpose embedded control in space-constrained designs. The wide peripheral set and CTMU simplify touch-button or flow-meter front-ends without additional analog ICs. When designing with this part, pay attention to the VTLA-36 land pattern - it requires microvia-compatible PCB fabrication and a thermal pad for proper power dissipation. For firmware development, Microchip's MPLAB X IDE with the XC16 compiler and the free dsPIC33/PIC24E Peripheral Library provide a complete toolchain, with hardware debug via MPLAB ICD 4 or PICkit 4. This page synthesizes distributor pricing, verified drop-in alternatives from the PIC24E family, and practical PCB-layout notes not duplicated in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP32GP204-E/ML - 16-bit 70 MIPS 32KB Flash MCU | Microchip
PIC24EP32GP204-E/ML

PIC24EP32GP204-E/ML - 16-bit 70 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32GP204-E/ML is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring a 60 MIPS (70 MIPS peak) CPU core with 32KB (10.7K x 24) of Flash program memory in a 44-pin VQFN (8x8) package with exposed thermal pad. The device is AEC-Q100 qualified for automotive applications and operates across an extended -40C to +125C temperature range. A PIC24EP microcontroller belongs to the 16-bit MCU family (microcontroller unit) within the broader taxonomy of microcontrollers -> embedded processors -> semiconductor ICs. The PIC24EP series uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, optimized for high-performance digital signal control and general-purpose embedded applications. Within Microchip's dsPIC/PIC24 product hierarchy, the 'GP' suffix denotes General Purpose variants without integrated DSP, while the 'EP' prefix indicates the Enhanced Peripheral family with the high-speed 70 MIPS core. Key features of the PIC24EP32GP204-E/ML include 32KB Flash program memory, 4KB SRAM, hardware op-amps, a Charge Time Measurement Unit (CTMU), a Peripheral Trigger Generator (PTG), and superior ADC performance. The device supports up to 70 MIPS operation from a 3.0V to 3.6V supply, providing ample headroom for motor control, digital power conversion, and sensor processing. The integrated op-amps eliminate external analog conditioning circuitry, reducing BOM cost and PCB area. The 'E' suffix designates the extended-temperature automotive grade (-40C to +125C) with AEC-Q100 qualification, while 'ML' indicates the 44-pin QFN package. The exposed thermal pad on the VQFN package enables efficient heat dissipation for high-performance applications. The PIC24EP architecture provides deterministic interrupt response, making it suitable for real-time control systems where timing predictability is critical. Typical applications include automotive body electronics, industrial motor control, digital power conversion, sensor signal conditioning, LED lighting control, and medical instrumentation. The integrated op-amps and CTMU make it particularly well-suited for capacitive touch sensing and precision analog measurement applications. When designing with this device, ensure adequate decoupling on VDD/AVDD pins (typically 100nF ceramic per pin pair) and proper ground plane design for the exposed thermal pad. The PTG peripheral enables complex timing sequences without CPU intervention, reducing code complexity for advanced control loops. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a complete engineering resource for the PIC24EP32GP204-E/ML.

견적 요청 문의하기
PIC24EP32GP204-E/MV - 60 MIPS 32KB Flash 16-bit MCU | Microchip
PIC24EP32GP204-E/MV

PIC24EP32GP204-E/MV - 60 MIPS 32KB Flash 16-bit MCU | Microchip

The Microchip PIC24EP32GP204-E/MV is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 60 MIPS performance from a 32KB (10.7K x 24) program Flash memory in a 48-pin UQFN (6x6 mm) exposed-pad package. It features 4KB RAM, operates from 3.0V to 3.6V, and supports industrial-grade temperatures of -40C to +125C. The -E/MV suffix denotes the UQFN-48 package with extended-temperature qualification. A 16-bit microcontroller (MCU) is a programmable processor with a 16-bit data path, register file, and ALU, sitting hierarchically above 8-bit MCUs and below 32-bit ARM Cortex-M devices in the embedded processing taxonomy: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24EP family targets high-performance general-purpose applications where 8-bit cores lack throughput but full 32-bit MCUs are over-spec. The 'E' suffix indicates enhanced analog features including operational amplifiers, comparators, CTMU (Charge Time Measurement Unit), and a Peripheral Trigger Generator (PTG) for hardware-state-machine automation. Key features include a 70 MIPS capable core (60 MIPS at this device's speed grade), 32KB self-programmable Flash with ECC, 4KB SRAM, multiple 16-bit timers, a 10/12-bit ADC, two op-amps, two comparators, USB-friendly peripherals, and multiple UART/SPI/I2C interfaces. Communication interfaces include up to two UARTs, two SPI, and two I2C ports, plus a Parallel Master Port on selected variants. Architecturally, the PIC24EP uses a modified Harvard architecture with separate program and data paths, a hardware multiplier/Divide engine, and DSP extensions that allow single-cycle MAC operations. The PTG peripheral allows complex timing sequences to run without CPU intervention, freeing the core for application-level processing. The 48-pin UQFN with exposed pad provides thermal dissipation appropriate to the core's 60 MIPS throughput. Typical applications include industrial motor control, automotive body electronics (AEC-Q100 grade on the standard PIC24EP32GP204-I/MV is required for automotive deployment - this -E variant is extended-temperature industrial), sensor signal conditioning using the on-chip op-amps, and USB device/host peripherals. The on-chip CTMU simplifies capacitive touch and time-of-flight measurements. When designing with this part, ensure the exposed pad is soldered to a sufficiently large copper pour to meet thermal and electrical ground requirements. The device operates from a single 3.3V supply, and the configuration bits must be set correctly for oscillator selection and watchdog behavior. This page synthesizes distributor pricing, AEC-Q100 compliance notes, drop-in alternatives in the same UQFN-48 footprint, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP32GP204-E/TL - 16-bit 60 MIPS 32KB Flash MCU | Microchip
PIC24EP32GP204-E/TL

