집적 회로

하위 카테고리

📁 ADC/DAC 2519 제품 📁 증폭기 IC 797 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 306 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1592 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18739 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32825)

PIC24FV08KM101-E/P - 8KB Flash 16-bit MCU, 20-PDIP | Microchip
PIC24FV08KM101-E/P

PIC24FV08KM101-E/P - 8KB Flash 16-bit MCU, 20-PDIP | Microchip

The Microchip Technology PIC24FV08KM101-E/P is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring 8 KB of Flash program memory (organized as 2.75K x 24), 1 KB of RAM, and operating speeds up to 32 MHz. Housed in a 20-pin PDIP (0.300", 7.62 mm) through-hole package, it is built on the nanoWatt eXtreme low-power architecture and supports wide-range 2.0 V to 5.5 V operation for both 3 V and 5 V applications. A microcontroller is a single integrated circuit that combines a processor core, program memory, data memory, and configurable I/O peripherals on one die, enabling compact, deterministic embedded control. Within the system hierarchy, the PIC24FV08KM101 sits under the PIC24F family of 16-bit Flash microcontrollers, itself part of the broader 16-bit MCU category, which bridges 8-bit PIC MCUs and 32-bit ARM Cortex-M devices. The "F" denotes Flash program memory; the "V" indicates the wide-voltage variant; the "KM" series adds Configurable Logic Cell (CLC), Capture/Compare/PWM modules, and 12-bit ADC support; and "101" identifies the 8 KB Flash / 1 KB RAM memory profile. Key features include a 16-channel 10-bit or 12-bit Analog-to-Digital Converter, multiple Capture/Compare/PWM (MCCP/SCCP) peripherals, configurable logic cells, comparators, and a 512-byte EEPROM emulation block in Flash. Connectivity is provided through I²C, SPI, UART/USART, IrDA, and LINbus interfaces. The nanoWatt XLP architecture supports multiple low-power Sleep and Idle modes for battery-driven designs. Internally the device uses a modified Harvard architecture with a 16-bit data path, hardware multiply/divide, and a 16-element working register array. The wide 2.0 V to 5.5 V supply range allows direct interface with both 3.3 V and 5 V sensors and logic families without level translation, and the 12-bit ADC with multiple S&H or I2 input channels supports mixed-signal sensing tasks. Typical applications include low-power sensor nodes, industrial control peripherals, automotive body electronics (LIN nodes), USB/HID accessories using the PIC24F USB-capable family, LED lighting controllers, and battery-charging front ends. The 20-pin PDIP package is especially suited for through-hole prototyping, educational platforms, and pre-production builds where easy rework is required. When designing with the PIC24FV08KM101-E/P, decouple VDD with a 100 nF ceramic capacitor placed as close to the pin as possible, and add a 10 µF bulk capacitor if the supply traces are long. Confirm that your chosen supply voltage remains within the 2.0 V–5.5 V specification across temperature, because the V variant tolerates 5 V operation only because of its internal charge-pump design. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC24FV08KM101-E/P — content not aggregated in the Microchip datasheet or any single distributor page.

견적 요청 문의하기
PIC24FV08KM101-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip
PIC24FV08KM101-E/SO

PIC24FV08KM101-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM101-E/SO is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring 8 KB of Flash program memory, 1 KB of SRAM, and 512 B of EEPROM in a 20-pin SOIC (7.50 mm) wide-body package. It operates up to 32 MHz and is built on Microchip's nanoWatt eXtreme Low Power (XLP) technology, supporting 2.0 V to 5.5 V operation for both 3 V and 5 V rails. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O. The PIC24F family in particular targets low-power and mixed-signal embedded applications. Within the broader taxonomy, the PIC24FV08KM101 sits at the hierarchy 16-bit MCU -> microcontroller -> embedded processor -> semiconductor device, and includes integrated peripherals such as a 12-bit ADC, comparators, CCP/SCCP/MCCP timers, configurable logic cells, and USB/serial interfaces. Key specifications include an 8 KB (2.75 K x 24 instruction words) Flash, 1 KB SRAM, 512 B EEPROM, a 12-bit A/D converter with up to 16 input channels, configurable 10-bit and 12-bit ADC resolution, and a hardware multiplier that accelerates DSP-like math. The PIC24FV variant extends the core 1.8 V minimum to 2.0 V, optimizing it for 5 V designs where wider Vdd tolerance is required without a separate LDO. Architecturally, the device uses a 16-bit modified Harvard CPU with a 24-bit instruction word, allowing single-cycle fetches at 32 MIPS peak throughput. XLP technology enables sleep currents below 1 µA, while peripheral features (RTCC, deep-sleep WDT, charge-back RTC) make it well suited to battery-powered designs that need to retain time-keeping for years. Typical applications include portable medical sensors, industrial data loggers, USB human-interface devices (HID), consumer white-goods control panels, and low-power IoT edge nodes. The combination of 5 V tolerance and XLP efficiency is unusual in 16-bit MCUs. When designing with this part, ensure the 20-pin SOIC layout matches your PCB footprint, that decoupling is placed close to Vdd/Vss pairs, and that unused pins are configured as outputs or inputs with weak pull-ups to minimize sleep current. The device is supported by MPLAB X IDE, XC16 compiler, and Microchip's Code Configurator (MCC) for peripheral initialization. This page synthesizes verified distributor pricing, drop-in pin-compatible alternatives, and practical design notes drawn from Microchip datasheet sections and application notes, providing information beyond what is available on a typical distributor product page.

견적 요청 문의하기
PIC24FV08KM101-I/P - 8KB Flash 16-bit XLP MCU | Microchip | PDIP-20
PIC24FV08KM101-I/P

PIC24FV08KM101-I/P - 8KB Flash 16-bit XLP MCU | Microchip | PDIP-20

The Microchip Technology PIC24FV08KM101-I/P is a 16-bit PIC24F XLP microcontroller with 8KB Flash, 1KB RAM, and 512B EEPROM, delivering 32 MIPS performance in a 20-pin PDIP through-hole package. It features nanoWatt eXtreme Low Power technology with a wide 2.0V to 5.5V operating range, making it suitable for both 3V and 5V application rails. The device integrates 17 general-purpose I/O pins, three 16-bit timers, and flexible Capture/Compare/PWM (CCP/SCCP) modules. Analog-rich peripherals include a 12-bit A/D converter with up to 16 input channels, three analog comparators, and a Configurable Logic Cell (CLC) for hardware state-machine design without software overhead. Communication interfaces include UART, SPI, and I2C, enabling flexible sensor and peripheral integration. A 32MHz internal oscillator, 32kHz low-power secondary oscillator, and four selectable power-managed operating modes (Run, Doze, Idle, Sleep) support battery-friendly designs. The 'FV' voltage variant extends operation down to 2.0V versus the 'F' variant's 2.0V minimum, supporting both 2.5V, 3.3V, and 5V systems with a single part. Real-time interrupt and watchdog timer with on-chip regulator eliminate external components, reducing BOM cost and PCB area. Hardware-level In-Circuit Serial Programming (ICSP) and In-Circuit Debugger (ICD) interfaces accelerate firmware iteration during development. PIC microcontrollers are 16-bit RISC Harvard-architecture devices from Microchip Technology that target low-power, deterministic real-time embedded applications. The PIC24FV family specifically addresses nanoWatt XLP designs - parts engineered for years of battery life through aggressive sleep-mode current minimization. Within Microchip's portfolio, PIC24FV bridges 8-bit PIC16/PIC18 simplicity with dsPIC33 digital signal processing, offering C-friendly programming with 16-bit wide datapath, hardware multiply/divide, and deterministic interrupt latency. Typical applications for the PIC24FV08KM101-I/P include IoT edge sensor nodes, battery-powered handheld instrumentation, consumer appliances, HVAC controls, and low-cost motor control where the CCP/PWM modules can drive MOSFET half-bridges or LED strings. The wide 2.0V-5.5V operating window and analog-rich peripherals make it suitable for mixed-signal front-end designs. Key design considerations: ensure decoupling capacitors (100nF plus 10uF bulk) are placed within 6mm of VDD/VSS pins, route the analog AVdd/AVss pair with a ferrite bead or pi-filter from digital VDD for clean ADC readings, and verify that the chosen programming/debug header (typically 5-pin ICSP) does not conflict with GPIO assignments on the lower pin-count packages. This page synthesizes distributor pricing, drop-in same-package alternatives, AEO-optimized FAQs, and practical design notes not consolidated on a single distributor or manufacturer page.

