집적 회로

하위 카테고리

📁 ADC/DAC 2520 제품 📁 증폭기 IC 800 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 314 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1603 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18756 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32865)

PIC24EP512MC206-I/PT - 70 MIPS 512KB Flash Motor Control MCU | Microchip
PIC24EP512MC206-I/PT

PIC24EP512MC206-I/PT - 70 MIPS 512KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24EP512MC206-I/PT is a high-performance 16-bit PIC24E microcontroller delivering 70 MIPS of computational throughput, 512 KB of Flash program memory, and 48 KB of RAM in a 64-pin TQFP (10x10 mm) package. The device integrates dedicated motor-control peripherals including a Quadrature Encoder Interface (QEI), Motor Control PWM (MCPWM) modules, and on-chip operational amplifiers, enabling single-chip precision drives for BLDC, PMSM, ACIM, and stepper motors. A 16-bit MCU (Microcontroller Unit) is a class of embedded processor that balances deterministic real-time performance with rich peripheral integration. Within the broader taxonomy, the PIC24E family is a digital signal controller (DSC) class device — hybrid MCUs that combine microcontroller ease-of-use with DSP-class throughput for sensor-rich, closed-loop applications. As part of Microchip's PIC24E motor-control family, this part targets high-end motion-control designs where code density, deterministic interrupt latency, and dedicated motor-control hardware reduce or eliminate the need for external FPGAs or DSP coprocessors. Key specifications include 70 MIPS core speed at 60 MHz CPU clock, 512 KB Flash (170K x 24), 48 KB SRAM, dual 10-bit and 12-bit ADC modules, communication peripherals (I2C, SPI, UART, LIN, IrDA), and an extended operating voltage range of 3.0 V to 3.6 V with industrial -40 C to +85 C temperature support. Internal op-amps eliminate external signal conditioning for current sensing, while hardware QEI simplifies encoder-based position feedback. Architecturally, the PIC24E uses a modified Harvard bus with a 24-bit instruction word, single-cycle hardware MAC, and zero-cycle hardware divide, achieving DSP-class signal-processing throughput while retaining 16-bit MCU code density. The on-chip CTMU (Charge Time Measurement Unit) supports capacitive touch and time-based sensing. Peripheral Trigger Generator (PTG) coordinates complex peripheral sequences without CPU intervention. Typical applications include field-oriented control (FOC) motor drives, sensorless and sensored BLDC/PMSM controllers, industrial servo amplifiers, fan/pump controllers, robotic actuators, and HVAC compressor drives. Designers favor the part for its deterministic interrupt latency, integrated op-amps for current shunt amplification, and hardware QEI for resolver-free encoder feedback. When designing with this MCU, allocate sufficient decoupling (100 nF ceramic per VDD/AVDD pair plus bulk) and follow the recommended PCB layout for the analog and digital ground split. For high-noise motor environments, the MCPWM dead-time control and fault input pin allow cycle-by-cycle shutdown on over-current without CPU latency. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same PIC24E family, and practical design notes drawn from Microchip application notes — content not consolidated in any single manufacturer datasheet.

견적 요청 문의하기
PIC24EP512MC206T-E/MR - 16-Bit 60MIPS 512KB Flash MCU | Microchip
PIC24EP512MC206T-E/MR

PIC24EP512MC206T-E/MR - 16-Bit 60MIPS 512KB Flash MCU | Microchip

The Microchip Technology PIC24EP512MC206T-E/MR is a 16-bit PIC24E microcontroller delivering up to 60 MIPS of CPU performance with 512 KB (170K x 24-bit) of Flash program memory and 48 KB of SRAM, packaged in a 64-pin 9x9 mm VQFN (MR) with exposed thermal pad. It is qualified to the AEC-Q100 automotive standard and operates from a 3.0-3.6 V rail, targeting motor-control and high-end embedded applications. The "T" suffix denotes tape-and-reel packaging, and "E" denotes the -40C to +125C extended/automotive temperature grade. What is a PIC24E microcontroller? The PIC24E is Microchip's 16-bit enhanced MCU family, positioned in the taxonomy as 16-bit microcontroller -> dsPIC DSC -> PIC microcontroller family -> Microchip 8/16/32-bit MCU portfolio -> embedded processing. PIC24E devices combine a Harvard-architecture DSP-enhanced CPU, high-speed ADC, motor-control PWM, op-amps, comparators, and a Charge Time Measurement Unit (CTMU) in a single chip, sitting between 8-bit PIC10/12/16/18 MCUs and 32-bit PIC32MX/PIC32MZ MCUs. They are commonly used where deterministic real-time control and DSP math are required without the overhead of a 32-bit core. The PIC24EP512MC206T-E/MR integrates a 16-channel 10-bit ADC (configurable up to 12-bit on selected variants), a 70 MIPS dsPIC-style DSP engine, dedicated motor-control peripherals (3 op-amps, 4 comparators, PWM with fault inputs and quadrature encoder interface), and supports I2C, SPI, UART, LIN, and IrDA. The 64-pin QFN-9x9 footprint includes a thermal pad that pulls dual function as both the analog ground reference and the primary heat-dissipation path. The family is the recommended Microchip platform for FOC, BLDC, PMSM, and PFC motor-control designs. Typical applications include BLDC/PMSM motor drives, industrial automation PLCs, automotive body controllers, sensorless field-oriented control, LED lighting controllers, and digital power conversion (PFC/LLC). For motor-control applications the integrated op-amp/comparator chain reduces BOM and PCB area compared with discrete analog front-ends. Design consideration: when routing the PCB, tie the exposed pad directly to AGND with at least 16 thermal vias to a 1 oz copper inner plane. For best ADC SNR results keep the analog and digital ground planes physically separate and join them at a single point under the QFN thermal pad. The T-variant tape-and-reel pack and the E-grade extended temperature make this part specifically suited to high-volume automotive production lines. This page combines distributor pricing, drop-in same-brand alternatives (PIC24EP512GP206 family), application references, and design notes into a single technical hub not found on the standalone Microchip datasheet, helping procurement, EE hardware, and firmware engineers accelerate motor-control design-in and BOM consolidation decisions.

견적 요청 문의하기
PIC24EP512MC206T-I/PT - 70 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP512MC206T-I/PT

PIC24EP512MC206T-I/PT - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip PIC24EP512MC206T-I/PT is a 16-bit MCU from the PIC24EP family designed for high-performance motor control and digital signal control. It operates up to 70 MIPS with a 60 MHz CPU clock, integrates 512 KB (170K x 24) of Flash program memory and 48 KB RAM, and is housed in a 64-pin TQFP (PT) package rated -40C to +85C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and configurable peripherals such as timers, ADC, PWM, and communication interfaces. Within the product hierarchy, the PIC24EP sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M devices, and belongs to the broader class of digital signal controllers (DSCs) that combine deterministic control peripherals with DSP-class throughput for closed-loop applications. Key features include integrated Motor Control PWM (MCPWM) with up to 14 PWM channels, a Quadrature Encoder Interface (QEI) for rotor position feedback, dual 10-bit/12-bit ADC modules, internal op-amps and comparators, CTMU charge-time measurement, and USB-OTG plus CAN, SPI, I2C, and UART interfaces. The 512 KB Flash and 48 KB RAM support large firmware for sensorless FOC and field-oriented control algorithms. The architecture uses a modified Harvard core with single-cycle 16x16 MAC, hardware DO/REPEAT loops, and zero-overhead interrupt nesting - enabling deterministic execution of high-rate control loops. Internal DSP acceleration and 70 MIPS throughput make it well suited for both trapezoidal and field-oriented BLDC/PMSM control schemes. Typical applications include BLDC and PMSM motor drives, industrial inverters, field-oriented control (FOC) drives, sensorless motor control, robotics, servo amplifiers, and home appliances. The wide temperature range and rich motor peripherals enable compact, energy-efficient motor designs. When designing with this device, allocate PCB area for the 64-pin TQFP land pattern and follow Microchip's analog-ground and decoupling guidance. The internal op-amps reduce BOM cost, but external filtering is recommended for noisy motor environments. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and motor-control design considerations not compiled in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP64GP202-E/MM - 16-Bit 60 MIPS MCU, 64KB, 28-QFN | Microchip
PIC24EP64GP202-E/MM

