PIC24FV08KM102-E/SP - 16-Bit MCU, 8KB Flash, 32MHz | Microchip
부품 번호: PIC24FV08KM102-E/SP ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $3.18 | $3.18 |
| 10 | $2.85 | $28.50 |
| 100 | $2.54 | $254.00 |
| 500 | $2.27 | $1,135.00 |
| 1,000 | $2.04 | $2,040.00 |
PIC24FV08KM102-E/SP 개요
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working memory (SRAM), data EEPROM, and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O. Within the broader taxonomy, the PIC24FV08KM102 sits in the 16-bit MCU class, above 8-bit MCUs (PIC10/12/16) and below 32-bit MCUs (PIC32, ARM Cortex-M). It belongs to the category of low-power embedded controllers used in battery-powered and energy-harvesting designs.
Key features of this device include a 16-bit modified Harvard architecture with a 32 MHz internal oscillator, nanoWatt eXtreme Low Power (XLP) technology for deep sleep currents in the nanoamp range, multiple Capture/Compare/PWM (MCCP/SCCP) modules for motor control and lighting, a 12-bit Analog-to-Digital Converter (ADC), comparators, and a Configurable Logic Cell (CLC) for hardware glue logic without external gates. The integrated peripheral set reduces BOM cost and PCB footprint for space-constrained designs.
The PIC24FV08KM102 is engineered for ultra-low-power applications using the XLP nanoWatt technology platform. Sleep currents below 100 nA in deep sleep with Real-Time Clock and Calendar (RTCC) running make this part suitable for battery-powered sensor nodes that must operate for years on a single coin cell. The wide 2.0 V–5.5 V supply range eliminates the need for multiple voltage rails and allows direct connection to single-cell Li-ion, two-cell AA, and 5 V USB-powered systems.
Typical applications include IoT sensor nodes, wearable health monitors, battery-powered consumer devices, low-cost motor control, and 5 V industrial control modules. The 28-pin SPDIP package is particularly attractive for prototyping and educational kits, as it drops into a standard 28-pin DIP socket or breadboard for easy firmware iteration.
When designing with this MCU, pay close attention to the power supply decoupling scheme (a 100 nF ceramic on VDD is mandatory), and configure unused I/O pins as outputs to minimize sleep current. The MPLAB XC16 compiler is the supported toolchain, and firmware is programmed via the ICSP interface using tools such as MPLAB ICD 4 or PICkit 4.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes for the PIC24FV08KM102-E/SP that go beyond what is found in the manufacturer datasheet alone, helping engineers evaluate sourcing and second-source options.
드롭인 대체품: PIC24FV08KM102-E/SP — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PIC24FV08KM102-E/SP (동일 폼 팩터 및 풋프린트) — 차이점: Package, ADC, Mounting Type, Operating Temperature, Program Memory (Flash).
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
PIC24FV08KM102-I/SP
✅ 드롭인✓ 재고 있음
$1.97 / 개
데이터시트 보기 →PIC24F08KM102-E/SP
✅ 드롭인✓ 재고 있음
$2.42 / 개
데이터시트 보기 →PIC24FV08KM101-I/SP
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ16GA002-E/SP
✅ 드롭인✓ 재고 있음
$2.85 / 개
데이터시트 보기 →PIC24FJ64GB002-E/SP
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
PIC24FJ32GA002-E/SP
✅ 드롭인 ⚠️ 사양 미검증✓ 재고 있음
$2.07 / 개
데이터시트 보기 →PIC24FV08KM102-E/SP 최대 정격 & 전기적 특성
| Series | PIC® XLP™ 24F |
| Core Architecture | 16-bit PIC24 modified Harvard |
| CPU Speed | 32 MHz (16 MIPS) |
| Program Memory (Flash) | 8 KB (2.75K x 24) |
| RAM | 1 KB |
| EEPROM | 512 B |
| Operating Voltage Range | 2.0 V to 5.5 V |
| 패키지 | 28-pin SPDIP (Skinny Plastic DIP, 0.300" / 7.62 mm row spacing) |
| 실장 유형 | Through-hole |
| ADC | 12-bit |
| Comparators | Yes |
| PWM / Timer Modules | MCCP / SCCP (Capture/Compare/PWM) |
| Configurable Logic Cell (CLC) | Yes |
| Low-Power Technology | nanoWatt eXtreme Low Power (XLP) |
| Operating Temperature Range (E suffix) | -40 °C to +125 °C (Extended) |
| RoHS 상태 | Compliant |
| Programming Interface | ICSP (In-Circuit Serial Programming) |
PIC24FV08KM102-E/SP 핀 구성
| 핀 1 | MCLR — Master Clear (Reset) input, active low |
| 핀 2 | RA0 — I/O port A bit 0 / analog input AN0 |
| 핀 3 | RA1 — I/O port A bit 1 / analog input AN1 |
| 핀 4 | RB0 — I/O port B bit 0 / analog input AN2 |