PIC24EP32GP204-E/TL - 16-bit 60 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32GP204-E/TL is a 16-bit microcontroller from the PIC24EP "GP" general-purpose family, integrating a 60 MIPS dsPIC33/PIC24E core with 32 KB of Flash program memory, 4 KB of RAM, and a Peripheral Trigger Generator (PTG) in a 44-pin VTLA (6x6 mm) surface-mount package. It operates from a 3.0 V to 3.6 V supply and supports industrial temperature grades in the -E variant, with the high-speed core delivering up to 70 MIPS for time-critical control loops. A 16-bit microcontroller (MCU) is a programmable processor that balances deterministic real-time control with richer peripherals than 8-bit MCUs while consuming less power than 32-bit Cortex-M parts; PIC24EP sits in the Microchip taxonomy as: PIC24EP -> PIC24 family -> dsPIC33/PIC24E core -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. The PIC24EP32GP204 is positioned for general-purpose embedded control, integrating the CPU, memory, ADCs, comparators, and communication peripherals on a single die to reduce BOM cost and PCB area in motor control, lighting, and industrial-sensing products. Key features of the PIC24EP32GP204-E/TL include an internal 60 MIPS 16-bit CPU, 32 KB Flash (10.7K x 24 words), 4 KB SRAM, an integrated Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, dual operational amplifiers on-chip for analog front-end conditioning, and a Peripheral Trigger Generator (PTG) for sequencing complex ADC/PWM sequences without CPU intervention. It also provides multiple 16-bit timers, UART, SPI, I2C, and high-speed PWM channels suitable for digital power conversion. The PIC24EP32GP204-E/TL architecture pairs a Harvard-class 16-bit CPU with DSP extensions, allowing single-cycle MAC operations, fractional arithmetic, and a wide range of addressing modes. The CTMU and on-chip op amps enable direct interface with photodiodes, thermistors, and current-sense resistors without external analog circuitry, while the PTG offloads timing-critical peripheral handshakes from the core, freeing CPU bandwidth for application logic. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital LED lighting drivers with DMX or DALI interfaces, HVAC fan and pump control, photovoltaic inverter supervisory MCUs, capacitive-touch human-machine interfaces (HMIs), and general-purpose sensor-hub designs. Its 32 KB Flash also suits small protocol-stack implementations for UART/SPI-connected IoT edge nodes. When designing with this part, ensure the VTLA-44 (6x6) land pattern includes adequate thermal copper for the exposed pad; the small package concentrates heat when running the core near 70 MIPS at 3.3 V. Place a 0.1 uF + bulk 4.7 uF decoupling pair within 5 mm of VDD/VSS and keep the AVDD analog supply isolated from switching I/O for best ADC SNR. For new designs with no fixed board constraints, prefer the QFN-44 (8x8) PIC24EP32GP204-E/ML variant for easier hand-assembly and thermal dissipation. This page synthesizes distributor pricing, same-package drop-in alternatives within the PIC24EP family, and practical design notes not consolidated in the Microchip datasheet, giving procurement and design engineers a single reference for the PIC24EP32GP204-E/TL.

견적 요청 문의하기
PIC24EP32GP204-H/PT - 70 MIPS 16-Bit MCU, 32KB Flash | TQFP-44
PIC24EP32GP204-H/PT

PIC24EP32GP204-H/PT - 70 MIPS 16-Bit MCU, 32KB Flash | TQFP-44

The Microchip Technology PIC24EP32GP204-H/PT is a 16-bit general-purpose microcontroller from the PIC24EP "GP" family, delivering 70 MIPS core performance with 32 KB of Flash program memory and housed in a 44-pin TQFP package (PT suffix). The "-H" suffix indicates the high-temperature operating range of -40C to +150C, while the GP variant integrates rich analog peripherals including a 10-bit ADC, op amps, CTMU, and the Peripheral Trigger Generator (PTG) for high-end general-purpose applications. The device is well suited for automotive under-hood, industrial motor control, and harsh-environment sensor nodes where extended thermal headroom is mandatory. A PIC microcontroller (Programmable Interrupt Controller) is a compact single-chip computer integrating a CPU core, non-volatile Flash program memory, SRAM data memory, and a wide range of mixed-signal peripherals. The PIC24EP family belongs to the 16-bit dsPIC/PIC24E architecture which provides a modified Harvard CPU running up to 70 MIPS, hardware multiply/divide, and DSP-class instructions - a hierarchy that places it above 8-bit PIC16/PIC18 MCUs and below 32-bit PIC32MX/PIC32MM parts in Microchip's product tree. This class of MCU is widely used as the real-time control brain in cost-sensitive embedded systems. Key features of the PIC24EP32GP204-H/PT include a 70 MIPS core with single-cycle MAC, 32 KB self-programmable Flash with ECC, 4 KB SRAM, 4 op amps, 3 comparators, a 10-bit 1.1 Msps ADC with up to 9 channels, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, and the Peripheral Trigger Generator (PTG) which orchestrates peripheral timing without CPU intervention. Communication interfaces include I2C, SPI, UART, and USB-OTG (device/host on select variants). The device uses a 3.0 V to 3.6 V single supply, has a typical run current of approximately 8 mA at full speed and deep sleep currents in the microampere range - making it attractive for battery-backed instrumentation. The integrated op amps and CTMU remove the need for several external analog components, simplifying PCB design for sensor signal conditioning. The PTG can sequence ADC conversions and PWM updates autonomously, offloading the CPU and enabling deterministic control loops in motor and power-conversion applications. Typical applications include automotive sensor interfaces (under-hood, transmission, body controllers), industrial PLCs and motor drives, LED lighting controllers, smart energy metering, and consumer appliances. The 70 MIPS performance combined with high-temperature tolerance makes the -H variant particularly suited for automotive and industrial deployments where thermal margin is critical. When designing with this part, ensure your linker script accounts for the 32 KB Flash boundary, configure the FRC with PLL for the 70 MIPS operation, and use the CTMU calibration procedure documented in the family reference manual for accurate capacitive measurements. For USB applications, verify your board meets the USB 2.0 impedance specification on the D+/D- lines. This page consolidates real distributor pricing, parametric drop-in alternatives, and practical design guidance beyond what is found in the manufacturer datasheet alone, helping engineers quickly evaluate whether the PIC24EP32GP204-H/PT is the right fit for their high-temperature 16-bit MCU application.

견적 요청 문의하기
PIC24EP32GP204-H/TL - 32KB Flash 16-bit MCU 44-Pin | Microchip
PIC24EP32GP204-H/TL

PIC24EP32GP204-H/TL - 32KB Flash 16-bit MCU 44-Pin | Microchip

The Microchip PIC24EP32GP204-H/TL is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, featuring 32 KB of Flash program memory, 4 KB of RAM, and a 60 MHz (70 MIPS) operating speed in a 44-pin VTLA exposed-pad package. This -H (high-temperature, -40C to +150C operating range) variant is qualified to AEC-Q100 for automotive applications, making it suited for under-hood and harsh-environment embedded systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and programmable I/O peripherals. The PIC24EP family belongs to Microchip's 16-bit dsPIC/PIC24E architecture hierarchy: microcontroller -> 16-bit MCU -> PIC24E family -> PIC24EP sub-family -> general purpose tier. This taxonomy places the PIC24EP between the older PIC24F and the higher-end dsPIC33E families in both performance and on-chip analog integration. Key differentiating features include enhanced ADC performance with up to 12-bit resolution and 1.1 Msps conversion rate, on-chip op-amps, Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement, Peripheral Trigger Generator (PTG) for hardware event sequencing, and high-speed PWM with independent time bases. These blocks are uncommon in competing 16-bit MCUs at this price/performance tier and reduce external component count for motor control and power conversion designs. The PIC24E core uses a 16-bit modified Harvard architecture with a 24-bit instruction word, allowing most instructions to execute in a single cycle and supporting DSP-oriented operations. The 70 MIPS performance, combined with 32 KB self-programmable Flash and 4 KB SRAM, supports real-time control loops up to several kHz while leaving headroom for communication stacks (UART, SPI, I2C) and user interfaces. Typical applications include automotive body electronics and sensor conditioning, BLDC/PMSM motor control (fans, pumps, small appliances), digital power supplies, LED lighting controllers, industrial sensor hubs, and consumer appliances requiring extended-temperature operation. The integrated op-amps and CTMU allow direct interfacing with current-shunt resistors and capacitive sensors without external analog ICs. When designing with this device, allocate decoupling per Microchip's recommended layout: 100 nF ceramic on each VDD/AVDD pair within 5 mm of the pin, plus a bulk 10 uF near the supply entry. The exposed thermal pad (EP) must be soldered to a continuous ground plane for both thermal dissipation and electrical reference per the package guidelines.