PIC24EP64GP202-E/MM - 16-Bit 60 MIPS MCU, 64KB, 28-QFN | Microchip

The Microchip Technology PIC24EP64GP202-E/MM is a 16-bit microcontroller from the PIC24E general-purpose MCU family, delivering up to 70 MIPS core performance with 64 KB of Flash program memory (22K x 24) and housed in a 28-pin QFN-S (6x6 mm) package with exposed pad. The device operates from a 3.0 V to 3.6 V supply, supports 60 MHz operation, and integrates high-performance peripherals for demanding embedded applications. What is a PIC24E microcontroller? A PIC24E MCU is a 16-bit Harvard-architecture microcontroller from Microchip that sits in the dsPIC/PIC24 family hierarchy (16-bit MCU -> microcontroller -> embedded IC -> semiconductor). Compared with 8-bit PIC MCUs, the PIC24E delivers a much higher MIPS-per-MHz ratio, wider 16-bit data path, hardware multiply/divide, larger linear address space, and DSP-oriented instruction support, making it the bridge between 8-bit PIC16/18 designs and full dsPIC33 digital signal controllers. Key features include 8 KB SRAM, integrated op amps, a Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement, a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing, and superior ADC performance for precision analog designs. The 28-QFN package exposes a thermal pad for low theta_JA operation and supports up to 21 general-purpose I/O pins plus peripheral functions such as UART, SPI, I2C, PWM, and a 10/12-bit ADC. Typical applications span industrial control, motor drive, LED lighting, power conversion, sensor conditioning, USB device interfaces (with companion parts), medical instrumentation, and AEC-Q100 automotive subsystems where the -E (extended temperature, -40°C to +125°C) variant is required. When designing with this MCU, ensure the 3.3V rail is decoupled with a 100 nF + 10 µF combination close to the VDD pins and that the exposed pad is soldered to a sufficient copper pour for thermal relief. The PGECx/PGEDx pair must be reserved for ICSP unless the debugger is disabled in configuration bits. This page synthesizes distributor pricing, drop-in same-family PIC24E alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and design engineers make faster, more informed decisions.

견적 요청 문의하기
PIC24EP64GP202-E/SO - 16-Bit 60 MIPS 64KB Flash MCU | Microchip
PIC24EP64GP202-E/SO

PIC24EP64GP202-E/SO - 16-Bit 60 MIPS 64KB Flash MCU | Microchip

The Microchip PIC24EP64GP202-E/SO is a 16-bit microcontroller from the PIC24EP family, featuring a 60 MIPS (70 MHz) dsPIC/PIC24E core with 64 KB Flash program memory and 8 KB RAM, housed in a 28-pin SOIC (SO) wide-body package. It is qualified to the AEC-Q100 automotive standard, runs from a single 3.0 V to 3.6 V supply, and offers 21 general-purpose I/O pins plus enhanced analog peripherals including operational amplifiers, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG). A PIC microcontroller (Programmable Interface Controller) is a Harvard-architecture RISC MCU widely used for embedded control, combining a CPU, Flash program memory, SRAM, EEPROM, timers, ADC, and digital I/O on a single die. Within Microchip's hierarchy it sits in the PIC24E general-purpose family - the "EP" suffix denotes Enhanced Performance with op-amps and CTMU, and "GP" denotes General Purpose variants rather than motor-control or USB-focused siblings. Key features include a 16-channel 10-bit ADC capable of 500 ksps, a 12-channel 16-bit PWM/timer/capture module, op-amp peripherals, a USB 2.0 full-speed On-The-Go interface, and multiple serial interfaces (UART, SPI, I2C). The 70 MIPS execution throughput and 16-bit data path enable efficient DSP-style math (single-cycle MAC) for sensor fusion and digital filtering tasks. Architecturally the PIC24EP64GP202 uses a 24-bit instruction word with 16-bit data paths and dual-bus Harvard design, giving deterministic interrupt latency and predictable code execution. The integrated op-amps, CTMU, and PTG offload analog signal-chain work from the CPU and let peripherals trigger each other without software overhead. Typical applications include automotive body and sensor nodes, industrial motor-control auxiliary boards, sensor-conditioning front ends, USB device firmware, and portable instrumentation. The combination of op-amps + ADC + USB is unusually strong for signal-chain firmware development. When designing with this part, note that the E suffix indicates -40C to +125C automotive temperature grade and the SO package is 7.50 mm wide-body SOIC. Apply proper decoupling, follow Microchip's recommended layout for the USB DP/DM lines, and configure unused pins as outputs per the datasheet to minimize current draw. This page synthesizes distributor pricing, AEC-Q100 cross-reference notes, and practical design guidance not present in the bare datasheet PDF.

견적 요청 문의하기
PIC24EP64GP202-E/SS - 16-Bit 60 MIPS 64KB Flash MCU | Microchip
PIC24EP64GP202-E/SS

PIC24EP64GP202-E/SS - 16-Bit 60 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64GP202-E/SS is a 16-bit microcontroller from the PIC24EP "GP" general-purpose family, delivering 60 MIPS performance from a 70 MIPS-capable core, with 64 KB (22K x 24) of Flash program memory and 4 KB RAM in a 28-pin SSOP package. The "E" suffix denotes the extended industrial temperature grade (-40C to +125C), and the device targets high-end general-purpose designs needing advanced analog, high-speed PWM, and rich connectivity. This device belongs to the broader microcontroller (MCU) category, which in a system hierarchy sits below microprocessors but above discrete digital logic; the PIC24EP family specifically is a 16-bit Harvard-architecture MCU family from Microchip, positioned between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts. MCUs integrate CPU core, program memory (Flash), data memory (RAM), peripherals, and I/O onto a single IC, replacing multi-chip discrete logic implementations. Key features of the PIC24EP64GP202-E/SS include a 16-bit modified Harvard core with single-cycle MAC, 64 KB self-programmable Flash with ECC, 4 KB SRAM, integrated op-amps, a Charge Time Measurement Unit (CTMU), a Peripheral Trigger Generator (PTG), and a high-performance 10/12-bit ADC. The 28-SSOP package keeps the design compact while exposing 21 general-purpose I/O pins. The 3.0 V to 3.6 V single-supply operation simplifies power-tree design. Typical applications include industrial control, motor drive (BLDC/PMSM) commutation, sensor signal conditioning, USB-device nodes, SMPS digital control, and AEC-Q100 automotive subsystems. The combination of op-amps and CTMU on-chip reduces the external analog chain, lowering BOM cost and PCB area. For power-budgeting, remember that core MIPS draw is strongly tied to CPU utilization; gate unused peripherals via PMD registers to hit deep sleep currents. Place a 0.1 uF decoupling capacitor within 5 mm of every VDD/VSS pair and use a bulk 4.7 uF tantalum or ceramic close to the IC for ADC reference stability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

견적 요청 문의하기
PIC24EP64GP202-I/MM - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip
PIC24EP64GP202-I/MM

