집적 회로

하위 카테고리

📁 ADC/DAC 2519 제품 📁 증폭기 IC 797 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 304 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1588 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18735 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32815)

PIC24HJ128GP506-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP506-I/PT

PIC24HJ128GP506-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24HJ128GP506-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering up to 40 MIPS at 3.3V and offering 128 KB of Flash program memory with 8 KB of SRAM. It integrates a 10-bit ADC with up to 18 input channels, two UART, two SPI, two I2C and a CAN interface, packaged in a 64-pin TQFP (10x10 mm) suitable for industrial temperature grade -40C to +85C operation. A 16-bit microcontroller is an MCU whose internal data path, registers, and ALU are 16 bits wide, allowing single-instruction word addressing of up to 64 KB of data and significantly higher code density than 8-bit cores. The PIC24H family sits in the hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> Microchip MCU portfolio -> embedded microcontrollers -> semiconductors. These parts are designed for applications where 8-bit performance is insufficient but full 32-bit complexity is not required, such as motor control, power conversion, and sensor processing. The PIC24HJ128GP506 offers up to 53 programmable I/O pins, five 16-bit timers, and a peripheral set that includes a CAN 2.0B controller, dual UART modules with IrDA support, dual SPI ports, and dual I2C channels. The 64-pin TQFP provides ample analog and digital I/O for typical embedded designs. The device operates from 3.0V to 3.6V and includes a programmable PLL that multiplies the external oscillator to the required system clock. Architecturally, the PIC24HJ128GP506 uses a modified Harvard architecture with a 24-bit instruction word, allowing most instructions to execute in a single cycle. Its DMA-free interrupt controller provides 5-cycle latency for prioritized interrupts, and a 16-channel DMA engine (on select variants) reduces CPU load for data movement tasks. The CAN module supports CAN 2.0B active with bit rates up to 1 Mbaud, making the device suited for automotive sub-network and industrial field-bus nodes. Typical applications include industrial motor control (BLDC, PMSM, stepper), solar inverter control loops, automotive CAN nodes, building automation gateways, and medical instrumentation front-ends. The combination of 128 KB Flash and CAN makes this part especially attractive for CAN-based sensor hubs and mid-tier automotive body controllers. Engineers often pair it with MCP2551 CAN transceivers and MCP1700 LDO regulators in 3.3V power trees. When designing with this device, reserve adequate decoupling (100 nF per VDD pin plus bulk 10 uF tantalum), keep ADC traces short and away from switching nodes, and route the CAN differential pair as a 100-ohm impedance matched pair. JTAG/ICSP programming requires specific pin assignments and a 4.7 kohm pull-up on MCLR. This page synthesizes distributor pricing, drop-in same-package alternatives, and design considerations not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC24HJ128GP506A-E/MR - 16-bit 40MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP506A-E/MR

PIC24HJ128GP506A-E/MR - 16-bit 40MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506A-E/MR is a 16-bit PIC24H RISC microcontroller with 128KB of Flash program memory, 40 MIPS CPU performance, and AEC-Q100 automotive qualification, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It is a member of the high-performance PIC24H family designed for applications relying on high-speed repetitive computations and digital control. A 16-bit microcontroller (MCU) is an embedded computing device that executes instructions from a 16-bit-wide data path, providing a balance of deterministic real-time control and computational throughput. The PIC24H family sits in Microchip's dsPIC/PIC24 hierarchy, above 8-bit PIC16/PIC18 devices and below 32-bit PIC32 parts, targeting motor control, power conversion, and signal processing. This specific variant, the PIC24HJ128GP506A, is pin-compatible with the dsPIC33F family, allowing designers to migrate between general-purpose MCU and DSP-enhanced MCU parts without PCB rework. Key features of the PIC24HJ128GP506A-E/MR include 128KB (43K x 24) of self-programmable Flash with ECC, up to 8KB of RAM, two 16-bit timers, an 8-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, and a 40 MHz maximum operating frequency at 3.3V. The 64-pin VQFN package with exposed thermal pad provides a low-profile footprint suitable for space-constrained automotive and industrial modules, and AEC-Q100 Grade 1 qualification supports operation from -40C to +125C junction temperature. The device uses a Harvard architecture with a 16-bit data path and 24-bit instruction words, and includes a hardware multiply/divide unit and DSP-friendly instructions in the broader dsPIC33F/pic24H family. Multiple communication interfaces (UART, SPI, I2C) and a 16-bit PWM module make it suitable for closed-loop control loops where deterministic timing is critical. Typical applications include automotive body and powertrain ECUs, industrial motor control (BLDC/PMSM drives), digital power conversion, sensor signal conditioning, and low-power IoT edge nodes. The wide temperature range and AEC-Q100 qualification also support harsh-environment industrial automation such as factory-floor inverters and PLCs. When designing with this device, ensure the 64-pin VQFN exposed pad is soldered to a sufficient copper pour to meet the 31 C/W thermal resistance typical for this package. Decoupling capacitors must be placed as close as possible to the VDD/VSS pairs, and the ICSP programming pins (PGECx/PGEDx) must remain accessible for in-circuit firmware updates. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes not found in the manufacturer datasheet summary.

견적 요청 문의하기
PIC24HJ128GP506A-E/PT - 40 MIPS 16-Bit MCU, 128KB Flash | Microchip
PIC24HJ128GP506A-E/PT

PIC24HJ128GP506A-E/PT - 40 MIPS 16-Bit MCU, 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506A-E/PT is a 16-bit PIC24H microcontroller with 128KB (43K x 24) of Flash program memory, 40 MIPS CPU performance at 3.3V, and 53 general-purpose I/O lines in a 64-pin TQFP (10x10) package with -40C to +125C automotive-grade temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (SRAM), and peripheral interfaces on one die. The PIC24H family specifically belongs to the 16-bit MCU hierarchy: MCU -> 16-bit MCU -> PIC24 architecture -> PIC24H high-performance tier -> dsPIC33F-compatible pinout. The 'H' denotes the higher MIPS class (40 MIPS) versus the PIC24F (16 MIPS) tier. Key features include 8KB SRAM data memory, 10-bit and 12-bit ADC modules, DMA channels, multiple UART/SPI/I2C peripherals, and AEC-Q100 automotive qualification per the -E temperature suffix and Hotenda's listing. The 64-TQFP (10x10 mm) package provides 53 I/O pins plus supply/clock/programming pins, giving ample connectivity for embedded control applications while maintaining compatibility with the dsPIC33F family pinout for seamless code migration. The PIC24HJ128GP506A uses a Harvard-architecture RISC CPU with a 16-bit instruction word and 24-bit instruction width for Flash operations, allowing single-cycle execution of most instructions and deterministic interrupt latency. The 40 MIPS throughput supports high-speed digital signal processing, PID control loops, and motor drive algorithms without external DSP hardware. Typical applications include automotive body and chassis ECUs, industrial motor control, sensor signal conditioning, industrial sensor hubs, and embedded control nodes requiring deterministic real-time response at AEC-Q100 reliability levels. When designing with this MCU, ensure all VDD/VSS pairs are connected for programming/debug operation per the ICSP requirements. Use the PGECx/PGEDx pin pairs for In-Circuit Serial Programming, and place a 0.1uF decoupling capacitor near each VDD pin. This page synthesizes distributor pricing, AEC-Q100 cross-references, and design notes not aggregated in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24HJ128GP506A-H/MR - 16-bit 20MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP506A-H/MR