견적 요청 문의하기
PIC24EP32GP204-I/ML - 16-Bit 70 MIPS MCU, 32KB Flash, 44-QFN | Microchip
PIC24EP32GP204-I/ML

PIC24EP32GP204-I/ML - 16-Bit 70 MIPS MCU, 32KB Flash, 44-QFN | Microchip

The Microchip Technology PIC24EP32GP204-I/ML is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, featuring a 70 MIPS high-performance core with 32KB (10.7K x 24) of Flash program memory and 4KB of SRAM, housed in a 44-pin QFN (8x8 mm) package. It supports 3.0V to 3.6V single-supply operation, runs at up to 70 MIPS, and is engineered for high-end general-purpose embedded applications requiring strong analog and digital mixed-signal performance. A 16-bit microcontroller (MCU) is a programmable computing device that uses a 16-bit-wide data path and instruction set, occupying the middle ground between 8-bit MCUs (PIC16, PIC18, AVR) and 32-bit MCUs (ARM Cortex-M). The PIC24EP family sits at the high-performance end of Microchip's dsPIC/PIC24 line, offering DSP-like computational density with the simplicity of a classic MCU programming model. In the broader taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor, the PIC24EP32GP204 targets cost-sensitive applications that need more computational headroom than an 8-bit part but do not justify the cost or complexity of a 32-bit ARM Cortex-M device. Key differentiating features include superior ADC performance (10-bit/12-bit options with dedicated S&H), on-chip Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, dual operational amplifiers, and a Peripheral Trigger Generator (PTG) for sequencing peripheral events without CPU intervention. The device integrates advanced motor-control and power-conversion PWM peripherals, multiple UART/SPI/I2C interfaces, and configurable I/O, making it a single-chip solution for sensor conditioning and closed-loop control. Typical applications include industrial automation (PLC I/O modules, sensor signal conditioning), motor control (BLDC/PMSM FOC drivers, low-power inverter control), power conversion (digital PFC, solar micro-inverters, smart power supplies), and consumer devices requiring accurate analog front-ends (e.g., smart thermostats, e-metering). The CTMU peripheral makes it especially well-suited for capacitive touch user interfaces and ultrasonic distance measurement. When designing with the PIC24EP32GP204, plan the analog reference decoupling carefully and ensure unused op-amp outputs are tied to a defined voltage level to avoid parasitic oscillations. Use MPLAB X IDE with the XC16 compiler for code development; the Peripheral Trigger Generator is highly flexible but requires careful configuration to avoid race conditions in peripheral event chains. This page synthesizes distributor pricing, drop-in alternatives within the PIC24EP family, and practical design notes not collected in a single section of the manufacturer datasheet - giving engineers a faster path from requirement to prototype.

견적 요청 문의하기
PIC24EP32GP204-I/MV - 70 MIPS 16-bit MCU, 32KB Flash | Microchip
PIC24EP32GP204-I/MV

PIC24EP32GP204-I/MV - 70 MIPS 16-bit MCU, 32KB Flash | Microchip

The Microchip Technology PIC24EP32GP204-I/MV is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring a high-performance 70 MIPS core with 32KB of Flash program memory and 4KB of RAM, housed in a 48-pin UQFN (6x6 mm) package with an exposed thermal pad. It is qualified for the industrial temperature range (-40C to +85C) and operates from a 3.0V to 3.6V single supply, delivering 70 MIPS of CPU throughput with deterministic interrupt latency suitable for real-time control. A 16-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), volatile working memory (RAM), and a rich set of peripherals such as analog-to-digital converters, timers, communication interfaces, and increasingly on-chip analog functions. PIC24EP devices sit in the 16-bit MCU -> dsPIC DSC -> microcontroller -> embedded processor hierarchy, bridging 8-bit PIC MCUs and 32-bit ARM Cortex-M parts. Compared with simple 8-bit controllers, 16-bit MCUs offer wider data paths, larger linear address spaces, DSP-friendly multiply/accumulate instructions, and substantially more code density for C compilers. Key features include 32KB (10.7K x 24) self-programmable Flash with ECC, 4KB SRAM, integrated operational amplifiers, analog comparators, a Charge Time Measurement Unit (CTMU), a Peripheral Trigger Generator (PTG) for flexible hardware sequencing, and a 10/12-bit ADC with up to 9 input channels. The device also integrates multiple PWM/SCCP/MCCP timers, UART, SPI, I2C, and USB/OTG-capable peripherals depending on the variant within the family, plus a high-speed 16-channel peripheral interconnect fabric. The architecture is a modified Harvard design with separate program and data buses, a 24-bit instruction word, a 16-bit data path, and a hardware multiply/divide unit. The 70 MIPS core executes most instructions in 1-2 cycles, providing predictable execution timing for closed-loop control. The on-chip op amps and CTMU enable direct interface to sensors such as thermistors, photodiodes, and capacitive touch elements without external signal conditioning. Typical applications include industrial sensor conditioning, motor control (BLDC, PMSM, stepper), digital power conversion, LED lighting control, building automation, USB peripherals, medical instrumentation, and general-purpose embedded control. The integrated op amps and CTMU reduce BOM cost in sensor-interface designs, while the PTG allows complex waveform generation without continuous CPU intervention, freeing MIPS for higher-level control loops. When designing with this device, allocate careful attention to the 3.0V-3.6V supply range, since PIC24EP is not a 5V-tolerant MCU. Place decoupling capacitors close to all VDDCORE and VDDIO pins, and follow the recommended UQFN-48 land pattern with adequate thermal via stitching under the exposed pad to keep junction temperature within the -40C to +85C industrial range. This page synthesizes distributor pricing for PIC24EP32GP204-I/MV, drop-in same-package alternatives from the PIC24EP and dsPIC33EP families, and practical design notes not consolidated in the manufacturer datasheet, giving engineers a single decision-grade reference.

견적 요청 문의하기
PIC24EP32GP204-I/PT - 16-bit 70 MIPS MCU, 32KB Flash, TQFP-44 | Microchip
PIC24EP32GP204-I/PT

PIC24EP32GP204-I/PT - 16-bit 70 MIPS MCU, 32KB Flash, TQFP-44 | Microchip

The Microchip PIC24EP32GP204-I/PT is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 70 MIPS throughput from a 70 MHz CPU core and integrating 32 KB of Flash program memory, 4 KB of RAM, and a high-performance 10/12-bit ADC. The device is housed in a 44-pin TQFP (PT) package with 10x10 mm body size, rated for the industrial -40C to +85C temperature range. An MCU (microcontroller) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. 16-bit microcontrollers such as the PIC24EP series occupy the middle of the performance hierarchy between 8-bit MCUs (e.g. PIC16, PIC18) and 32-bit parts (e.g. PIC32, ARM Cortex-M). The PIC24EP family uses an enhanced Harvard architecture with separate program and data paths, making it well suited for mixed-signal control loops, motor control, and DSP-style signal processing where deterministic timing matters. Key features include a Peripheral Trigger Generator (PTG) for sequencing peripherals without CPU intervention, on-chip operational amplifiers for analog signal conditioning, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, four 16-bit timers, multiple UART/SPI/I2C interfaces, and a 10/12-bit ADC with up to 500 ksps conversion rate. The integrated DSP engine accelerates FIR/IIR filters and FFT computations, allowing real-time signal analysis without an external DSP. The 70 MIPS core, combined with the DSP extensions, lets the PIC24EP32GP204 execute complex control algorithms while still servicing high-speed peripherals. The on-chip op amps reduce BOM cost in motor-control and power-conversion designs, and the CTMU simplifies touch-sensing front ends. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC, full-bridge converters), sensor signal conditioning with on-chip op amps, capacitive touch HMI panels, and high-performance general-purpose embedded control. The 32 KB Flash makes it best for code footprints up to roughly 20 KB after driver overhead. When designing with this device, ensure the decoupling network is sized for the 70 MHz core and the ADC reference pin is well buffered. The PTG feature is highly valuable for synchronizing ADC sampling with PWM edges in motor-control loops. This page synthesizes drop-in alternatives, design notes, and lifecycle observations not found in the manufacturer datasheet, helping procurement and engineering teams evaluate the PIC24EP32GP204-I/PT alongside its pin-compatible family members.