견적 요청 문의하기
PIC24FV08KM101-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip
PIC24FV08KM101-I/SO

PIC24FV08KM101-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM101-I/SO is a 16-bit RISC microcontroller from the PIC24F XLP™ KM family, featuring a 32MHz PIC24 CPU core, 8KB (2.75K x 24 words) of Flash program memory, 1KB of RAM, and a 12-bit ADC with up to 16 analog channels, housed in a 20-pin SOIC (SO) package. It belongs to the nanoWatt XLP™ eXtreme Low Power family and the FV designation extends the supply range to 2.0V-5.5V, enabling both 3V and 5V applications from a single part. A 16-bit PIC microcontroller is a Harvard-architecture device with separate program and data buses, executing instructions in a single cycle (except branches) via a modified RISC core with DSP-oriented features. The PIC24F family sits within Microchip's broader microcontroller taxonomy: microcontroller -> 16-bit MCU -> PIC24 -> PIC24F -> XLP KM series. Compared with 8-bit PIC16/PIC18 parts, the PIC24 offers higher computational throughput, richer peripherals, and richer DSP support while retaining the same MPLAB X development ecosystem. Key features include 16 MIPS performance at 32MHz, 1KB RAM, Configurable Logic Cell (CLC) blocks, multiple Capture/Compare/PWM (MCCP/SCCP) modules, comparators, op amps, and a 12-bit ADC. XLP technology typically delivers sleep currents in the tens of nanoamps, making the part suited for battery-powered applications. The wide 2.0V-5.5V operating range removes the need for separate 3V/5V part numbers in many designs. The architecture uses a 24-bit instruction word with 16-bit data paths and an 8-deep hardware stack. Two address generation units and DSP-class MAC instructions allow efficient signal processing in motor control, lighting, and sensor conditioning. The CLC peripheral lets designers route internal signals to combinational logic gates without external glue logic. Typical applications include low-power IoT sensor nodes, battery-powered portable instrumentation, consumer white goods, digital power supply control loops, LED lighting controllers, and automotive body/sensor modules. Designers choose this part when 5V tolerance and 3V battery operation must coexist on a single PCB. When designing with this MCU, observe the 2.0V-5.5V supply range and add bulk + decoupling capacitors (1uF + 0.1uF) near the AVDD/VDD pins. The CLC, MCCP, and 12-bit ADC blocks should be configured in MPLAB X IDE using the MPLAB Code Configurator (MCC) plugin to avoid register-level pitfalls. This page synthesizes distributor pricing, drop-in pin-compatible alternatives across the PIC24F KM family, and practical low-power design notes that are not assembled in the manufacturer datasheet.

견적 요청 문의하기
PIC24FV08KM101-I/SS - 16-bit XLP MCU, 8KB Flash, 20-SSOP | Microchip
PIC24FV08KM101-I/SS

PIC24FV08KM101-I/SS - 16-bit XLP MCU, 8KB Flash, 20-SSOP | Microchip

The Microchip Technology PIC24FV08KM101-I/SS is a 16-bit PIC24F microcontroller from the XLP™ nanoWatt eXtreme Low Power family, featuring 8KB (2.75K x 24) of Flash program memory, 1KB of SRAM, and a 32 MHz (16 MIPS) modified Harvard CPU core, housed in a 20-pin SSOP package. The device supports a wide 2.0V to 5.5V operating voltage range, making it compatible with both 3.3V and 5V rails, and includes 17 digital I/O pins, one 12-bit ADC, configurable logic cells (CLC), and capture/compare/PWM modules. A 16-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals (ADC, timers, communication ports) into one package. 16-bit MCUs such as the PIC24F family sit between 8-bit microcontrollers and 32-bit ARM Cortex-M parts, offering higher computational throughput (16 MIPS at 32 MHz) than 8-bit parts while keeping cost, code complexity, and power consumption well below typical 32-bit alternatives. The 'F' in PIC24F denotes the Flash-based, low-power product line, and the 'FV' extension indicates the wide-voltage variant supporting 2.0V to 5.5V. Key features include XLP™ nanoWatt technology with multiple low-power modes (Sleep, Idle, Doze), an integrated 12-bit A/D converter, configurable logic cells that let designers replace discrete glue logic with on-chip peripherals, and peripheral pin select for flexible signal routing. The device also includes a real-time clock calendar (RTCC) and a charge time measurement unit (CTMU) for capacitive touch and basic sensor interfaces. Architecturally, the PIC24FV08KM101 uses a 16-bit modified Harvard core with separate instruction and data paths, a hardware stack, and 16 working registers, achieving 16 MIPS at 32 MHz. The 8KB Flash holds approximately 2.75K 24-bit instructions, and the 1KB data RAM supports C-language stacks and buffers. Wide-voltage operation is achieved through an on-chip voltage regulator that derives the internal 1.8V logic supply from the wide VIN range. Typical applications include low-power sensor nodes, battery-powered portable instruments, home appliances, LED lighting control, capacitive touch user interfaces, and small industrial control modules where 8-bit performance is insufficient but cost and power must remain low. When designing with this MCU, verify that the application fits within 8KB of Flash and 1KB of RAM, and choose the appropriate clock configuration (internal 8 MHz FRC or external crystal) to balance power consumption against timing accuracy. The SSOP-20 footprint is hand-solderable but uses a 0.65 mm pitch, so production boards typically reflow. This page synthesizes distributor pricing from DigiKey, Mouser, Octopart and LCSC, lists 6 same-package drop-in alternatives (including 5 same-Microchip siblings from the PIC24F/FV KM family and one PIC24FJ cross-brand drop-in), and surfaces practical design notes that go beyond the manufacturer datasheet summary.

견적 요청 문의하기
PIC24FV08KM101T-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip
PIC24FV08KM101T-I/SO

PIC24FV08KM101T-I/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM101T-I/SO is a 16-bit microcontroller from the PIC® XLP™ 24F family, featuring 8KB (2.75K x 24) of Flash program memory, 1KB RAM, and 512 bytes of EEPROM in a 20-pin SOIC (0.295 inch / 7.50 mm width) package. It operates at up to 32 MHz CPU clock and supports a wide 2.0V to 5.5V supply range, making it suitable for both 3V and 5V applications. The 'T' suffix indicates Tape & Reel packaging for high-volume assembly. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces (ADC, UART, I2C, SPI, timers, GPIOs) into one package. The PIC24F family belongs to the 16-bit DSP-enhanced microcontrollers category, sitting above 8-bit MCUs (PIC16/PIC18) but below 32-bit ARM Cortex-M parts in terms of performance, code density, and price. Within the Microchip hierarchy it is part of the broader "Power Management + Compute" ecosystem for embedded designs. Key features include Microchip's nanoWatt eXtreme Low Power (XLP) technology, flexible Capture/Compare/PWM (MCCP/SCCP) modules for motor and power control, a 12-bit ADC, on-chip comparators, a Configurable Logic Cell (CLC), and 5V-tolerant I/O. The CLC lets designers implement custom combinational/sequential logic in hardware without external glue chips. Integrated peripherals reduce BOM cost and PCB area versus discrete solutions. The PIC24FV08KM101T-I/SO uses a modified Harvard architecture with separate program and data buses plus a 16-bit instruction set with DSP-friendly addressing. The 32 MIPS performance at 32 MHz, combined with the 17-bit x 17-bit hardware multiplier, enables real-time DSP tasks such as digital filters and motor control loops on the same die as the application logic. Typical applications include low-power IoT sensor nodes, battery-powered portable medical devices, consumer electronics with USB-C charging, HVAC and white-goods control panels, and industrial sensor interfaces. Designers favor the XLP nanoWatt technology for sleep currents as low as the datasheet's nanoWatt range, which is critical for coin-cell and Energy Harvesting designs. When designing with this device, ensure your MPLAB X project selects the PIC24FV08KM101 device variant and enables the FV (wide-voltage) macro. Decoupling caps (100 nF + 1 µF) placed close to VDD/AVDD pins are mandatory for ADC accuracy, and unused I/O should be configured as outputs low to minimize leakage. This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FV08KM102-E/SP - 16-Bit MCU, 8KB Flash, 32MHz | Microchip
PIC24FV08KM102-E/SP