| 핀 5 | RB1 — I/O port B bit 1 / analog input AN3 |
| 핀 6 | RB2 — I/O port B bit 2 / analog input AN4 |
| 핀 7 | RB3 — I/O port B bit 3 / analog input AN5 |
| 핀 8 | VSS — Ground reference |
| 핀 9 | OSC1 — Oscillator crystal input / external clock |
| 핀 10 | OSC2 — Oscillator crystal output |
| 핀 11 | RC0 — I/O port C bit 0 / analog input AN6 |
| 핀 12 | RC1 — I/O port C bit 1 / analog input AN7 |
| 핀 13 | RC2 — I/O port C bit 2 / analog input AN8 |
| 핀 14 | RC3 — I/O port C bit 3 / analog input AN9 |
| 핀 15 | RC4 — I/O port C bit 4 / analog input AN10 |
| 핀 16 | RC5 — I/O port C bit 5 / analog input AN11 |
| 핀 17 | RC6 — I/O port C bit 6 / TX for UART |
| 핀 18 | RC7 — I/O port C bit 7 / RX for UART |
| 핀 19 | VSS — Ground reference (second pin) |
| 핀 20 | VDD — Positive supply voltage (2.0 V to 5.5 V) |
| 핀 21 | RB4 — I/O port B bit 4 |
| 핀 22 | RB5 — I/O port B bit 5 |
| 핀 23 | RB6 — I/O port B bit 6 / ICSP programming clock (PGC) |
| 핀 24 | RB7 — I/O port B bit 7 / ICSP programming data (PGD) |
| 핀 25 | RA2 — I/O port A bit 2 / analog input AN12 |
| 핀 26 | RA3 — I/O port A bit 3 / analog input AN13 |
| 핀 27 | RA4 — I/O port A bit 4 / analog input AN14 |
| 핀 28 | RA5 — I/O port A bit 5 / analog input AN15 |
일반적인 애플리케이션
PIC24FV08KM102-E/SP 적합 용도: 6 애플리케이션s: Battery-Powered IoT Sensor Nodes, Wearable Health Monitors, Low-Cost Motor Control (BLDC / Stepper), 5 V Industrial Control Modules, LED Lighting and Dimming Controllers, Educational MCU Development Kits.
Battery-Powered IoT Sensor Nodes
The PIC24FV08KM102-E/SP is well suited for IoT sensor nodes that must run for years on a coin cell or two AA batteries. Its nanoWatt XLP technology delivers sleep currents below 100 nA with the RTCC active, and the integrated 12-bit ADC supports direct connection to temperature, humidity, and analog sensor outputs. The wide 2.0 V–5.5 V supply range allows direct operation from a single Li-ion or 3 V battery without an extra regulator, reducing both BOM cost and quiescent loss. A typical sensor node design uses deep-sleep wake on timer interrupt, samples one ADC channel, transmits a packet via UART SPI, and returns to sleep, achieving 5–10 year battery life.
추천
Wearable Health Monitors
Wearable health monitors such as fitness bands, optical heart-rate patches, and continuous glucose monitors benefit from the PIC24FV08KM102-E/SP's small 28-pin SPDIP footprint for prototype iteration and the XLP sleep mode for weeks-long battery life. The 32 MHz core is fast enough to run simple DSP filters for PPG or ECG signal conditioning, and the Configurable Logic Cell (CLC) can implement hardware debouncing or PWM-driven LED pulse generation without external gates. The 5 V-tolerant I/Os allow direct interface to low-cost analog front ends, while the 12-bit ADC provides sufficient resolution for biosensor signal acquisition in wearable form factors.
추천
Low-Cost Motor Control (BLDC / Stepper)
The PIC24FV08KM102-E/SP integrates MCCP and SCCP Capture/Compare/PWM modules, which provide complementary PWM outputs with programmable dead-time insertion — ideal for driving small brushless DC or stepper motors in appliances, fans, and toys. The 32 MHz core executes a sensorless BEMF or Hall-sensor commutation algorithm with plenty of MIPS headroom, while the wide 2.0 V–5.5 V supply range lets the MCU run directly from a 5 V motor rail without a regulator. The 28-pin SPDIP package simplifies bench bring-up and firmware tuning during motor commissioning, replacing multiple discrete timers and op-amps.
추천
5 V Industrial Control Modules
Industrial sensor-interface modules, digital thermostats, and process-control I/O cards often operate from a 24 V bus regulated down to 5 V. The PIC24FV08KM102-E/SP runs directly from this 5 V rail without needing a 3.3 V LDO, simplifying the power tree and reducing BOM cost. Its extended -40 °C to +125 °C temperature range qualifies it for outdoor or factory-floor installations, and the 12-bit ADC reads 4–20 mA current loops or 0–10 V analog signals with adequate resolution. The CLC plus comparator peripherals allow hardware overcurrent detection and fast shutdown independent of CPU latency.