PIC24HJ128GP506A-H/MR - 16-bit 20MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP506A-H/MR is a 16-bit PIC24H microcontroller with 128 KB of Flash program memory and an 8 KB SRAM data space, delivering up to 20 MIPS throughput from a 40 MHz internal oscillator in a 64-pin VQFN (9x9 mm) package. According to the DigiKey listing, this device is rated for the AEC-Q100 automotive temperature range of -40C to +150C, making it suitable for under-hood and harsh-environment deployments. A 16-bit microcontroller (MCU) is a microprocessor with a 16-bit data path, registers, and ALU, sitting in the hierarchy: microcontroller -> embedded MCU -> semiconductor -> integrated circuit. The PIC24H family uses a 16-bit modified Harvard architecture with separate program and data buses, enabling single-cycle instruction fetch plus single-cycle data access. Within Microchip's portfolio the PIC24H bridges the PIC24F (low-power) and dsPIC33F (DSP) families, offering higher MIPS than PIC24F and lower cost than dsPIC33F. Key features of the PIC24HJ128GP506A-H/MR include a 12-bit ADC with up to 18 channels and 500 ksps conversion rate, two UART modules, two SPI modules, and two I2C modules. The 64-pin VQFN package exposes five 16-bit timer/counter modules, four input capture and four output compare/PWM channels, and a real-time clock-calendar with separate 32 kHz oscillator pins. The peripheral set is oriented toward closed-loop motor and power-conversion control where the 20 MIPS core can execute a single PID iteration every 50 ns. The architecture is built around a 16-bit register file and a hardware multiply unit that produces a 32-bit result in a single cycle, doubling effective DSP throughput compared with PIC24F devices. A 16-word deep shadow register bank enables fast interrupt response, and the on-chip 128 KB Flash supports self-programming under firmware control for in-field firmware updates - a critical feature for automotive ECU designs. Typical applications include BLDC/PMSM motor control, industrial sensor conditioning with on-chip ADC, automotive body and chassis modules, and consumer appliances. The AEC-Q100 grade allows direct deployment in cabin electronics and selected under-hood subsystems where ambient temperatures regularly cross 125 C. A primary design consideration is power budgeting: at 40 MHz the core draws approximately 30 mA from a 3.3 V supply. Designers should budget 100 mA headroom when the ADC, timers, and I/O banks all operate simultaneously, and ensure the QFN thermal pad is soldered to a continuous ground copper pour of at least 1 square inch. This page synthesizes Microchip datasheet parameters, AEC-Q100 qualification evidence, distributor pricing, drop-in alternatives, and practical design notes not aggregated on a single manufacturer or distributor page.

견적 요청 문의하기
PIC24HJ128GP506A-H/PT - 16-bit 20 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP506A-H/PT

PIC24HJ128GP506A-H/PT - 16-bit 20 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP506A-H/PT is a 16-bit PIC24H microcontroller IC operating at 20 MIPS with 128 KB (43K x 24) of Flash program memory and 8 KB of RAM, packaged in a 64-pin TQFP (10x10 mm). It targets automotive-grade embedded applications and is rated across a -40C to +150C junction temperature range, qualifying it under the AEC-Q100 automotive reliability standard. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces such as ADC, PWM, UART, and I/O pins. The PIC24H family is positioned in the hierarchy: 16-bit MCU -> dsPIC/PIC24 architecture -> Microchip MCU portfolio -> embedded microcontroller class. The "H" designation denotes high-performance variants within the PIC24 line, sharing pin compatibility with the dsPIC33F family for design portability. Key features of the PIC24HJ128GP506A-H/PT include 16-bit RISC architecture with modified Harvard memory layout, 53 general-purpose I/O lines, multiple DMA channels, motor-control PWM peripherals, 12-bit ADC, and high-speed analog comparators. It operates from a 3.0V to 3.6V supply and supports industrial temperature grades. The 64-pin TQFP package provides adequate I/O for multi-peripheral designs and supports in-circuit serial programming (ICSP) plus JTAG debugging via the PGECx/PGEDx pin pairs. Architecturally, the PIC24HJ128GP506A-H/PT uses a 16-bit wide datapath with a 24-bit instruction word, enabling C-compiler-friendly code density. The peripheral set is engineered for closed-loop control tasks with dedicated PWM, quadrature encoder interfaces, and high-resolution input capture. This combination delivers deterministic performance for repetitive control algorithms running at motor-control rates. Typical applications include automotive body and chassis ECUs, industrial motor drives, HVAC fan controllers, BLDC/PMSM motor control, sensor-fusion nodes, and CAN/LIN-connected lighting or sensor modules. The automotive temperature grade and AEC-Q100 compliance make it suitable for under-hood and cabin electronics requiring extended thermal margin. When designing with this device, allocate the PGECx/PGEDx pairs together for ICSP and connect every VSS/VDD pin, even unused ones, to guarantee Flash programming reliability. Use Microchip's MPLAB X IDE and the XC16 compiler for code development, and validate any new firmware against the dsPIC33F-compatible peripheral libraries for migration safety. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24H/dsPIC33F pin-compatible families, and practical design considerations (thermal, programming, debugging) not always surfaced on the manufacturer product page.

견적 요청 문의하기
PIC24HJ128GP506A-I/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip 64-VQFN
PIC24HJ128GP506A-I/MR

PIC24HJ128GP506A-I/MR - 16-bit 40MIPS 128KB Flash MCU | Microchip 64-VQFN

The Microchip PIC24HJ128GP506A-I/MR is a 16-bit RISC microcontroller built on the PIC24H CPU core, delivering up to 40 MIPS performance at 3.3V in a 64-pin VQFN (9x9) industrial-grade package. It integrates 128 KB of Flash program memory and 8 KB of SRAM, providing ample headroom for embedded control and signal-processing applications that demand deterministic real-time execution at high code density. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working RAM, and a rich set of peripherals such as ADC, PWM, UART, SPI and I2C. Within the semiconductor hierarchy, the PIC24HJ128GP506A belongs to the 16-bit MCU class -> microcontroller family -> embedded processor category -> semiconductor IC. The "PIC24H" sub-family is Microchip's high-performance 16-bit tier, sitting above the cost-optimized PIC24F and below the dsPIC33F DSP-enhanced parts, making it well suited to closed-loop control loops, motor drive, and high-speed sensor interfacing. Key features include a 16-channel 12-bit ADC capable of 500 ksps conversion, up to eight PWM outputs with edge-aligned or center-aligned modes, two UART, two SPI and two I2C peripherals, and a 16-bit timer/counter bank. The device also exposes multiple DMA channels that offload data movement between peripherals and RAM, freeing CPU cycles for application logic. The wide 3.0V to 3.6V supply range, dual Watchdog Timer and Fail-Safe Clock Monitor support robust industrial deployments. The ICSP/In-Circuit programming interface enables in-field firmware updates without removing the device from the PCB. Typical applications include industrial motor control (BLDC/PMSM FOC), digital signal processing front-ends, multi-channel data acquisition, point-of-load system monitoring, and embedded control for medical and consumer appliances. The 64-VQFN package exposes up to 53 digital I/O pins, supporting parallel sensor buses and human-interface buttons/LEDs simultaneously. Pair the MCU with an external EEPROM or serial Flash for data logging, and use the integrated 12-bit ADC for transducer readout. When laying out the PCB, place the 64-VQFN exposed pad (EP) directly over a top-layer copper pour stitched with thermal vias to inner ground layers to keep junction temperature within the -40C to +85C industrial range. The PIC24HJ128GP506A-I/MR is pin-compatible with the PIC24HJ128GP306A-I/MR and PIC24HJ128GP306-I/MR variants, simplifying PCB reuse across the 128/64 KB Flash tiers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24HJ128GP506A-I/PT - 40 MIPS 16-bit MCU 128KB Flash TQFP-64
PIC24HJ128GP506A-I/PT

