PIC24EP64GP206-E/PT - 16-Bit 60 MIPS MCU, 64KB Flash, TQFP-64 | Microchip
부품 번호: PIC24EP64GP206-E/PT ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $5.32 | $5.32 |
| 10 | $4.85 | $48.50 |
| 100 | $4.18 | $418.00 |
| 500 | $3.62 | $1,810.00 |
| 1,000 | $3.15 | $3,150.00 |
PIC24EP64GP206-E/PT 개요
A 16-bit microcontroller (microcontroller unit, MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and a rich set of on-chip peripherals such as timers, communication interfaces, and analog blocks. PIC24EP MCUs occupy the mid-range of Microchip's 16-bit portfolio - higher performance than the PIC24F 'F' devices, with DSP extensions and faster ADC sampling, yet more cost-effective than the dsPIC33 motor-control/power-conversion DSCs. They sit in the broader hierarchy: MCU -> 16-bit MCU -> enhanced-performance MCU -> embedded controller.
Key features of the PIC24EP64GP206 include up to 53 general-purpose I/O pins, an internal 8-channel DMA, three internal analog comparators, three internal operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise time measurement, a Peripheral Trigger Generator (PTG) for hardware-state-machine-style peripheral sequencing, and a high-speed PWM with duty-cycle resolution suited for digital power conversion. Up to nine 16-bit timers and three 32-bit timer/counters are available, plus a real-time clock/calendar.
Architecturally, the device integrates a Harvard-bus 16-bit RISC core with DSP extensions, hardware multiply/divide, and a 24-bit instruction word. Its advanced analog subsystem includes a 10/12-bit ADC (with up to 500 ksps conversion rate) and dual comparators with programmable reference, allowing closed-loop mixed-signal control on-chip without external amplifiers.
Typical applications include industrial motor control, digital power conversion (PFC, LLC, phase-shifted full-bridge), LED lighting drivers, uninterruptible power supplies (UPS), solar inverters, advanced sensor signal-conditioning, and white-goods/automotive body-electronics modules. The PTG peripheral is particularly useful for offloading time-critical peripheral handshakes from the CPU in high-frequency SMPS designs.
When designing with this device, allocate adequate decoupling (100 nF ceramic close to every VDD/VSS pair plus a bulk 10 uF) and follow Microchip's recommended 4-layer PCB stack-up for the TQFP-64 to maintain signal integrity on the high-speed PWM outputs. Programming/debugging is supported through the 2-wire ICSP interface, and the device is fully supported by MPLAB X IDE, XC16 compiler, and Microchip's Code Configurator (MCC).
This page synthesizes distributor pricing, automotive-grade (-I/-E temperature) variants, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - specifically the cross-reference mapping between the GP and MC families that share the same 64-pin TQFP footprint.
드롭인 대체품: PIC24EP64GP206-E/PT — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24EP64GP206-E/PT (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Package, Core Architecture, Maximum CPU Speed, Operating Temperature.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24EP512GP206-E/PT
✅ 드롭인✓ 재고 있음
$9.48 / 개
데이터시트 보기 →PIC24EP256GP206-E/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24EP64MC206-E/PT
✅ 드롭인✓ 재고 있음
$5.71 / 개
데이터시트 보기 →PIC24EP64GP206-I/PT
✅ 드롭인✓ 재고 있음
$3.8 / 개
데이터시트 보기 →PIC24EP512GP206-I/PT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
PIC24EP256MC206-E/PT
✅ 드롭인✓ 재고 있음
$6.55 / 개
