집적 회로

하위 카테고리

📁 ADC/DAC 2520 제품 📁 증폭기 IC 799 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 311 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1601 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18750 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32853)

PIC24F16KM104T-I/ML - 16KB Flash 16-bit MCU 44-QFN | XLP™ Low Power
PIC24F16KM104T-I/ML

PIC24F16KM104T-I/ML - 16KB Flash 16-bit MCU 44-QFN | XLP™ Low Power

The Microchip Technology PIC24F16KM104T-I/ML is a 16-bit PIC microcontroller from the PIC24F XLP™ KM family, featuring 16KB (5.5K x 24) of Flash program memory, 1KB of SRAM, and 512B of EEPROM, all housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. It operates from 1.8V to 5.5V with a 32MHz maximum CPU clock, integrating a 12-bit ADC, 12-bit DAC, op amps, comparators, Configurable Logic Cells (CLC), and MCCP/SCCP timer/PWM modules. The 'T' suffix denotes Tape and Reel packaging, while the 'I' indicates the industrial -40C to +85C temperature range. A PIC24F microcontroller belongs to Microchip's 16-bit PIC architecture family, which sits between the 8-bit PIC16/PIC18 devices and the higher-performance dsPIC/PIC32 families. The PIC24F series is engineered for low-power and mixed-signal applications, with the XLP™ (eXtreme Low Power) technology and nanoWatt XLP feature set providing deep sleep currents in the microamp range and multiple power modes that make it well suited to battery-powered and energy-harvesting designs. Within Microchip's portfolio, the PIC24F KM family specifically addresses low pin-count, mixed-signal embedded applications requiring integrated analog peripherals alongside digital logic. Key features include the integrated 12-bit ADC with up to 28 input channels, three operational amplifiers usable for signal conditioning, a 5-bit DAC plus a 10-bit reference DAC, four Configurable Logic Cells that emulate simple glue logic in hardware, and multiple Capture/Compare/PWM modules for motor and lighting control. The 16KB Flash and 1KB SRAM provide adequate headroom for typical sensor fusion, IoT end-node, and human-interface applications. Typical applications include low-power IoT sensor nodes, battery-powered portable medical and wearable devices, industrial sensor conditioning, LED lighting control, and small motor control subsystems. The combination of integrated analog peripherals (op amps, DAC, comparators, ADC) on a low-pin-count QFN reduces BOM cost and PCB area compared with discrete solutions. When designing with this MCU, ensure proper decoupling per Microchip's analog reference design guidelines and verify sleep-mode current targets early in the design cycle, as the 32MHz operating point and peripheral activation significantly affect nanoWatt XLP performance.

견적 요청 문의하기
PIC24F16KM104T-I/MV - 16KB Flash XLP 16-Bit MCU | Microchip
PIC24F16KM104T-I/MV

PIC24F16KM104T-I/MV - 16KB Flash XLP 16-Bit MCU | Microchip

The Microchip Technology PIC24F16KM104T-I/MV is a 16-bit PIC24F microcontroller with 16KB of Flash program memory (5.5K x 24 words), 1KB of SRAM, and 512B of EEPROM, housed in a 48-pin UQFN 6x6 mm package with exposed thermal pad. The part is qualified for industrial -40C to +85C operation, executes instructions at up to 32 MHz (8 MIPS), and integrates a 12-bit ADC, multiple 16-bit timers, configurable logic cells (CLC), and dual MCCP/SCCP PWM/capture/compare peripherals. What is a 16-bit microcontroller? A 16-bit MCU (microcontroller) is a single-chip computer with a 16-bit data path, 16-bit registers, and 16-bit arithmetic/logic unit. Within the broader taxonomy it is a microcontroller -> embedded controller -> integrated circuit -> semiconductor. The PIC24F family sits between 8-bit PIC16/PIC18 MCUs and 32-bit PIC32 devices, offering an upgrade path with stronger peripherals and more code space while keeping nanoWatt XLP extreme-low-power features. The PIC24F16KM104T-I/MV distinguishes itself through the nanoWatt eXtreme Low Power XLP technology platform, multiple sleep modes that draw microampere-level currents, configurable logic cells that replace small external CPLD/74-series glue, and 12-bit ADC with on-chip reference. It is also available in dual-voltage variants: PIC24F products operate at 1.8V-3.6V while PIC24FV versions support 2.0V-5.5V for 5V tolerant designs. Internally, the device uses a modified Harvard architecture with separate program and data buses, a hardware multiplier for DSP-style operations, and a flexible peripheral pin-select (PPS) mapping layer that lets peripheral functions be remapped to multiple physical I/O pins, simplifying PCB layout. Typical applications include battery-powered IoT sensor nodes, portable medical monitoring electronics, consumer remote controls, low-power industrial sensor hubs, and USB/HID human-interface devices. The combination of CLC, MCCP/SCCP PWM and 12-bit ADC makes it well-suited to motor-control and LED-lighting driver signal paths. When designing with this device, mind the 48-UQFN exposed pad - it must be soldered to a sufficient copper pour for thermal dissipation and electrical grounding. Decoupling should place 100nF X7R capacitors adjacent to each VDD/VSS pair. This page synthesizes distributor pricing, same-family PIC24F drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC24F16KM104T-I/PT - 16-bit XLP MCU 32MHz 16KB Flash TQFP-44
PIC24F16KM104T-I/PT

PIC24F16KM104T-I/PT - 16-bit XLP MCU 32MHz 16KB Flash TQFP-44

The Microchip Technology PIC24F16KM104T-I/PT is a 16-bit PIC® XLP™ 24F microcontroller featuring a 32 MHz core, 16 KB of Flash program memory, 1 KB of SRAM, and 512 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. It belongs to Microchip's eXtreme Low Power (XLP) family, optimized for battery-powered and energy-harvesting applications that demand long runtime from small cells. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripherals such as timers, communication interfaces, and analog channels. The PIC24F belongs to Microchip's 16-bit modified-Harvard architecture family, positioned above 8-bit PIC MCUs in computational performance and peripheral integration. It sits within the broader taxonomy: microcontroller -> embedded processor -> semiconductor IC. Key features of this part include nanoWatt XLP sleep currents as low as 20 nA in deep sleep, multiple communication peripherals (I2C, SPI, UART, IrDA, and LIN), configurable logic cells (CLC), and a 12-bit ADC with multiple input channels. The integrated 32 MHz internal oscillator eliminates the need for an external crystal in many designs, reducing BOM cost and PCB area. The PIC24F architecture uses a 16-bit modified-Harvard core with a 24-bit instruction word, enabling 32 MHz operation (16 MIPS) while retaining the deterministic interrupt response that PIC MCUs are known for. Peripheral features include up to 5 CCP/ECCP modules, multiple 16-bit timers, a hardware Real-Time Clock/Calendar (RTCC), and charge time measurement unit (CTMU) for capacitive touch sensing. Typical applications include low-power IoT sensor nodes, battery-powered medical devices such as glucose meters and portable monitors, automotive LIN nodes for body and comfort electronics, industrial sensor transmitters, and consumer products requiring ultra-long battery life. The wide operating voltage range supports both 3V lithium and 1.8V-3.6V regulated supplies. When designing with this device, the integrated 32 MHz oscillator and internal LDO simplify power-tree design; place decoupling capacitors (100 nF plus 10 µF bulk) within a few millimeters of the VDD pins to minimize digital switching noise on the analog rails. This page synthesizes distributor pricing, drop-in TQFP-44 alternatives from the same Microchip PIC24F family, and practical low-power design notes that are not collected in the manufacturer datasheet itself.