PIC24HJ128GP506A-I/PT - 40 MIPS 16-bit MCU 128KB Flash TQFP-64

The Microchip Technology PIC24HJ128GP506A-I/PT is a high-performance 16-bit PIC24H microcontroller delivering up to 40 MIPS at 3.3V, packaged in a 64-pin TQFP (10x10 mm). It integrates 128 KB of Flash program memory organized as 43K x 24 words, 8 KB of SRAM data memory, and a DMA controller for CPU-offload data movement. The device operates from a 2.0V to 3.6V supply and supports an industrial temperature range of -40C to +85C, making it suitable for harsh embedded environments. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The 16-bit class sits between 8-bit MCUs (low power, low cost) and 32-bit MCUs (high performance); it offers a sweet spot of deterministic interrupt response, abundant I/O, and DSP-friendly math. Within that class, the PIC24H family is the highest MIPS tier from Microchip, sharing a MIPS-like instruction set with the dsPIC33F DSP-capable siblings. Key features include a 16-channel 10/12-bit ADC with 500 ksps throughput, two UART, two SPI, two I2C, an ECAN module, five 16-bit timers, nine 16-bit PWM outputs, and a parallel master port. The integrated DMA engine handles ADC-to-memory and memory-to-peripheral transfers without CPU intervention, freeing the core for control loops. Enhanced I/O includes 53 general-purpose digital I/O lines, each with interrupt-on-change support, plus 5V-tolerant inputs on most pins. The PIC24H core uses a 5-stage pipeline with single-cycle multiply and hardware divide, plus zero-overhead loop support for tight control code. The 24-bit instruction word gives dense code, and the architecture is fully pin-compatible with the dsPIC33F family, so a code drop-in upgrade to DSP is possible on the same PCB. Integrated peripherals such as the 10-bit ADC, comparators, and configurable logic cells reduce external component count. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion, sensor signal conditioning, automotive body and chassis modules, and point-of-sale terminals. The wide 5V-tolerant I/O simplifies interfacing to legacy 5V logic, while the CAN bus and PWM peripherals cover automotive and industrial fieldbus needs. When designing with this part, plan the 3.3V rail carefully: at 40 MIPS the core draws roughly 30 mA, so a low-noise LDO such as the MCP1700 or a small DC-DC is recommended. Add 0.1 uF and 1 uF decoupling near each VDD/VSS pair and follow Microchip's recommended 2-layer or 4-layer stack-up with a continuous ground plane for EMI control. This page synthesizes distributor pricing, drop-in alternatives from the same PIC24H family and cross-brand pin-compatible MCUs, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24HJ128GP506AT-I/MR - 40 MIPS 16-bit MCU 128KB Flash 64-VQFN | Microchip
PIC24HJ128GP506AT-I/MR

PIC24HJ128GP506AT-I/MR - 40 MIPS 16-bit MCU 128KB Flash 64-VQFN | Microchip

The Microchip Technology PIC24HJ128GP506AT-I/MR is a 16-bit general-purpose microcontroller from the PIC24H family, offering 40 MIPS CPU performance with 128 KB (43K x 24) of Flash program memory in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It is specified for the industrial -40C to +85C temperature range and ships in tape-and-reel packaging. A 16-bit microcontroller (MCU) is a programmable integrated circuit that executes instructions on a 16-bit data path, delivering higher code density and arithmetic throughput than 8-bit MCUs while retaining deterministic real-time behaviour. The PIC24H family belongs to Microchip's broader PIC24F/dsPIC30F/dsPIC33F/PIC24H 16-bit MCU portfolio, which sits above 8-bit PIC10/12/16/18 devices in performance and below 32-bit PIC32 devices in code size. PIC24H MCUs are well-suited for motor control, digital power conversion, and high-speed sensor processing. Key features of this part include a 40 MHz maximum operating frequency (40 MIPS at the instruction cycle rate), 16 KB SRAM, 4 KB EEPROM, a 16-channel 10-bit/12-bit ADC, multiple SPI/I2C/UART peripherals, a Parallel Master Port, and a 16-bit timer/counter block. The modified Harvard architecture with a 16-bit wide datapath and 24-bit instructions enables efficient C-compiled code while keeping deterministic interrupt latency. Typical applications include industrial motor control (BLDC, PMSM, stepper), digital power conversion (PFC, LLC), sensor signal processing, and general-purpose embedded control. Compared with 32-bit Cortex-M0 alternatives at similar MHz, the PIC24HJ128GP506A delivers a richer DSP-friendly instruction set and tighter interrupt determinism, at the cost of a smaller ecosystem and less RAM. The wide -40C to +85C industrial range supports factory-floor deployment without additional qualification. When designing with this device, plan the power-rail decoupling around a 3.3V analog/digital supply pair, route the exposed pad to a continuous ground copper pour, and use the on-chip Peripheral Pin Select (PPS) feature to remap digital peripherals onto spare pins. Refer to Microchip application note AN1066 for migration paths from PIC24F/dsPIC30F devices, which share a pin-compatible footprint family.

견적 요청 문의하기
PIC24HJ128GP506AT-I/PT - 40 MIPS 16-bit MCU 128KB Flash | Microchip
PIC24HJ128GP506AT-I/PT

PIC24HJ128GP506AT-I/PT - 40 MIPS 16-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506AT-I/PT is a high-performance 16-bit microcontroller from the PIC24H family that delivers up to 40 MIPS throughput, integrates 128 KB of Flash program memory and 8 KB of RAM, and is housed in a 64-pin TQFP (10x10 mm) package. It operates from a 3.0V to 3.6V supply and provides 53 general-purpose I/O pins, making it suitable for real-time control and high-speed signal processing applications. This member of the PIC24HJ128GP506A family uses the same PIC24H Harvard architecture that allows seamless migration to and from dsPIC30F, dsPIC33F, and PIC24F devices. A PIC24H microcontroller is a 16-bit RISC processor that combines an advanced modified Harvard architecture with DSP-oriented instructions, positioning it in the broader category of microcontrollers -> 16-bit MCUs -> embedded controllers -> semiconductor ICs. The 'H' suffix indicates the highest performance tier of the PIC24 family, achieving up to 40 MIPS at 3.3V while maintaining code compatibility with the PIC24F and dsPIC families. PIC24H MCUs typically feature DMA controllers, motor-control PWMs, and enhanced peripherals designed for motor drive, power conversion, and high-speed sensor interfacing. Key differentiating features of the PIC24HJ128GP506AT-I/PT include the 128 KB (43K x 24 instruction words) Flash, 8 KB RAM, hardware multiplier, four 16-bit timer/counters, up to four UART, two SPI, two I2C, and a 16-channel 10/12-bit ADC. The device also provides two analog comparators, a real-time clock and calendar (RTCC) with calendar mode, and a charge time measurement unit (CTMU) for capacitive touch and accurate timing measurements. These peripherals allow engineers to implement complex control loops, sensor interfaces, and communications stacks without external ICs. The architecture employs a 16-bit datapath with a modified Harvard structure that allows a 24-bit instruction word, providing code density comparable to 32-bit MCUs while maintaining low power consumption. The device also supports 16-channel DMA, reducing CPU load for high-throughput data movement between peripherals and memory. Combined with hardware-level IEC 60730 Class B support libraries, this simplifies functional-safety firmware development for household appliances. Typical applications include industrial motor control (BLDC, PMSM, AC induction), digital power conversion (SMPS, UPS, solar inverter MPPT), automotive body and chassis ECUs, medical instrumentation, and high-speed sensor fusion. The wide operating temperature range (-40C to +85C, 'I' grade) makes it suitable for industrial environments, and the 64-pin TQFP footprint allows straightforward PCB routing with a generous ground and power pin count for noise immunity. Designers should consider the 'T' suffix which denotes a tape-and-reel packaging option and the 'A' silicon revision. The part is pin-compatible with the dsPIC33FJ128GP306A family and the PIC24HJ128GP306A family, simplifying platform migration. When migrating to lower-cost variants, the PIC24HJ128GP506A-I/PT (tray) or PIC24HJ128GP506AT-I/MR (QFN) provide functionally identical alternatives in different footprints or packaging. This page consolidates distributor pricing, drop-in alternatives, and application design guidance drawn from the Microchip PIC24HJ128GP506 datasheet, supplementing the manufacturer documentation with comparative insight that is not available on a standalone product page.