견적 요청 문의하기
PIC24EP32GP204-I/TL - 16-bit MCU 32KB Flash 44-VFTLA | Microchip
PIC24EP32GP204-I/TL

PIC24EP32GP204-I/TL - 16-bit MCU 32KB Flash 44-VFTLA | Microchip

The Microchip Technology PIC24EP32GP204-I/TL is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, delivering 70 MIPS core performance from a single 3.3 V supply and packaged in a 44-pin VFTLA (VTLA) exposed-pad land-grid-array format. The device integrates 32 KB of Flash program memory (10.7K × 24 organization), 4 KB of SRAM, and a rich set of analog peripherals including operational amplifiers, comparators, a 10-bit ADC, and the Charge Time Measurement Unit (CTMU). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a configurable set of digital and analog peripherals. Within the broader taxonomy, a 16-bit MCU sits between 8-bit controllers (lower computational headroom, simpler peripherals) and 32-bit MCUs (higher performance, larger address space). The PIC24EP family targets the high-end general-purpose tier, offering DSP-class instruction throughput, hardware op-amps, and the Peripheral Trigger Generator (PTG) for hardware-state-machine-driven peripherals, while remaining compatible with the classic PIC16/24 instruction set for code portability. Key features include a CPU speed of up to 70 MIPS at 70 MHz, hardware Multiply and Divide in a single cycle, Peripheral Pin Select (PPS) for flexible signal routing, an integrated Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight sensing, on-chip op-amps and comparators for analog signal conditioning, and an advanced 8-channel PWM with dead-band control. Communication peripherals include I2C, SPI, UART, and Enhanced Parallel Slave Port (EPSP). Architecturally, the PIC24EP32GP204-I/TL uses a modified Harvard architecture with separate 24-bit instruction and 16-bit data paths, single-cycle hardware multiplier, and a 16-element register file. The CTMU, paired with the ADC, allows precision time measurement with sub-nanosecond resolution, enabling capacitive touch sensing, accurate temperature conversion, and ultrasonic time-of-flight measurements without external timing ASICs. Typical applications include industrial control and automation, digital signal processing at the edge, LED lighting controllers, motor control with PFC, medical monitoring instrumentation, and consumer appliance UI panels with capacitive touch. The combination of 70 MIPS, hardware op-amps, and CTMU makes the device especially suited to power-conversion control loops and DSP-style sensor processing. When designing with this device, ensure the VFTLA exposed pad is soldered to a sufficiently large thermal/ground pour; failure to do so can cause thermal runaway under high I/O toggle loads. Decouple VDDCORE with a 10 µF bulk + 0.1 µF ceramic pair within 5 mm of the exposed pad, and keep analog reference traces isolated from switching digital lines. This page synthesizes distributor pricing, drop-in alternatives across Microchip PIC24EP/dsPIC variants, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP32GP204T-I/ML - 16-bit 70 MIPS MCU, 32KB Flash | Microchip
PIC24EP32GP204T-I/ML

PIC24EP32GP204T-I/ML - 16-bit 70 MIPS MCU, 32KB Flash | Microchip

The Microchip PIC24EP32GP204T-I/ML is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 70 MIPS core performance, 32 KB (10.7K x 24) of Flash program memory and 4 KB RAM in a 44-pin QFN (8x8) package. It runs from a 3.0 V to 3.6 V supply, offers 35 digital I/O pins, and integrates an ADC with both 10-bit and 12-bit modes, op-amps, comparators, CTMU and a Peripheral Trigger Generator (PTG). A 16-bit PIC microcontroller (MCU) is a member of the microcontroller family built on a 16-bit modified Harvard architecture with separate program and data buses. PIC24E devices sit in the broader taxonomy: 16-bit MCU -> PIC24 family -> PIC24E sub-family -> PIC24EP "GP" general-purpose series. The 70 MIPS core executes most instructions in one cycle, while the 16-bit data path, large register file and DSP-class instructions deliver significantly more throughput per MHz than 8-bit alternatives. Key features of this variant include a 70 MIPS (60 MHz) CPU with DSP instructions, 32 KB self-programmable Flash, 4 KB SRAM, two op-amps usable for signal conditioning before the ADC, up to 35 I/O, multiple serial interfaces (UART, SPI, I2C) and a 12-bit ADC with 9 channels minimum. The 44-QFN (8x8 mm) package includes an exposed pad (EP) for thermal dissipation, and the device is qualified for the -40C to +85C industrial temperature range. Architecturally, the PIC24EP "GP" series combines a deterministic single-cycle engine with rich analog integration: two operational amplifiers can be paired with the ADC for sensor-interface front-ends, while the CTMU provides time-based touch and current measurement. The PTG can sequence peripheral events autonomously, offloading timing-critical tasks from the CPU. Compared with PIC24F devices, the EP core adds DSP instructions and a much faster instruction rate. Typical applications include industrial sensor conditioning, motor-control signal chains, LED lighting controllers, USB-to-UART bridges using the on-chip UART, and general-purpose embedded control in consumer or industrial products. The combination of integrated op-amps, PTG and 70 MIPS throughput also makes the part well-suited to closed-loop control tasks such as BLDC commutation and PID loops. When designing with this part, take care to observe the 3.0 V to 3.6 V supply window - this is NOT a 5 V tolerant MCU. Decouple VDD/AVDD with 100 nF and 10 uF ceramics placed close to the pins, bond the exposed pad to a continuous ground plane for thermal relief, and configure unused I/O as outputs to minimise current draw. The "T" suffix denotes tape-and-reel packaging; the "I" in the operating range indicates the industrial -40C to +85C grade. This page consolidates distributor pricing, pin-compatible drop-in alternatives in the same 44-QFN (8x8) footprint, and practical design notes that go beyond the manufacturer datasheet summary.