견적 요청 문의하기
PIC24F16KM202-E/ML - 16KB Flash 16-bit XLP MCU 28-QFN | Microchip
PIC24F16KM202-E/ML

PIC24F16KM202-E/ML - 16KB Flash 16-bit XLP MCU 28-QFN | Microchip

The Microchip PIC24F16KM202-E/ML is a 16-bit PIC24F microcontroller built on the eXtreme Low Power (XLP) architecture, providing 32 MHz CPU performance, 16 KB (5.5K x 24 instruction words) of Flash program memory and 2 KB of RAM in a 28-pin VQFN (6x6 mm) package with exposed thermal pad. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of analog and digital peripherals. PIC24F devices sit in the 16-bit segment of the PIC family and are positioned between the 8-bit PIC16/PIC18 line and higher-end dsPIC/PIC32 parts; their role spans battery-powered sensing nodes, consumer user interfaces, and industrial control sub-systems where deterministic behavior and ultra-low sleep current matter more than raw CPU throughput. Key features of the PIC24F16KM202 include integrated 12-bit ADC with up to 19 channels and 200 ksps sampling rate, dual 8-bit DAC outputs, three on-chip op amps, three comparators, configurable logic cells (CLC), five PWM time bases, five output-compare channels, two UART modules, two I2C/SPI MSSP peripherals, IrDA and a chargeable RTCC. The XLP design targets sleep currents well under 1 uA in deep-sleep modes, while the 1.8 V to 3.6 V operating range supports direct Li-ion or two-AA battery rails. The device uses a 16-bit modified Harvard RISC core with hardware multiply/divide and a 24-bit instruction word, paired with a 7-channel DMA controller that offloads ADC, UART, and SPI transfers. Internal RC oscillators and a PLL provide flexible clocking for low-power or 32 MHz active modes, and the on-chip op amps can be routed to ADC inputs or used as standalone analog building blocks. Typical applications include low-cost consumer electronics, IoT sensor nodes, battery-powered medical monitoring accessories, industrial sensor conditioning loops, automotive body and lighting sub-systems (using the -E 125°C grade), and analog-rich front ends where the integrated op amps, comparators, and 12-bit ADC replace several discrete components. When designing in this MCU, place a 100 nF decoupling capacitor on each VDD pin plus a bulk 4.7 uF or larger on the main rail, route the exposed pad (EP) to a solid ground copper pour for thermal dissipation and AC return, and verify unused I/O pins are configured as outputs or left floating per the datasheet to minimize leakage in sleep mode. This page synthesizes the manufacturer datasheet with distributor pricing, AEO-optimized answers, and a drop-in alternatives list that goes beyond what the standard parametric search returns.

견적 요청 문의하기
PIC24F16KM202-E/SO - 16KB Flash 16-bit MCU | Microchip
PIC24F16KM202-E/SO

PIC24F16KM202-E/SO - 16KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24F16KM202-E/SO is a 16-bit PIC microcontroller from the PIC24F eXtreme Low Power (XLP) family, featuring 16 KB of Flash program memory, 2 KB of RAM, and a 32 MHz maximum CPU speed, housed in a 28-pin SOIC wide-body package. The device integrates rich analog peripherals including a 12-bit ADC, an 8-bit DAC, and operational amplifiers, making it suitable for sensor interface and signal-conditioning applications. What is a 16-bit microcontroller? A 16-bit microcontroller is an embedded computing device that processes data with a 16-bit-wide data path, instruction word, and register set, offering a balance between 8-bit simplicity and 32-bit performance. Within the broader embedded hierarchy, PIC24F MCUs sit between 8-bit PIC16/PIC18 devices and 32-bit PIC32MX/dsPIC33 devices, targeting low-power mixed-signal applications with moderate computational requirements. They belong to the Microcontroller > Microcontrollers > Integrated Circuits taxonomy and are typically used as system-on-chip controllers in battery-powered and analog-front-end designs. Key features of the PIC24F16KM202 include eXtreme Low Power (XLP) technology with multiple deep-sleep modes, configurable logic cells (CLC), multiple Capture/Compare/PWM (SCCP/MCCP) modules, and support for communication peripherals such as I2C, SPI, and UART. The integrated op amps and DAC eliminate the need for many external analog components, reducing BOM cost and PCB area while improving noise immunity in tightly-coupled analog loops. From an architectural standpoint, the PIC24F16KM202 uses a modified Harvard architecture with a 16-bit wide instruction path and a 24-bit instruction word, providing deterministic interrupt latency and efficient C compilation through the MPLAB XC16 toolchain. The device supports a wide operating voltage range, internal voltage reference options, and on-chip debugging via standard ICSP interfaces, simplifying prototype bring-up. Typical applications include IoT sensor nodes, battery-powered medical monitors, industrial sensor conditioning loops, low-power consumer electronics, and analog-front-end daughter boards. The combination of integrated op amps, ADC, and DAC makes it well-suited for closed-loop control without external analog ICs. Designers should pay attention to the -E temperature grade suffix, which denotes the Extended (-40C to +125C) operating range suitable for industrial environments. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not collected in any single manufacturer datasheet, providing unique decision support for engineers evaluating this MCU.

견적 요청 문의하기
PIC24F16KM202-I/ML - 16-Bit 32MHz Low-Power MCU | Microchip
PIC24F16KM202-I/ML

PIC24F16KM202-I/ML - 16-Bit 32MHz Low-Power MCU | Microchip

The Microchip Technology PIC24F16KM202-I/ML is a 16-bit PIC XLP microcontroller operating at up to 32 MHz, with 16 KB of Flash program memory and integrated analog peripherals, packaged in a 28-QFN (6x6 mm) package. It supports a 1.8 V to 3.6 V operating range and combines a 12-bit ADC, 8-bit DAC, operational amplifiers, Configurable Logic Cells, and flexible capture/compare/PWM resources. The device is designed for low-power embedded systems where analog signal conditioning and digital control must share a compact footprint. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output interfaces onto one device. The PIC24F16KM202 belongs to the 16-bit PIC microcontroller family and is positioned between simple 8-bit controllers and higher-performance 32-bit MCUs. Its PIC XLP designation emphasizes low-power operation for battery-powered and portable equipment, while the integrated analog blocks reduce the need for external converters or signal-conditioning components. The verified product information identifies 16 KB of Flash memory organized as 5.5K x 24 words, 2 KB of RAM, 512 bytes of EEPROM, 24 I/O, a 12-bit ADC, and an 8-bit DAC. The integrated operational amplifiers and Configurable Logic Cells can support signal conditioning, thresholding, filtering, control logic, and sensor-interface applications. The 32 MHz maximum CPU frequency provides useful processing headroom for control loops, communication handling, and mixed analog-digital firmware. Typical applications include low-power sensor nodes, industrial measurement modules, compact control systems, embedded instrumentation, battery-powered monitoring equipment, and analog-rich IoT products. The ADC supports digitized sensor measurements, while the DAC and operational amplifiers can support excitation, biasing, and output-control functions. The 28-QFN package helps reduce board area, although exposed-pad layout and thermal management must follow the manufacturer’s package guidance. Designers should confirm the exact pin assignments, exposed-pad connection, decoupling requirements, and peripheral multiplexing in the PIC24F16KM202 datasheet before layout. This page consolidates verified manufacturer and distributor information, documented analog resources, package data, sourcing references, and engineering-focused selection guidance for embedded designers.