견적 요청 문의하기
PIC24HJ128GP506T-I/PT - 16-bit 40MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP506T-I/PT

PIC24HJ128GP506T-I/PT - 16-bit 40MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP506T-I/PT is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at 3.3V in a 64-pin TQFP (10x10 mm) package. It integrates 128KB (43K x 24) of Flash program memory, 8KB RAM, and a rich set of on-chip peripherals suited for general-purpose and real-time embedded control. The 'T' suffix indicates Tape & Reel packaging, while the 'I' industrial temperature grade extends operation from -40C to +85C, and 'PT' specifies the TQFP-64 package. A 16-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating CPU, RAM, non-volatile program memory, and peripherals on a single silicon die. PIC24H MCUs use a modified Harvard architecture with 24-bit wide instructions and 16-bit data paths, giving them excellent code density and deterministic execution. They sit in Microchip's hierarchy between the 8-bit PIC18 and the digital-signal-controller dsPIC33 families, and are commonly chosen when an 8-bit MCU is too slow but a full DSP engine is unnecessary. Key features of the PIC24HJ128GP506 include 18 channels of 10-bit or 12-bit ADC (mixed), hardware multiplier and divider for fast math, an internal oscillator, and a broad communication peripheral set: CAN, I2C, IrDA, LIN, SPI, and UART/USART. Brown-out reset and watchdog protection are integrated, and the device supports 3.0V to 3.6V single-supply operation. Typical applications span motor control, industrial automation, smart sensors, automotive body and chassis ECUs, building automation, and consumer appliances where deterministic 16-bit performance, CAN connectivity, and an industrial temperature range are required in a single MCU. When designing with this device, ensure the VDD rail is decoupled with at least 100 nF plus bulk capacitance near the supply pins, and follow Microchip's programming specification for in-circuit serial programming (ICSP) pin assignment to retain debug access.

견적 요청 문의하기
PIC24HJ128GP510-I/PT - 40 MIPS 16-bit MCU 128KB Flash 100-TQFP | Microchip
PIC24HJ128GP510-I/PT

PIC24HJ128GP510-I/PT - 40 MIPS 16-bit MCU 128KB Flash 100-TQFP | Microchip

The Microchip Technology PIC24HJ128GP510-I/PT is a 16-bit PIC24H microcontroller delivering 40 MIPS CPU performance with 128 KB Flash program memory and 8 KB RAM, housed in a 100-pin TQFP (PT) 12x12 mm package rated for -40C to +85C industrial operation. A PIC24H microcontroller is a member of Microchip's 16-bit MCU family, designed for high-speed, deterministic control applications. Positioned in the taxonomy: PIC24H -> PIC24 family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor, the PIC24H variant adds a high-performance 40 MIPS core with hardware multipliers and DSP-friendly instructions, while remaining pin-compatible with the dsPIC33F DSC family for migration flexibility. Key features of the PIC24HJ128GP510-I/PT include 128 KB (43K x 24) self-programmable Flash, 8 KB SRAM, a 16-channel 10/12-bit ADC, four 16-bit timers, two UART, two SPI, one I2C, and two CAN modules that make it ideal for industrial automation and motor-control bridges. The 40 MIPS throughput at 3.0-3.6V VDD supports high-bandwidth control loops. The 100-pin TQFP (PT) package exposes 85 I/O pins for expansive peripheral integration. Architecturally, the PIC24HJ128GP510-I/PT uses a modified Harvard 16-bit core with a 16x16 hardware multiplier and 40-bit accumulator, executing most instructions in one cycle. This MCU shares its peripheral set and pinout with the dsPIC33F family, allowing firmware migration when DSP instructions become desirable. Typical applications include industrial automation controllers, BLDC/PMSM motor drives, multi-axis CNC front-ends, sensor-fusion boards, and CAN-graphical design. In automotive body electronics (non-safety) and HVAC, the dual CAN peripherals provide robust node communication without an external transceiver pair mismatch. Design consideration: when migrating from PIC24F or dsPIC33F, verify the peripheral pin select (PPS) mapping since PPS enables flexible peripheral routing on select pins; ensure 3.3V rail decoupling includes 100 nF + 10 uF bulk per VDD/AVDD pair. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select, source, and qualify the part quickly.

견적 요청 문의하기
PIC24HJ128GP510A-E/PF - 40 MIPS 128KB Flash 16-bit MCU | Microchip
PIC24HJ128GP510A-E/PF

PIC24HJ128GP510A-E/PF - 40 MIPS 128KB Flash 16-bit MCU | Microchip

The Microchip Technology PIC24HJ128GP510A-E/PF is a high-performance 16-bit PIC24H microcontroller featuring 128KB of Flash program memory, 8KB of RAM, and 40 MIPS execution speed at 3.3V, housed in a 100-pin TQFP (14x14 mm) package. The device is AEC-Q100 qualified for automotive applications and operates across an extended -40C to +125C temperature range. A 16-bit microcontroller (MCU) is a microprocessor core that processes data and instructions in 16-bit wide paths, occupying a middle position in the embedded hierarchy: 8-bit MCU (low-cost, simple control) -> 16-bit MCU (balanced performance and peripherals, real-time control) -> 32-bit MCU (high-performance, RTOS, connectivity). The PIC24H family uses a modified Harvard RISC architecture with a 16-bit data path and 24-bit instruction word, enabling single-cycle MAC operations and DSP-friendly addressing for signal processing and motor control applications. Key features include 40 MIPS performance from a 40 MHz oscillator, dual 16-bit timers, a 10/12-bit ADC with up to 32 channels, two UART/SPI/I2C peripherals, an Enhanced CAN module, and a Parallel Master Port for off-chip memory expansion. The 128KB self-programmable Flash supports In-Circuit Serial Programming (ICSP) and a 16-bit-wide data path enables DSP-class throughput for embedded signal-processing tasks. The PIC24HJ128GP510A-E/PF is pin-compatible with the dsPIC33F family, allowing migration to DSP-enhanced variants without PCB rework. Internal phase-locked loops (PLLs) multiply the external oscillator to 40 MHz, while the wide 3.0-3.6V supply range and low-power sleep modes simplify battery-backed designs. The extended (-E) temperature grade and AEC-Q100 qualification make this variant the proper choice for under-hood and industrial environments. Typical applications include automotive body and chassis controllers, industrial motor drives, medical instrumentation, and high-performance sensor hubs. The combination of CAN, ADC, and 16-bit DSP-class throughput makes it a strong fit for real-time closed-loop control. When designing with this part, allocate sufficient decoupling (100 nF ceramic plus 10 uF bulk) close to each VDD/VSS pair, keep ADC traces short and referenced to analog ground, and use the on-chip PLL with a low-frequency crystal to minimise EMI. Configure the JTAG/ICSP pins carefully during layout to avoid in-circuit programming conflicts. This page synthesises distributor pricing, cross-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24HJ128GP510A-E/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP510A-E/PT

PIC24HJ128GP510A-E/PT - 16-bit 40MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP510A-E/PT is a 16-bit PIC24H microcontroller running up to 40 MIPS at 40 MHz with 128 KB (43K x 24) of Flash program memory and 8 KB of SRAM, housed in a 100-pin TQFP (PT) package. It operates from 3.0V to 3.6V, integrates a 12-bit ADC up to 1.1 Msps, multiple UART/SPI/I2C peripherals, DMA, and a 16-bit wide data path tuned for high-speed DSP-style control loops. The -E suffix indicates the Extended (-40C to +125C) operating temperature range and AEC-Q100 automotive qualification. A 16-bit microcontroller (MCU) is a programmable processor that executes instructions on 16-bit-wide data and address paths, sitting in the hierarchy between 8-bit MCUs (e.g., PIC16, PIC18) and 32-bit MCUs (e.g., PIC32, ARM Cortex-M). The PIC24H family specifically targets high-performance control applications where 8-bit MCUs lack throughput but full 32-bit parts would add cost and complexity, and the PIC24HJ128GP510A is the top-of-family part with 128 KB Flash and 100-pin package density. PIC24H devices share peripheral compatibility with the dsPIC33F DSP-enhanced family, enabling tool reuse and code migration. Key features include 40 MIPS execution from a 40 MHz internal oscillator with 4x-8x PLL options, a hardware multiplier that completes a 16x16-bit multiply in one cycle, dual 40-bit accumulators (dsPIC33F-compatible context), 16-channel 12-bit ADC with up to 1.1 Msps, eight 16-bit timers, two UART modules, two SPI ports, and two I2C ports. A 16-channel DMA controller reduces CPU load for data-mover tasks such as ADC-to-memory or peripheral-to-memory transfers, while the Peripheral Pin Select (PPS) remapping adds routing flexibility for the high pin count. Typical applications include automotive body and chassis control modules, industrial motor control and variable-frequency drives, switched-mode power supply (SMPS) digital control loops, sensor signal conditioning, and consumer audio processing front ends. The AEC-Q100 qualification on the -E variant makes it directly usable under-the-hood and in cabin ECUs across multiple OEMs without requalification, while the 100-pin TQFP exposes enough GPIO for multi-axis motor or multi-rail power systems. When designing with this device, place 0.1 uF ceramic decoupling on every VDD/AVDD pin pair as close to the package as possible and provide a 10 uF bulk capacitor on the 3.3V rail. Configure the PLL with reference to the Fosc PLL block diagram and respect the VCO range limits in the datasheet's electrical characteristics table to avoid jitter and out-of-spec core clocks. Unused pins should be configured as outputs low or inputs with the internal weak pull-up enabled to minimize sleep current in low-duty-cycle applications. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application notes, and practical design notes not collected in the manufacturer datasheet alone. The pin-compatible replacements listed below all share the same 100-pin TQFP footprint, allowing PCB layout reuse without rework.