데이터시트 보기 →PIC24EP64GP206-E/PT 최대 정격 & 전기적 특성
| Core Architecture | PIC24E (16-bit RISC with DSP extensions) |
| Core Performance | 70 MIPS (60 MHz max CPU clock) |
| Program Memory (Flash) | 64KB (22K x 24 instruction words) |
| Data Memory (RAM) | 8KB (4K x 16) |
| Operating Voltage | 3.0V to 3.6V |
| Temperature Grade | Extended -40C to +125C (E suffix) |
| Number of I/O Pins | 53 (max) |
| 패키지 | 64-pin TQFP (PT) 10x10 mm, 1.10 mm height |
| 실장 유형 | Surface Mount |
| Timers | 9 x 16-bit + 3 x 32-bit timer/counters (per family datasheet) |
| Internal Op Amps | 3 |
| Analog Comparators | 3 (with programmable reference) |
| ADC | 10/12-bit, up to 500 ksps (per family datasheet) |
| DMA | 8-channel |
| CTMU | Yes (Charge Time Measurement Unit) |
| PTG | Yes (Peripheral Trigger Generator) |
| RoHS 상태 | Compliant |
| MSL 레벨 | 3 (per JEDEC J-STD-020, manufacturer typical) |
| Lead-Free | Yes (per datasheet ordering code) |
PIC24EP64GP206-E/PT 핀 구성
| 핀 1 | RP5/RB5 — Remappable peripheral pin / general I/O port B bit 5 |
| 핀 2 | RP6/RB6 — Remappable peripheral pin / general I/O port B bit 6 |
| 핀 3 | RP7/RB7 — Remappable peripheral pin / general I/O port B bit 7 |
| 핀 4 | RP8/RB8 — Remappable peripheral pin / general I/O port B bit 8 |
| 핀 5 | RP9/RB9 — Remappable peripheral pin / general I/O port B bit 9 |
| 핀 6 | VSS — Ground reference |
| 핀 7 | VDD — Positive supply (3.0V to 3.6V) |
| 핀 8 | RP10/RB10 — Remappable peripheral pin / general I/O port B bit 10 |
| 핀 9 | RP11/RB11 — Remappable peripheral pin / general I/O port B bit 11 |
| 핀 10 | RP12/RB12 — Remappable peripheral pin / general I/O port B bit 12 |
| 핀 11 | RP13/RB13 — Remappable peripheral pin / general I/O port B bit 13 |
| 핀 12 | RP14/RB14 — Remappable peripheral pin / general I/O port B bit 14 |
| 핀 13 | OSCI/RC12 — Oscillator crystal input / general I/O |
| 핀 14 | OSCO/RC15 — Oscillator crystal output / general I/O |
| 핀 15 | SOSCI/RP0/RC0 — Secondary oscillator crystal input / remappable peripheral / general I/O |
| 핀 16 | SOSCO/RP1/RC1 — Secondary oscillator crystal output / remappable peripheral / general I/O |
| 핀 17 | RP2/RC2 — Remappable peripheral / general I/O |
| 핀 18 | RP3/RC3 — Remappable peripheral / general I/O |
| 핀 19 | RP4/RC4 — Remappable peripheral / general I/O |
| 핀 20 | VDD — Positive supply (3.0V to 3.6V) |
| 핀 21 | VSS — Ground reference |
| 핀 22 | AN15/RP15/CN15/RB15 — Analog input 15 / remappable peripheral / change notification / general I/O |
| 핀 23 | AN14/RP14/CN14/RB14 — Analog input 14 / remappable peripheral / change notification / general I/O |
| 핀 24 | AN13/RP13/CN13/RB13 — Analog input 13 / remappable peripheral / change notification / general I/O |
| 핀 25 | AN12/RP12/CN12/RB12 — Analog input 12 / remappable peripheral / change notification / general I/O |
| 핀 26 | AN11/CN11/RB11 — Analog input 11 / change notification / general I/O |
| 핀 27 | AN10/CVBAR/CN10/RB10 — Analog input 10 / CV reference / change notification / general I/O |
| 핀 28 | VDDCORE — Digital core voltage (regulated internally) |
| 핀 29 | AN9/CN9/RB9 — Analog input 9 / change notification / general I/O |
| 핀 30 | AN8/CN8/RB8 — Analog input 8 / change notification / general I/O |
| 핀 31 | AN7/CN7/RB7 — Analog input 7 / change notification / general I/O |
| 핀 32 | AN6/CN6/RB6 — Analog input 6 / change notification / general I/O |
| 핀 33 | AN5/CN5/RB5 — Analog input 5 / change notification / general I/O |