견적 요청 문의하기
PIC24F16KM202-I/SO - 16-bit XLP MCU, 32MHz, 16KB Flash | Microchip
PIC24F16KM202-I/SO

PIC24F16KM202-I/SO - 16-bit XLP MCU, 32MHz, 16KB Flash | Microchip

The Microchip Technology PIC24F16KM202-I/SO is a 16-bit eXtreme Low Power (XLP) microcontroller featuring 32 MHz MIPS CPU core, 16 KB Flash program memory, 2 KB RAM, and 512 bytes EEPROM in a 28-pin SOIC (300 mil) package. It is part of the PIC24F16KM family that integrates rich mixed-signal peripherals including a 12-bit ADC, an 8-bit DAC, rail-to-rail operational amplifiers, comparators, and a Configurable Logic Cell (CLC) on-chip. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a configurable peripheral set behind a unified bus architecture. Microcontrollers are the highest-volume category of embedded processors and sit within the broader semiconductor taxonomy as follows: microcontroller -> embedded processor -> integrated circuit. The PIC24F family is built on a 16-bit modified Harvard architecture targeting low-power deterministic control. Key features of the PIC24F16KM202 include the company's eXtreme Low-Power (XLP) technology with deep-sleep currents below 100 nA typical, 32 MHz operation from a 1.8-3.6V supply, multiple Capture/Compare/PWM (SCCP) and Master CCP modules, hardware RTCC with calendar mode, USB Full-Speed on some family variants, and a 16-bit Parallel Master Port. The 28-SOIC package exposes up to 25 GPIO, three 16-bit timers, two UART, two SPI, and two I2C peripherals simultaneously. From an architecture standpoint, the device uses a 16-bit modified Harvard core with separate program and data paths and a 17-word instruction prefetch queue, enabling near-single-cycle throughput at 32 MHz (16 MIPS). The integrated op-amp and DAC peripherals allow direct analog signal conditioning without external components, while the CLC block implements combinational/sequential logic glue to reduce external gates. Typical applications include eXtreme low-power sensor nodes, IoT edge devices, portable medical instrumentation, battery-powered consumer products, and digital power-conversion control loops. The wide operating voltage range (1.8V-3.6V) supports direct Li-Ion cell operation without additional regulation. When designing with this MCU, ensure that VDDCORE and VDD are decoupled per Microchip's recommended layout, that the programming/debug pins are accessible for ICSP, and that the system's worst-case active current budget is verified against the device's 32 MHz run current of about 7 mA. Use the MPLAB XC16 compiler and MPLAB X IDE for code development. This page consolidates distributor pricing, same-brand drop-in alternatives, and application design notes that complement the manufacturer datasheet.

견적 요청 문의하기
PIC24F16KM202-I/SP - 16-bit XLP MCU 32MHz 16KB Flash SPDIP-28
PIC24F16KM202-I/SP

PIC24F16KM202-I/SP - 16-bit XLP MCU 32MHz 16KB Flash SPDIP-28

The Microchip Technology PIC24F16KM202-I/SP is a 16-bit PIC® XLP™ (eXtreme Low Power) microcontroller featuring a 32 MHz MIPS-based core, 16 KB of Flash program memory, 2 KB of SRAM and 512 bytes of EEPROM, housed in a 28-pin SPDIP package. Designed for analog-rich, low-power embedded designs, it integrates a 12-bit ADC, an 8-bit DAC, operational amplifiers, comparators, and a Configurable Logic Cell (CLC) that lets designers implement custom glue logic in silicon. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), volatile data memory (RAM), non-volatile data memory (EEPROM), and a rich set of peripherals on one IC. Within the broader semiconductor taxonomy, the PIC24F16KM202 sits inside the PIC24F family of 16-bit Flash microcontrollers, which in turn belongs to the 16-bit MCU category, the microcontroller product class, and finally the broader embedded computing domain. The XLP technology explicitly targets battery-powered applications by combining sleep currents in the nanoampere range with multiple low-power operating modes. Key features include eXtreme Low Power consumption with multiple idle/sleep modes, 12-bit A/D conversion with up to 16 channels, 8-bit DAC output, on-chip operational amplifiers and comparators for signal conditioning, multiple Capture/Compare/PWM (SCCP) and Output Compare/PWM modules for timing-critical control, UART/SPI/I²C serial interfaces, and the CLC peripheral for hardware state-machine implementation. The 32 MHz operation delivers up to 16 MIPS instruction throughput, while the integrated 3V and 5V operating range provides flexibility across industrial and consumer rails. The device uses the PIC24F modified Harvard architecture with 24-bit instruction words, a 16-bit data path, and a hardware multiply/divide unit. The 12-bit ADC supports multiple conversion trigger sources and a dedicated 1.024 V internal reference, while the integrated op-amps can drive sensor signals directly into the ADC without external amplifiers, reducing BOM cost and PCB area. Typical applications include low-power IoT sensor nodes, portable medical and fitness monitoring devices, battery-powered industrial instrumentation, LED lighting controllers, and small appliance control boards. The on-chip analog peripherals make it especially suitable for sensor signal-conditioning designs where external op-amps and ADCs would otherwise inflate cost. When designing with the PIC24F16KM202, the most common pitfall is exceeding the absolute maximum ratings of 6 V on VDD. Designers should also leave the ICD pins reserved for in-circuit debugging and route the analog supply (AVDD) separately from the digital supply (VSS/AVSS) for low-noise ADC performance. This page synthesizes distributor pricing, drop-in compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single decision-making reference.

견적 요청 문의하기
PIC24F16KM202-I/SS - 16-bit XLP MCU, 16KB Flash, 28-SSOP | Microchip
PIC24F16KM202-I/SS

PIC24F16KM202-I/SS - 16-bit XLP MCU, 16KB Flash, 28-SSOP | Microchip

The Microchip Technology PIC24F16KM202-I/SS is a 16-bit PIC24F microcontroller featuring 32 MHz CPU performance, 16 KB Flash program memory, 2 KB SRAM, and 512 bytes of EEPROM, housed in a 28-pin SSOP package. It belongs to the PIC24F16KM family which integrates eXtreme Low Power (XLP) technology with rich analog peripherals including 12-bit ADC, 8-bit DAC, operational amplifiers, comparators, and Configurable Logic Cells (CLC), enabling compact system designs with reduced BOM. A 16-bit PIC microcontroller is a member of the Microchip PIC24F family built on a modified Harvard RISC architecture. The PIC24F family sits within the broader 8/16/32-bit MCU taxonomy and is positioned as ultra-low-power (XLP) mixed-signal controllers for battery-powered and analog-rich embedded designs. These devices bridge the gap between PIC16/PIC18 8-bit controllers and dsPIC33/PIC32 32-bit controllers, providing deterministic interrupt response, hardware DSP-like multiply, and integrated analog that historically required external components. Key features include a 32 MHz maximum CPU clock (8 MIPS), 16 KB self-programmable Flash, 2 KB SRAM, 512 B EEPROM, integrated 12-bit ADC with up to 9 channels, 8-bit DAC, two operational amplifiers, two comparators, three CLC modules, and multiple Capture/Compare/PWM (CCP/OC) peripherals. The device supports 1.8V to 3.6V operation (PIC24F variant; PIC24FV variants support 2.0V-5.5V), making it ideal for both 3V and 5V system designs depending on variant selection. The PIC24F16KM202 uses a 16-bit modified Harvard architecture with hardware multiply/divide, 16 working registers, deterministic interrupt latency, and on-chip debugging via ICSP/ICD. Its XLP current consumption can drop into the nanoamp sleep-current range with proper configuration, supporting years of operation from a single coin cell. Typical applications include low-power IoT sensor nodes, battery-powered medical monitors, industrial sensor signal conditioning with on-chip op-amps, USB device firmware bridges, and consumer products that demand long standby time. The integrated op-amps, comparators, and CLC allow blocks of analog signal conditioning that would otherwise require external ICs, reducing total system cost. When designing with this MCU, account for the 1.8V-3.6V VDD range and consider that the PIC24FV variants support 2.0V-5.5V for 5V-native systems. For USB peripherals, add an external voltage regulator since the on-chip LDO is not designed for USB PHY supply. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a one-stop engineering reference for embedded designers.