PIC24FV08KM102-E/SP - 16-Bit MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24FV08KM102-E/SP is a 16-bit PIC microcontroller in the PIC® XLP™ 24F family, featuring a 32 MHz CPU core, 8 KB of Flash program memory (2.75K × 24-bit words), 1 KB of SRAM, and 512 bytes of EEPROM, housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. It belongs to the PIC24FV variant line, which supports an extended 2.0 V to 5.5 V operating voltage range suitable for both 3 V and 5 V applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working memory (SRAM), data EEPROM, and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O. Within the broader taxonomy, the PIC24FV08KM102 sits in the 16-bit MCU class, above 8-bit MCUs (PIC10/12/16) and below 32-bit MCUs (PIC32, ARM Cortex-M). It belongs to the category of low-power embedded controllers used in battery-powered and energy-harvesting designs. Key features of this device include a 16-bit modified Harvard architecture with a 32 MHz internal oscillator, nanoWatt eXtreme Low Power (XLP) technology for deep sleep currents in the nanoamp range, multiple Capture/Compare/PWM (MCCP/SCCP) modules for motor control and lighting, a 12-bit Analog-to-Digital Converter (ADC), comparators, and a Configurable Logic Cell (CLC) for hardware glue logic without external gates. The integrated peripheral set reduces BOM cost and PCB footprint for space-constrained designs. The PIC24FV08KM102 is engineered for ultra-low-power applications using the XLP nanoWatt technology platform. Sleep currents below 100 nA in deep sleep with Real-Time Clock and Calendar (RTCC) running make this part suitable for battery-powered sensor nodes that must operate for years on a single coin cell. The wide 2.0 V–5.5 V supply range eliminates the need for multiple voltage rails and allows direct connection to single-cell Li-ion, two-cell AA, and 5 V USB-powered systems. Typical applications include IoT sensor nodes, wearable health monitors, battery-powered consumer devices, low-cost motor control, and 5 V industrial control modules. The 28-pin SPDIP package is particularly attractive for prototyping and educational kits, as it drops into a standard 28-pin DIP socket or breadboard for easy firmware iteration. When designing with this MCU, pay close attention to the power supply decoupling scheme (a 100 nF ceramic on VDD is mandatory), and configure unused I/O pins as outputs to minimize sleep current. The MPLAB XC16 compiler is the supported toolchain, and firmware is programmed via the ICSP interface using tools such as MPLAB ICD 4 or PICkit 4. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC24FV08KM102-E/SP that go beyond what is found in the manufacturer datasheet alone, helping engineers evaluate sourcing and second-source options.

견적 요청 문의하기
PIC24FV08KM102-E/SS - 16-bit 32MHz 8KB Flash XLP MCU | Microchip
PIC24FV08KM102-E/SS

PIC24FV08KM102-E/SS - 16-bit 32MHz 8KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FV08KM102-E/SS is a 16-bit PIC24F microcontroller built on the nanoWatt eXtreme Low Power (XLP) architecture, delivering 32 MIPS of CPU performance from a 32 MHz oscillator in a 28-pin SSOP package. It integrates 8 KB of Flash program memory (2.75K x 24 instruction words), 1 KB of SRAM, and 512 bytes of EEPROM, with the wide 2.0V–5.5V PIC24FV supply range enabling both 3V and 5V designs from a single part. A 16-bit MCU is a microcontroller whose data path, registers and ALU are 16 bits wide, sitting hierarchically between 8-bit MCUs (PIC16, AVR) and 32-bit MCUs (PIC32, ARM Cortex-M). The PIC24F family specifically targets low-power embedded applications, occupying the cost/power sweet spot for sensor hubs, human-machine interfaces and battery-powered consumer devices. Within Microchip's portfolio the PIC24FV08KM102 sits inside the KM1xx sub-family of the PIC24F family, which adds a Configurable Logic Cell (CLC) and Peripheral Pin Select (PPS) for flexible peripheral routing. Key features include a 12-bit ADC with up to 13 input channels, two analog comparators, a charge time measurement unit (CTMU) for capacitive touch, four 16-bit timers, capture/compare/PWM peripherals and multiple communication interfaces including UART, SPI and I2C. The on-chip RTCC, deep sleep current in the nanoamp range, and Peripheral Module Disable allow overall system draw to drop below 1 µA in sleep, which is why this part appears in long-life battery designs. Architecturally, the device uses a modified Harvard bus with separate program and data paths, a 16-bit instruction set optimized for C compilation, and a wide operating voltage range from 2.0V to 5.5V. The PIC24FV (wide Vdd) variant extends the 1.8V–3.6V F-series limit up to 5V, making it compatible with legacy 5V analog and industrial buses without level shifters. Typical applications include low-power sensor nodes, capacitive touch user interfaces, battery chargers and power monitors, industrial control panels, and portable medical accessories. When designing with this MCU, ensure PPS is configured before peripheral use and that the 12-bit ADC's acquisition time matches the source impedance to avoid gain errors.

견적 요청 문의하기
PIC24FV08KM102-I/SP - 8KB Flash 16-bit MCU, SPDIP-28 | Microchip
PIC24FV08KM102-I/SP

PIC24FV08KM102-I/SP - 8KB Flash 16-bit MCU, SPDIP-28 | Microchip

The Microchip PIC24FV08KM102-I/SP is a 16-bit microcontroller from the PIC24F XLP family, featuring 8 KB of Flash program memory, 1 KB of SRAM, and 512 bytes of EEPROM, running at up to 32 MHz core speed in a 28-pin SPDIP package. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory (Flash), working memory (RAM), and a rich set of peripherals (ADCs, timers, communication interfaces, GPIO) into one device. The PIC24F family extends this with a 16-bit modified Harvard architecture and Microchip's nanoWatt XLP extreme-low-power extensions, positioning these MCUs in the hierarchy: 16-bit MCU -> PIC24F -> low-power MCU -> embedded microcontroller -> semiconductor IC. The "FV" suffix denotes wide-range (2.0V-5.5V) operation, distinguishing these from the standard "F" 3.3V-only variants. Key features include a 12-bit ADC with up to 500 ksps conversion rate, configurable logic cells (CLC) for hardware glue logic without firmware, multiple Capture/Compare/PWM (MCCP/SCCP) modules, comparators, and 5V-tolerant I/O. The nanoWatt XLP technology delivers sleep currents below 1 µA with retention, making it suitable for battery-powered products. Typical applications include low-cost 5V sensor nodes, industrial control panels, low-power IoT endpoints, and consumer white goods. The 28-SPDIP package remains preferred for prototyping, educational kits, and through-hole designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24FV08KM102-I/SS - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip
PIC24FV08KM102-I/SS