| 핀 34 | AN4/CN4/RB4 — Analog input 4 / change notification / general I/O |
| 핀 35 | AN3/CN3/RB3 — Analog input 3 / change notification / general I/O |
| 핀 36 | AN2/CN2/RB2 — Analog input 2 / change notification / general I/O |
| 핀 37 | AN1/CN1/RB1 — Analog input 1 / change notification / general I/O |
| 핀 38 | AN0/CN0/RB0 — Analog input 0 / change notification / general I/O |
| 핀 39 | VSS — Ground reference |
| 핀 40 | VDD — Positive supply (3.0V to 3.6V) |
| 핀 41 | OA1OUT/AN24/C3INA — Op amp 1 output / analog input 24 / comparator 3 input A |
| 핀 42 | OA1IN-/AN23 — Op amp 1 inverting input / analog input 23 |
| 핀 43 | OA1IN+/AN22 — Op amp 1 non-inverting input / analog input 22 |
| 핀 44 | CVREF-/OA2OUT/AN21 — CV reference negative / op amp 2 output / analog input 21 |
| 핀 45 | CVREF+/OA2IN-/AN20 — CV reference positive / op amp 2 inverting input / analog input 20 |
| 핀 46 | OA2IN+/AN19 — Op amp 2 non-inverting input / analog input 19 |
| 핀 47 | OA3OUT/AN18/C2INA — Op amp 3 output / analog input 18 / comparator 2 input A |
| 핀 48 | OA3IN-/AN17/C2INB — Op amp 3 inverting input / analog input 17 / comparator 2 input B |
| 핀 49 | OA3IN+/AN16/C1INA — Op amp 3 non-inverting input / analog input 16 / comparator 1 input A |
| 핀 50 | C1INB/RP18/RD1 — Comparator 1 input B / remappable peripheral / general I/O port D bit 1 |
| 핀 51 | C1INC/RP19/RD2 — Comparator 1 input C / remappable peripheral / general I/O port D bit 2 |
| 핀 52 | C1IND/RP20/RD3 — Comparator 1 input D / remappable peripheral / general I/O port D bit 3 |
| 핀 53 | C2IND/RP21/RD4 — Comparator 2 input D / remappable peripheral / general I/O port D bit 4 |
| 핀 54 | C3INB/RP22/RD5 — Comparator 3 input B / remappable peripheral / general I/O port D bit 5 |
| 핀 55 | C3INC/RP23/RD6 — Comparator 3 input C / remappable peripheral / general I/O port D bit 6 |
| 핀 56 | C3IND/RP24/RD7 — Comparator 3 input D / remappable peripheral / general I/O port D bit 7 |
| 핀 57 | VDD — Positive supply (3.0V to 3.6V) |
| 핀 58 | VSS — Ground reference |
| 핀 59 | PGEC1 — ICSP programming/debug clock (alternate remappable) |
| 핀 60 | PGED1 — ICSP programming/debug data (alternate remappable) |
| 핀 61 | TMS/RG14 — JTAG test mode select / general I/O port G bit 14 |
| 핀 62 | TCK/RG12 — JTAG test clock / general I/O port G bit 12 |
| 핀 63 | TDO/RG13 — JTAG test data out / general I/O port G bit 13 |
| 핀 64 | TDI/RG15 — JTAG test data in / general I/O port G bit 15 |
일반적인 애플리케이션
PIC24EP64GP206-E/PT 적합 용도: 6 애플리케이션s: Industrial Motor Control (BLDC / PMSM), Digital Power Conversion (PFC, LLC, PSFB), LED Lighting Drivers and Dimming, Uninterruptible Power Supplies (UPS) and Inverters, Industrial Sensor Signal Conditioning, Automotive Body Electronics.
Industrial Motor Control (BLDC / PMSM)
The PIC24EP64GP206-E/PT fits industrial motor-control applications through its 70 MIPS PIC24E core, integrated three op amps for current-sense amplification, three comparators for cycle-by-cycle overcurrent protection, and the PTG peripheral that offloads ADC-to-PWM timing from the CPU. With 64KB Flash and 8KB RAM, it can host sensorless FOC firmware for BLDC/PMSM motors up to several hundred watts. The extended -40C to +125C temperature grade handles under-hood or outdoor industrial cabinet environments. For higher current drives, choose the sibling MC variant (PIC24EP64MC206-E/PT) which adds dedicated motor-control PWM with complementary outputs and programmable dead-time, both pin-compatible in the same TQFP-64 footprint.