견적 요청 문의하기
PIC24F16KM202T-I/SS - 16-bit XLP MCU, 32MHz, 16KB Flash | Microchip
PIC24F16KM202T-I/SS

PIC24F16KM202T-I/SS - 16-bit XLP MCU, 32MHz, 16KB Flash | Microchip

The Microchip Technology PIC24F16KM202T-I/SS is a 16-bit PIC microcontroller from the PIC24F XLP family, featuring an eXtreme Low Power PIC MCU core running up to 32 MHz instruction rate, 16 KB (5.5K x 24) Flash program memory, 2 KB SRAM, and housed in a 28-pin SSOP package with industrial -40C to +85C temperature grade. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals such as ADC, timers, and communication interfaces on one die. Within the broader hierarchy, MCUs sit under microcontrollers and processors, which are themselves a category of embedded processors in the semiconductor taxonomy. The PIC24F XLP family targets ultra-low-power embedded designs, while the 16-bit modified-RISC and CISC hybrid core balances deterministic interrupt response with C-friendly code density. Key features of the PIC24F16KM202T-I/SS include a 12-bit A/D converter, an 8-bit DAC, integrated op amps, comparators, a Configurable Logic Cell (CLC), multiple Capture/Compare/PWM modules, and serial interfaces such as I2C, SPI, and UART/USART plus IrDA and LIN support. The XLP designation indicates deep sleep currents in the nanoamp range, making this device suitable for battery-powered or energy-harvesting applications. Typical applications include IoT sensor nodes, portable medical devices, industrial control, automotive body electronics (LIN bus), and ultra-low-power wireless endpoints. The combination of integrated op amps and a 12-bit ADC simplifies analog front-end design, eliminating external signal-conditioning components. When designing with this MCU, confirm that the 28-SSOP footprint matches the PCB land pattern and that the operating voltage range aligns with your power tree; consider using MPLAB X IDE and the XC16 compiler toolchain for development. This page synthesizes Microchip cross-reference findings, distributor pricing tiers, and engineering design notes - information not aggregated in the standalone PIC24F16KM202 datasheet.

견적 요청 문의하기
PIC24F16KM204-E/ML - 16-bit XLP MCU, 16KB Flash, 44-QFN | Microchip
PIC24F16KM204-E/ML

PIC24F16KM204-E/ML - 16-bit XLP MCU, 16KB Flash, 44-QFN | Microchip

The Microchip Technology PIC24F16KM204-E/ML is a 16-bit eXtreme Low Power (XLP) PIC microcontroller with 16KB Flash, 2KB RAM and 512B EEPROM, integrated 12-bit ADC, 8-bit DAC and operational amplifiers, housed in a 44-pin QFN (8x8 mm) package with exposed pad. It operates from 1.8V to 5.5V supply with a 32 MHz MIPS core and provides flexible Capture/Compare/PWM modules, Configurable Logic Cell and op amps for sensor and signal-chain applications. A 16-bit PIC microcontroller (MCU) is a member of the wider microcontroller family that integrates a CPU, non-volatile program memory, SRAM, peripherals and I/O on a single die. Within the Microchip taxonomy, PIC24F devices are the low-power 16-bit MIPS-based family positioned below PIC24H/dsPIC for general-purpose mixed-signal embedded designs. XLP (eXtreme Low Power) parts add deep-sleep currents in the nanoamp range, making them suitable for battery-powered and energy-harvesting designs. A QFN-44 package is a quad flat no-lead plastic enclosure with an exposed thermal pad that also serves as a low-impedance ground, optimized for surface-mount manufacturing. Key features include 25 MIPS performance at 32 MHz, 9-channel 12-bit ADC with up to 500 ksps, two 8-bit DACs, two operational amplifiers, two comparators and configurable logic cells, plus multiple serial interfaces (UART, SPI, I2C). The integrated analog peripherals reduce external component count for sensor-conditioning and closed-loop control. Hardware CRC, RTCC and an extended watchdog timer support functional-safety and industrial-automation needs. Typical applications include low-power sensor nodes, industrial measurement and control, consumer appliances, portable medical devices, automotive body and lighting modules, and USB/HID peripherals (when paired with the PIC24FJ64GB002 family for USB connectivity). The 44-QFN footprint supports compact PCBs while exposing the thermal pad for heat spreading. When designing with this part, allocate the bottom-layer PCB copper under the exposed pad as a continuous ground island with stitched thermal vias to maximize heat dissipation and provide a low-inductance ground return for the analog blocks.

견적 요청 문의하기
PIC24F16KM204-E/MV - 32MHz 16-bit MCU, 16KB Flash, 48-UQFN | Microchip
PIC24F16KM204-E/MV

PIC24F16KM204-E/MV - 32MHz 16-bit MCU, 16KB Flash, 48-UQFN | Microchip

The Microchip Technology PIC24F16KM204-E/MV is a 16-bit PIC24F XLP microcontroller featuring eXtreme Low Power consumption, integrated 12-bit ADC, 8-bit DAC, and operational amplifiers, delivering 32 MIPS performance at 32 MHz from 16 KB of program Flash in a 48-pin UQFN (6x6) package. The device includes 2 KB SRAM and 512 bytes EEPROM for non-volatile data storage alongside flexible Capture/Compare/PWM modules and an integrated Configurable Logic Cell. What is a PIC24F XLP microcontroller? The PIC24F family is Microchip's 16-bit MCU portfolio based on a modified Harvard architecture with 16-bit instructions and an 8-bit data path. XLP (eXtreme Low Power) variants add deep-sleep currents below 1 µA and multiple power-saving modes, targeting battery-powered and energy-harvesting designs. The PIC24F sits in the hierarchy: PIC24F XLP -> 16-bit MCU -> microcontroller -> embedded processor -> integrated circuit. Key features include a 32 MHz maximum clock (8 MHz internal RC with PLL), 38 available I/O lines, up to 12 channels of 12-bit ADC with automated channel scanning, dual 8-bit DACs, and configurable op-amp peripherals. The device operates from 1.8V to 3.6V and includes 5V-tolerant I/O for mixed-voltage designs. Sleep currents as low as 20 nA make it suitable for always-on sensor nodes. The integrated RTCC with calendar mode eliminates an external RTC chip in many designs. The architecture uses a modified Harvard CPU with single-cycle hardware multiply and a 16-element working register array, enabling deterministic interrupt response and efficient C-code execution. The Peripheral Pin Select that serializes digital peripheral routing across nearly all I/O pins simplifies PCB layout and enables reconfigurable peripheral mapping without board changes. Typical applications include wearable fitness devices, battery-powered sensor hubs, low-power wireless sensor nodes, e-metering endpoints, and human-interface panels with capacitive touch. Designers select the PIC24F16KM204 when they need sub-µA deep-sleep behavior with on-chip analog integration. When designing, calculate worst-case power dissipation including active ADC/DAC conversions and prioritize using the device's deep-sleep modes (DOZE, PMD, and DS-WAKE) to extend battery life. Use the Peripheral Pin Select feature to route peripherals after layout, reducing rework. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not aggregated in the manufacturer datasheet.

견적 요청 문의하기
PIC24F16KM204-I/ML - 16-bit XLP MCU, 32MHz, 16KB Flash | Microchip
PIC24F16KM204-I/ML

PIC24F16KM204-I/ML - 16-bit XLP MCU, 32MHz, 16KB Flash | Microchip

The Microchip PIC24F16KM204-I/ML is a 16-bit PIC® XLP™ microcontroller delivering 32 MIPS performance at 32 MHz, with 16 KB of Flash program memory and 2 KB of RAM, housed in a 44-pin QFN (ML, 8x8 mm) package. It integrates an enhanced analog front end including a 12-bit ADC, an 8-bit DAC, operational amplifiers, comparators and a Configurable Logic Cell (CLC), which lets designers implement glue logic in software rather than adding discrete gates. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a set of programmable peripherals such as ADCs, timers, communication controllers and I/O. In the broader system hierarchy a PIC24F sits in the PIC24 family of 16-bit microcontrollers, which itself is part of Microchip's 8/16/32-bit MCU portfolio alongside PIC16, PIC18 and PIC32. The "XLP" (eXtreme Low Power) designation means the part is engineered for ultra-low sleep current, typically relevant for battery-powered and energy-harvesting designs. Key features include operation from 1.8 V to 5.5 V (with full analog performance at 3 V and 5 V), 32 MIPS at 32 MHz, 16 KB self-programmable Flash, 2 KB RAM, integrated 12-bit ADC, 8-bit DAC, two op amps, two comparators, CLC module, Capture/Compare/PWM modules, and standard peripherals such as UART, SPI and I²C. The PIC24F KM family is designed for sensor conditioning, mixed-signal front ends and small-form-factor embedded products. Architecturally the device uses a 16-bit modified-Harvard core with a 24-bit instruction word, a 17-bit x 17-bit hardware multiplier, and zero-overhead loop control. The peripheral set is clocked from the system peripheral bus, and the analog chain shares a common voltage reference, which simplifies PCB routing when many analog channels are needed. Typical applications include low-power sensor interfaces, portable medical devices, IoT edge nodes, industrial control front ends, and consumer devices that require on-chip signal conditioning. The integrated op amps and DAC reduce the bill of materials for transducer signal chains. When designing with this part, plan the analog pinout first because the QFN-44 package shares supply and reference pins between analog and digital domains. Decouple VDD/VSS with 100 nF ceramics placed within 3 mm of each supply pin, and add a bulk 10 µF capacitor at the regulator output to handle ADC charge kicks.