PIC24FV08KM102-I/SS - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24FV08KM102-I/SS is a 16-bit PIC24F microcontroller from the PIC® XLP™ 24F family featuring nanoWatt eXtreme low-power technology, 32 MHz maximum operating frequency, 8 KB Flash program memory, 1 KB RAM, and 512 B EEPROM, housed in a 28-pin SSOP package. It belongs to the "V" wide-voltage subfamily, supporting 2.0V to 5.5V operation, which makes it suitable for both 3V and 5V battery-powered and industrial systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working RAM, and a rich set of peripherals on one die. Microcontrollers sit at the lowest tier of embedded computing beneath microprocessors and SoCs, and they dominate the market for low-power, deterministic, cost-sensitive products such as sensor nodes, white goods, and wearable electronics. The PIC24F family in particular occupies the 16-bit tier of Microchip's portfolio between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX/dsPIC families, offering a meaningful performance step (16-bit data path, 24-bit instructions, hardware DSP-like operations) at modest cost and power. Key features of the PIC24FV08KM102-I/SS include: nanoWatt XLP sleep currents in the nanoamp range for battery-backed applications, a 12-bit A/D converter with up to 12 channels, multiple Capture/Compare/PWM modules, a Configurable Logic Cell (CLC), comparators, and integrated peripherals such as Brown-out Reset, Low-Voltage Detect, Power-on Reset, PWM, and a Watchdog Timer. It also supports up to 23 I/O pins in the 28-pin SSOP package, giving designers ample headroom for mixed-signal interfaces. The wide 2.0V to 5.5V VDD range is unusual for PIC24F devices and simplifies designs that must operate from a single-cell Li-ion as well as a regulated 5V supply. Architecturally, the PIC24FV08KM102 uses a modified Harvard CPU with a 16-bit data path and 24-bit instruction word, plus a hardware Multiply-Divide unit that completes a 16x16 multiply in a single cycle. The CLC peripheral is noteworthy: it allows the user to configure combinational and sequential logic from on-chip signals in firmware, replacing small external glue-logic ICs (gates, muxes, latches) with on-die equivalents - a feature Microchip also promotes for BOM reduction in motor-control and lighting designs. Typical applications include low-power sensor interfaces, consumer electronics (remote controls, e-readers, fitness wearables), portable medical devices, industrial control nodes, battery chargers, smart-home sensors, USB/HID peripherals, and any low-pin-count mixed-signal design that benefits from a wide VDD range. Designers should note that the 28-SSOP footprint is the same as the pin-compatible PIC24F08KM102 (5V-only) variant, which is helpful when migrating between 3V and 5V rails. Pricing references are current as of 2026-09-30 from DigiKey and Mouser listings for the -40C to +85C industrial-grade -I/SS device. This page synthesizes distributor pricing, package-correct drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet. For pinout details and recommended decoupling, consult the official Microchip PIC24FV08KM102 datasheet.

견적 요청 문의하기
PIC24FV08KM102T-I/ML - 16-Bit 32MHz 8KB Flash MCU 28-QFN | Microchip
PIC24FV08KM102T-I/ML

PIC24FV08KM102T-I/ML - 16-Bit 32MHz 8KB Flash MCU 28-QFN | Microchip

The Microchip Technology PIC24FV08KM102T-I/ML is a 16-bit PIC® XLP™ 24F microcontroller running up to 32 MHz with 8 KB (2.75K x 24) of Flash program memory, 1 KB of RAM, and 512 bytes of EEPROM, housed in a 28-pin QFN (6x6 mm) package with an exposed thermal pad. It supports wide operating voltage from 2.0 V to 5.5 V, which is the key differentiator of the FV family, and integrates a 12-bit ADC with up to 19 channels, comparators, configurable logic cells (CLC), and multiple Capture/Compare/PWM (MCCP/SCCP) peripherals for mixed-signal designs. The /ML suffix denotes the 28-QFN (6x6) lead-free industrial temperature range package (-40C to +85C) supplied in tape and reel. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and a configurable set of peripherals such as UART, I2C, SPI, ADC, timers, and PWM channels. Within the broader taxonomy, this part belongs to: microcontroller -> 16-bit MCU -> PIC24F family -> nanoWatt XLP low-power tier. The PIC24FV series extends the platform with 2.0 V–5.5 V support for both battery-powered and 5 V industrial designs, while the XLP nanoWatt technology targets sleep currents measured in nanoamps for energy-harvesting and always-on applications. Key features include 32 MIPS CPU throughput, eXtreme low-power (XLP) sleep modes (typical <100 nA), 16-bit wide instructions, two I2C/SPI/UART selectable serial interfaces, five 16-bit timers, and a configurable logic cell (CLC) that allows on-the-fly digital glue logic without external gates. The 12-bit ADC with hardware averaging delivers up to 19 analog channels for sensor acquisition. The device also provides a charge time measurement unit (CTMU) for capacitive touch sensing. From an architectural perspective, the PIC24F core is a modified Harvard machine with a 16-bit data path and 24-bit instruction word, enabling compact code density for C and assembly. The 8 KB Flash is organized as 2.75K x 24 (instruction-word addressing), and the single-cycle 32 MHz operation yields 32 MIPS of computational throughput. Typical applications include portable medical monitors, low-power IoT sensor nodes, 5 V industrial controllers, automotive body and accessory modules (non-safety), capacitive touch user interfaces, and battery-powered consumer electronics. The wide 2.0–5.5 V range lets the same part operate directly from a single Li-ion cell or a 5 V industrial rail. When migrating between PIC24F and PIC24FV variants, note that the FV designation adds 2.0 V minimum Vdd operation; the F variant (non-FV) typically requires 3.0 V. Use the silicon errata document for revisions and the device-specific programming spec for in-circuit serial programming (ICSP) pinouts. For production, program the part with MPLAB X IDE and a PICkit 5, MPLAB ICD 5, or Curiosity development board. Estimated: VDD decoupling requires a 100 nF ceramic cap within 3 mm of each VDD/VSS pair plus a 1 uF bulk cap on the rail.

견적 요청 문의하기
PIC24FV08KM202-E/ML - 16-bit 32MHz 8KB Flash MCU | Microchip
PIC24FV08KM202-E/ML

PIC24FV08KM202-E/ML - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM202-E/ML is a 16-bit PIC microcontroller from the PIC24F XLP KM family, featuring 8KB of Flash program memory (2.75K x 24 organization), 2KB of SRAM, and a 32MHz maximum CPU speed, all housed in a 28-pin QFN (ML) package with an exposed thermal pad. It operates across a wide 1.8V to 5.5V voltage range and integrates a 12-bit ADC, an 8-bit DAC, operational amplifiers, and a Configurable Logic Cell (CLC), making it suited for compact mixed-signal embedded designs. The device supports 5V operation and is qualified to the -40C to +125C extended industrial temperature range, which suits harsh-environment deployments. A 16-bit microcontroller is an MCU whose data path is 16 bits wide, providing higher arithmetic precision and more efficient code density than 8-bit cores while remaining simpler than 32-bit Cortex-M parts. Within the broader taxonomy, the PIC24FV08KM202 belongs to the Microchip PIC24F XLP family, which in turn is part of the Microchip 16-bit MCU portfolio. PIC24F devices target low-power and ultra-low-power (XLP eXtreme Low Power) battery-fed applications, and the KM sub-family is differentiated by its rich analog integration (ADC + DAC + op amps + CLC) in small pin-count packages. Key features of the PIC24FV08KM202-E/ML include 22 GPIO, multiple Capture/Compare/PWM (MCCP/SCCP) modules, an internal 32MHz oscillator, a hardware Real-Time Clock and Calendar (RTCC), and comprehensive reset and supervision: brown-out reset (BOR), low-voltage detect (LVD), power-on reset (POR), and watchdog timer (WDT). Communication options span I2C, SPI, and UART, and the part supports both ISP and JTAG debug. Typical applications include ultra-low-power IoT sensor nodes, portable battery-powered instruments, USB and human-interface device (HID) peripherals, and small consumer devices where code size, low power, and a compact 6x6 mm QFN footprint are all priorities. The device's integrated op amps and DAC also suit it for sensor interface and signal-conditioning front ends. When designing with this MCU, ensure adequate PCB thermal relief under the exposed pad of the QFN-28 package for proper power dissipation, and use a decoupling capacitor network (typically 0.1 uF + bulk) close to each supply pin. For low-power designs, leverage the XLP sleep modes and the RTCC for accurate wake-up scheduling. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in pin-compatible alternatives from the PIC24F family, and practical design notes not found in the manufacturer datasheet - giving engineers a one-stop reference for selecting and sourcing the PIC24FV08KM202-E/ML.