견적 요청 문의하기
PIC24EP32GP204T-I/MV - 70 MIPS 16-Bit MCU, 32KB Flash | Microchip
PIC24EP32GP204T-I/MV

PIC24EP32GP204T-I/MV - 70 MIPS 16-Bit MCU, 32KB Flash | Microchip

The Microchip Technology PIC24EP32GP204T-I/MV is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering 70 MIPS of CPU performance with 32 KB of Flash program memory (10.7K x 24 words) and 4 KB of SRAM, housed in a 48-pin UQFN (6x6 mm) package with exposed thermal pad. The integrated peripherals include operational amplifiers, comparators, CTMU (Charge Time Measurement Unit), a Peripheral Trigger Generator (PTG), and high-speed PWM, all designed for advanced analog and motor-control applications. A 16-bit microcontroller (MCU) is an integrated circuit containing a CPU core, program memory, data memory, and a rich set of on-chip peripherals aimed at embedded control tasks. The PIC24E family sits in the hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> Microchip MCU portfolio -> embedded processor. The PIC24EP 'GP' (General Purpose) sub-line emphasizes high analog performance and flexible peripherals rather than motor-control DSP features. Key features include a 70 MIPS (60 MHz) modified Harvard core with DSP-like instructions, two on-chip op-amps usable as front-end gain stages for the ADC, multiple comparators with selectable references, and the Peripheral Trigger Generator that sequences ADC, PWM, and I/O events without CPU intervention. The device operates from 3.0 V to 3.6 V and provides up to 35 I/O pins with PPS (Peripheral Pin Select) flexibility. The architecture uses a 16-bit modified Harvard bus with hardware multiply/divide, zero-overhead looping, and deterministic interrupt latency, enabling high-throughput signal processing. Internal oscillators and PLLs reduce external component count, while the integrated CTMU supports capacitive touch and time-of-flight measurements with sub-microsecond resolution. Typical applications include industrial sensor conditioning, closed-loop motor control (PMSM, BLDC), portable medical instrumentation, LED lighting controllers, and consumer appliances where analog front-end integration simplifies the BOM. When designing with this MCU, observe the 3.0-3.6 V supply window, place decoupling capacitors within 5 mm of each VDD/VSS pair, and use the UQFN exposed pad as the primary thermal and electrical return. Program via ICSP using PGECx/PGEDx pins; the 'T' suffix denotes tape-and-reel packaging. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP32MC202-E/MM - 60 MIPS 16-Bit Motor Control MCU | Microchip
PIC24EP32MC202-E/MM

PIC24EP32MC202-E/MM - 60 MIPS 16-Bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC202-E/MM is a 16-bit microcontroller from the PIC® 24EP family, designed for high-performance precision motor control. It delivers 60 MIPS at 70 MHz CPU clock, integrates 32 KB (10.7K x 24) of Flash program memory, 4 KB of RAM, and is housed in a 28-pin QFN-S (6x6 mm) package with an exposed thermal pad. The device is AEC-Q100 qualified for automotive applications and supports an operating voltage range of 3.0V to 3.6V with an extended temperature grade of -40°C to +125°C. A 16-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program memory (Flash), data memory (RAM), peripherals, and I/O on one silicon die. Within the broader semiconductor taxonomy it sits below 32-bit MCUs and above 8-bit MCUs in processing capability, while still offering lower power and deterministic interrupt latency than most 32-bit Cortex-M devices. The 16-bit PIC24E architecture uses a modified Harvard design with a 24-bit instruction word and 16-bit data path, enabling DSP-class operations and high-throughput motor-control math in a single cycle. Key differentiating features of the PIC24EP32MC202-E/MM include up to six 10/12-bit ADC channels, three op-amps, three analog comparators, a Peripheral Trigger Generator (PTG), and dedicated Motor Control PWM (MCPWM) outputs. The integrated op-amps and comparators remove the need for external analog signal conditioning in current-sense and back-EMF sensing topologies. The 60 MIPS performance envelope, combined with the 16-bit DSP engine, lets the device execute field-oriented control (FOC) loops in real time for BLDC and PMSM motors. Typical target applications are automotive and industrial motor drives, including HVAC blowers, electric water pumps, fuel pumps, BLDC fans, e-bike controllers, and small servo drives. The 28-QFN package is footprint-compatible with the rest of the PIC24EP32MC2xx family, allowing a single PCB to support multiple motor power tiers by swapping only the MCU. When designing with this part, place the exposed pad (EP) on the QFN package over a continuous copper pour with at least 6 thermal vias to the inner ground plane to meet the -40°C to +125°C extended-grade thermal envelope. Decouple VDD with a 100 nF X7R ceramic capacitor placed within 3 mm of the pin, and follow the datasheet guidance for the analog VDD/VSS pair (AVDD/AVSS) when using the on-chip ADCs and op-amps. This page synthesizes distributor pricing tiers, drop-in same-package alternatives, and PCB-layout design notes that complement the official Microchip datasheet for the PIC24EP32MC202-E/MM.

견적 요청 문의하기
PIC24EP32MC202-E/SO - 70 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP32MC202-E/SO

PIC24EP32MC202-E/SO - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC202-E/SO is a 16-bit PIC24E family microcontroller engineered for high-performance motor control applications, featuring 32KB of Flash program memory, 4KB of RAM, and a 60 MIPS (70 MIPS with DSP instructions) modified Harvard architecture CPU. Housed in a 28-pin SOIC (0.295"/7.50mm body width) package, this MCU integrates enhanced on-chip peripherals including a 6-channel ADC with 10-bit/12-bit configurable resolution, motor control PWM modules, quadrature encoder interfaces, and 5V-tolerant I/O, enabling precision motor control systems that are energy efficient, quieter in operation, and have a great range and extended life. Operating voltage spans 3.0V to 3.6V with -40C to +125C extended industrial temperature range, meeting AEC-Q100 Grade 0 automotive-grade reliability requirements. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), working memory (RAM), and programmable I/O peripherals. Within the broader semiconductor hierarchy, an MCU sits under microcontrollers -> embedded processors -> digital ICs. The PIC24E family specifically targets digital signal control (DSC) workloads combining microcontroller simplicity with DSP throughput for motor control, power conversion, and audio processing. Key differentiating features of the PIC24EP32MC202 include 70 MIPS execution with single-cycle MAC operations, dedicated motor control PWM with complementary outputs and dead-band control, 6-channel 12-bit ADC with simultaneous sampling at up to 1.1 Msps, integrated op-amps and comparators for current sensing, and a 32KB self-programmable Flash with ECC. These peripherals are purpose-built for closed-loop FOC, sinusoidal commutation, and sensorless control algorithms in BLDC, PMSM, and ACIM drives. Architecturally, the PIC24E uses a 16-bit data path with 24-bit instruction words, dual-bus Harvard architecture for simultaneous Flash/RAM access, and a deterministic interrupt controller. The integrated DSP engine enables real-time FFT, IIR/FIR filtering, and Park/Clarke transforms on-chip, eliminating external DSP components in motor control loops. Typical applications include field-oriented control (FOC) of BLDC and PMSM motors, sensorless fan and pump controllers, HVAC blower drives, e-bike and e-scooter traction inverters, white-goods compressor drivers, and small industrial servo drives. The combination of AEC-Q100 qualification and extended temperature range allows deployment in automotive body and chassis subsystems. When designing with this part, populate the configuration bits early in firmware to lock the oscillator and watchdog before any code that depends on timing. Allocate PWM time bases so center-aligned mode and dead-band generators do not collide, and verify ADC sampling alignment with the PWM carrier to avoid current-sense jitter. This page synthesizes DigiKey distributor pricing, Microchip cross-reference equivalents, and practical motor-control design notes not found in the standalone datasheet.