견적 요청 문의하기
PIC24F16KM204-I/MV - 16KB Flash 32MHz XLP 16-bit MCU | Microchip
PIC24F16KM204-I/MV

PIC24F16KM204-I/MV - 16KB Flash 32MHz XLP 16-bit MCU | Microchip

The Microchip Technology PIC24F16KM204-I/MV is a 16-bit microcontroller from the PIC24F XLP (eXtreme Low Power) family, featuring 16 KB of Flash program memory and 2 KB of RAM in a 48-pin UQFN (MV) 6x6 mm package with exposed pad. It operates from a 1.8V to 3.6V supply, supports dual voltage rails (2.5V or 3.3V typical), and runs at 32 MHz CPU clock with 8 MIPS throughput. The device integrates rich analog peripherals including a 12-bit ADC, dual 8-bit DACs, operational amplifiers, and comparators alongside digital peripherals such as Capture/Compare/PWM modules and a Configurable Logic Cell (CLC). What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, and a range of integrated peripherals intended for embedded control applications. The PIC24F family uses Microchip's modified Harvard 16-bit architecture with a rich instruction set optimized for C code density and deterministic interrupt response. Within Microchip's taxonomy, the PIC24F line sits between 8-bit PIC MCUs and the 32-bit PIC32MX/dsPIC families, targeting applications that need more performance and memory than 8-bit parts but ultra-low power consumption for battery operation. The XLP designation specifically denotes nanoWatt technology with deep-sleep currents below 20 nA typical. Key differentiating features of the PIC24F16KM204-I/MV include its integrated analog-rich peripherals (12-bit ADC, dual DACs, two op-amps, and three comparators) that eliminate external analog ICs in sensor-interface designs. The Configurable Logic Cell allows the on-chip combinator logic, AND/OR/XOR gates, and flip-flops to be programmed to create custom glue logic without external gates. Five 16-bit timers, multiple UART/SPI/I2C interfaces, and up to 43 I/O pins give designers flexibility for human-interface, motor-control, and IoT endpoints. The eXtreme Low Power technology delivers sleep currents as low as 20 nA in Deep Sleep mode, extending battery life in always-on applications. From an architectural perspective, the PIC24F16KM204 uses a 16-bit wide datapath with a 24-bit instruction word, providing C-friendly code density while retaining the deterministic interrupt latency that PIC architecture is known for. The device supports a wide operating voltage range of 1.8V to 3.6V with integrated voltage regulators and POR/BOR circuits. The 48-pin UQFN package has an exposed thermal pad that should be soldered to the ground plane for optimal electrical and thermal performance. Typical applications include IoT sensor nodes, low-power wireless remote controls, battery-powered medical devices such as glucose meters and pulse oximeters, industrial sensor interfaces, HVAC control panels, and consumer electronics with touch or display interfaces. The integrated analog peripherals make it particularly suited to sensor signal conditioning and closed-loop control applications. When designing with this MCU, ensure the exposed pad on the bottom of the UQFN package is properly soldered to the PCB ground plane to provide both thermal dissipation and a low-impedance ground reference. Use the device's built-in DMA-free peripheral architecture to reduce interrupt overhead in time-critical applications, and consult Microchip's MPLAB X IDE configuration bits for oscillator and watchdog timer setup. This page synthesizes distributor pricing, drop-in Microchip family alternatives, and practical analog-design notes that are not present in the standalone manufacturer datasheet.

견적 요청 문의하기
PIC24F16KM204-I/PT - 16-bit 32MHz XLP MCU 16KB Flash | Microchip
PIC24F16KM204-I/PT

PIC24F16KM204-I/PT - 16-bit 32MHz XLP MCU 16KB Flash | Microchip

The Microchip Technology PIC24F16KM204-I/PT is a 16-bit PIC24F microcontroller featuring eXtreme Low Power (XLP) technology, 16KB of Flash program memory, 2KB RAM and 512B EEPROM, executing up to 16 MIPS at 32MHz from a 3.3V supply. It is housed in a 44-pin TQFP (10x10 mm) package and integrates a rich analog peripheral set including a 12-bit ADC, an 8-bit DAC, two operational amplifiers and comparators, plus a Configurable Logic Cell (CLC), Capture/Compare/PWM (MCCP/SCCP), and 5-bit DAC and 8-bit DAC. A PIC24F microcontroller is a 16-bit RISC MCU built on a modified Harvard architecture with single-cycle instruction execution, designed for ultra-low-power embedded applications where 8-bit MCUs are too slow but 32-bit parts would over-shoot cost. It sits in the hierarchy: MCU -> microcontroller -> 16-bit MCU -> PIC24F family -> XLP low-power sub-family, and combines deterministic interrupt latency, fast context switching, and rich peripherals suited to consumer, industrial, medical and IoT products. Key differentiating features include: 16 MIPS throughput at 32MHz, deep sleep current of just 25 nA typical with RTCC running, on-chip 12-bit A/D converter with up to 500 ksps throughput, integrated op-amp and 8-bit DAC that eliminate external analog components, and 25 mA source/sink current on I/O. The CLC peripheral lets designers implement custom glue logic in hardware without external gates. Architecturally, the PIC24F16KM204-I/PT uses a 16-bit modified Harvard core with separate program (Flash) and data (RAM) buses, a 17x17 hardware multiplier, and a 32-bit barrel shifter, enabling efficient C code execution and DSP-class operations. The XLP design integrates multiple power domains so that peripherals can run independently while the CPU sleeps, dramatically extending battery life in energy-harvesting or remote-sensor designs. Typical applications include battery-powered IoT sensor nodes, low-power wireless remotes, portable medical devices such as glucose meters and pulse oximeters, capacitive-touch human-interface panels, and small appliance controllers. The wide peripheral mix also supports HVAC sensor conditioning, fan/valve drivers, and smart metering front-ends. Designers should note that the -I/PT suffix denotes the industrial temperature grade (-40C to +85C) and TQFP-44 package. The 44-pin 10x10 mm TQFP simplifies hand prototyping compared to TLFN/MLF variants but consumes more board area, so engineers in space-constrained designs may prefer PIC24F16KM204-I/ML from the same family. This page synthesizes distributor pricing tiers, drop-in alternatives in the same TQFP-44 package, and application design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24F16KM204T-I/MV - 16-bit 32MHz 16KB Flash XLP MCU | Microchip
PIC24F16KM204T-I/MV

PIC24F16KM204T-I/MV - 16-bit 32MHz 16KB Flash XLP MCU | Microchip

The Microchip Technology PIC24F16KM204T-I/MV is a 16-bit PIC microcontroller from the PIC® XLP™ 24F family, featuring a 32 MHz core, 16 KB of Flash program memory (5.5K x 24), 2 KB of RAM, and 512 bytes of EEPROM, all housed in a 48-pin UQFN (MV) package with exposed pad. It is part of the KM family targeted at low-power applications and integrates analog peripherals including a 12-bit ADC, an 8-bit DAC, and operational amplifiers. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of peripherals on one die. Within Microchip's portfolio, the PIC24F family sits in the 16-bit XLP (eXtreme Low Power) tier, with the KM subgroup adding integrated op amps and DACs aimed at sensor-conditioning and mixed-signal designs. This hierarchy places the part between the 8-bit PIC16/PIC18 lines and the 32-bit PIC32MX/dsPIC families. Key features include an industrial-grade operating temperature range of -40 °C to +85 °C, supply voltage support from 1.8 V to 5.5 V, and a flexible peripheral set covering I2C, IrDA, LINbus, SPI, and UART/USART for connectivity, plus MCCP/SCCP timers, configurable logic cells, comparators, and op amps for analog signal chain use. The XLP architecture typically yields deep-sleep currents in the sub-microampere range, enabling battery-powered designs. The architecture is a 16-bit modified Harvard RISC core with a wide 24-bit instruction word, supporting deterministic interrupt latency and a single-cycle hardware multiplier. On-chip analog peripherals are tightly coupled to the bus, reducing BOM and PCB area versus external op-amp + DAC + ADC discrete solutions. Typical applications include IoT sensor nodes, battery-powered instruments, industrial sensor conditioning, portable medical accessories, and low-power consumer devices requiring on-board amplification and conversion without external analog ICs. When designing in, plan the PCB layout around the exposed thermal pad for ground continuity and thermal dissipation, and confirm toolchain support in MPLAB X IDE with the XC16 compiler for firmware development. This page synthesizes distributor stock levels, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping procurement and engineering teams evaluate this part faster.