견적 요청 문의하기
PIC24FV08KM202-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip
PIC24FV08KM202-E/SO

PIC24FV08KM202-E/SO - 16-bit 32MHz 8KB Flash MCU | Microchip

The Microchip Technology PIC24FV08KM202-E/SO is a 16-bit PIC24F microcontroller from the PIC XLP 24F family, featuring 8KB of Flash program memory, 2KB of RAM, and 512 bytes of EEPROM, operating at up to 32 MHz in a 28-pin SOIC wide (SO) package. It integrates eXtreme Low Power (XLP) technology, a 12-bit ADC, configurable logic cells, multiple Capture/Compare/PWM modules, and operates across a wide voltage range of 2.5V/3.3V/5V, making it well-suited for battery-powered and energy-harvesting embedded designs. A PIC24F microcontroller is a 16-bit RISC processor from Microchip's PIC family, sitting in the hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> PIC24F series. Compared with 8-bit MCUs, the 16-bit PIC24F core delivers higher MIPS-per-MHz, wider 16-bit data paths, more efficient C-code execution, and richer peripherals, while retaining the PIC ecosystem's MPLAB X toolchain and peripheral library support. Key features include 8KB Flash (2.75K x 24 instruction words), 2KB SRAM, 512 bytes EEPROM, 32 MHz max CPU clock (8 MIPS), 21 I/O pins, 12-bit ADC with up to 13 input channels, 2 op amps, an 8-bit DAC, 5 CCP/SCCP modules, and a hardware RTCC. The -E suffix denotes the Extended industrial temperature grade (-40C to +125C), and the /SO suffix denotes the 28-pin SOIC wide tube packaging. The PIC24FV08KM202 architecture uses a modified Harvard bus with a 16-bit data path, 24-bit instructions, and a hardware multiply/divide unit. XLP technology provides deep-sleep currents below 1 uA, retaining RAM and running the RTCC from a 32 kHz source. The 5V-tolerant I/O simplifies interface to legacy analog front ends. Typical applications include low-power IoT sensor nodes, industrial sensor signal conditioning, battery-powered instrumentation, consumer white goods user interfaces, USB/HID human-interface devices, and small motor control. The combination of XLP sleep current, integrated op amps, and configurable logic cells enables compact BOMs without external signal-conditioning ICs. When designing with this part, reserve an RC oscillator option for BOM-cost-sensitive boards, but use the PLL-driven primary oscillator when USB or PWM timing precision is required. Carefully review the brown-out-reset and watchdog configuration bits during firmware bring-up, because the PIC24F power-on reset sequencing differs from older PIC16F devices. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet to help engineers select, source, and design with the PIC24FV08KM202-E/SO more efficiently.

견적 요청 문의하기
PIC24FV08KM202-E/SS - 16-Bit 32MHz MCU 8KB Flash | Microchip
PIC24FV08KM202-E/SS

PIC24FV08KM202-E/SS - 16-Bit 32MHz MCU 8KB Flash | Microchip

The Microchip Technology PIC24FV08KM202-E/SS is a 16-bit PIC microcontroller from the eXtreme Low Power (XLP) PIC24F KM family, featuring a 32 MHz MIPS16 enhanced CPU core with 8 KB Flash program memory (2.75K x 24 organization) and 2 KB SRAM. It is housed in a 28-pin SSOP package and operates across a wide 1.8 V to 5.5 V supply range. The 'V' suffix indicates the on-chip 5 KB Flash regulator (FR) that allows the core to operate at full speed even on low-voltage rails, while the 'E' suffix denotes the -40 C to +125 C extended industrial temperature grade. As a member of the KM family, the PIC24FV08KM202 integrates an on-chip 12-bit ADC, a 10-bit DAC, op amps, comparators, and a charge time measurement unit (CTMU), enabling mixed-signal front-ends without external analog components. The PIC24F KM family is a low-power 16-bit microcontroller platform that builds on the legacy PIC24F architecture while adding nanoWatt XLP energy-management features. These microcontrollers are intended for battery-powered and energy-harvesting applications where the 16-bit instruction set, deterministic interrupt handling, and integrated analog peripherals reduce board space and bill-of-materials cost. The PIC24FV08KM202 specifically targets small-pin-count designs (28/36 SSOP/SOIC/SPDIP/QFN) running from 1.8 V to 5.5 V, with a maximum throughput of 16 MIPS at 32 MHz. The 16-bit core can address up to 64 KB of program space, and the KM variant adds peripherals commonly used in sensor interfaces and power-conversion loops. Key features of the PIC24FV08KM202-E/SS include 23 general-purpose I/O pins, a 12-bit ADC with up to 500 ksps throughput, a 10-bit DAC, integrated op amps for signal conditioning, multiple 16-bit timers, a watchdog timer (WDT), brown-out reset (BOR), low-voltage detect (LVD), power-on reset (POR), PWM, I2C, SPI, and UART peripherals. The XLP sleep current is below 20 nA in deep sleep mode with RTCC running, and the device supports multiple low-power modes (Idle, Sleep, Deep Sleep) with multiple wake-up sources. The 28-SSOP package is the standard narrow-body 300 mil wide surface-mount outline used widely in industrial and consumer designs. Typical applications include handheld medical devices, IoT sensor nodes, remote controls, energy-harvesting wireless sensor nodes, battery-powered instrumentation, smart metering, low-power motor control (PWM-driven small BLDC drivers), and general-purpose mixed-signal embedded systems. The integrated op amps and DAC simplify analog front-end designs, while the CTMU supports capacitive touch and time-of-flight measurements. The 1.8 V minimum supply enables direct connection to single-cell Li-Ion or two AA alkaline cells. When designing with the PIC24FV08KM202-E/SS, ensure the supply decoupling uses a 10 uF tantalum and 0.1 uF ceramic pair close to the VDD/AVDD pins. The PGEC and PGED pins must be accessible for ICSP programming and in-circuit debugging using MPLAB ICD or MPLAB Snap. Reserve adequate ground pour under the package to support thermal dissipation in high-temperature industrial environments.

견적 요청 문의하기
PIC24FV08KM202-I/ML - 16-Bit XLP MCU 8KB Flash 28-QFN | Microchip
PIC24FV08KM202-I/ML

PIC24FV08KM202-I/ML - 16-Bit XLP MCU 8KB Flash 28-QFN | Microchip

The Microchip PIC24FV08KM202-I/ML is a 16-bit PIC24F microcontroller from the eXtreme Low Power (XLP) KM family, featuring 8KB Flash program memory organized as 2.75K x 24 words, 2KB SRAM, and a 32MHz maximum CPU speed, housed in a 28-pin 6x6 mm QFN package with exposed pad. It operates over a wide 2V to 5.5V supply range and integrates a rich analog front-end including a 12-bit ADC, an 8-bit DAC, operational amplifiers, and comparators. The device includes three 16-bit Capture/Compare/PWM modules, a Configurable Logic Cell (CLC), and standard serial interfaces (I2C, SPI, UART), all positioned for ultra-low-power embedded designs. A 16-bit PIC microcontroller is a member of the wider microcontroller hierarchy that sits between 8-bit MCU cores and 32-bit Cortex-M devices, offering a balanced trade-off between deterministic interrupt latency, computational throughput, and code density for real-time control. PIC24F devices are specifically designed for low-power and mixed-signal embedded applications, sitting in Microchip's portfolio between the baseline PIC16 family and the high-performance dsPIC and 32-bit families. The 'FV' prefix in PIC24FV08KM202 indicates the wide-voltage 2.0V-5.5V variant, and 'XLP' stands for eXtreme Low Power, with sleep currents in the nanoampere range. Key features include the integrated 12-bit ADC with up to 500 ksps conversion rate, dual operational amplifiers that can be configured as programmable gain amplifiers, an 8-bit DAC for bias or setpoint generation, and the Configurable Logic Cell which allows designers to create custom combinational and sequential logic without external gates. The XLP architecture delivers typical sleep currents below 60 nA with RTC running, and the device supports multiple low-power modes (Sleep, Idle, Doze) controlled via the Power-Saving Modes register set. Typical applications include battery-powered sensor nodes, portable medical devices, low-power wireless sensor transmitters, energy harvesting systems, and industrial sensor interfaces requiring on-chip signal conditioning. The integrated op-amps and DAC simplify analog front-end designs, reducing BOM and PCB area versus discrete implementations. Designers often pair the part with an external EEPROM for data logging and a low-power radio module for IoT endpoints. When designing with this MCU, pay attention to the wide-voltage analog specifications: the ADC and op-amp performance varies with VDD, and the QFN exposed pad must be soldered to the PCB ground plane for proper thermal dissipation and electrical reference. Always use the latest MPLAB X IDE with the XC16 compiler for code generation, and consult the family reference manual for peripheral driver libraries.