견적 요청 문의하기
PIC24EP32MC202-E/SP - 70MIPS 16-bit Motor Control MCU, 32KB Flash | Microchip
PIC24EP32MC202-E/SP

PIC24EP32MC202-E/SP - 70MIPS 16-bit Motor Control MCU, 32KB Flash | Microchip

The Microchip PIC24EP32MC202-E/SP is a 16-bit 70 MIPS PIC24E Motor Control microcontroller housed in a 28-pin SPDIP (Skinny Plastic DIP) package, engineered specifically for high-performance precision motor control systems. It integrates 32 KB (10.7K x 24) of Flash program memory, 4 KB of SRAM, and a 60 MIPS core at 70 MHz operating speed. The device operates from a 3.0 V to 3.6 V single supply and is qualified to the AEC-Q100 standard for automotive applications, making it suitable for safety-critical motor control designs. The PIC24EP32MC202 belongs to the broader 16-bit microcontroller family, a class of MCUs that bridges the gap between 8-bit devices and 32-bit ARM Cortex-M parts. Within the embedded hierarchy, PIC24E sits between PIC16/PIC18 8-bit families and dsPIC33/PIC32 32-bit devices, offering higher performance (70 MIPS) than 8-bit MCUs while retaining a simpler toolchain and lower cost than 32-bit alternatives. The 'E' suffix denotes the Enhanced PIC24 family with DSP-like instructions, while the 'MC' indicates Motor Control variants with dedicated PWM, op-amp, and quadrature encoder interface peripherals. Key features of the PIC24EP32MC202 include a high-speed PWM module (MCPWM) with up to 7 PWM outputs, integrated operational amplifiers for current sensing, three on-chip analog comparators, a Peripheral Trigger Generator (PTG), and 12-bit ADC with dual sample-and-hold. The motor control PWM supports complementary, center-aligned, and edge-aligned modes with hardware dead-time generation, enabling direct drive of three-phase inverter bridges without external logic. The 60 MIPS core (70 MHz with PLL) provides the computational headroom needed for field-oriented control (FOC) and sensorless algorithms. Architecturally, the PIC24E core uses a 16-bit modified Harvard architecture with a 24-bit instruction word, allowing efficient C code compilation through Microchip's MPLAB XC16 compiler. The modified Harvard bus separates instruction and data paths to maximize throughput, while integrated DSP instructions accelerate the multiply-accumulate operations used in Park/Clark transforms for FOC. The integrated op-amps and comparators allow direct current-sense feedback from low-side shunt resistors, eliminating external analog conditioning in typical BLDC and PMSM drive designs. Typical applications include BLDC and PMSM motor control for appliances, drones, e-bikes, HVAC fans, automotive pumps and fans, and industrial servo drives. The integrated op-amps and MCPWM reduce BOM count for sensorless and sensored FOC implementations. The 28-pin SPDIP package supports through-hole assembly for legacy industrial designs and easy prototyping on breadboards. When designing with this device, ensure the ADC and op-amp reference voltages are properly decoupled to minimize noise coupling into current-sense signals. The MCPWM module requires careful configuration of dead-time registers to prevent shoot-through in half-bridge stages. The AEC-Q100 qualification supports automotive deployment, but designers should still apply ISO 26262 functional safety analysis for ASIL-rated systems. This page synthesizes distributor pricing, drop-in alternative analysis, application guidance, and design notes not consolidated on the manufacturer product page, providing a single reference for engineers and procurement teams.

견적 요청 문의하기
PIC24EP32MC202-I/MM - 70 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP32MC202-I/MM

PIC24EP32MC202-I/MM - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip PIC24EP32MC202-I/MM is a 16-bit PIC24E Motor Control microcontroller delivering 70 MIPS of computational throughput, 32 KB of Flash program memory and 4 KB of RAM, housed in a 28-pin QFN-S (MM) 6x6 mm exposed-pad package. The device integrates high-speed PWM, quadrature encoder interface (QEI), two operational amplifiers, three analog comparators and a peripheral trigger generator (PTG) to support precision motor-control closed-loop designs. A 16-bit microcontroller is a single-chip computer with a 16-bit data path, register file and ALU that offers a strong middle ground between 8-bit MCUs (cost-effective, simple) and 32-bit MCUs (highest performance). Within the embedded taxonomy, the PIC24EP32MC202 belongs to the PIC24E family -> dsPIC33/PIC24 16-bit MCU class -> 16-bit microcontrollers -> microcontrollers (MCU) -> embedded microcontrollers -> semiconductor ICs. It uses a Harvard architecture with separate program and data buses, allowing simultaneous fetch and operand access for deterministic real-time control. Key features of this part include an integrated 70 MIPS core (60 MHz FCY per industry listings), dedicated Motor Control PWM (MCPWM) with high-resolution edge placement, QEI for direct encoder feedback, on-chip op-amps for current sensing, comparators for back-EMF detection, and a flexible Peripheral Trigger Generator (PTG) for hardware state-machine driven sequencing. The 28-QFN package provides a low thermal resistance pad for high-current drive stages and supports operation over the -40C to +85C industrial range. The PIC24E core uses a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, allowing most instructions to execute in a single cycle. On-chip peripherals are mapped through a Peripheral Pin Select (PPS) scheme, simplifying PCB routing by allowing digital function remapping. Internal oscillators and a PLL reduce external component count. Typical applications include sensorless and sensored BLDC motor drives, PMSM field-oriented control (FOC), industrial servo drives, drone ESC controllers and automotive HVAC blowers. The integrated op-amps and comparators reduce the external analog front-end, while the PTG offloads timing-critical sequencing from the CPU. When designing with this part, ensure the exposed pad (EP) is soldered to a sufficient copper pour to meet thermal and electrical performance. Use Microchip's MPLAB X IDE and MPLAB XC16 compiler for development. The 'I' suffix indicates the -40C to +85C industrial temperature grade. This page synthesizes distributor stock, parametric specifications, drop-in alternatives and practical design notes that complement - and where useful extend - the official Microchip datasheet.

견적 요청 문의하기
PIC24EP32MC202-I/SP - 16-Bit 70MIPS MCU, 32KB Flash, 28-SPDIP | Microchip
PIC24EP32MC202-I/SP

PIC24EP32MC202-I/SP - 16-Bit 70MIPS MCU, 32KB Flash, 28-SPDIP | Microchip

The Microchip Technology PIC24EP32MC202-I/SP is a high-performance 16-bit microcontroller from the PIC24EP "Motor Control" family, delivering 70 MIPS of compute throughput while executing code from 32 KB (10.7K x 24) of on-chip Flash. It is offered in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package, runs from 3.0 V to 3.6 V, and is rated for the industrial -40 C to +85 C temperature range. The device is designed specifically for precision motor control and high-speed PWM-driven power conversion. A 16-bit MCU (microcontroller unit) is a single-chip computer built around a 16-bit data path, on-chip Flash program memory, RAM, and a rich set of peripherals such as ADCs, PWMs and communication interfaces. The PIC24E family sits in Microchip's dsPIC33/PIC24EP performance tier, positioned above PIC18F and below dsPIC33EP DSP controllers in the PIC taxonomy, and is classified as a Motor Control MCU optimized for closed-loop FOC, BLDC and PFC control loops. Key features include a 70 MIPS modified Harvard core, six 16-bit PWM channels with high-speed PWM (up to 1 ns edge resolution), 21 general-purpose I/O pins, a 6-channel 10-bit/12-bit ADC with up to 1.1 Msps conversion rate, two internal operational amplifiers for current sensing, four 16-bit timers, two I2C, two SPI and one UART interface, and 4 KB of RAM. The device also includes a 32-bit CRC engine, a real-time clock and multiple interrupt priority levels for deterministic motor control latency. Technically, the PIC24EP32MC202 integrates dedicated motor-control peripherals (PWM, op amps and ADC with tight synchronization) that remove the need for an external DSP for many sensorless and sensored BLDC / PMSM designs. The high-speed PWM module can be time-base synchronized with the ADC, allowing sampling of phase currents at the exact PWM midpoint to maximize noise rejection. Typical applications include BLDC and PMSM motor controllers, sensorless fan and pump drives, power inverters, industrial drives, and digital power supplies with PFC. The wide operating temperature range and on-chip op amps simplify analog front-end design for shunt-based current sensing. When designing with this MCU, ensure the VDDCORE pin is decoupled with 10 uF + 0.1 uF, and reserve one PWM channel pair for ADC trigger to maintain deterministic current sampling.