견적 요청 문의하기
PIC24F32KA301-E/P - 16-bit XLP MCU, 32KB Flash, 20-PDIP | Microchip
PIC24F32KA301-E/P

PIC24F32KA301-E/P - 16-bit XLP MCU, 32KB Flash, 20-PDIP | Microchip

The Microchip Technology PIC24F32KA301-E/P is a 16-bit PIC microcontroller built on the eXtreme Low Power (XLP) technology platform, housed in a 20-pin PDIP (0.300 inch) through-hole package. It integrates 32KB of Flash program memory (11K x 24 words), 2KB of SRAM, and 512 bytes of EEPROM data memory, and executes instructions at up to 32MHz delivering 16 MIPS. The -E temperature grade denotes the -40C to +125C extended operating range suited to industrial and harsh-environment designs. A 16-bit microcontroller (MCU) is a single-chip computer that processes data and instructions in 16-bit chunks, sitting in the hierarchy between 8-bit MCUs (e.g., PIC16, AVR) and 32-bit MCUs (e.g., PIC32, ARM Cortex-M). The PIC24F family occupies the low-power mid-performance tier, optimized for battery-powered and energy-harvesting applications where sleep-mode current dominates total energy budget. XLP devices integrate dedicated low-power peripherals such as the Real-Time Clock and Calendar (RTCC), Deep Sleep BOR (DSBOR), and Deep Sleep WDT (DSWDT) that remain functional while the CPU core is halted. The PIC24F32KA301 features a 12-bit ADC with up to 13 input channels, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight sensing, multiple PWM/OC/Timer modules, and serial interfaces including I2C, SPI, and UART. Its integrated nanoWatt XLP technology targets sleep currents in the deep-sleep range that allow years of operation from a single coin cell. Typical applications include battery-powered sensor nodes, portable medical and fitness devices, e-metering, remote controls, capacitive touch user interfaces, and industrial control nodes. The 20-PDIP package is particularly valued in prototyping, education, and legacy designs where through-hole assembly is preferred for ease of rework. When designing with this MCU, verify Vdd decoupling with a 0.1uF ceramic capacitor adjacent to each power pin and consider the RTCC backup battery requirements if timekeeping through power loss is required. The CTMU requires careful PCB layout and software calibration for stable capacitive touch performance. The combination of XLP sleep performance, integrated EEPROM, and rich peripherals in a DIP package makes the PIC24F32KA301-E/P a popular choice for low-power embedded designs requiring easy through-hole prototyping. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24F32KA301-E/SO - 16-bit 32MHz XLP MCU 32KB Flash SOIC-20 | Microchip
PIC24F32KA301-E/SO

PIC24F32KA301-E/SO - 16-bit 32MHz XLP MCU 32KB Flash SOIC-20 | Microchip

The Microchip Technology PIC24F32KA301-E/SO is a 16-bit microcontroller featuring eXtreme Low Power (XLP) consumption, 32KB of Flash program memory, 2KB of RAM, 512 bytes of EEPROM, and a 12-bit ADC with CTMU, housed in a 20-pin SOIC package rated -40C to +125C for the industrial automotive-grade (E) temperature range. The PIC24F32KA301-E/SO is part of the PIC® XLP™ 24F microcontroller series and runs up to 32MHz delivering 16 MIPS, balancing computational throughput with very low active and sleep currents. A 16-bit microcontroller (MCU) is an embedded processor with a 16-bit data path, sitting between 8-bit MCUs (lower cost, lower performance) and 32-bit MCUs (higher performance, higher cost). 16-bit MCUs occupy the power-management sweet spot for applications requiring real-time deterministic peripherals (12-bit ADC, comparators, timers, RTCC), more code space than 8-bit parts, and lower cost than Cortex-M0+ alternatives. Within the taxonomy, the PIC24F32KA301 belongs to the PIC24 family (16-bit), the PIC24F sub-family (Flash, low-power), the PIC24FKA series (XLP nano-watt), and ultimately the broader MCU -> microcontroller -> embedded processor -> semiconductor hierarchy. Key features include XLP nanoWatt technology with Deep Sleep mode currents in the nanoamp range, RTCC, DSBOR (Deep Sleep Brown-Out Reset), and DSWDT (Deep Sleep Watchdog Timer) that remain active in Deep Sleep for industry-leading low power performance. The device supports 3V and 5V operation, includes a 12-bit A/D converter with CTMU (Charge Time Measurement Unit) for capacitive touch and precise time measurement, multiple UART/SPI/I2C peripherals, and up to 18 I/O pins. The E suffix indicates the -40C to +125C industrial/automotive temperature range. Architecturally, the PIC24F32KA301 uses a modified Harvard architecture with separate program and data buses, a 16-bit instruction word, and a wide variety of low-power modes. The XLP technology integrates Deep Sleep peripherals (DSBOR, DSWDT, RTCC) that operate below 1 uA, enabling years of battery life from a single coin cell in sleep-dominant applications such as wireless sensor nodes, utility metering, and IoT edge devices. Typical applications include battery-powered IoT sensor endpoints, low-energy wireless sensor nodes, medical wearable monitors, portable instrumentation, and remote controls. The wide temperature range also supports industrial sensor interface modules and automotive body electronics. When designing with the PIC24F32KA301-E/SO, consider the trade-off between pin count (20-SOIC limits I/O to ~18) and feature set. For designs requiring more I/O or larger memory, the PIC24F32KA302/304 family or dsPIC33 alternatives are pin-compatible migration paths within the same footprint family. This page synthesizes distributor stock and pricing, drop-in alternatives, and practical design considerations not found in the manufacturer datasheet alone, providing an engineering-oriented decision resource for component selection.

견적 요청 문의하기
PIC24F32KA301-I/P - 32KB Flash 16-bit XLP MCU | Microchip
PIC24F32KA301-I/P