PIC24EP64GP202-I/MM - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip

The Microchip Technology PIC24EP64GP202-I/MM is a 16-bit microcontroller from the PIC24EP GP family, delivering 70 MIPS of CPU performance from a modified Harvard architecture core running up to 70 MHz (with 60 MHz FOSC cited in some distributor summaries). Housed in a 28-pin QFN-S 6x6 mm package with an exposed thermal pad, the device integrates 64 KB of Flash program memory (22K x 24 words) and 8 KB of SRAM, and operates from a 3.0 V to 3.6 V supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data RAM, and a rich set of peripherals on one silicon die. The PIC24EP family sits in Microchip's 16-bit DSC/MCU portfolio, hierarchically placed above 8-bit PIC16/PIC18 MCUs and below the 32-bit PIC32 families. This part is targeted at high-end general-purpose embedded designs that need more compute and analog performance than 8-bit MCUs but do not justify migrating to a 32-bit core. Key features include a 12-bit ADC with up to 10/12 Msps sampling (family capability), dedicated op amps, a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing, a Peripheral Trigger Generator (PTG) for hardware-event sequencing, and a 16-bit motor-control PWM peripheral, alongside USB 2.0 full-speed On-The-Go on related family members. The architecture combines a 16-bit data path with 24-bit instructions, which improves code density relative to 32-bit cores and eases C compiler efficiency. Internal PLLs allow the core to run faster than the external crystal. The 28-QFN-S package includes a thermal pad for improved heat dissipation in industrial temperature ranges (-40 C to +85 C for this -I grade). Typical applications include industrial control boards, sensor signal conditioning, USB peripherals, motor-control companion logic, and general-purpose 16-bit embedded platforms where analog integration (ADC, op amps, CTMU) reduces external component count. When designing with this device, allocate ADC and op-amp pinout early and follow Microchip's analog-ground PCB guidelines (separate AGND/AVSS pour, decouple Vcap/Vddcore). The Peripheral Trigger Generator requires MPLAB X IDE plugin configuration, and op-amp input ranges must respect rail-to-rail limits. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same PIC24EP family, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP64GP202-I/SP - 70 MIPS 64KB Flash 16-bit MCU | Microchip
PIC24EP64GP202-I/SP

PIC24EP64GP202-I/SP - 70 MIPS 64KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24EP64GP202-I/SP is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, featuring a high-speed 70 MIPS core, 64 KB of Flash program memory, 8 KB of SRAM, and a 28-pin SPDIP (Skinny Plastic DIP) package. Operating from 3.0V to 3.6V, it integrates advanced features such as a Peripheral Trigger Generator (PTG), Charge Time Measurement Unit (CTMU), three on-chip op-amps, four comparators, and superior ADC performance for high-end general-purpose embedded designs. A 16-bit microcontroller (MCU) is a microprocessor core with a 16-bit data path, ALU, and register width that balances computational throughput against code density. The PIC24EP series uses a modified Harvard architecture with separate program and data buses plus DSP extensions, positioning it above 8-bit MCUs in the hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU) while remaining below dedicated DSP controllers. It is widely used for motor control, power conversion, sensor fusion, and real-time control loops where deterministic interrupt response and rich analog peripherals are required. Key features of the PIC24EP64GP202 include 64 KB (22K x 24) Flash, 8 KB RAM, a 16-channel 12-bit ADC with up to 500 ksps conversion rate, three op-amps for signal conditioning, four comparators for fast threshold detection, four general-purpose 16-bit timers, and a Peripheral Trigger Generator that automates peripheral sequencing without CPU intervention. The device supports communication interfaces including UART, SPI, and I2C. The architecture combines a 16-bit CPU with DSP instructions and a hardware multiplier for single-cycle MAC operations. The CTMU allows precise time measurement for capacitive touch and current sensing, while the PTG can orchestrate peripheral events to offload timing-critical tasks. This blend makes the PIC24EP64GP202 well suited for sensor interfacing and closed-loop control. Typical applications include industrial motor control, sensor signal conditioning, power conversion, capacitive touch human-machine interfaces, and embedded control systems requiring 16-bit performance at moderate cost. The wide operating temperature range of -40C to +85C supports industrial and consumer environments. When designing with this MCU, plan for adequate decoupling with 100 nF ceramic capacitors near each VDD pin, ensure the MCLR reset circuit follows Microchip reference design guidelines, and reserve the PGxI for ISP programming access. The 70 MIPS performance requires a stable clock source and proper layout for EMI-sensitive applications. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternative MPNs from the same PIC24EP family, and practical design considerations not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP64GP202-I/SS - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip
PIC24EP64GP202-I/SS

PIC24EP64GP202-I/SS - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip

The Microchip Technology PIC24EP64GP202-I/SS is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring a 70 MIPS high-performance core, 64 KB (22K x 24) of Flash program memory, 8 KB of RAM, and housed in a 28-pin SSOP (5.30 mm body width, 0.65 mm pitch) package. The device operates from 3.0 V to 3.6 V and delivers up to 70 MIPS at 70 MHz CPU clock, integrating 21 analog channels of 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and CTMU (Charge Time Measurement Unit) plus on-chip op-amps for advanced analog front-end designs. A 16-bit MCU is a microcontroller whose data path, registers, and ALU natively operate on 16-bit words, doubling the throughput and code density of 8-bit devices such as PIC18 while keeping deterministic interrupt latency. Within the broader semiconductor hierarchy, the PIC24EP sits above PIC24F/dsPIC33F performance parts and below 32-bit ARM Cortex-M families; it is optimized for real-time control loops, mixed-signal conditioning, and motor control where deterministic DSP-style instructions matter. Key features include 21 ADC channels at up to 500 ksps (10-bit mode), 6 general-purpose timers, Peripheral Trigger Generator (PTG) for automated peripheral sequencing, dual comparators with 32-bit capture, and a Peripheral Pin Select (PPS) system that maps digital peripherals to a wide choice of I/O pins. The CTMU and integrated op-amps enable touch sensing, capacitive measurement, and current-loop signal conditioning without external analog ICs. The PIC24EP64GP202 architecture uses a modified Harvard structure with separate program (Flash) and data (SRAM) buses, a hardware multiplier/divider, and DSP-aware instructions for motor-control and digital-filter math. PPS routing, dual-partition Flash with live update, and JTAG/ICSP debug support round out the silicon, while the SSOP-28 footprint targets hand-solder-friendly prototyping as well as volume SMT assembly. Typical applications include industrial sensor conditioning, BLDC/PMSM motor control, general-purpose digital power conversion, USB device/host stacks (with companion parts), and consumer audio or appliance controllers. The wide ADC channel count and on-chip op-amps make it a strong fit for instrumentation front-ends that previously needed a separate analog SoC. When designing with this part, plan I/O assignments through the PPS system before PCB layout, and provision external bulk capacitance near VDD/VSS because simultaneous ADC and PWM switching can pull transients beyond the on-chip decoupling. Use the PTG to offload deterministic peripheral timing from the CPU and free cycles for control loops. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP64GP202T-E/MM - 16-bit MCU 64KB Flash 60MHz 28-QFN | Microchip
PIC24EP64GP202T-E/MM

PIC24EP64GP202T-E/MM - 16-bit MCU 64KB Flash 60MHz 28-QFN | Microchip

The Microchip Technology PIC24EP64GP202T-E/MM is a 16-bit PIC24EP general-purpose microcontroller delivering 60 MIPS performance with 64KB Flash and 8KB SRAM in a 28-pin QFN-S (6x6 mm) package. The device integrates a high-speed modified Harvard architecture core, 12-bit ADC, op amps, CTMU, USB, and Peripheral Trigger Generator for advanced analog signal-chain applications. A 16-bit microcontroller is a single-chip computer that processes data and instructions in 16-bit chunks, offering a middle ground between 8-bit simplicity and 32-bit computational power. PIC24E-family MCUs sit within the broader taxonomy of microcontroller -> embedded processor -> semiconductor device. They are widely used where the arithmetic precision of a 16-bit DSP-like core is needed without paying the cost or power overhead of 32-bit Cortex-M parts. The PIC24EP64GP202 provides 64KB of program memory (22K x 24 instruction words), 8KB SRAM, and runs from a 3.0V to 3.6V single supply. Up to 21 general-purpose I/O pins are available on the 28-QFN variant, alongside nine 16-bit timers, multiple UART/SPI/I2C peripherals, USB 2.0 full-speed OTG, and a 12-bit 1.1 Msps ADC with up to 13 input channels. The on-chip op amps and CTMU simplify touch and analog-front-end designs. Architecturally the part uses a 16-bit modified Harvard core with single-cycle MAC, hardware DIV, and zero-overhead looping, which yields deterministic cycle-time DSP-style signal chains. Code density is enhanced by a variable-length instruction format, and the peripheral trigger generator (PTG) coordinates complex timer-driven sequences without CPU intervention. Typical applications include industrial motor control (BLDC, PMSM, stepper), USB peripherals and Human Interface Devices, digital sensor signal conditioning, LED lighting controllers, and low-power IoT edge nodes. The wide operating temperature range (-40C to +125C) suits industrial environments, while the USB 2.0 FS OTG supports CDC, HID, MSD, and vendor-class firmware. When designing with this part, verify the VDD/VUSB rail sequencing, route the analog AVdd/AVss pins with separate ferrite isolation, and place the 28-QFN thermal pad on a continuous copper pour with at least 4 thermal vias for heat extraction. The 'T' suffix designates Tape & Reel packaging, and the 'E' suffix denotes the -40C to +125C extended industrial temperature grade. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC24EP family, and practical design notes drawn from Microchip application notes, offering an information-gain perspective not contained in the standalone datasheet.