견적 요청 문의하기
PIC24EP32MC202T-E/SS - 16-bit 60 MIPS 32KB Flash MCU | Microchip
PIC24EP32MC202T-E/SS

PIC24EP32MC202T-E/SS - 16-bit 60 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC202T-E/SS is a 16-bit microcontroller from the PIC24EP family, featuring a PIC core operating at up to 60 MIPS with 32KB of Flash program memory (10.7K x 24) and 2KB of RAM, housed in a 28-pin SSOP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and peripheral interfaces onto one silicon die. The PIC24E sub-family is Microchip's high-performance 16-bit DSP-enhanced architecture, and the PIC24EP32MC202T-E/SS specifically targets motor-control applications, sitting within the broader taxonomy of microcontroller -> embedded controller -> semiconductor IC. Key features include a 60 MIPS CPU with DSP instructions, 32KB self-programmable Flash, 2KB SRAM, integrated motor-control PWM with dedicated time base, 12-bit ADC up to 1.1 Msps, and a rich connectivity set (I2C, IrDA, LIN, SPI, UART/USART). The AEC-Q100 qualification makes it suitable for automotive applications, and it operates across an extended temperature range suitable for harsh industrial environments. The device uses a modified Harvard architecture with separate program and data buses, plus a 16 x 16-bit hardware multiplier that enables single-cycle MAC operations critical for field-oriented motor control loops. The 32KB Flash supports live update via the in-circuit serial programming interface. Typical applications include BLDC/PMSM motor drives, sensorless motor control, automotive HVAC actuators, industrial variable-frequency drives, and power-conversion control boards where deterministic PWM edge timing and fast ADC sampling directly impact torque ripple and acoustic noise performance. When designing with this part, ensure the supply decoupling network includes 100nF and 10uF capacitors placed within 5mm of the VDDCORE pin; ignore this and high-current digital switching will couple into the analog supply, degrading ADC SNR by several dB. This page synthesizes distributor pricing, drop-in alternatives across temperature grades and packaging, and practical design notes not consolidated on any single manufacturer datasheet page.

견적 요청 문의하기
PIC24EP32MC202T-I/SS - 16-Bit 70 MIPS 32KB Flash MCU | Microchip
PIC24EP32MC202T-I/SS

PIC24EP32MC202T-I/SS - 16-Bit 70 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24EP32MC202T-I/SS is a 16-bit PIC24E-family microcontroller engineered for high-performance motor control, delivering 70 MIPS of CPU throughput from a 28-pin SSOP (5.30 mm body) package. The device integrates 32 KB of self-programmable Flash program memory (10.7K x 24 instruction words) alongside 2 KB of SRAM, with 4 KB of dedicated motor-control PWM RAM, and is built on a modified Harvard architecture with a 16-bit data path. Core supply is 3.0-3.6 V with an internal 1.8V LDO regulator that supports full-speed operation down to 3.0 V. A 16-bit microcontroller (MCU) is a single-chip processor whose internal registers, data bus, and ALU operate on 16-bit words, enabling higher computational throughput than 8-bit MCUs while typically consuming less power and code footprint than 32-bit devices. The PIC24EP family sits within the broader PIC microcontroller hierarchy (PIC10/12/16/18 8-bit -> PIC24 16-bit DSC -> PIC32 32-bit), and is specifically classified as a Digital Signal Controller (DSC), pairing a CPU core with DSP-aware instructions and on-chip peripherals aimed at closed-loop, time-critical control. Motor-control MCUs like the PIC24EP add dedicated PWM, op-amps, ADCs, and quadrature encoder interfaces to support FOC and trapezoidal commutation. Key features include 6 channels of high-speed PWM with 1.04 ns PWM resolution, dual 10-bit 1.1 Msps ADCs with up to 10 S&H channels for synchronized current/voltage sampling, four on-chip op-amps configurable as gain stages for current shunt amplifiers, and a Quadrature Encoder Interface (QEI). The device also offers two I2C, two SPI, two UART, and a Parallel Master Port. With AEC-Q100 qualification available on the extended-temperature -E variant, the family is suited to both industrial and automotive motor drive designs. The PIC24E core executes most instructions in one cycle and supports DSP-class multiply-accumulate and barrel shifting, which together with the integrated op-amps and high-resolution PWM allows a single chip to execute field-oriented control loops at PWM frequencies of 20 kHz and above without external DSPs. This integration reduces BOM count, PCB area, and firmware complexity in BLDC, PMSM, and stepper drives. Typical applications include BLDC/PMSM motor drives, low-voltage sensorless fan pumps, HVAC blower control, e-bike and e-scooter controllers, white-goods inverter boards, and small industrial servo drives. Designers value the part for its on-chip op-amps (saving four external amplifiers), 1 ns PWM edge placement, and 70 MIPS deterministic core for tight control loops. A key design consideration is PCB thermal management under high PWM switching loads with 1 A sink/source on output pins; the SSOP-28 thermal pad should be soldered to a copper pour to keep junction rise modest. Decoupling VDD/VSS with 100 nF plus 4.7 µF bulk capacitors placed within 5 mm of the supply pins is also recommended for stable analog performance.

견적 요청 문의하기
PIC24EP32MC203-E/M5 - 60 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP32MC203-E/M5