추천
Digital Power Conversion (PFC, LLC, PSFB)
The PIC24EP64GP206-E/PT is well matched to digital power supply control loops where the 70 MIPS DSP-enhanced core can execute digital compensators at hundreds of kHz switching frequencies. The 500 ksps ADC samples current/voltage at sub-microsecond intervals, while the high-speed PWM module generates the switching waveform; the PTG synchronizes ADC sampling to PWM edges without CPU intervention. The integrated op amps condition current-shunt signals directly into the ADC, and the comparators implement hardware cycle-by-cycle current limiting. The extended temperature grade supports industrial PSU environments. For higher-power designs, the larger Flash PIC24EP512GP206-E/PT in the same TQFP-64 footprint supports soft-start, telemetry, and PMBus stacks.
추천
LED Lighting Drivers and Dimming
The PIC24EP64GP206-E/PT serves architectural and horticultural LED drivers by combining enough CPU throughput to compute CIE color-mixing algorithms with the CTMU for capacitive touch dimming interfaces. The three on-chip op amps sense multiple LED-string currents simultaneously, and the comparators enforce per-string overcurrent protection. The PWM module supports high-resolution dimming below 1% duty cycle without flicker. The 8KB RAM supports smooth color-transition buffers and gamma-correction lookup tables. The 64KB Flash hosts DMX-512, 0-10V, and DALI communication stacks concurrently. The -E temperature grade handles hot enclosed luminaire environments where internal ambient may exceed 70C.
추천
Uninterruptible Power Supplies (UPS) and Inverters
The PIC24EP64GP206-E/PT is appropriate for low-to-medium power UPS and solar inverter control boards because the PIC24E core can execute MPPT and inverter control loops in real time while communicating with the host system. The integrated op amps and comparators condition battery-current shunt signals and grid-voltage sense inputs directly. The PTG peripheral offloads ADC-to-PWM sequencing for the inverter bridge. The 8KB RAM holds waveform reference tables, and 64KB Flash accommodates grid-tie safety and anti-islanding code. The extended temperature range supports outdoor inverter cabinet deployments where internal temperatures regularly exceed 85C during full sun load.
추천
Industrial Sensor Signal Conditioning
The PIC24EP64GP206-E/PT is ideal for industrial 4-20 mA loop transmitters, RTD/thermocouple front-ends, and bridge sensor signal conditioners thanks to its integrated three op amps for instrumentation-amp topologies, three comparators for threshold detection, and 500 ksps 12-bit ADC for digitization. The CTMU enables precision time-measurement for ratiometric sensor excitation. With 64KB Flash, the device can host IEEE 1451.4 transducer interface, HART or IO-Link communication stacks, and linearization lookup tables. The -E temperature grade supports field-mounted industrial sensors where ambient ranges from -40C to +125C. The TQFP-64 package supports reflow assembly on standard 4-layer industrial PCBs.