PIC24F32KA301-I/P - 32KB Flash 16-bit XLP MCU | Microchip

The Microchip PIC24F32KA301-I/P is a 16-bit flash microcontroller from the PIC24F XLP (eXtreme Low Power) family, featuring 32 KB of self-programmable Flash program memory, 2 KB of RAM, 512 bytes of EEPROM, and a 12-bit A/D converter with CTMU (Charge Time Measurement Unit). Housed at 20-pin PDIP (0.300 inch, 7.62 mm wide through-hole package), it operates at up to 32 MHz delivering 16 MIPS instruction throughput from a 1.8 V to 3.6 V supply. According to the Microchip PIC24F32KA301 datasheet (DS30009906 family), it integrates the CIP (Core Independent Peripherals) set including DSBOR, DSWDT, and RTCC, all of which remain active in Deep Sleep mode to achieve industry-leading nanoWatt power consumption. Background - What is a PIC24F 16-bit MCU? The PIC24F is a 16-bit microcontroller family within Microchip's broader PIC microcontroller portfolio, sitting between the 8-bit PIC16/PIC18 line and the 32-bit PIC32 line. XLP is Microchip's eXtreme Low Power technology umbrella, an architecture for battery-powered and energy-harvesting applications where sleep-mode current draw is the dominant figure of merit. The hierarchy: PIC24F -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. PIC24F devices target portable instrumentation, sensor nodes, and consumer products requiring more peripherals and code space than 8-bit MCUs but lower cost and power than ARM Cortex-M parts. Key features of the PIC24F32KA301-I/P include six 16-bit timers, four PWM modules with independent time bases, three UART/SPI/I2C modules, up to 25 mA source/sink on I/O pins, and a Charge Time Measurement Unit (CTMU) for capacitive touch and temperature sensing. The XLP architecture achieves Deep Sleep currents down to 20 nA typical with brown-out reset and watchdog timer operational, and Run current around 190 uA/MHz at 2 V. The device uses a Harvard architecture modified-RISC CPU executing 76 instructions with three-stage pipeline. The single-cycle hardware multiplier accelerates DSP-style math, and a 32x32-bit hardware divider is shared with select peripherals. The integrated 12-bit ADC has up to 9 channels (depending on package), 100 ksps conversion rate, and automatic scan modes for sequential conversion. The CTMU produces a constant current source used for capacitive touch button and slider decoding as well as precision time measurement. Typical applications include battery-powered IoT sensor nodes, portable medical devices such as glucose meters and pulse oximeters, capacitive touch user interfaces for appliances and consumer electronics, real-time-clock-based data loggers, and low-power wireless sensor nodes interfacing to sub-GHz transceivers. The 20-pin DIP form factor is favored for breadboard prototyping, educational platforms, and industrial control retrofits where through-hole mounting is required. Design consideration - XLP parts require careful attention to wake-up latency, GPIO state retention during Deep Sleep, and peripheral library configuration. Use the MPLAB X IDE with the MPLAB XC16 compiler and MPLAB Code Configurator (MCC) for fastest bring-up. For lowest sleep current, disable unused peripherals via PMD (Peripheral Module Disable) registers and use the Deep Sleep mode with DSBOR enabled. For capacitive touch applications, the CTMU requires precise timing calibration via the ADC reference - see Microchip application note AN94. Pin-compatible SOIC variants (PIC24F32KA301-I/SO) and tape-and-reel SOIC (PIC24F32KA301T-I/SO) are available for reflow assembly. This page synthesizes distributor pricing, drop-in PIC24F32KA3xx family alternatives, and XLP-mode design notes that are not gathered in a single location in the Microchip datasheet.

견적 요청 문의하기
PIC24F32KA301-I/SO - 16-bit 32MHz 32KB Flash XLP MCU | Microchip
PIC24F32KA301-I/SO

PIC24F32KA301-I/SO - 16-bit 32MHz 32KB Flash XLP MCU | Microchip

The Microchip Technology PIC24F32KA301-I/SO is a 16-bit PIC microcontroller in the PIC24F XLP family with eXtreme Low Power technology, packaged in a 20-pin SOIC (300 mil). It integrates 32KB of Flash program memory, 2KB of SRAM, and 512B of EEPROM, and runs at up to 32 MHz (16 MIPS) from a 1.8-3.6V supply. The device is designed for power-constrained and battery-powered applications and includes peripherals such as a 12-bit ADC, CTMU (Charge Time Measurement Unit), DSBOR, DSWDT, and a Real-Time Clock/Calendar that continues to operate in Deep Sleep mode. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), non-volatile data storage (EEPROM), and a rich set of peripherals (ADC, timers, communication controllers) into one package. The PIC24F belongs to the modified Harvard RISC architecture family from Microchip and sits between 8-bit PIC16/PIC18 devices and the more powerful dsPIC33/PIC32 lines, offering 16-bit data paths, single-cycle multiply, and a deterministic instruction set optimized for low-power embedded control. Key features include nanoWatt XLP technology with Deep Sleep currents drawn in the microampere range, a 12-bit A/D converter with multiple channels, multiple serial interfaces (UART, SPI, I2C), and a Charge Time Measurement Unit for capacitive touch sensing and precise time-of-flight measurements. The wide 1.8V to 3.6V VDD range supports both 3V lithium and 2x AA battery chemistries without level shifters, and the internal 8 MHz and 32 kHz oscillators reduce external component count. The 20-pin SOIC footprint offers the largest I/O count in this family while remaining hand-solderable for prototypes and low-volume production. The architecture combines a 16-bit modified Harvard RISC core with a 24-bit instruction word, 17 x 17-bit single-cycle hardware multiplier, and a 32-bit barrel shifter, delivering 16 MIPS throughput while drawing only microampere-level active current. The Deep Sleep state retains RAM and runs the RTCC, DSBOR and DSWDT, allowing wake-up intervals of seconds to months on a single coin cell. The CTMU provides a precise current source for capacitive touch and resistive sensing without an external analog front end. Typical applications include blood pressure monitors, fitness wearables, remote sensor nodes, smart thermostats, IoT endpoints, and any portable medical or industrial sensor. The combination of eXtreme Low Power, 32 KB Flash, 12-bit ADC, and CTMU makes it particularly well suited to capacitive-touch user interfaces and battery-powered measurement products. The 20-pin SOIC package allows easy hand-soldering and rework, simplifying prototyping and field-repair scenarios. When designing with this device, choose low-Iq LDO or use direct battery connection, route the analog AVdd/AVss pins with a star ground topology, and place the CTMU current-source traces away from switching nodes to preserve touch sensitivity. For longest battery life, prefer Deep Sleep over Idle and gate peripherals individually using PMD registers rather than software polling loops. This page synthesizes distributor pricing, same-family Microchip drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24F32KA301-I/SS - 16-bit XLP 32KB Flash MCU, 20-SSOP | Microchip
PIC24F32KA301-I/SS

PIC24F32KA301-I/SS - 16-bit XLP 32KB Flash MCU, 20-SSOP | Microchip

The Microchip Technology PIC24F32KA301-I/SS is a 16-bit microcontroller from the PIC24F XLP (eXtreme Low Power) family, integrating 32KB of Flash program memory (11K x 24 words), 2KB of RAM, and 512 bytes of EEPROM in a 20-pin SSOP package. It operates at up to 32 MHz (16 MIPS) from a 1.8V to 3.6V supply, and is positioned for power-constrained and battery-powered embedded designs where sleep-mode current is a primary constraint. Core integrated peripherals include a 12-bit ADC, a Charge Time Measurement Unit (CTMU), multiple timers, and the XLP peripheral set (DSBOR, DSWDT, RTCC) that continues to operate during Deep Sleep. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and configurable peripherals on one die. The PIC24F family uses a 16-bit modified Harvard architecture with a 24-bit instruction word, giving higher code density than 8-bit MCUs while staying cheaper and lower-power than most 32-bit Cortex-M parts. The "F" suffix denotes Flash program memory; XLP is Microchip's branding for nanoWatt eXtreme Low Power techniques such as Deep Sleep, Sleep, Idle, and alternate clock modes. Within the power-management IC hierarchy, this MCU sits above simple voltage regulators but below application processors, providing intelligent control for sensors, displays, and low-rate RF interfaces. Key features of the PIC24F32KA301-I/SS include industry-leading Deep Sleep current (typical values in the nanoamp-to-low-microamp range), 16 MIPS throughput at 32 MHz, an integrated CTMU for capacitive touch or precise time-of-flight measurement, a 12-bit A/D converter with multiple input channels, and multiple serial interfaces (UART, SPI, I2C). The device supports on-chip debugging via two programming/debug pins and is firmware-compatible across the PIC24F K-series, allowing easy migration between pin counts and memory sizes. Typical applications include battery-powered sensor nodes, wearable health monitors, remote controls, low-power wireless sensor networks, e-paper/e-ink display controllers, and IoT edge nodes. The 20-SSOP footprint is well suited to compact handheld products where board area is at a premium. The CTMU peripheral is particularly attractive for implementing touch buttons, sliders, or proximity sensing without external analog ICs, reducing BOM cost and quiescent drain. Designers should follow Microchip's recommended decoupling practice (typically a 0.1 µF ceramic plus a bulk capacitor near VDD) and consult the device-specific datasheet for the exact Deep Sleep current at the chosen VDD and temperature. For firmware reuse and migration paths, review the PIC24F KA/KM family reference manual; this part is part of a broader pin-compatible family ranging from 20 to 48 pins. This page synthesizes distributor pricing, drop-in alternatives, pinout, and practical design notes for the PIC24F32KA301-I/SS that are not consolidated in any single manufacturer document.