견적 요청 문의하기
PIC24HJ128GP510A-H/PF - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP510A-H/PF

PIC24HJ128GP510A-H/PF - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip PIC24HJ128GP510A-H/PF is a 16-bit PIC24H microcontroller with 128 KB of Flash program memory (43K x 24 words), 8 KB of SRAM, and a 40 MIPS modified Harvard RISC core, housed in a 100-pin TQFP (14x14 mm) package with AEC-Q100 automotive qualification. The "-H" temperature grade corresponds to an extended industrial range of -40C to +150C, and the "A" suffix denotes the silicon revision that lifts performance from 30 to 40 MIPS at 3.0-3.6 V. What is a PIC24 microcontroller? The PIC24 is Microchip's 16-bit MCU family that occupies the middle ground between 8-bit PIC16/PIC18 parts and 32-bit PIC32 parts. It uses a 16-bit modified Harvard architecture with a 24-bit instruction word, which delivers roughly 3-5x the compute density of an 8-bit MCU while remaining C-friendly and inexpensive. PIC24H devices add hardware DSP-like support (bit-field manipulation, multiply-accumulate instructions) and DMA, targeting motor control, sensor processing, and real-time control applications where deterministic latency is critical. Key features of the PIC24HJ128GP510A-H/PF include: up to 40 MIPS CPU speed at 3.3 V, 128 KB self-programmable Flash with 10K-erase endurance, 16 KB RAM in the silicon revision A datasheet (note: some distributors list 8 KB; verify against the silicon errata), 8-channel DMA, up to 9 PWM outputs with dedicated time bases, a 12-bit 1.1 Msps ADC with up to 32 channels, two UART, two SPI, one I2C, one CAN, and a 16-bit timer/capture/compare array. Technical depth: the part is built on a 5-stage pipeline, executes most instructions in 1 cycle, and supports interrupt nesting with 8 user-selectable priority levels and up to 5 external interrupts. The internal 7.37 MHz Fast RC oscillator can be paired with the PLL to derive 80 MHz Fosc (40 MIPS Fcy), and a 32 kHz secondary oscillator supports low-power RTCC operation. The 100-pin TQFP exposes 85 I/O pins, supports 5V-tolerant digital inputs on most pins, and integrates a charge-time-measurement-unit (CTMU) for capacitive touch and mA-range current measurement. Typical applications include automotive body and chassis ECUs (BCM, HVAC, instrument clusters), industrial motor control (BLDC, PMSM, FOC), 3-phase uninterruptible power supplies, solar micro-inverters, point-of-sale terminals, and CAN-connected sensor hubs. The wide operating range and AEC-Q100 qualification also suit off-road vehicle controllers and heavy industrial PLCs. When designing with this device, allocate the 16-bit address space carefully: the 43K x 24 Flash is mapped as instructions rather than bytes, so a 128 KB Flash equals 128 K instructions. For bootloaders, reserve the top 2-4 pages for the bootloader vector and use the dual-partition Flash mode for fail-safe firmware updates. This page synthesizes distributor pricing, AEC-Q100 qualification status, drop-in same-package alternatives from the PIC24H and dsPIC33F families, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC24HJ128GP510A-H/PT - 16-bit 20MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP510A-H/PT

PIC24HJ128GP510A-H/PT - 16-bit 20MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP510A-H/PT is a 16-bit PIC microcontroller from the PIC24H family, delivering 20 MIPS of computational throughput with 128 KB of FLASH program memory (43K x 24) and 8 KB of RAM, housed in a 100-pin TQFP (PT) package rated for automotive (AEC-Q100) temperature grades. The device operates from a 3.0V to 3.6V supply and integrates peripherals including DMA, POR, PWM, and a Watchdog Timer with brown-out detect and reset. Background context: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically FLASH), volatile data memory (RAM), and a rich peripheral set into one package. The PIC24H belongs to Microchip's 16-bit MCU category, which sits hierarchically between 8-bit PIC10/12/16/18 devices and 32-bit PIC32 devices. PIC24H MCUs use a modified Harvard architecture with a 16-bit data path and a 24-bit instruction word, optimized for high-speed repetitive computation and closed-loop control tasks such as motor drive, power conversion, and DSP-style signal conditioning. Key features of the PIC24HJ128GP510A-H/PT include its 16-bit core running at 20 MIPS, 128 KB self-programmable FLASH, 8 KB RAM, an 8-channel DMA controller, multiple PWM modules suitable for motor and power control, and a CAN 2.0B interface for automotive networking. The -H temperature grade extends the operating range from -40C to +150C, and the device is AEC-Q100 qualified for automotive electronics. The 100-pin TQFP package provides extensive I/O (up to 85 I/O pins), supporting numerous analog and digital peripheral assignments. Technically, the PIC24HJ128GP510A-H/PT uses a 16-bit modified-Harvard CPU with hardware multiply/divide and a 16x16-bit single-cycle MAC. It shares pin compatibility with the dsPIC33F family, enabling migration to DSP-enhanced variants without PCB rework. The 100-pin TQFP package measures 12 x 12 mm with a 0.5 mm pitch, providing sufficient pin count for full peripheral utilization including dual CAN, USB, and multiple UART/SPI/I2C interfaces. Typical applications include automotive body and chassis control, BLDC/PMSM motor drive, industrial automation controllers, sensor signal processing with the integrated 12-bit ADC, and CAN-connected distributed control nodes. The high MIPS count and DMA support make it suitable for real-time control loops where deterministic response is required. Designers should plan PCB layout for the 0.5 mm pitch TQFP, use the recommended MPLAB X IDE with XC16 compiler, and consider the AEC-Q100 -H grade for under-hood or harsh-environment automotive use. Migration paths to the lower-temperature -I grade or to the dsPIC33F DSP family are straightforward due to pin compatibility. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design considerations not collected in the manufacturer datasheet alone.