추천
Automotive Body Electronics
The PIC24EP64GP206-E/PT is AEC-Q100 qualified per the manufacturer datasheet, making it appropriate for automotive body-electronics modules such as HVAC controllers, seat-control units, mirror modules, and lighting ECUs. The 70 MIPS core executes CAN/LIN communication stacks alongside body-control logic. Three on-chip op amps drive multiple actuator feedback loops simultaneously, and the CTMU supports capacitive touch interfaces for door-handle or seat-occupancy detection. The -40C to +125C extended temperature grade handles under-dash and under-hood environments. The 64-pin TQFP (10x10 mm) footprint fits compact body modules. For higher-integration designs requiring CAN-FD and more Flash, the PIC24EP512GP206-E/PT shares the same TQFP-64 footprint.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24EP64GP206-E/PT — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24EP512GP206-E/PT | PIC24EP256GP206-E/PT | PIC24EP64MC206-E/PT | PIC24EP64GP206-I/PT | PIC24EP512GP206-I/PT | PIC24EP256MC206-E/PT |
|---|---|---|---|---|---|---|---|
| Package | TQFP-64 (PT) 10x10 mm | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same | TQFP-64 (PT) 10x10 mm - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / MIPS | PIC24E, 70 MIPS | PIC24E, 70 MIPS - same | PIC24E, 70 MIPS - same | PIC24E, 70 MIPS - same | PIC24E, 70 MIPS - same | PIC24E, 70 MIPS - same | PIC24E, 70 MIPS - same |
| Flash Memory | 64 KB | 512 KB (+700%) | 256 KB (+300%) | 64 KB - same | 64 KB - same | 512 KB (+700%) | 256 KB (+300%) |
| RAM | 8 KB | 52 KB (+550%) | 16 KB (+100%) | 8 KB - same | 8 KB - same | 52 KB (+550%) | 16 KB (+100%) |
| Temperature Grade | -40C to +125C (E) | -40C to +125C (E) - same | -40C to +125C (E) - same | -40C to +125C (E) - same | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) - same |
| Internal Op Amps | 3 | 3 - same | 3 - same | 3 - same | 3 - same | 3 - same | 3 - same |
| Peripheral Variant | GP (General Purpose + CTMU + PTG) | GP (General Purpose) | GP (General Purpose) | MC (Motor Control PWM) | GP (General Purpose) | GP (General Purpose) | MC (Motor Control PWM) |
주요 차별점
- Smaller Flash footprint, lower unit cost (vs PIC24EP512GP206-E/PT)
- General-purpose peripheral emphasis with CTMU and PTG (vs PIC24EP64MC206-E/PT)
- Extended temperature grade for harsh environments (vs PIC24EP64GP206-I/PT)
- Higher ADC sampling rate for digital control loops (vs PIC24FJ64GS610-I/PT)
설계 노트
Place a 100 nF ceramic decoupling capacitor within 5 mm of every VDD pin (pins 7, 20, 40, 57) and the VSS pins adjacent to them; add a single 10 uF bulk tantalum or ceramic capacitor at the supply entry point. The PIC24EP64GP206-E/PT core voltage is generated internally from VDD - do NOT connect an external supply to VDDCORE (pin 28); leave it floating or add a 1 uF local bypass per the family datasheet. A low-noise 3.3V LDO such as MCP1700-3302E is the recommended upstream supply for noise-sensitive ADC measurements.
Use a 4-layer PCB stack-up with a continuous ground plane directly beneath the TQFP-64 device; route all high-speed PWM signals on the top layer with a ground reference on layer 2. Place the analog ground (VSS pins 21, 39, 58) and digital ground (VSS pin 6) on a single unified ground plane, but isolate analog signal returns from noisy switching returns to avoid ground bounce coupling into the ADC. The exposed thermal pad is not present on the TQFP-64; use wide copper pours on all VDD/VSS traces to spread heat under sustained load.
Do not exceed the absolute maximum VDD of 3.6V - applying 5V from a typical Arduino-style 5V rail will permanently damage the device. The PGEC1/PGED1 pins (59, 60) must NOT be repurposed as GPIO if in-circuit serial programming (ICSP) is required for field firmware updates. When using the internal op amps (pins 41-49), configure unused op amps in power-down mode in firmware to save quiescent current. The CTMU current source requires a calibration routine stored in Flash to achieve rated absolute accuracy.
The PWM output pins are high-speed signals (rise time < 5 ns at full drive) - keep PWM traces short and series-terminate if the trace length exceeds 25 mm to prevent ringing. Place the antialiasing RC filter on each analog input within 10 mm of the MCU pin and before any series resistance that could form a low-pass with the ADC sample-and-hold capacitor. Use the Peripheral Trigger Generator (PTG) to synchronize ADC sampling to the PWM center-aligned zero event for clean current-sense measurements.
규정 준수 정보
AEC-Q100 qualified per Hotenda product listing verified 2026-09-29. RoHS compliant, lead-free, halogen-free per Microchip ordering code. The E suffix indicates the extended -40C to +125C automotive grade.