견적 요청 문의하기
PIC24EP64GP202T-I/SS - 70 MIPS 16-bit MCU 64KB Flash | Microchip
PIC24EP64GP202T-I/SS

PIC24EP64GP202T-I/SS - 70 MIPS 16-bit MCU 64KB Flash | Microchip

The Microchip Technology PIC24EP64GP202T-I/SS is a 16-bit microcontroller built around the PIC24E high-performance core running at up to 70 MIPS (instruction execution rate), housed in a 28-pin SSOP (5.30 mm) package. The part integrates 64 KB of flash program memory (22K x 24 words), 8 KB of SRAM, and a CTMU (Charge Time Measurement Unit) plus on-chip op-amps and comparators for analog signal conditioning. The "/SS" suffix denotes the SSOP-28 package, while "I" specifies the industrial -40C to +85C operating temperature range; the trailing "T" indicates Tape and Reel packaging. Operating voltage is 3.0 V to 3.6 V from a single supply, making it suited to 3.3 V embedded designs. A 16-bit microcontroller (MCU) is a programmable logic device with a 16-bit datapath, registers, and arithmetic logic unit, falling within the broader categories of embedded controller -> microcontroller -> integrated circuit -> semiconductor. The PIC24E family sits between 8-bit PIC MCUs and 32-bit PIC32 devices in the Microchip portfolio, providing higher code density and DSP-like instructions while retaining the familiar MPLAB X toolchain and peripheral library. The PIC24EP64GP202T-I/SS belongs to the "GP" general-purpose sub-family with motor-control friendly peripherals absent and lower pin count, while the "MC" parts add high-speed PWM hardware. Key features are 1.1 Msps 10-bit or 500 ksps 12-bit configurable ADC with up to six analog inputs on 28-pin variants, three on-chip op-amps and four comparators, Peripheral Trigger Generator (PTG), and up to 21 I/O pins. The PIC24E core uses a modified Harvard architecture with a 16-bit instruction word and 24-bit instruction set extensions, supporting fractional arithmetic and DSP-style multiply instructions useful for motor control and digital filtering. Hardware-level DMA is not present on this 28-pin variant; data movement is handled by the CPU and peripherals. Typical applications include industrial sensor conditioning, low-cost motor control (BLDC, stepper) where the 70 MIPS headroom and CTMU enable capacitive touch sensing, portable instrumentation, and general-purpose 3.3 V embedded control. According to the Microchip datasheet, designers should observe the 3.0 V minimum supply and provide bulk decoupling near the VDDCORE pin to limit inrush during PLL start-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and engineering teams make informed second-source decisions.

견적 요청 문의하기
PIC24EP64GP203-E/TL - 16-Bit MCU, 64KB Flash, 36-VTLA | Microchip
PIC24EP64GP203-E/TL

PIC24EP64GP203-E/TL - 16-Bit MCU, 64KB Flash, 36-VTLA | Microchip

The Microchip Technology PIC24EP64GP203-E/TL is a 16-bit PIC24EP general-purpose microcontroller with a 60 MIPS core, 64KB (22K x 24) of program Flash, and 8KB of RAM, housed in a 36-pin VTLA (5x5 mm) package with an exposed thermal pad. The device operates from 3.0V to 3.6V and is rated for the -40C to +125C extended automotive temperature range. Per the Microchip product page, the PIC24E core delivers high-speed 70 MIPS performance with excellent code density and superior ADC performance for mixed-signal embedded designs. A 16-bit microcontroller (MCU) is a programmable processor that fetches, decodes, and executes 16-bit-wide instructions, sitting in the broader taxonomy of microcontrollers -> microcontrollers and digital signal controllers -> embedded processors -> semiconductor devices. Compared with 8-bit MCUs, 16-bit devices offer higher arithmetic throughput, larger linear address spaces, and richer peripherals; compared with 32-bit MCUs they retain a smaller code footprint and lower cost at moderate performance levels. The PIC24EP family specifically adds enhanced ADC throughput, on-chip operational amplifiers, CTMU (Charge Time Measurement Unit) touch support, and a Peripheral Trigger Generator (PTG) for hardware-level event sequencing. Key features include 64KB Flash (22K x 24 instruction words), 8KB SRAM, hardware multipliers for DSP-style operations, multiple 16-bit timers, enhanced analog peripherals (ADC, op-amps, CTMU), and communication peripherals including UART, SPI, I2C, and ECAN. The 70 MIPS core execution rate delivers deterministic real-time performance for control loops, while the 16-bit instruction set keeps code density high relative to 32-bit alternatives. Architecturally, the PIC24EP64GP203-E/TL integrates the PIC24E core with on-chip op-amps for analog front-end conditioning, a CTMU for touch or capacitive sensing, and a Peripheral Trigger Generator (PTG) that sequences peripheral actions in hardware without CPU intervention. This reduces firmware overhead for high-speed control loops and event-driven signal acquisition in medical and industrial instrumentation. Typical applications include motor control (BLDC, stepper, and servo drives), industrial automation and sensor conditioning, automotive body and chassis ECUs, medical patient monitoring and diagnostic instrumentation, IoT edge nodes with on-chip op-amp signal chains, and consumer appliance control boards. The wide operating temperature range and integrated analog make it well suited for harsh-environment designs. Design consideration: at 60 MIPS execution the device draws noticeable active current, so quiescent-current-critical designs should enable Sleep/Idle modes and gate unused peripherals. Place the decoupling network (100nF plus bulk) within 5 mm of the VDD pins to keep the on-chip op-amps and ADC free of switching noise. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design guidance not found on a single manufacturer or distributor page.

견적 요청 문의하기
PIC24EP64GP203-I/M5 - 16-bit 70 MIPS MCU 64KB Flash 36-VTLA | Microchip
PIC24EP64GP203-I/M5

PIC24EP64GP203-I/M5 - 16-bit 70 MIPS MCU 64KB Flash 36-VTLA | Microchip

The Microchip Technology PIC24EP64GP203-I/M5 is a high-performance 16-bit microcontroller from the PIC24E general-purpose family, featuring the high-speed 70 MIPS core, 64 KB of Flash program memory and 8 KB of data RAM. The part is housed in a compact 36-pin VTLA (5x5 mm) package, runs at an operating voltage of 3.0V to 3.6V, and supports an industrial temperature range of -40C to +85C as indicated by the -I suffix. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The PIC24E family sits in the dsPIC/PIC24 16-bit DSC architecture family within Microchip's broader 8/16/32-bit MCU portfolio. PIC24E devices add high-performance peripherals such as high-speed PWM, operational amplifiers, comparators, CTMU (Charge Time Measurement Unit), and the Peripheral Trigger Generator (PTG) for advanced timing and signal-conditioning tasks. The 70 MIPS core delivers excellent performance and code density for high-end general-purpose embedded applications. Key features include 64 KB (22K x 24) of Flash with self-programmability, 8 KB of RAM, a 16-bit CPU with hardware multiply/divide, three on-chip op-amps, four comparators, a 12-bit ADC with up to 16 channels (depending on variant), CTMU for touch and time measurement, and the Peripheral Trigger Generator. The 36-VTLA package has only 5x5 mm board area, ideal for space-constrained designs. Industrial-grade -40C to +85C operation, plus rich connectivity including I2C, SPI, UART, and high-speed PWM make it suitable for motor control and digital power conversion. Typical applications include digital power conversion (PFC, LLC, full-bridge converters), high-performance motor control (sensorless FOC, BLDC/PMSM drives), advanced sensor conditioning (using the on-chip op-amps, CTMU, and comparators), industrial control and automation, and LED lighting controllers. The CTMU enables cost-effective capacitive touch interfaces, and the PTG allows autonomous peripheral sequencing without CPU intervention for deterministic timing in safety-relevant loops. When designing with this part, follow Microchip's recommended decoupling scheme: a 100 nF low-ESR ceramic placed within 2 mm of each power pair, plus a bulk 4.7-10 uF tantalum or ceramic on the main supply. Use Microchip's MPLAB X IDE and MPLAB XC16 compiler for firmware development; pick ICD 3 or PICkit 4 for in-circuit programming and debugging.