견적 요청 문의하기
PIC24HJ128GP510A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip
PIC24HJ128GP510A-I/PT

PIC24HJ128GP510A-I/PT - 16-bit 40 MIPS 128KB Flash MCU | Microchip

The Microchip Technology PIC24HJ128GP510A-I/PT is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS of CPU throughput from a 16-bit modified Harvard architecture in a 100-pin TQFP package. It integrates 128 KB of Flash program memory (43K x 24 words), 8 KB of SRAM data memory, and 85 general-purpose I/O lines, and is positioned for high-speed repetitive computation and closed-loop digital control. Background: A microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich set of peripherals on one die. The PIC24H sits inside Microchip's 16-bit MCU portfolio, which itself is part of the broader microcontroller -> embedded processor -> semiconductor product hierarchy. The 'J' suffix indicates the dsPIC33F-compatible enhanced core, and the family is pin-compatible with the dsPIC33F signal-controller line, simplifying migration between pure control and DSP-augmented designs. Key features include a 16-bit data path, single-cycle 16x16 MAC hardware, hardware DMA controller with 8 channels, two UART modules, two SPI modules, two I2C modules, two CAN modules, an ECAN module, a Parallel Master Port (PMP), a 10-bit A/D converter with up to 32 input channels and 500 ksps conversion rate, a 16-bit timer/counter, and a JTAG boundary-scan interface for in-system debug. The 100-pin TQFP (12x12 mm) package provides ample I/O for parallel-bus and mixed-signal designs. Architecturally, the PIC24HJ128GP510A uses a 40 MHz internal oscillator with a 4-phase PLL and shadow register sets for fast interrupt response. The DMA engine offloads data movement between peripherals and memory, freeing the core for control algorithms. The 10-bit ADC integrates sample-and-hold and multiple trigger sources, enabling synchronized multi-channel sampling without CPU intervention. Typical applications include industrial motor control (BLDC, PMSM, AC induction), digital power conversion (SMPS, PFC), automotive body and chassis ECUs, medical instrumentation, high-performance sensor-fusion nodes, and CAN-connected industrial automation. The combination of CAN, ECAN, UART and JTAG makes it especially attractive for networked embedded systems. When designing with this device, reserve a 4-pin header for the ICD 3 debugger/programmer and decouple every VDD/AVDD pin with a 100 nF X7R ceramic placed within 5 mm. For ADC accuracy, isolate AVSS from digital ground with a single-point connection or ferrite bead; the 10-bit ADC requires careful analog-layout practice. This page synthesizes the Microchip datasheet, current distributor pricing, drop-in alternatives from the same PIC24H pin-compatible family, and practical design notes that are not collected in any single manufacturer document.

견적 요청 문의하기
PIC24HJ128GP510AT-I/PF - 16-bit 40MIPS 128KB Flash MCU | TQFP-100
PIC24HJ128GP510AT-I/PF

PIC24HJ128GP510AT-I/PF - 16-bit 40MIPS 128KB Flash MCU | TQFP-100

The Microchip Technology PIC24HJ128GP510AT-I/PF is a 16-bit microcontroller from the PIC24H family that delivers 40 MIPS performance at 3.3V, integrating 128 KB program Flash and 8 KB SRAM in a 100-pin TQFP (14x14 mm) package with 85 general-purpose I/O pins. The device is part of the PIC24HJ128GP510A silicon revision (A denotes the second die revision with peripheral improvements), and the 'T' suffix indicates tape-and-reel packaging, while 'I/PF' specifies the -40°C to +85°C industrial temperature range and the 100-pin TQFP package. A 16-bit microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile Flash program memory, volatile SRAM, and configurable peripherals such as timers, ADC modules, communication interfaces, and GPIO. 16-bit MCUs occupy the performance tier between 8-bit parts (PIC16, 8051) and 32-bit Cortex-M parts, and the PIC24H family specifically targets high-speed digital-signal-control and motor-control applications. The PIC24HJ128GP510AT-I/PF belongs to the broader category of microcontrollers > digital signal controllers > integrated circuits. Key features of the PIC24HJ128GP510AT-I/PF include up to 40 MIPS operation from a 3.0 V to 3.6 V supply, 128 KB (43K x 24 instruction words) self-programmable Flash, 8 KB SRAM, two 3-wire SPI modules, two I2C modules, two UART modules, two CAN modules, two 16-channel 10/12-bit ADC modules, and a hardware multiplier for DSP-class operations. The 85 GPIO pins tolerate 5V input on most pins, simplifying mixed-voltage designs with legacy 5V peripherals. Architecture-wise the PIC24HJ128GP510A revision uses a modified Harvard architecture with separate 24-bit program and 16-bit data paths, a 16 x 16-bit single-cycle hardware multiplier, and a 40-bit barrel shifter. This gives the device enough headroom for PID loops, motor-control algorithms, and basic DSP filters while remaining fully programmable in plain C through Microchip's MPLAB XC16 toolchain. The 100-pin TQFP package also enables pin-compatibility with the dsPIC33F family for migration paths to DSP-extended parts. Typical applications include industrial motor control (BLDC, PMSM, stepper), sensor interfaces, factory automation, LED lighting controllers, uninterruptible power supplies (UPS), and CAN-bus node endpoints. Industrial control boards particularly value the device's two CAN 2.0B modules plus 5V-tolerant GPIOs for interfacing to legacy industrial buses. When designing with this MCU, reserve at least 2 pF of decoupling per VDD/AVDD pin and follow Microchip's recommended 16 MHz external crystal or 7.37 MHz internal FRC + PLL configuration to hit the maximum 40 MIPS throughput. The 'I' (industrial) grade variant is the correct choice for non-automotive deployments; for AEC-Q100-qualified automotive applications, switch to the corresponding 'F' (automotive) grade device.

견적 요청 문의하기
PIC24HJ128GP510AT-I/PT - 16-bit 40MIPS MCU 128KB Flash | Microchip
PIC24HJ128GP510AT-I/PT

PIC24HJ128GP510AT-I/PT - 16-bit 40MIPS MCU 128KB Flash | Microchip

The Microchip Technology PIC24HJ128GP510AT-I/PT is a 16-bit microcontroller from the PIC24H family, delivering 40 MIPS performance at 40 MHz with 128 KB of Flash program memory (43K x 24 words) and 8 KB of RAM, housed in a 100-pin TQFP (12x12 mm) package. The device integrates a 16-channel 10/12-bit ADC, multiple UART/SPI/I2C peripherals, DMA, and motor control PWMs, while operating from a 3.0 V to 3.6 V supply. A 16-bit microcontroller (MCU) is a microprocessor that processes data 16 bits at a time, sitting between 8-bit MCUs (lower cost, simpler control) and 32-bit MCUs (higher throughput, more complex OS). The PIC24H architecture uses a modified Harvard RISC core with deterministic interrupt latency and a single-cycle hardware multiplier/DSP engine, positioning it between the 8-bit PIC18 family and the 32-bit PIC32/PIC32MM families in Microchip's portfolio. Key features include 128 KB Flash, 8 KB RAM, 53 digital I/O pins, four 16-bit timers, two UART/SPI/I2C ports, ECAN, a 16-channel 12-bit ADC with 500 ksps throughput, and a parallel master port (PMP). The industrial-grade -40C to +85C operating range suits process control and motor drive applications. The wide peripheral set replaces glue logic and external ADCs in many designs. The PIC24HJ128GP510A die uses 0.25-micron CMOS with on-chip voltage scaling and a phase-locked loop (PLL) to derive 40 MIPS from a 10 MHz crystal, while a redundant watchdog timer and dual brown-out reset improve field reliability. The instruction set is fully compatible with the dsPIC33F DSC family, so firmware is portable between control-only and DSP+control designs. Typical applications include industrial motor control (BLDC, PMSM, stepper), power conversion (digital PFC, solar micro-inverter), factory automation PLCs, automotive sensor interfaces, and medical instrumentation. The combination of CAN/ECAN, motor-control PWMs and a 12-bit ADC makes it well suited for closed-loop motor and power-electronic control. When designing with this device, allocate a 4-byte configuration word in Flash, decouple the analog and digital VDD rails separately, and follow Microchip's emulator header layout for MPLAB REAL ICE/ICD debugging. Use the DMA controller for ADC-to-memory transfers to free the CPU for control loops.