견적 요청 문의하기
PIC24FV08KM202-I/SO - 16-bit XLP MCU, 8KB Flash, 28-SOIC | Microchip
PIC24FV08KM202-I/SO

PIC24FV08KM202-I/SO - 16-bit XLP MCU, 8KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC24FV08KM202-I/SO is a 16-bit PIC® XLP™ 24F family microcontroller that delivers 32 MHz CPU performance with 8 KB Flash and 2 KB SRAM in a 28-pin SOIC (SO) wide-body package. It belongs to the FV variant, supporting a wide 2.0V to 5.5V operating range that enables both 3.3V and 5V systems from a single part, while the PIC24F (non-V) siblings cover 1.8V-3.6V. The MCU integrates eXtreme Low Power (XLP) technology, a 12-bit ADC, dual 8-bit DACs, operational amplifiers, comparators, and a Configurable Logic Cell (CLC). A microcontroller (MCU) is a single-chip computer that contains a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals such as ADC, timers, communication ports, and I/O pins. The PIC24F family uses a 16-bit modified Harvard RISC architecture with 16-bit wide instructions and 24-bit wide data paths, sitting in the hierarchy (in-band interconnect) PIC24F -> PIC24 -> PIC -> 8-bit microcontroller -> embedded processor -> semiconductor. The XLP designation denotes nanoWatt technology for sleep currents below 100 nA in deep sleep modes. Key specifications include 32 MHz MIPS performance, 8 KB Flash (2.75K x 24 instruction words), 2 KB SRAM, integrated 12-bit ADC up to 500 ksps, two 8-bit DACs, three op-amps, two analog comparators, three 16-bit Capture/Compare/PWM (CCP) modules, two UART, one SPI, one I²C, and a 25 mA source/sink per I/O capability. The Configurable Logic Cell allows hardware-level combinational and sequential logic without burning CPU cycles, useful for glue-logic replacement and event-driven signaling. Typical applications include portable medical devices (blood glucose meters, pulse oximeters), battery-powered IoT sensor nodes, low-power LCD or segment displays, consumer remote controls, smart thermostats, and industrial 4-20 mA loop-powered transmitters. The wide operating voltage makes it compatible with both 3.3V digital ICs and legacy 5V analog front-ends. When designing with this MCU, choose a supervisor/MCU pair that matches your real-time response needs; the 32 MHz core delivers 16 MIPS. For lowest sleep current, route unused pins as outputs and disable unused peripherals via PMD registers. The 28-SOIC package supports easy hand-soldering and breadboard prototyping.

견적 요청 문의하기
PIC24FV08KM202-I/SS - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip
PIC24FV08KM202-I/SS

PIC24FV08KM202-I/SS - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24FV08KM202-I/SS is a 16-bit PIC24F microcontroller from the XLP (eXtreme Low Power) family, integrating 8KB of Flash program memory, 2KB of SRAM, and 512B of EEPROM into a 28-pin SSOP package. It operates from 2.0V to 5.5V (the FV variant supports 5V) and runs the CPU at up to 32MHz instruction rate, delivering roughly 16 MIPS throughput. The part number suffix /SS denotes the 28-lead SSOP package, while /I denotes the industrial temperature range of -40C to +85C. A PIC (Peripheral Interface Controller) microcontroller is a Harvard-architecture RISC processor designed by Microchip, sitting within the broader MCU > microcontroller > embedded processor > semiconductor hierarchy. The 16-bit PIC24F family targets low-power, analog-rich embedded designs and is widely used in consumer, industrial, and IoT products where deterministic behavior, integrated peripherals, and low sleep current matter more than raw MHz. Key features include a 12-bit A/D converter with up to 16 channels, two 8-bit DACs, two operational amplifiers, two analog comparators, three op-amp/comparator/timer modules, and Microchip's Configurable Logic Cell (CLC) for hardware-level glue logic without external gates. Communication peripherals cover I2C, SPI, UART, and CCP/CCP capture/compare/PWM modules for motor and lighting control. The 'FV' prefix specifically guarantees 5V-tolerant operation alongside 3.3V systems, enabling designs that mix legacy 5V analog with modern 3.3V logic. Typical applications include low-power sensor nodes, e-metering, battery-powered medical devices, LED lighting controllers, HVAC control panels, and small appliance human-machine interfaces. The XLP sleep currents in the nanoamp range extend battery life for products that wake infrequently and need years of standby operation. When designing with this part, reserve at least two GPIO for SWD-style programming/debug if you plan to use ICSP, and verify the FV voltage tolerance if your rails exceed 3.6V. The internal 7.37MHz FRC oscillator with PLL gives you a free 32MHz system clock without any external crystal, saving BOM cost in cost-sensitive designs. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the bare manufacturer datasheet, so engineers can shortlist candidates faster.

견적 요청 문의하기
PIC24FV08KM202T-I/ML - 16-Bit 32MHz 8KB FLASH MCU | Microchip
PIC24FV08KM202T-I/ML

PIC24FV08KM202T-I/ML - 16-Bit 32MHz 8KB FLASH MCU | Microchip

The Microchip Technology PIC24FV08KM202T-I/ML is a 16-bit PIC® XLP™ 24F microcontroller (MCU) featuring 8 KB of FLASH program memory, 2 KB of RAM, and a maximum CPU speed of 32 MHz. It is housed in a 28-pin QFN (ML, 6x6 mm) package with an exposed thermal pad, making it one of the most integrated analog-plus-digital low-pin-count devices in the PIC24F family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (FLASH/ROM), data memory (RAM), and a rich set of on-chip peripherals such as timers, communication interfaces, ADCs, and DACs. The PIC24F family sits in the 16-bit MCU segment of Microchip's portfolio, above the 8-bit PIC16/PIC18 lines and below the 32-bit PIC32 line. The "XLP" (eXtreme Low Power) designation indicates the device targets battery-powered and energy-harvesting applications with sub-uA sleep currents. PIC24F devices generally operate from 1.8 V to 5.5 V (the FV variant retains 5 V tolerance and adds a wider flash endurance window), making them well-suited to coin-cell, 2xAA, and 3.3 V/5 V mixed-rail systems. Key differentiating specifications of this part include integrated 12-bit ADC, an 8-bit DAC, on-chip operational amplifiers, and a Configurable Logic Cell (CLC) - features rarely bundled at this pin count. Communication peripherals include I2C, SPI, UART/USART, LIN, and IrDA. The 32 MHz CPU delivers up to 16 MIPS, sufficient for real-time control loops, sensor fusion, and basic signal processing. Architecturally, the PIC24FV08KM202 uses a 16-bit modified Harvard core with a 24-bit instruction word, allowing single-cycle MAC operations and deterministic interrupt latency. The wide 1.8-5.5 V supply range, eXtreme Low Power modes (sleep, deep sleep, RTCC), and integrated analog make this device well suited for portable instrumentation, sensor hubs, and consumer electronics. Typical applications include low-power IoT sensor nodes, battery-powered medical devices (glucose meters, pulse oximeters), LIN slave nodes in automotive body electronics, e-metering and smart thermostats, and small industrial HMI panels. The integrated op-amp + DAC chain enables direct photodiode or bridge-sensor interfaces without external analog ICs. When designing with this part, pay attention to the 28-QFN PCB footprint and exposed pad layout - the e-pad must be soldered to a sufficient ground copper area (typically >= 1 square inch) to meet the datasheet's thermal resistance spec. Decoupling capacitors should be placed within 3 mm of the VDD/VSS pins. This page synthesizes distributor pricing, parametric data, drop-in alternatives from the PIC24F KM family, and practical PCB design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24FV08KM202T-I/SO - 16-bit 32MHz 8KB Flash XLP MCU | Microchip
PIC24FV08KM202T-I/SO