견적 요청 문의하기
PIC24EP64GP203-I/TL - 16-bit 70MIPS MCU 64KB Flash 36-VTLA | Microchip
PIC24EP64GP203-I/TL

PIC24EP64GP203-I/TL - 16-bit 70MIPS MCU 64KB Flash 36-VTLA | Microchip

The Microchip Technology PIC24EP64GP203-I/TL is a 16-bit microcontroller from the PIC® 24EP general-purpose family, delivering 70 MIPS core performance with 64 KB of Flash program memory and 4 KB of RAM in a 36-pin VTLA (5x5 mm) package with exposed pad. It operates from a 3.0 V to 3.6 V single supply and integrates advanced analog features including operational amplifiers, a Charge Time Measurement Unit (CTMU), a 10-bit ADC, and a Peripheral Trigger Generator (PTG) for hardware-based timing and sequencing without CPU intervention. A 16-bit PIC microcontroller is a member of the microcontroller (MCU) product category — specifically a Harvard-architecture MCU with a modified instruction set optimized for deterministic real-time control. In the system hierarchy, the PIC24EP sits between 8-bit PIC MCUs (PIC16/PIC18) and 32-bit ARM Cortex-M parts, offering significantly higher code density and DSP capability while preserving deterministic interrupt latency. It belongs to the broader class of digital signal controllers (DSCs) and is widely used where 8-bit MCUs are too slow but 32-bit Cortex-M parts are over-specified for cost-sensitive designs. Key features include a 70 MIPS (max) CPU core, dual 10-bit/12-bit ADC options, internal temperature sensor, up to 25 mA source/sink on I/O, JTAG/ICSP debug, and a Peripheral Trigger Generator that coordinates peripherals autonomously. The PTG is a hardware state machine that sequences ADC sampling, PWM updates, and CTMU timing operations with zero software overhead, enabling deterministic sub-microsecond response for power-conversion and motor-control loops. Architecturally, the PIC24EP uses a 16-bit modified Harvard core with separate program and data buses. Flash memory is accessed through a 24-bit-wide instruction path supporting 22K × 24 program word addressing, yielding the 64 KB program memory. A 4 KB RAM area is dual-ported to the CPU and DMA engine; a single-cycle MAC instruction enables DSP-class digital filtering with deterministic timing for power conversion loops. Typical applications include industrial motor control (BLDC/PMSM sensorless FOC), digital power conversion (digitally controlled SMPS with PTG-driven ADC/PWM synchronization), LED lighting controllers, battery management systems (BMS), USB device peripherals with the on-chip USB 2.0 Full-Speed transceiver, and medical instrumentation such as portable patient monitors. When designing with this MCU, note that the VTLA-36 (5 × 5 mm) package requires careful PCB layout to maximize the exposed-pad ground connection for thermal dissipation (continuous GPIO sink current up to 25 mA creates localized heating under high-load conditions). Use the Peripheral Trigger Generator to offload real-time sequencing from the CPU, and ensure VDD decoupling includes 100 nF ceramic capacitors placed within 5 mm of each power pin plus a bulk 4.7 µF tantalum or polymer cap on VDD. This page synthesizes distributor stock, drop-in replacements within the same VTLA-36 footprint, and practical design notes (PTG use cases, ADC calibration, decoupling topology) that go beyond what the manufacturer datasheet provides — useful for procurement engineers and embedded firmware developers evaluating PIC24EP family selections.

견적 요청 문의하기
PIC24EP64GP203T-I/TL - 16-bit MCU 64KB Flash 36VTLA | Microchip
PIC24EP64GP203T-I/TL

PIC24EP64GP203T-I/TL - 16-bit MCU 64KB Flash 36VTLA | Microchip

The Microchip PIC24EP64GP203T-I/TL is a 16-bit microcontroller from the PIC24EP general-purpose MCU family, featuring a 70 MIPS high-performance core and 64KB of Flash program storage with 8KB of RAM. It is housed in a 36-pin VTLA (Very Thin Leadless Array) surface-mount package with an exposed thermal pad, making it suitable for compact, thermally-constrained designs in industrial and consumer applications. What is a PIC24EP general-purpose MCU? The PIC24E/PIC24EP family is Microchip's 16-bit DSC/MCU line that sits between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX families in the broader Microchip microcontroller hierarchy (8-bit MCU -> 16-bit MCU -> 32-bit MCU -> microcontroller -> embedded controller). PIC24EP devices integrate signal-chain analog peripherals such as operational amplifiers, comparators, and CTMU (Charge Time Measurement Unit) directly on-chip, which historically required external components on simpler MCUs. This integration makes PIC24EP parts well-suited for closed-loop control and mixed-signal sensing tasks. Key differentiating specifications include: 70 MIPS core performance from a 60 MHz (max) CPU with DSP instructions; up to three on-chip operational amplifiers; up to four high-speed comparators with a 10-bit Peripheral Trigger Generator (PTG); and the CTMU peripheral for capacitive touch and time-of-flight measurement. The on-chip op amps and comparators eliminate the need for external analog front-end ICs in many motor-control and power-conversion designs, reducing BOM count and PCB complexity. Architecturally, the PIC24EP64GP203T-I/TL uses a modified Harvard architecture with separate program Flash and data RAM buses, enabling simultaneous instruction fetch and data access. The device operates from a 3.0V to 3.6V single supply, with 5V-tolerant digital I/O for mixed-voltage interfaces, and integrates a 10/12-bit ADC with up to 1.1 Msps conversion rate for high-speed analog acquisition. Typical applications include industrial motor control (BLDC, PMSM, and stepper drives), digital power conversion (DC-DC converters and PFC stages), capacitive touch sensing human-machine interfaces (HMIs), LED lighting drivers, and general-purpose embedded control in appliances and consumer products. The exposed thermal pad of the VTLA-36 package supports sustained DSP compute loads without thermal throttling. When designing with this device, ensure the VTLA-36 PCB footprint includes adequate thermal vias under the exposed pad to keep junction temperature within the -40C to +85C industrial operating range. Programming and debugging are supported via the standard 4-wire ICSP interface, and the MPLAB X IDE with the MPLAB XC16/Code Compiler provides a complete firmware development toolchain. This page synthesizes distributor pricing, drop-in same-package alternatives, application context, and design guidance into a single engineering reference not available on the manufacturer datasheet.