견적 요청 문의하기
PIC24HJ128GP510T-I/PF - 40 MIPS 16-bit MCU, 128KB Flash, 100-TQFP | Microchip
PIC24HJ128GP510T-I/PF

PIC24HJ128GP510T-I/PF - 40 MIPS 16-bit MCU, 128KB Flash, 100-TQFP | Microchip

The Microchip Technology PIC24HJ128GP510T-I/PF is a 16-bit general-purpose microcontroller from the PIC24H family, featuring a modified Harvard RISC architecture with up to 40 MIPS performance at 3.3V, 128 KB of Flash program memory, and 8 KB of SRAM, housed in a 100-pin TQFP (PF) package. The "T" suffix denotes Tape and Reel packaging for high-volume manufacturing, while the "I" indicates the industrial -40C to +85C operating temperature range. A 16-bit microcontroller (MCU) is an integrated processor core that executes instructions on 16-bit-wide data paths, delivering higher computational throughput and code density than 8-bit alternatives. Within the broader semiconductor taxonomy, an MCU sits inside the microcontroller sub-category of microcontrollers, which itself belongs to integrated circuits and ultimately to semiconductors. The PIC24H family specifically targets applications that demand deterministic real-time control, such as motor drives, power conversion, and multi-channel sensor processing, while sharing peripheral libraries and development tools with PIC24F, dsPIC30F, and dsPIC33F devices for seamless migration. Key features include a C-compiler friendly instruction set with 16-bit-wide data paths, a 16-channel 10-bit ADC capable of 1 Msps conversion, multiple UART/SPI/I2C interfaces, hardware CRC, and a 16-bit timer/counter array. The 100-TQFP package exposes 85 I/O pins, providing extensive connectivity for parallel buses, multiple ADC inputs, and PWM outputs. The device supports 3.0V to 3.6V single-supply operation, simplifying board design by eliminating the need for separate analog and digital rails. The PIC24HJ128GP510 architecture employs a 5-stage pipeline, single-cycle multiply, and 16x16-bit hardware MAC, enabling efficient DSP-like operations in firmware. Its deterministic interrupt latency of 5 cycles supports tight closed-loop control loops in motor and power applications. The integrated DMA controller can move data between peripherals and memory without CPU intervention, freeing the core for computational tasks. Typical applications include industrial motor control (BLDC/PMSM sensorless drives), digital power conversion (PFC + LLC resonant converters), HVAC fan controllers, multi-channel data acquisition systems, and portable medical instrumentation. The combination of high-speed ADC and PWM peripherals makes this MCU particularly suited to digital power and motor-control designs running field-oriented firmware. When designing with the PIC24HJ128GP510T-I/PF, ensure decoupling capacitors are placed within 5 mm of each VDD/VSS pair, and route ADC analog traces away from PWM switching nodes to avoid coupling noise into measurements. Use the peripheral library and MPLAB X IDE with the XC16 toolchain for code development. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate this MCU for new designs and second-source risk management.

견적 요청 문의하기
PIC24HJ12GP201-E/P - 16-bit 40MIPS MCU 12KB Flash | Microchip
PIC24HJ12GP201-E/P

PIC24HJ12GP201-E/P - 16-bit 40MIPS MCU 12KB Flash | Microchip

The Microchip Technology PIC24HJ12GP201-E/P is a 16-bit PIC24H microcontroller built on a modified Harvard architecture with a 24-bit instruction word and 16-bit data path, delivering 40 MIPS at 40 MHz in an 18-pin PDIP through-hole package. It integrates 12 KB (4K x 24) of Flash program memory, 1 KB of SRAM, and a 16-channel 10/12-bit ADC with 500 ksps throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one die. The PIC24H family sits in the 16-bit tier of the PIC24/dsPIC33 architecture hierarchy (8-bit PIC16/PIC18 -> 16-bit PIC24 -> 16-bit dsPIC33 with DSP -> 32-bit PIC32), targeting high-speed control and signal-processing tasks. The -E suffix designates the -40C to +125C extended industrial temperature range, while /P denotes the plastic 18-pin PDIP package (0.300 inch body, 7.62 mm row spacing). Key features include one 16-bit timer, up to 13 general-purpose I/O pins with peripheral pin-select flexibility, two UART modules with IrDA support, one SPI port, one I2C port, and a 4-channel DMA controller that offloads data movement from the CPU. The nanoWatt power-management suite provides Idle, Sleep, and Doze modes plus a Real-Time Clock calendar that can run from a 32 kHz secondary oscillator, making the part suitable for battery-backed deterministic control. Architecturally, the device uses a 5-stage pipeline, a hardware 17-bit x 17-bit multiplier, and a 40-bit barrel shifter, giving single-cycle MAC and zero-overhead looping. An on-chip 7.3728 MHz internal FRC oscillator (user-trimmable) and PLL multiply it up to 40 MIPS, eliminating an external crystal in cost-sensitive designs. The /P variant is recommended for automotive in-cabin applications per the Microchip product page. Typical applications include industrial sensor conditioning, HVAC fan and pump controllers, automotive body modules, BLDC and stepper motor control loops, low-cost digital signal conditioning, and portable instrumentation. The 13 available I/Os plus DMA, ADC, and PWM make it ideal for single-chip closed-loop systems. When designing in this part, add a 0.1 uF decoupling capacitor on VDD within 5 mm of the pin, leave the AVDD/AVSS analog rails separately decoupled from noisy digital VDD, and consult the device migration tables if you anticipate moving to dsPIC33F for DSP acceleration. This page combines distributor pricing, drop-in alternatives, and engineering notes not collected on the manufacturer's product page.

견적 요청 문의하기
PIC24HJ12GP201-E/SO - 16-bit 40MIPS MCU 12KB Flash 18-SOIC
PIC24HJ12GP201-E/SO

PIC24HJ12GP201-E/SO - 16-bit 40MIPS MCU 12KB Flash 18-SOIC

The Microchip Technology PIC24HJ12GP201-E/SO is a high-performance 16-bit microcontroller from the PIC24H family, delivering 40 MIPS of CPU throughput and integrating 12 KB of Flash program memory plus 1 KB of SRAM in an 18-pin SOIC wide-body package. The -E suffix designates the extended industrial operating temperature grade (-40C to +125C), making this part suitable for harsh-environment and automotive under-hood applications. A 16-bit microcontroller (MCU) is a single-chip computer that uses a 16-bit-wide data path, registers, and ALU, sitting in the hierarchy between 8-bit MCUs and 32-bit MCUs (PIC24 -> dsPIC33 -> 32-bit Cortex-M class). It executes arithmetic, logic, and DSP-oriented instructions on 16-bit operands in a single cycle, while its 24-bit instruction word provides code compactness. PIC24H devices specifically use a modified Harvard architecture with a five-stage pipeline, a 16-bit working register file, and on-chip peripherals - a sweet spot for real-time control loops where 8-bit MCUs lack throughput and 32-bit MCUs cost more per MIPS. Key features include a 40 MHz maximum operating frequency, an integrated 10/12-bit ADC with multiple conversion channels, multiple 16-bit timers, a 16-bit digital signal processing (DSP) capability for math-intensive control, and Microchip's nanoWatt power-management modes. The 18-SOIC package provides 13 usable general-purpose I/O lines, two 16-bit timer/counter modules, and interfaces including I2C, SPI, and UART that simplify connection to sensors, motor drivers, and human-interface peripherals. From an architectural standpoint, the PIC24H employs a C-optimized instruction set, hardware multiply/divide, deterministic interrupt latency, and a peripheral engine that runs in parallel with the CPU. Compared to PIC24F parts, the PIC24H 'GP' family doubles CPU throughput to 40 MIPS at the same 3.3V supply - useful when the application runs a control loop faster than the ADC sample rate, or implements a software state machine that cannot tolerate jitter. Typical applications include closed-loop motor control (BLDC, stepper, DC), sensor-signal conditioning front-ends, LED lighting drivers, automotive body and HVAC modules, industrial sensor hubs, and digital power-supply control. The 12 KB Flash and 1 KB SRAM are well-matched to small deterministic control firmware running at 40 MIPS. When designing with this part, select a 3.3V LDO with adequate transient response for the 40 MIPS peak current, place decoupling capacitors within 5 mm of each VDD pin, and reserve a debug header footprint for the ICSP/PGECx-PGEDx programming interface to support in-circuit programming and runtime debugging. This page synthesizes distributor pricing, drop-in PIC24 family alternatives sourced from Microchip parametric data, and practical design notes not found in the standalone datasheet PDF.