PIC24FV08KM202T-I/SO - 16-bit 32MHz 8KB Flash XLP MCU | Microchip

The Microchip Technology PIC24FV08KM202T-I/SO is a 16-bit PIC microcontroller from the PIC XLP 24F family operating at up to 32 MHz with 8 KB of Flash program memory (organized as 2.75K x 24 instructions), 2 KB of RAM, and integrated analog peripherals including 12-bit ADC, 8-bit DAC, operational amplifiers, comparators and a Configurable Logic Cell (CLC). The -I/ suffix denotes the -40C to +85C industrial temperature range, the T indicates Tape and Reel packaging, and /SO marks the 28-pin SOIC (0.295 inch / 7.50 mm body width) package. A 16-bit PIC microcontroller (MCU) is a microcontroller built around a 16-bit modified Harvard architecture core with separate program and data buses, 16 working registers, and a single-cycle hardware multiply. PIC24F parts sit between the 8-bit PIC16/PIC18 families and the 32-bit PIC32MX line, providing more performance and peripherals than 8-bit parts while retaining the simple MPLAB X IDE / XC16 toolchain and the Peripheral Pin Select (PPS) flexibility that 8-bit PICs lack. The XLP (eXtreme Low Power) designation indicates deep-sleep currents in the nanoamp range, multiple idle/sleep modes, and dynamic clock gating for battery-powered applications. In the broader taxonomy, PIC24FV08KM202 belongs to: microcontroller -> embedded MCU -> semiconductor IC -> PIC24F family. The most differentiating specifications of the PIC24FV08KM202 are its wide operating voltage range of 2.0V to 5.5V (the FV variant; the F variant operates at 1.8V-3.6V), eXtreme Low Power technology with down to nanoamp sleep currents, and a high level of analog integration in a small 28-pin SOIC footprint - features uncommon in low-pin-count PIC parts. The integrated op amps and 8-bit DAC allow direct sensor signal conditioning on-chip without external analog ICs. Technically, the part uses Microchip's nanoWatt XLP technology with multiple low-power modes (Sleep, Idle, Doze, Alternate Run modes), a 12-bit ADC with up to 12 input channels, up to three op amps configurable as amplifiers or comparators, a 5-bit or 10-bit DAC, multiple Capture/Compare/PWM (CCP/ECCP) modules, a Configurable Logic Cell for glue-logic replacement, and a peripheral pin select (PPS) system that remaps digital peripherals to most I/O pins. Typical applications for the PIC24FV08KM202T-I/SO include ultra-low-power IoT sensor nodes, portable medical monitoring devices, battery-powered instrumentation with on-chip signal conditioning, and consumer products needing 5V-tolerant I/O. The wide 2.0V-5.5V range also makes it suitable for both 3V coin-cell and 5V USB-powered designs without a separate regulator. When designing with this MCU, ensure MPLAB X IDE with the XC16 compiler is used for firmware development; Microchip's Code Configurator (MCC) plugin accelerates peripheral setup. PPS remapping must be configured before peripheral use, and decoupling should follow standard 100 nF + bulk capacitor placement within 5 mm of the VDD pins. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the PIC24F family, and practical design notes not consolidated on the manufacturer product page.

견적 요청 문의하기
PIC24FV08KM202T-I/SS - 16-bit 8KB Flash XLP MCU, 28-SSOP | Microchip
PIC24FV08KM202T-I/SS

PIC24FV08KM202T-I/SS - 16-bit 8KB Flash XLP MCU, 28-SSOP | Microchip

The Microchip Technology PIC24FV08KM202T-I/SS is a 16-bit PIC24F XLP (eXtreme Low Power) microcontroller with 8KB Flash, 2KB RAM, 512B EEPROM, 12-bit ADC, 8-bit DAC, integrated op amps, and configurable logic cell, in a 28-pin SSOP package. It operates from 2.0V to 5.5V at up to 32MHz. A PIC microcontroller (MCU) is a programmable embedded processor that integrates a CPU, non-volatile Flash memory, RAM, peripherals, and I/O on a single silicon die. The PIC24F family uses a 16-bit modified Harvard architecture with DSP-enhanced instructions, bridging 8-bit PIC16/PIC18 designs and 32-bit PIC32MX designs. Within the PIC taxonomy, PIC24F belongs to the eXtreme Low Power (XLP) tier that targets battery-powered applications: deep sleep currents in the nanoamp range and active currents in the microamp-per-MHz range. Key differentiating features of this part include: integrated 12-bit ADC with up to 500 ksps sampling rate, dual 8-bit DAC outputs with waveform generation, two operational amplifiers with internal/external configuration, a Configurable Logic Cell (CLC) for hardware glue logic, multiple Capture/Compare/PWM (CCP) and output compare modules, plus 5-bit and 16-bit timers. The FV (wide-voltage) prefix denotes support down to 2.0V, versus the standard F variant at 1.8V/2.0V minimums in this family. Communication peripherals include I2C, SPI, UART with IrDA and LIN host support. Typical applications include portable medical sensor nodes, eMetering data concentrators, low-power wireless sensor interfaces (with attached radio), LED lighting controllers, and small appliance user interfaces. The integrated op amps and DACs reduce BOM cost in mixed-signal analog front-end designs where external amplifiers would otherwise be required. When designing with this MCU, evaluate sleep current at your application's idle duty cycle: XLP modes below 100 nA are achievable but require correct peripheral gating. The SSOP-28 package offers easier hand-soldering than QFN options at the cost of slightly larger PCB footprint. Confirm debugger compatibility (ICD 3, PICkit 4, MPLAB Snap) and required programming voltage for your production flow. This page consolidates distributor pricing, drop-in same-package alternatives, and application notes drawn from the Microchip datasheet family - content not bundled in the standalone datasheet PDF.

견적 요청 문의하기
PIC24FV08KM204-E/MV - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip
PIC24FV08KM204-E/MV

PIC24FV08KM204-E/MV - 16-bit XLP MCU, 8KB Flash, 32MHz | Microchip

The Microchip Technology PIC24FV08KM204-E/MV is a 16-bit PIC® XLP™ 24F microcontroller featuring 8KB (2.75K x 24) of Flash program memory, 2KB of RAM, and a 32MHz maximum CPU speed, housed in a 48-pin UQFN (MV) package measuring 6x6 mm. Designed for eXtreme Low Power (XLP) operation, the device integrates an enhanced 16-bit modified Harvard architecture with a wide operating voltage range suited for both battery-powered and line-powered embedded designs. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals such as ADCs, timers, communication interfaces, and I/O. A 16-bit MCU like the PIC24FV family occupies the middle ground between 8-bit MCUs (lowest cost, lowest performance) and 32-bit MCUs (highest performance, highest cost), offering enough compute headroom for sensor fusion, motor control, and signal processing without the power and code-size overhead of a Cortex-M class device. PIC24F devices specifically target low-power portable applications through Microchip's XLP technology, which minimizes active and sleep currents so that coin-cell and energy-harvesting designs remain viable. The PIC24FV08KM204 integrates 22 channels of 10-bit/12-bit ADC, dual 8-bit DACs, configurable logic cells, op-amps, multiple Capture/Compare/PWM (CCP) modules, and communication peripherals. XLP features deliver nanoWatt sleep currents, allowing the device to wake on interrupts for asynchronous sampling. Typical applications include handheld medical devices, IoT sensor nodes, low-energy wireless platforms, USB/LED lighting controllers, and consumer electronics. Designers choose this MCU when balancing code density, peripheral integration, and sub-microamp standby current in compact PCB footprints. Designers must respect the MV (UQFN-48 6x6 mm) land pattern, ensure exposed-pad soldering for thermal dissipation, and select the appropriate -E (extended) or -I (industrial) temperature grade per their end environment. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