견적 요청 문의하기
PIC24EP64GP204-E/ML - 16-Bit 60 MIPS 64KB Flash MCU | Microchip
PIC24EP64GP204-E/ML

PIC24EP64GP204-E/ML - 16-Bit 60 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64GP204-E/ML is a 16-bit PIC24EP general-purpose microcontroller featuring a high-performance 60 MIPS CPU core, 64 KB of Flash program memory, and 8 KB of RAM, housed in a 44-pin QFN (ML) 8x8 mm package. It operates from a 3.0 V to 3.6 V supply, integrates an enhanced ADC, op amps, CTMU, and Peripheral Trigger Generator (PTG), and exposes 35 general-purpose I/O pins across the 44-QFN land pattern. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a configurable set of peripherals such as ADC, timers, communication interfaces (UART, SPI, I2C), and GPIO into one package. Within the broader system hierarchy, the PIC24EP64GP204 belongs to the 16-bit microcontroller class -> DSP-capable MCU -> embedded controller -> semiconductor IC, and within Microchip's portfolio to the PIC24E "high-performance, general-purpose" family. The 16-bit data path plus 70 MHz internal oscillator allows deterministic real-time control loops that 8-bit MCUs cannot economically deliver. Key differentiating features include the dsPIC33/PIC24E enhanced Harvard architecture with hardware multiply/divide, a 10-bit 1.1 Msps ADC with up to 32 channels, four on-chip operational amplifiers for analog front-end conditioning, the CTMU for capacitive-touch and time-based measurement, the Peripheral Trigger Generator (PTG) for offloading CPU-paced event sequencing, and a parallel master port for external bus expansion. The 44-QFN package exposes a generous 35 GPIO budget despite the small 8x8 mm footprint, enabling space-constrained industrial boards. From an architecture perspective, the device uses a 2-cycle hardware multiplier and zero-overhead loop control, giving effective C-code density close to 70 MIPS throughput. The PTG and CTMU in particular let firmware replace external analog/digital timing chips - a board-level cost and BOM reduction. Industrial-grade -40C to +125C operation makes it usable in motor control, lighting, and sensor-hub designs that 8-bit PIC16/PIC18 parts cannot address. Typical applications include industrial motor control (BLDC and PMSM), digital lighting and LED drivers, sensor-reading and pose-location hub designs, capacitive-touch human-machine interfaces, and consumer appliances. The combination of on-chip op amps and CTMU is especially attractive in products that must minimize external analog components while maintaining analog accuracy. When laying out the PCB, allocate at least one solid ground plane beneath the exposed thermal pad of the 44-QFN and stitch it to the system ground with a 4- to 6-via array - thermal dissipation and EMI performance both depend on the EP being well-bonded. Always program the configuration bits for the correct oscillator mode before debugging, or the device will appear dead. This page synthesizes XAIPART distributor comparison data, same-family PIC24EP drop-in alternatives, and practical QFN-layout design notes not found in the standalone manufacturer datasheet.

견적 요청 문의하기
PIC24EP64GP204-E/PT - 16-bit 70 MIPS MCU, 64KB Flash, 44-TQFP | Microchip
PIC24EP64GP204-E/PT

PIC24EP64GP204-E/PT - 16-bit 70 MIPS MCU, 64KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC24EP64GP204-E/PT is a high-performance 16-bit microcontroller from the PIC24EP family, delivering up to 70 MIPS throughput from a 60 MHz CPU core, packaged in a 44-pin TQFP (10x10 mm). It integrates 64 KB of flash program memory (22K x 24 words), 8 KB of SRAM, and a rich analog/digital peripheral set including three on-chip operational amplifiers, four comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG) for hardware-level state machine sequencing. A 16-bit MCU is a microcontroller whose data path, registers, and ALU are 16 bits wide. Compared with 8-bit MCUs (e.g., PIC16, 8051), a 16-bit core performs arithmetic on 16-bit operands in a single instruction and can address larger memory spaces directly, while still consuming less power and offering simpler deterministic interrupt handling than 32-bit Cortex-M cores. The PIC24EP family sits in the middle of Microchip's portfolio between the 8-bit PIC18 and the 32-bit PIC32MX/MZ lines, targeting high-end general-purpose embedded designs that need strong DSP-like performance and large peripheral integration on a single die. Key features include a 10/12-bit ADC with up to 1.1 Msps conversion, two UART/SPI/I2C-configurable serial interfaces, three 16-bit timers, five 16-bit capture/compare/PWM channels, and an extended -40C to +125C operating range (the trailing -E in the part number denotes the extended temperature grade). The 70 MIPS performance, combined with a 16-bit modified Harvard bus and DSP engine for single-cycle 16x16 MAC operations, enables digital signal conditioning, motor control loops, and audio processing in software without an external DSP. The architecture combines a 16-bit modified Harvard CPU with tightly-coupled analog peripherals, including three operational amplifiers that can be configured as unity-gain buffers or as gain stages driving the on-chip ADC. The PTG (Peripheral Trigger Generator) is a hardware sequencer that chains ADC, PWM, and timer events at hardware speed, offloading work from the CPU and enabling deterministic sub-microsecond response times critical for power-conversion and motor-control loops. Typical applications include industrial motor control, switch-mode power supplies with digital compensation, sensor signal conditioning, LED lighting controllers, and consumer devices requiring 16-bit DSP performance without the cost of a 32-bit MCU. The extended temperature grade makes the part suitable for under-hood automotive subsystems, industrial automation, and outdoor equipment. When designing with this MCU, reserve adequate PCB area for the 44-pin TQFP exposed thermal pad layout, and confirm that the ADC reference voltage source can drive the 3 internal op amps plus ADC sample capacitance in worst-case back-to-back burst conversions. For new designs, consider the pin-compatible PIC24EP512GP204-E/PTI (512 KB flash) as a drop-in upgrade path for code growth. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP64GP204-E/TL - 16-bit MCU, 64KB Flash, 60MHz, VFTLA-44 | Microchip
PIC24EP64GP204-E/TL

PIC24EP64GP204-E/TL - 16-bit MCU, 64KB Flash, 60MHz, VFTLA-44 | Microchip

The Microchip PIC24EP64GP204-E/TL is a 16-bit microcontroller from the PIC24EP general purpose MCU family, featuring a high-performance 70 MIPS core with 64 KB of Flash program memory and 8 KB of RAM, housed in a 44-pin VFTLA (VTLA-44) surface-mount package with an exposed thermal pad. It operates from a 3.0V to 3.6V supply at industrial-grade -40C to +125C temperatures and is qualified to the AEC-Q100 automotive standard. A 16-bit microcontroller (MCU) is a programmable embedded processor with a 16-bit data path, sitting in the hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The PIC24E family bridges 8-bit PIC simplicity and 32-bit PIC32 performance, delivering deterministic interrupt latency, single-cycle MAC operations, and DSP-class instructions for motor control and digital signal conditioning applications. Key features include a 60 MHz / 70 MIPS CPU, dual 10-bit ADCs with up to 1.1 Msps conversion rate, up to 83 I/O pins, an integrated CTMU (Charge Time Measurement Unit) for capacitive touch, internal op-amps, and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing without CPU intervention. Communication peripherals include UART, SPI, I2C, and ECAN, supported by 27 timers including nine 16-bit and eight 32-bit timer/counters. Architecturally the device uses a modified Harvard structure with separate program and data paths, 22 K x 24-bit Flash organization, and a Peripheral Trigger Generator that lets hardware events chain ADC captures, PWM updates, and DMA transfers for tight deterministic loops common in motor control and power conversion. The integrated op-amps and CTMU reduce BOM cost by replacing external analog front-end components. Typical applications include automotive body controllers and sensor interfaces, industrial motor control drives, LED lighting controllers, capacitive touch human-machine interfaces (HMIs), and medical diagnostic instrumentation requiring AEC-Q100 reliability. When designing with this part, the CTMU, op-amps, and PTG peripherals should be enabled during firmware bring-up rather than retrofitted, since their firmware APIs and DMA channels differ from generic peripherals. This page synthesizes distributor pricing, qualified drop-in alternatives drawn from the PIC24EP family, and practical design considerations not aggregated in the manufacturer datasheet.