추천
LED Lighting and Dimming Controllers
LED drivers and dimming controllers for architectural, signage, and horticultural lighting leverage the PIC24FV08KM102-E/SP's MCCP/SCCP PWM channels to generate high-resolution dimming signals at frequencies above audible range (typically 1–5 kHz), avoiding coil whine while delivering 16-bit equivalent dimming depth. The wide 2.0 V–5.5 V input range accepts both 3 V battery and 5 V USB-C power sources, while the configurable logic cell can decode DMX or 0–10 V dimming inputs in hardware, freeing CPU cycles for color-mixing algorithms. Through-hole SPDIP enables hand-soldered prototype fixtures for lighting designers.
추천
Educational MCU Development Kits
Universities, maker communities, and embedded-systems training programs favor the PIC24FV08KM102-E/SP because the 28-pin SPDIP package drops directly into a standard 28-pin socket or breadboard for quick firmware iteration without surface-mount soldering. The free MPLAB XC16 compiler and MPLAB X IDE toolchain are mature, well-documented, and supported across Windows, macOS, and Linux. Curriculum modules covering ADC, PWM, UART, I2C, and SPI peripherals can all be demonstrated on a single device, while the XLP nanoWatt technology provides a real-world example of low-power firmware design that distinguishes 16-bit PIC from older 8-bit architectures.
추천
추천 제품 요약
엔지니어링 참조 데이터: PIC24FV08KM102-E/SP — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PIC24FV08KM102-I/SP | PIC24F08KM102-E/SP | PIC24FV08KM101-I/SP | PIC24FJ16GA002-E/SP |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SPDIP-28 | SPDIP-28 - same | SPDIP-28 - same | SPDIP-28 - same | SPDIP-28 - same |
| Flash Memory | 8 KB | 8 KB | 8 KB | 4 KB | 16 KB |
| RAM | 1 KB | 1 KB | 1 KB | 0.5 KB | 8 KB |
| EEPROM | 512 B | 512 B | 512 B | 512 B | 0 B (none) |
| Operating Voltage | 2.0 V to 5.5 V | 2.0 V to 5.5 V | 1.8 V to 3.6 V | 2.0 V to 5.5 V | 2.0 V to 3.6 V |
| Core Speed | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS | 32 MHz / 16 MIPS |
| Temperature Grade | -40 °C to +125 °C (E) | -40 °C to +85 °C (I) | -40 °C to +125 °C (E) | -40 °C to +85 °C (I) | -40 °C to +125 °C (E) |
| XLP Low Power | Yes (nanoWatt XLP) | Yes (nanoWatt XLP) | Yes (nanoWatt XLP) | Yes (nanoWatt XLP) | No |
| ADC | 12-bit | 12-bit | 12-bit | 12-bit | 10-bit |
주요 차별점
- Wide 2.0 V–5.5 V operating voltage (PIC24FV variant) (vs PIC24F08KM102-E/SP)
- nanoWatt eXtreme Low Power (XLP) technology (vs PIC24FJ16GA002-E/SP)
- 12-bit ADC vs older 10-bit ADC in PIC24FJ16 family (vs PIC24FJ16GA002-E/SP)
설계 노트
Place a 100 nF ceramic decoupling capacitor (X7R, 10 V rating) within 5 mm of every VDD/AVDD pin, with the shortest possible trace to VSS. For battery-powered designs drawing sub-100 nA in deep sleep, also add a 10 µF bulk capacitor on VDD to handle transient current spikes during ADC sampling or RF transmission. The PIC24FV08KM102-E/SP's wide 2.0 V–5.5 V input range allows direct connection to 5 V USB, two-cell AA, or single-cell Li-ion batteries without an additional LDO, simplifying the power tree.
Do not leave unused I/O pins floating — configure them as digital outputs driving low to minimize parasitic current paths that can increase sleep current by 1–10 µA. When using the ADC, always include a 10 ms settling delay after switching channels and after waking from sleep to allow the internal sample-and-hold capacitor to fully charge through the source impedance. Exceeding the 5.5 V absolute maximum on any pin (including MCLR) will permanently damage the device; if exposed to industrial transients, add a TVS diode on VDD.
For through-hole SPDIP-28 prototypes, use a standard 28-pin DIP socket or solder directly into a breadboard. Keep oscillator traces short and away from high-current switching nodes (motor drivers, relay coils) to avoid corrupting the 32 MHz system clock. Route ICSP signals (PGC/RB6 and PGD/RB7) to a 6-pin header with 0.1" pitch, and add ESD protection (4.7 kΩ series + TVS to ground) on any I/O pin exposed to user touch or industrial connectors.
규정 준수 정보
RoHS and REACH compliance confirmed by Microchip product page. Not AEC-Q100 qualified — for automotive applications choose PIC24F or PIC24FJ AEC-Q100-qualified variants. Lead-free (Pb-free) per Microchip packaging marking; halogen-free status not explicitly stated on product page.