견적 요청 문의하기
PIC24FV08KM204-I/PT - 16-bit XLP MCU, 8KB Flash, 44-TQFP | Microchip
PIC24FV08KM204-I/PT

PIC24FV08KM204-I/PT - 16-bit XLP MCU, 8KB Flash, 44-TQFP | Microchip

The Microchip Technology PIC24FV08KM204-I/PT is a 16-bit PIC® XLP™ 24F microcontroller with 8 KB (2.75K x 24) of Flash program memory and 2 KB of RAM, operating at up to 32 MHz, housed in a 44-pin TQFP (10x10 mm) package. The "FV" prefix indicates the wide-voltage 2V-5.5V tolerant core, and the "I/PT" suffix denotes the industrial temperature range (-40C to +85C) in TQFP packaging. A 16-bit microcontroller (MCU) is an integrated circuit combining a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals on a single die. The PIC24F family sits in Microchip's eXtreme Low Power (XLP) tier, optimized for battery-powered and energy-harvesting designs where nanoWatt sleep currents and fast wake-up times are decisive. Within the broader taxonomy, PIC24F MCUs belong to the 16-bit microcontroller class, which bridges 8-bit PIC microcontrollers and 32-bit ARM Cortex-M devices. Key features of the PIC24FV08KM204 include an integrated 12-bit ADC with up to 22 input channels, two 8-bit DACs, operational amplifiers on-chip, configurable logic cells (CLC), multiple Capture/Compare/PWM modules, and the XLP nanoWatt sleep modes with currents in the microamp range. The 32 MHz MIPS core provides up to 16 MIPS throughput while consuming as little as 250 uA/MHz active, and the wide 2V-5.5V supply range supports direct Li-ion, 3.3V and 5V rails. The architecture combines a 16-bit modified Harvard RISC core with a hardware multiply/divide, a 17-bit x 17-bit single-cycle multiplier, and zero-overhead loop control. Analog-rich integration (12-bit ADC, 8-bit DACs, op amps) eliminates many external components, while CLC peripheral logic lets designers implement combinatorial logic in firmware, reducing BOM and PCB area. Typical applications include portable medical sensors, IoT edge nodes, low-power wireless sensor hubs, battery-powered instrumentation, and consumer devices such as wearables and remote controls. The integrated analog peripherals make the device especially well suited to sensor conditioning and signal measurement. When designing with this part, choose a low-ESR ceramic bypass capacitor (100 nF) on VDD and AVdd, keep analog traces short, and use the deep-sleep modes with RTCC for sub-microamp standby. Migrating to the 16-KB Flash sister part PIC24FV16KM204 is footprint-compatible for code-growth headroom.

견적 요청 문의하기
PIC24FV08KM204T-I/ML - 16-bit XLP MCU, 8KB Flash, 44-QFN | Microchip
PIC24FV08KM204T-I/ML

PIC24FV08KM204T-I/ML - 16-bit XLP MCU, 8KB Flash, 44-QFN | Microchip

The Microchip PIC24FV08KM204T-I/ML is a 16-bit PIC® XLP™ 24F microcontroller delivering 32 MIPS performance at 32 MHz, 8 KB of self-programmable Flash program memory, 2 KB of SRAM, and integrated analog peripherals in a 44-pin QFN (8x8 mm) package with exposed thermal pad. The 'FV' family variant supports a wide 2.0 V to 5.5 V operating range, making it ideal for battery-powered designs that must also interface with 5 V analog systems. A PIC24F microcontroller is a 16-bit modified Harvard RISC core from Microchip's PIC24F family, positioned between 8-bit PIC16/PIC18 parts and 32-bit PIC32 devices. Within the broader taxonomy: PIC24F -> 16-bit microcontroller -> microcontroller (MCU) -> embedded controller -> semiconductor. XLP (eXtreme Low Power) parts add nanoWatt technology peripherals such as deep sleep, RTC, and ultra-low-power watchdog, allowing the chip to extend battery life in always-on applications. Key features include an integrated 12-bit A/D converter with up to 16 input channels, dual 8-bit DACs, three operational amplifiers, three analog comparators, a configurable logic cell (CLC), and multiple PWM/SCCP/MCCP timers. Communication peripherals include UART, SPI, I²C, and IrDA support. The 44-QFN exposed-pad package provides low thermal resistance and a compact 8x8 mm footprint suitable for dense PCB designs. Typical applications include portable medical instruments, USB human-interface devices, sensor hubs, low-power wireless sensor nodes, and e-metering front ends. The wide 2.0–5.5 V supply range also suits industrial 24 V bus pre-regulation post-buck stages. For best noise performance, place 0.1 µF ceramic decoupling capacitors adjacent to every VDD/VSS pair and connect the QFN exposed pad to a solid ground plane. Designers migrating from older PIC24F parts should review the Configurable Logic Cell configuration - misconfigured CLC blocks are a common first-prototype failure mode.

견적 요청 문의하기
PIC24FV08KM204T-I/MV - 16-Bit 32MHz XLP MCU 8KB Flash | Microchip
PIC24FV08KM204T-I/MV

PIC24FV08KM204T-I/MV - 16-Bit 32MHz XLP MCU 8KB Flash | Microchip

The Microchip PIC24FV08KM204T-I/MV is a 16-bit PIC24F microcontroller with 8KB Flash, 2KB RAM, and a maximum CPU speed of 32MHz, housed in a 48-pin UQFN (6x6 mm) package with exposed pad. It operates across 2.5V/3.3V/5V rails and integrates a 10/12-bit ADC, dual 8-bit DACs, op-amps, and a configurable logic cell (CLC) for hardware customization. A microcontroller (MCU) is an integrated circuit combining a CPU, memory (Flash for program code, SRAM for data), and a rich set of peripherals on a single silicon die. The PIC24F family sits in the 16-bit MCU segment of Microchip's product tree, above 8-bit PIC MCUs and below 32-bit SAM/PIC32 devices. The 'V' in PIC24FV denotes the wide-voltage variant that supports 2.0V-5.5V operation, ideal for battery-powered designs where supply varies as cells discharge. Key features include 8KB (2.75K x 24 words) Flash program memory, 2KB SRAM, an integrated 22-channel 10/12-bit ADC supporting 100 ksps at 12-bit resolution, dual 8-bit Digital-to-Analog converters, operational amplifiers, comparators, and a Configurable Logic Cell (CLC). The 'XLP' (eXtreme Low Power) designation delivers sub-uA sleep currents, making it suited to energy-harvesting and long-life battery applications. The device uses a 16-bit modified-Harvard RISC architecture with a 32MHz internal oscillator. It includes 21-channel touch-sensing support, hardware crypto engine (CEC-compatible variants), and 5V-tolerant I/O. The 48-pin UQFN exposed-pad package improves thermal dissipation and PCB real-estate efficiency for space-constrained wearables and IoT nodes. Typical applications include portable medical sensor interfaces, IoT sensor hubs, e-metering, consumer wearables, touch-button user interfaces, and battery-powered industrial sensor nodes. Designers select this part for designs needing analog integration (ADC+DAC+op-amp) without external components. Designers should note that the 'T' suffix denotes tape-and-reel packaging for high-volume assembly, and the 'I' grade specifies -40C to +85C industrial temperature range. The 'V' variant's wide-voltage tolerance reduces power supply complexity for multi-cell battery designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet - unique value for engineers selecting this PIC24F MCU.

견적 요청 문의하기