견적 요청 문의하기
PIC24EP64GP204-I/MV - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip
PIC24EP64GP204-I/MV

PIC24EP64GP204-I/MV - 16-Bit 70 MIPS MCU, 64KB Flash | Microchip

The Microchip Technology PIC24EP64GP204-I/MV is a 16-bit PIC24EP general-purpose microcontroller (MCU) executing up to 70 MIPS from a 70 MHz CPU clock, equipped with 64 KB (22K x 24) of Flash program memory and 8 KB of SRAM, housed in a 48-pin UQFN (MV) 6x6 mm package with an exposed thermal pad. It is built on the PIC24E enhanced core architecture and integrates on-chip peripherals including a 10/12-bit ADC, three op-amps, four comparators, a Charge Time Measurement Unit (CTMU), and a Peripheral Trigger Generator (PTG), reducing external analog bill-of-materials in mixed-signal designs. According to the Microchip product brief, the PIC24E family targets high-end general-purpose applications where high-speed DSP-style performance and code density are required. What is a PIC24E microcontroller? The PIC24E is Microchip's 16-bit modified Harvard MCU family positioned between the 8-bit PIC18 and the 32-bit PIC32 lines. It uses a 24-bit instruction word with 16-bit data paths, hardware Multiply-Accumulate and DSP instructions, and a Peripheral Trigger Generator (PTG) that lets peripherals trigger one another without CPU intervention. In the broader taxonomy, PIC24E belongs to: MCU -> 16-bit MCU -> PIC24 family -> PIC24E sub-family -> DSC (Digital Signal Controller) class of semiconductor devices. Key features include 64 KB self-programmable Flash with live update, 8 KB SRAM, an integrated 32 kHz to 16 MHz crystal oscillator with PLL, USB 2.0 full-speed On-The-Go (OTG) peripheral, four UART modules, two SPI ports, two I2C ports, two CAN 2.0B modules, and a 16-bit Parallel Master Port (PMP) for external memory or graphics interfaces. The device operates from 3.0 V to 3.6 V and supports the industrial -40C to +85C temperature range indicated by the -I suffix. Architecturally, the PIC24EP64GP204 combines an enhanced Harvard bus, single-cycle MAC for DSP operations, and zero-overhead hardware loops, making it suitable for closed-loop control and digital filter tasks that would otherwise strain an 8-bit core. The PTG peripheral can chain ADC-to-DAC, PWM, and interrupt events deterministically, offloading the CPU. Typical applications include industrial motor control, sensor signal conditioning using the on-chip op-amps, LED lighting controllers, building automation, medical instrumentation front-ends, USB peripherals, and CAN node endpoints in automotive and industrial networks. The integrated op-amps and comparators allow direct interfacing with thermocouples, photodiodes, and current-sense shunts. When designing with this part, observe the 3.0 V to 3.6 V single-rail supply requirement; decoupling requires 10 uF bulk plus 0.1 uF ceramic per VDD/VSS pair. The UQFN package mandates a thermal pad soldered to a continuous ground plane for thermal and electrical performance. For programming, the device uses the standard ICSP 4-wire interface and supports MPLAB X IDE with the XC16 compiler.

견적 요청 문의하기
PIC24EP64GP204-I/PT - 16-bit 70 MIPS 64KB Flash MCU | Microchip
PIC24EP64GP204-I/PT

PIC24EP64GP204-I/PT - 16-bit 70 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64GP204-I/PT is a 16-bit PIC24E general-purpose microcontroller (MCU) delivering 70 MIPS performance from a modified Harvard architecture core, packaged in a 44-pin TQFP (10x10 mm) with 64 KB of Flash program memory and 8 KB of SRAM. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and a rich set of peripherals (ADC, timers, I/O, communications). It belongs to the embedded-computing taxonomy: MCU -> microcontroller -> embedded processor -> semiconductor IC. The PIC24E family adds a 16-bit data path, DSP extensions, and an enhanced instruction set that delivers ~1.5 DMIPS/MHz - ideal for mixed signal-chain control where 8-bit MCUs run out of headroom but a full DSP is unnecessary. Key features of the PIC24EP64GP204 include: 70 MIPS (max CPU speed at 70 MHz with 2-cycle instruction execution), 64 KB Flash organized as 22K x 24 instruction words, 8 KB SRAM data memory, up to 35 I/O pins, an integrated 10-bit/12-bit ADC, three op-amps, a Charge Time Measurement Unit (CTMU), a Peripheral Trigger Generator (PTG), and multiple communication peripherals (UART, SPI, I2C). The device operates from 3.0 V to 3.6 V across the -40C to +85C industrial temperature range. Architecturally, the PIC24E core uses a 16-bit data path with a 24-bit instruction word, single-cycle MAC for DSP operations, and a hardware multiply/divide unit. The integrated op-amps and CTMU simplify analog front-ends for sensor conditioning and capacitive touch, while the PTG offloads deterministic peripheral sequencing from the CPU, freeing cycles for application logic. Typical applications include industrial motor control, sensor signal conditioning with on-chip op-amps, capacitive touch HMI, closed-loop PID control for power conversion, USB device-class bridges, and general-purpose embedded control where DSP throughput is occasionally needed. When designing with this part, note that the 3.3 V supply rail is shared by both analog and digital domains - a ferrite bead + decoupling-cap split is recommended to isolate the ADC reference. Programming/debug is via the standard ICSP interface (PGECx/PGEDx pins), so these pins must be reserved on the PCB. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24E family, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24EP64GP204-I/TL - 16-bit MCU 64KB Flash 70 MIPS | Microchip
PIC24EP64GP204-I/TL

PIC24EP64GP204-I/TL - 16-bit MCU 64KB Flash 70 MIPS | Microchip

The Microchip Technology PIC24EP64GP204-I/TL is a 16-bit microcontroller from the PIC24EP general-purpose family, featuring a high-speed 70 MIPS core, 64 KB of Flash program memory, and 8 KB of RAM. It is supplied in a 44-pin VTLA surface-mount package with an exposed thermal pad and operates from a 3.0 V to 3.6 V single supply. The integrated core delivers 70 MIPS performance and is supported by 16-bit modified Harvard architecture with DSP extensions for efficient signal-processing code. A PIC microcontroller (Programmable Interface Controller) is a compact, low-power embedded processor that integrates CPU, Flash, RAM, and peripherals into one IC. PIC24EP devices sit in the 16-bit DSC (Digital Signal Controller) tier of Microchip's portfolio, slotting between 8-bit PIC18 and 32-bit PIC32MX/SAM families. They target applications requiring deterministic real-time control with DSP throughput, while retaining the familiar MPLAB X toolchain and PIC peripheral set used across Microchip's ecosystem. Key features of the PIC24EP64GP204-I/TL include 16-bit timers, a 10/12-bit ADC with up to 16 channels and high-speed conversion, multiple UART/SPI/I2C interfaces, PWM outputs suitable for motor and power control, and enhanced peripherals such as CTMU (Charge Time Measurement Unit) for touch and capacitive sensing. The 70 MIPS core delivers roughly 2x the performance of PIC24F devices at the same clock rate, while advanced peripherals like the Peripheral Trigger Generator (PTG) allow chained, low-latency hardware events without CPU intervention. Architecturally, the device uses a modified Harvard bus with separate program and data paths and a 24-bit instruction word with DSP-aware addressing modes. Internal op amps (on selected variants) and comparators reduce external analog component count, and the CTMU enables precise time-of-flight measurements for proximity, flow, or temperature sensing. Typical applications include industrial control, motor drives, power conversion, sensor interfacing, and general-purpose embedded systems. The PIC24EP family is well-suited for digital power, lighting control, medical instrumentation, and any embedded design that benefits from the PIC ecosystem. When laying out the PCB, connect the exposed thermal pad to a continuous ground plane, follow the recommended decoupling (0.1 µF ceramic near each VDD pin plus a bulk capacitor), and use MPLAB X IDE with the XC16 compiler for code development. This page consolidates distributor pricing, pin-compatible PIC24EP family variants, and practical design notes not always collected in a single datasheet reference, helping engineers quickly evaluate the part for new designs and reuses.