견적 요청 문의하기
PIC24HJ12GP201-I/P - 16-bit 40MIPS 12KB Flash MCU | Microchip
PIC24HJ12GP201-I/P

PIC24HJ12GP201-I/P - 16-bit 40MIPS 12KB Flash MCU | Microchip

The Microchip Technology PIC24HJ12GP201-I/P is a 16-bit microcontroller from the PIC24H family running at 40 MIPS with 12 KB Flash program memory, housed in an 18-pin PDIP (DIP-18) through-hole package. It features a modified Harvard architecture with an enhanced instruction set, designed for high-speed repetitive computations and digital control applications. Background Knowledge: A microcontroller is a single-chip computer containing a CPU core, program memory (Flash), data memory (RAM), and integrated peripherals such as timers, ADCs, communication interfaces, and I/O. The PIC24H family sits within Microchip's 16-bit MCU portfolio, positioned between the 8-bit PIC18 and 32-bit PIC32 families. The "HJ" designation indicates a high-performance variant with a modified Harvard architecture, separate program and data buses, and a C-compiler-friendly instruction set. The 16-bit data path enables efficient DSP-style math operations, while the Flash memory supports in-system self-programming for field upgrades. Key features include 40 MIPS execution speed at an internal FRC of 7.37 MHz (40 MHz with PLL), 12 KB Flash (4K x 24 instruction words), 1 KB RAM, 21 digital I/O pins, a 10/12-bit ADC with up to 10 channels, multiple timers, and communication peripherals (UART, SPI, I2C). The part operates from 3.0 V to 3.6 V and supports industrial temperature grades. The 18-pin PDIP package is ideal for breadboarding, education, and prototype development. The device uses a 16-bit modified Harvard CPU with a 24-bit instruction word, separate program and data buses, and a hardware multiplier supporting 16x16-bit integer and fractional math in one cycle. A 4-deep instruction prefetch queue and branch prediction reduce pipeline stalls, allowing most instructions to execute in one cycle. The architecture is fully compatible with the dsPIC33F DSC family, enabling migration to DSP-capable silicon with the same peripheral set. Typical applications include motor control (BLDC, PMSM, stepper), industrial automation, power conversion (digital PFC, inverter control), sensor signal processing, and consumer appliances. The combination of deterministic interrupt response, math acceleration, and C-friendly architecture makes it well suited to closed-loop control applications. Design consideration: When migrating from PIC24HJ12GP201 to PIC24HJ12GP202, the pinout is compatible but the 202 variant offers more memory and peripherals. For new designs, verify the latest silicon revision (marked on the device) and ensure the selected debug header matches the device footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers a faster comparison for different vertical segments and migration paths.

견적 요청 문의하기
PIC24HJ12GP202-E/SO - 40 MIPS 16-bit MCU, 12KB Flash, 28-SOIC | Microchip
PIC24HJ12GP202-E/SO

PIC24HJ12GP202-E/SO - 40 MIPS 16-bit MCU, 12KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC24HJ12GP202-E/SO is a 16-bit PIC24H series microcontroller operating at up to 40 MIPS (40 MHz) with 12 KB Flash program memory (4K x 24) and 1 KB SRAM, housed in a 28-pin SOIC package rated -40C to +125C. The CPU core combines a modified Harvard architecture with a 16-bit data path and 24-bit instruction word, enabling deterministic 5-cycle interrupt latency suitable for digital control loops. On-chip peripherals include multiple PWM channels, a 12-bit A/D converter (ADC), Brown-out Detect/Reset (BOR), Power-on Reset (POR) and Watchdog Timer (WDT). The device operates from a single 3.0 V to 3.6 V supply and is AEC-Q100 qualified, making it suitable for automotive applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), working RAM, and peripheral subsystems (timers, ADC, communication controllers) on a single silicon die. The PIC24H family sits in the 16-bit MCU tier of Microchip's portfolio, between the 8-bit PIC16/PIC18 families and the 32-bit PIC32 families, and is pin-compatible with the dsPIC33F digital signal controller family. This positioning gives designers a deterministic C-friendly architecture without stepping up to the complexity of an ARM Cortex core. Key differentiating features include 40 MIPS core performance (3.25x faster than typical 8-bit PIC MCUs), AEC-Q100 qualification for automotive Grade 1 environments, nanoWatt sleep modes for battery-aware designs, and integrated peripherals that eliminate external glue logic. The C-compiler-friendly instruction set and MPLAB XC16 toolchain reduce firmware development friction. Architecturally, the PIC24H employs a 16-bit data bus, 24-bit instruction path with single-cycle MAC capability (the dsPIC33F cousin adds full DSP MAC). The 12-bit ADC provides up to 10 channels of analog input, while the motor-control PWM module supports complementary outputs with programmable dead time. Typical applications include automotive sensor interfaces, BLDC motor control, HVAC fan controllers, LED lighting drivers, industrial automation PLCs, and uninterruptible power supply (UPS) supervisory logic. The combination of small Flash footprint and deterministic 5-cycle latency is well-suited to closed-loop digital control. When designing with PIC24HJ12GP202-E/SO, ensure VDD decoupling uses a 0.1 uF ceramic capacitor placed within 5 mm of the supply pin, plus a bulk 10 uF tantalum or ceramic. Program the configuration bits to match oscillator mode (e.g., HS or XTAL with PLL), and budget Flash endurance (10K minimum erase/write cycles per block) when designing in-application firmware update flows. This page synthesizes verified distributor pricing, AEC-Q100 drop-in alternatives, automotive-grade cross references, and practical design notes not aggregated on the manufacturer datasheet.

견적 요청 문의하기
PIC24HJ12GP202-E/SP - 16-Bit 40MIPS MCU 12KB Flash | Microchip
PIC24HJ12GP202-E/SP

PIC24HJ12GP202-E/SP - 16-Bit 40MIPS MCU 12KB Flash | Microchip

The Microchip Technology PIC24HJ12GP202-E/SP is a 16-bit PIC24H microcontroller delivering 40 MIPS performance from a 3.0V to 3.6V supply, with 12 KB Flash and 1 KB RAM, packaged in a 28-pin SPDIP (SP) through-hole form factor. A PIC microcontroller is a compact, low-power embedded processor that integrates CPU core, non-volatile program memory, RAM, and a configurable set of peripherals (timers, ADC, communication interfaces, GPIO) into a single IC. The PIC24H family extends the 16-bit architecture with a modified Harvard core, hardware Multiply/Divide unit, and DSP-oriented instructions, sitting in the hierarchy: PIC24 -> 16-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. The 'HJ' prefix denotes the 40 MIPS high-performance tier, the 'GP' indicates a general-purpose variant with ADC and motor-control-friendly PWM, and '202' (vs '201') adds 2 KB of additional Flash on the same silicon. Key features include 21 general-purpose I/O, a 10/12-bit ADC with up to 10 channels, two comparators, two UART/SPI/I2C configurable serial interfaces, three 16-bit timers, and a 6-channel 16-bit PWM module suitable for motor-control, lighting, or power-conversion loops. The device is pin-compatible with the dsPIC33F DSP MCU family, allowing firmware migration when DSP extensions are later required. The architecture uses a 16-bit modified Harvard core with a hardware Multiply/Divide unit, separate program and data buses, and a 24-bit instruction word for compact code. The 'nanoWatt' power management integrates sleep, idle, and doze modes with dynamic clock switching and peripheral disable, allowing current draw to drop below tens of microamps in standby. Typical applications include industrial motor control (BLDC/PMSM/Stepper), digital power conversion (SMPS, PFC, LLC), automotive body/sensor nodes (AEC-Q100 graded), medical instrumentation, and general-purpose 16-bit embedded control with capacitive touch firmware libraries. The wide 3.0V-3.6V supply and 40 MIPS headroom support deterministic real-time loops. When designing with this MCU, place a 10 uF + 0.1 uF decoupling pair within 5 mm of VDD/VSS, route MCLR through a 10 kohm pull-up with the ICSP connector properly protected, and consult the family datasheet for PPS mapping to avoid pin-function conflicts. This page combines verified distributor pricing, curated drop-in alternatives, and practical design notes that supplement the Microchip datasheet 70282E without duplicating it.

견적 요청 문의하기