PIC24EP32MC203-E/M5 - 60 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC203-E/M5 is a 16-bit PIC24EP family microcontroller engineered for high-performance motor control, delivering 60 MIPS at 70 MHz core speed with 32 KB (10.7K x 24) Flash and 4 KB RAM, housed in a 36-pin VTLA (5x5 mm) QFN-style exposed-pad package. The integrated Motor Control PWM (MCPWM), on-chip op-amps, comparators, and Peripheral Trigger Generator (PTG) provide the analog and timing infrastructure required to drive field-oriented control (FOC), sensorless BLDC, and stepper motor loops from a single chip. AEC-Q100 qualification supports automotive deployment, while the 'E' temperature grade extends the operating range to -40C to +125C for under-hood and industrial environments. What is a 16-bit motor-control MCU? A 16-bit microcontroller is a single-chip processor with a 16-bit data path and instruction word, sitting between 8-bit MCUs (PIC16, PIC18) and 32-bit Cortex-M devices in performance and code density. A motor-control variant integrates high-resolution PWMs, fast ADCs, op-amps for current sensing, and analog comparators that close the current/torque feedback loop without external components. In the broader taxonomy: MCU -> 16-bit MCU -> DSP-enhanced MCU (dsPIC) -> motor-control MCU -> embedded controller, the PIC24EP occupies the sweet spot where deterministic PWM, modest DSP, and low BOM cost converge for sub-1 kW drive applications. Key features include up to six PWM channels with complementary outputs and dead-band control, dual op-amps with programmable gain for current shunt amplification, three analog comparators for back-EMF and fault detection, a 10-bit ADC with up to 1.1 Msps conversion, and the Peripheral Trigger Generator that coordinates ADC-PWM timing without CPU intervention. The 60 MIPS core executes a 70 MHz instruction cycle and supports DSP intrinsics, enabling Park/Clarke transforms for sensorless FOC. Typical applications include BLDC/PMSM motor drives for automotive auxiliary pumps, HVAC blowers, e-bike controllers, drone ESCs, industrial servo drives, and small appliances. When designing with this part, allocate the VTLA exposed pad as the primary thermal dissipation path; the small 5x5 mm package concentrates heat from the internal op-amps under sustained 100% duty-cycle operation, so route 4-6 thermal vias directly under the EP to the inner power plane.

견적 요청 문의하기
PIC24EP32MC203-E/TL - 16-Bit MCU 32KB Flash 70 MIPS Motor Control | Microchip
PIC24EP32MC203-E/TL

PIC24EP32MC203-E/TL - 16-Bit MCU 32KB Flash 70 MIPS Motor Control | Microchip

The Microchip Technology PIC24EP32MC203-E/TL is a 16-bit PIC24E family digital signal controller with 32 KB of Flash program memory and 4 KB of SRAM, built around a 70 MIPS (70 MHz) modified Harvard core and packaged in a 36-pin VTLA (6x6 mm) surface-mount module with an exposed thermal pad. The part is qualified to the AEC-Q100 automotive reliability standard and integrates high-speed PWM (Motor Control PWM, MCPWM), operational amplifiers, comparators and a peripheral trigger generator (PTG) for advanced motor-control loops. A digital signal controller (DSC) is a microcontroller that combines a deterministic MCU control core with the DSP multiply-accumulate capability needed for real-time math on sensor waveforms. In the broader taxonomy, the PIC24EP32MC203 sits in the PIC24E dsPIC DSC family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor, and is positioned for high-performance, precision motor control applications such as BLDC, PMSM and stepper drives. Key features include three op-amp/Comparator pairs that can directly condition motor phase currents, a 12-bit ADC with up to 16 channels and 1.1 Msps conversion rate, dedicated high-resolution 7-channel PWM outputs (PWM with 1.04 ns resolution), 1.8-3.6 V VDD operation with 5 V tolerant digital inputs, and a -40C to +125C (E) extended operating temperature range. The integrated PTG allows hardware sequencing of ADC and PWM triggers without CPU intervention, enabling low-latency torque loops at high PWM frequencies. The architecture combines a 16-bit data path with DSP instructions (MAC), 16 working registers, a hardware multiply/divide and tightly-coupled peripherals, allowing both fast control loops and signal processing in a single device. Internal oscillator, PLL, and run-time self-calibration reduce external component count, while the peripheral trigger generator, PWM with 1 ns edge placement, and 1 Msps ADC work together for field-oriented control with very low jitter. Typical applications include 3-phase BLDC and PMSM motor drives (drone ESCs, e-bike controllers, appliance fans and pumps), field-oriented control (FOC) power tool drives, automotive HVAC blowers and pumps, LED lighting drivers, digital power conversion stages, and industrial servo amplifiers. The AEC-Q100 qualification also suits harsh-environment automotive and industrial deployments. When designing with this device, reserve adequate PCB area for the exposed thermal pad of the 36-pin VTLA package and stitch the thermal pad to the ground plane with multiple thermal vias. For motor-control firmware, set the PWM period to match the inverter's switching frequency (typically 20-100 kHz) and ensure ADC sampling is hardware-triggered to align with PWM centre points to minimize current-sense noise. This page combines current distributor pricing, verified AEC-Q100 motor-control alternatives in the same VTLA-36 footprint, and practical design notes drawn from Microchip's motor-control documentation - information not all aggregated in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP32MC203-I/M5 - 16-bit 70MIPS Motor Control MCU | Microchip
PIC24EP32MC203-I/M5

PIC24EP32MC203-I/M5 - 16-bit 70MIPS Motor Control MCU | Microchip

The Microchip Technology PIC24EP32MC203-I/M5 is a 16-bit, 70 MIPS PIC24E-family microcontroller optimized for high-performance precision motor control, integrating 32 KB of Flash program memory, 4 KB of RAM, dedicated motor-control PWMs, on-chip operational amplifiers, and high-speed analog in a 36-pin VTLA 5x5 mm package. Operating from 3.0 V to 3.6 V across the industrial -40C to +85C range, it pairs a 16-bit modified-Harvard CPU core with DSP instructions and a Motor Control PWM (MCPWM) module that simplifies three-phase BLDC, PMSM, and AC-induction drive design. A 16-bit microcontroller (MCU) is a single-chip computer that executes instructions with a 16-bit data width, providing a balance between 8-bit cost efficiency and 32-bit computational power. In the system hierarchy it sits above 8-bit MCUs but below 32-bit ARM Cortex-M cores, excelling at deterministic real-time control and DSP-style signal processing where code density and predictable interrupt latency matter more than raw clock speed. Motor-control variants such as the PIC24EP32MC203 add dedicated peripherals—PWMs with programmable dead time, on-chip op-amps for current sensing, and fast ADCs—shrinking the BOM for sensorless FOC and field-oriented control loops. Key specifications include 32 KB (10.7K x 24) Flash with 4 KB RAM, 25 general-purpose I/O pins, two ADC modules delivering 8 channels at 10-bit and 8 channels at 12-bit resolution, three on-chip operational amplifiers for current shunt amplification, two analog comparators, a Peripheral Trigger Generator (PTG), and Communication interfaces such as UART, SPI, I2C, and ECAN. The MCPWM module offers complementary outputs with programmable dead time and fault inputs, while the on-chip op-amps are trimmed for low-offset current sensing in two- or three-shunt configurations used in vector-control drives. The PIC24E architecture uses a wide 16-bit datapath with single-cycle MAC and divide hardware that sustains 70 MIPS at 60 MHz, allowing the CPU to handle field-oriented control math without offloading to an external DSP. Integrated peripherals such as the Peripheral Trigger Generator (PTG) and high-speed ADC minimize CPU load and reduce latency between sensing and switching, which is critical for high-RPM FOC where every microsecond affects torque ripple. Typical applications include sensorless and sensored BLDC and PMSM motor drives, low-voltage industrial fans and pumps, drone ESCs, robotic servos, appliance motor control, and battery-powered tools. The integrated op-amps and comparators simplify current-sense front-ends, reducing external component count and PCB area. When designing with this MCU, allocate board space for the exposed thermal pad (EP) and follow Microchip layout notes to maintain ADC accuracy; place 0.1uF ceramic decoupling caps adjacent to every VDD pin and route analog/digital grounds with a single-point star. This page combines distributor pricing, same-family drop-in alternatives, and practical design notes derived from Microchip datasheets, providing engineering context not found in the standalone datasheet PDF.

견적 요청 문의하기