견적 요청 문의하기
PIC24EP64GP204T-I/MV - 16-bit 70 MIPS MCU, 64KB Flash | Microchip
PIC24EP64GP204T-I/MV

PIC24EP64GP204T-I/MV - 16-bit 70 MIPS MCU, 64KB Flash | Microchip

The Microchip PIC24EP64GP204T-I/MV is a 16-bit PIC24EP-family microcontroller running at up to 70 MIPS, integrating 64 KB (22K x 24) of Flash program memory and 8 KB of on-chip RAM in a 48-pin UQFN (MV) 6x6 mm package with an exposed thermal pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals (ADC, timers, communication interfaces, I/O) into one device. Within the broader semiconductor taxonomy, MCUs belong to the microcontrollers and digital signal controllers category, sitting under the Integrated Circuits family. The PIC24EP family further specializes in high-performance 16-bit control with DSP-like instructions, advanced analog peripherals (12-bit ADC, op amps, CTMU), and the Peripheral Trigger Generator (PTG) for hardware-state-machine automation. Key features include a 70 MIPS core at 70 MHz CPU clock, 64 KB self-programmable Flash, 8 KB SRAM, integrated op amps and CTMU for touch and sensor signal conditioning, a 12-bit ADC with up to 1.1 Msps, USB, UART, SPI, I2C, and CAN peripherals. The MV package measures 6x6 mm with an exposed pad that must be soldered to a ground pour for thermal dissipation and electrical performance. The architecture uses a 16-bit modified-Harvard CPU with DSP instructions, dual-bus Flash and SRAM, and dedicated peripheral engines. The combination of high CPU throughput, integrated analog front-end blocks, and the PTG makes this MCU suitable for closed-loop control, sensor fusion, and motor-control pre-processing on a single device, eliminating external analog components. Typical applications include industrial sensor signal conditioning, BLDC and PMSM motor control, LED lighting controllers, USB-enabled embedded devices, and human-machine interface (HMI) front-ends. The wide operating temperature range and on-chip op amps reduce external component count in analog-heavy designs. When designing with this part, allocate a continuous ground copper pour under the exposed pad and stitch vias to inner ground planes. Ensure MCLR is tied to Vdd through the proper configuration circuit, and follow Microchip's MPLAB X IDE and XC16 compiler toolchain for code development. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical PCB design notes not found in the manufacturer datasheet alone, giving engineers a faster path from concept to prototype.

견적 요청 문의하기
PIC24EP64GP206-E/MR - 16-bit 70MIPS 64KB Flash MCU | Microchip
PIC24EP64GP206-E/MR

PIC24EP64GP206-E/MR - 16-bit 70MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64GP206-E/MR is a 16-bit general-purpose microcontroller from the PIC24E dsPIC architecture, featuring the high-performance 70 MIPS core, 64 KB (22K x 24) of Flash program memory, and 8 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with an extended -40C to +125C operating temperature grade (E suffix). It integrates 16-bit PWM, USB, advanced analog peripherals, and the Peripheral Trigger Generator (PTG) for high-end general-purpose applications. A 16-bit microcontroller (MCU) is a single-chip computer that processes data in 16-bit words, providing substantially more computational headroom and signal-processing capability than 8-bit cores while remaining cost-effective for embedded control. In the broader taxonomy, the PIC24EP sits between 8-bit PIC microcontrollers and 32-bit ARM Cortex-M parts, offering deterministic interrupt response, DSP-friendly instruction set, and a rich peripheral mix suitable for motor control, power conversion, and sensor fusion. The dsPIC/PIC24E core is classified as a digital signal controller (DSC) - bridging MCU and DSP domains within the semiconductor hierarchy. Key features include 16-bit ADC performance with up to 12-bit resolution at high conversion rates, the Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, integrated operational amplifiers for analog front-end conditioning, nine 16-bit timers plus additional capture/compare resources, and the PTG peripheral for autonomous sequencing of peripherals without CPU intervention. The device operates from a 3.0 V to 3.6 V supply. The architecture combines Harvard-bus separation of program and data memory with a multi-stage pipeline, enabling deterministic execution at 70 MIPS while preserving C-language code efficiency. The integrated op-amps, comparators, and 12-bit ADC provide a complete analog front-end, eliminating many external active components in mixed-signal designs. The VQFN-64 package (9x9 mm) supports surface-mount manufacturing and volume control thermal dissipation via the exposed pad. Typical applications include industrial motor control (BLDC/PMSM FOC drives), digital power conversion (SMPS, PFC stages), USB peripherals and embedded host devices, multi-loop process control, and capacitive-touch human-machine interfaces. The combination of CTMU, op-amps, and high-resolution PWM also makes it well-suited for LED lighting controllers and solar micro-inverters. When designing with this device, allocate the bottom-side exposed pad (EP) of the VQFN-64 to a contiguous ground copper pour with multiple thermal vias to meet the 1 W package dissipation rating. Decouple each VDD/VSS pair with a 100 nF X7R capacitor placed within 3 mm of the pin, and add a bulk 4.7 uF tantalum or polymer capacitor near the package. The PTG can offload timing-critical peripheral sequences from the CPU, freeing cycles for application logic. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes that go beyond the manufacturer datasheet, including parametric drop-in guidance for procurement teams.

견적 요청 문의하기
PIC24EP64GP206-E/PT - 16-Bit 60 MIPS MCU, 64KB Flash, TQFP-64 | Microchip
PIC24EP64GP206-E/PT

PIC24EP64GP206-E/PT - 16-Bit 60 MIPS MCU, 64KB Flash, TQFP-64 | Microchip

The Microchip Technology PIC24EP64GP206-E/PT is a 16-bit microcontroller from the PIC24EP general-purpose family, delivering up to 70 MIPS core performance, with 64KB (22K x 24) of Flash program memory and 8KB RAM, housed in a 64-pin TQFP (PT) 10x10 mm package. The PIC24E core combines high CPU throughput with deterministic interrupt response and excellent code density, targeting high-end general-purpose applications that require advanced analog and digital peripherals. The device operates from a 3.0V to 3.6V supply and supports an extended -40C to +125C industrial temperature range (the 'E' suffix indicates the extended temperature grade). A 16-bit microcontroller (microcontroller unit, MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals such as timers, communication interfaces, and analog blocks. PIC24EP MCUs occupy the mid-range of Microchip's 16-bit portfolio - higher performance than the PIC24F 'F' devices, with DSP extensions and faster ADC sampling, yet more cost-effective than the dsPIC33 motor-control/power-conversion DSCs. They sit in the broader hierarchy: MCU -> 16-bit MCU -> enhanced-performance MCU -> embedded controller. Key features of the PIC24EP64GP206 include up to 53 general-purpose I/O pins, an internal 8-channel DMA, three internal analog comparators, three internal operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, a Peripheral Trigger Generator (PTG) for hardware-state-machine-style peripheral sequencing, and a high-speed PWM with duty-cycle resolution suited for digital power conversion. Up to nine 16-bit timers and three 32-bit timer/counters are available, plus a real-time clock/calendar. Architecturally, the device integrates a Harvard-bus 16-bit RISC core with DSP extensions, hardware multiply/divide, and a 24-bit instruction word. Its advanced analog subsystem includes a 10/12-bit ADC (with up to 500 ksps conversion rate) and dual comparators with programmable reference, allowing closed-loop mixed-signal control on-chip without external amplifiers. Typical applications include industrial motor control, digital power conversion (PFC, LLC, phase-shifted full-bridge), LED lighting drivers, uninterruptible power supplies (UPS), solar inverters, advanced sensor signal-conditioning, and white-goods/automotive body-electronics modules. The PTG peripheral is particularly useful for offloading time-critical peripheral handshakes from the CPU in high-frequency SMPS designs. When designing with this device, allocate adequate decoupling (100 nF ceramic close to every VDD/VSS pair plus a bulk 10 uF) and follow Microchip's recommended 4-layer PCB stack-up for the TQFP-64 to maintain signal integrity on the high-speed PWM outputs. Programming/debugging is supported through the 2-wire ICSP interface, and the device is fully supported by MPLAB X IDE, XC16 compiler, and Microchip's Code Configurator (MCC). This page synthesizes distributor pricing, automotive-grade (-I/-E temperature) variants, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - specifically the cross-reference mapping between the GP and MC families that share the same 64-pin TQFP footprint.

견적 요청 문의하기