견적 요청 문의하기
PIC24F32KA301T-I/SO - 32KB Flash 16-bit XLP MCU | Microchip
PIC24F32KA301T-I/SO

PIC24F32KA301T-I/SO - 32KB Flash 16-bit XLP MCU | Microchip

The Microchip PIC24F32KA301T-I/SO is a 16-bit PIC XLP 24F microcontroller running at 32 MHz, integrating 32 KB Flash program memory, 2 KB SRAM, and 512 bytes of EEPROM in a 20-pin SOIC package. The device operates from 1.8 V to 3.6 V, supports 17 I/O ports, and delivers 16 MIPS performance with eXtreme Low Power (XLP) technology targeting battery-powered applications. A 16-bit microcontroller (MCU) is a programmable processor core with a 16-bit data path, register file, and instruction set, sitting between 32-bit application processors and 8-bit MCUs in the embedded hierarchy. The PIC24F family is Microchip's mid-range 16-bit line, bridging the PIC16/18 8-bit families and the dsPIC/PIC32 32-bit lines, and is widely deployed in consumer, industrial, sensor, and medical products where low power and moderate compute throughput are required. Key features of this device include a 12-channel 12-bit A/D converter with CTMU support for capacitive touch sensing, 5 CCP/ECCP modules for PWM/capture/compare, multiple timers, UART/SPI/I2C peripherals, deep-sleep brown-out reset (DSBOR), deep-sleep watchdog timer (DSWDT), and a real-time clock/calendar (RTCC) that operates in deep sleep. XLP technology enables nanoWatt deep sleep currents, making the part suitable for energy-harvesting and battery-life-critical designs. The architecture is a modified Harvard 16-bit RISC core with a 24-bit instruction word, 17x17 hardware multiplier, and C-friendly instruction set. The CMOS process and low-leakage design give active currents around 8 mA at 32 MHz and deep-sleep currents below 100 nA with RTCC active, which is critical for products with multi-year battery life targets. Typical applications include wearable fitness bands, IoT sensor nodes, low-power wireless metering, capacitive touch user interfaces, portable medical monitors, and remote-control HMIs. The 20-pin SOIC footprint enables retrofits of legacy 8-bit PIC designs where more code space and higher MIPS are needed without a PCB change. Industrial and consumer segments also use this part for white goods, sensor hubs, and BLE-proxied accessories. When designing with this MCU, budget 2 KB of SRAM carefully: deep stack usage or large string formatting can quickly exhaust it. For ultra-low standby targets, use the RTCC-alarm wake path (deep sleep + DSBOR/DSWDT) and disable unused peripherals via PMD registers to keep quiescent current under 1 uA. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers an AEO-optimized decision capsule beyond the standard product listing.

견적 요청 문의하기
PIC24F32KA301T-I/SS - 16-bit XLP MCU, 32KB Flash, 20-SSOP | Microchip
PIC24F32KA301T-I/SS

PIC24F32KA301T-I/SS - 16-bit XLP MCU, 32KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC24F32KA301T-I/SS is a 16-bit PIC microcontroller from the PIC24F XLP family, featuring 32 KB of Flash program memory (11K x 24 words), 2 KB of SRAM, 512 bytes of EEPROM, and a maximum CPU clock of 32 MHz delivering up to 16 MIPS, packaged in a 20-pin SSOP (0.209 inch / 5.30 mm body width). The device is engineered around Microchip's eXtreme Low Power (XLP) technology, including nanoWatt XLP peripherals such as DSBOR, DSWDT and RTCC that continue operating in Deep Sleep, making it purpose-built for battery-powered and energy-harvesting designs. What is an XLP microcontroller? An XLP (eXtreme Low Power) MCU is a class of microcontroller that integrates ultra-low-power peripherals - real-time clock/calendar, brown-out reset, watchdog timer, and deep-sleep wake sources - so that quiescent current can be held in the nanoampere range while still maintaining timing and supervisory functions. Within the broader taxonomy, the PIC24F32KA301 sits under 16-bit MCU -> Flash MCU -> low-power MCU -> Microchip PIC24F XLP family -> general purpose 20-/28-/44-/48-pin sub-family. Key features include a 12-bit A/D converter with CTMU (Charge Time Measurement Unit) for capacitive touch and time-of-flight sensing, multiple communication peripherals (UART, SPI, I2C), 17 I/O ports, and an operating voltage range of 1.8 V to 3.6 V. The architecture is a 16-bit modified Harvard with a rich instruction set optimized for C code density, plus hardware multiply/divide and DSP-friendly instructions. The 'T' suffix indicates Tape & Reel packaging and the 'I' suffix denotes the -40C to +85C industrial temperature grade; the 'SS' suffix denotes the SSOP-20 package. Typical applications span consumer IoT nodes, sensor hubs, remote controls, wearable health patches, and any line-powered or battery-operated embedded product that demands long battery life without sacrificing computational throughput.

견적 요청 문의하기
PIC24F32KA302-E/ML - 32KB Flash XLP 16-bit MCU 28-QFN | Microchip
PIC24F32KA302-E/ML

PIC24F32KA302-E/ML - 32KB Flash XLP 16-bit MCU 28-QFN | Microchip

The Microchip Technology PIC24F32KA302-E/ML is a 16-bit PIC24F microcontroller featuring eXtreme Low Power (XLP) technology, 32KB of Flash program memory, 2KB of SRAM, and 512 bytes of EEPROM, housed in a 28-pin QFN (6x6 mm) package. It operates at up to 32MHz delivering 16 MIPS performance, integrating peripherals such as a 12-bit ADC with up to 13 input channels, three comparators, three PWM channels, seven timers, and the Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The wide operating voltage range of 1.8V to 5.5V supports both 3.3V and 5V designs from a single part. A microcontroller (MCU) is a compact integrated circuit containing a processor core, program and data memory, and programmable peripherals. The PIC24F family is built on a 16-bit modified Harvard RISC architecture optimized for low-power embedded control. Within Microchip's XLP lineup, the PIC24F32KA302 is positioned for battery-powered and energy-harvesting applications where quiescent current, deep-sleep retention, and fast wake-up determine battery lifetime. Key features of this part include eXtreme Low Power technology with deep-sleep current below 1 uA, a Real-Time Clock Calendar (RTCC) that runs in Deep Sleep, dedicated Deep Sleep Brown-Out Reset (DSBOR) and Deep Sleep Watchdog Timer (DSWDT) blocks, and integrated USB 2.0 full-speed device support on selected variants. The CTMU enables capacitive touch sensing for buttons, sliders, and proximity detection without an external touch controller, reducing BOM cost and PCB area in human-interface designs. The architecture combines a 16-bit data path with a 24-bit instruction word, providing deterministic execution and C-compiler efficiency. A peripheral pin-select (PPS) mapper allows digital peripherals to be remapped to a wide choice of I/O pins, simplifying PCB routing. The 12-bit ADC supports both single-ended and differential conversions, and the comparators can wake the core from sleep, making the device suitable for sensor-driven interrupt architectures. Typical applications include portable medical devices, wearable fitness bands, IoT sensor nodes, capacitive touch user interfaces, smart thermostats, USB peripherals, and battery-backed industrial sensor transmitters. The CTMU and XLP deep-sleep modes make it a strong fit when average current budget is the primary design constraint. When designing with this device, pay attention to the maximum 32MHz core clock and the resulting 16 MIPS throughput; peripheral clocking derives from the same source. For capacitive touch applications, follow the CTMU layout guidelines from the datasheet and provide a guard trace around the touch electrodes to suppress moisture false triggers. This page synthesizes distributor pricing, drop-in PIC24F family alternatives, and practical design notes that go beyond the manufacturer datasheet.

견적 요청 문의하기