집적 회로

하위 카테고리

📁 ADC/DAC 2519 제품 📁 증폭기 IC 797 제품 📁 오디오 코덱 16 제품 📁 오디오 IC 2 제품 📁 클록 및 타이밍 299 제품 📁 DSP 963 제품 📁 데이터 수집 IC 2 제품 📁 디지털 포텐셔미터 4 제품 📁 디스플레이 드라이버 및 컨트롤러 1 제품 📁 FPGA & CPLD 6666 제품 📁 인터페이스 IC 1586 제품 📁 LED 드라이버 1 제품 📁 로직 IC 305 제품 📁 메모리 IC 875 제품 📁 마이크로컨트롤러 18728 제품 📁 마이크로프로세서 4 제품 📁 모터 드라이버 1 제품 📁 기타 1 제품 📁 Sensor and Detector Interfaces 1 제품 📁 특수 IC 15 제품 📁 비디오 IC 13 제품

제품 (32801)

PIC32MK0256MCJ064T-E/R4X - 80MHz, 256KB Flash MCU | Microchip
PIC32MK0256MCJ064T-E/R4X

PIC32MK0256MCJ064T-E/R4X - 80MHz, 256KB Flash MCU | Microchip

The Microchip Technology PIC32MK0256MCJ064T-E/R4X is a 32-bit MIPS32 microAptiv PIC32MK microcontroller with 256KB ECC-protected Flash and 64KB RAM, housed in a 64-pin VQFN (9x9 mm) package. It operates up to 80MHz (the family headroom is 120MHz on the I-grade variant) and integrates a rich motor-control peripheral set including high-resolution PWM, op-amps, and CAN-FD. A 32-bit microcontroller (MCU) is a single-chip computer built around a 32-bit data-path processor core, in-system programmable Flash, on-chip RAM, and a configurable peripheral set. Within the broader taxonomy, the PIC32MK sits at the hierarchy: microcontroller -> 32-bit MCU -> MIPS-based MCU -> motor-control MCU -> industrial MCU -> embedded computing -> semiconductor. The microAptiv core delivers 1.57 DMIPS/MHz and supports DSP extensions and a single-precision FPU, making it suitable for closed-loop motor control and IIoT edge nodes. Key features include 256KB Flash with ECC, 64KB SRAM, dedicated motor-control PWM with 7.5ns resolution, four on-chip op-amps (configurable as PGAs), CAN-FD, USB-FS, and multiple UART/SPI/I2C instances. The 64-VQFN package includes an exposed thermal pad giving a typical theta-JA around 24 C/W on a standard JEDEC 4-layer board, enabling reliable operation at industrial temperatures. Typical applications include BLDC/PMSM motor drives, field-oriented control (FOC) of pumps and fans, industrial PLCs, and CAN-FD-connected IIoT edge nodes. The integrated op-amps reduce external component count for current sensing. When designing with this part, ensure the PCB has a solid copper thermal pad with thermal vias beneath the exposed pad. The CAN-FD peripheral requires a CAN transceiver such as the MCP2562FD for off-board networking.

견적 요청 문의하기
PIC32MK0256MCJ064T-I/PT - 120MHz MCU, 256KB Flash, CAN-FD | Microchip
PIC32MK0256MCJ064T-I/PT

PIC32MK0256MCJ064T-I/PT - 120MHz MCU, 256KB Flash, CAN-FD | Microchip

The Microchip Technology PIC32MK0256MCJ064T-I/PT is a 32-bit MIPS32 microAptiv microcontroller running up to 120 MHz with 256 KB of Flash and 64 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It is part of the PIC32MK Motor Control / CAN-FD (MCJ) family and integrates dedicated motor-control PWM, four 64-bit accumulators, a single-cycle MAC, a hardware floating-point unit, and a CAN-FD controller for high-speed industrial networking. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program and data memory, and a rich peripheral set on a single die. Within the broader semiconductor taxonomy, an MCU sits inside the microcontroller > microcontroller family > integrated circuit hierarchy. The 32-bit class targets applications that need higher computational throughput, larger address spaces, and richer peripherals than 8-bit or 16-bit MCUs can deliver. The PIC32MK0256MCJ064T-I/PT specifically belongs to the PIC32MK sub-family designed for motor control, digital power, and industrial IoT. Key features of the PIC32MK0256MCJ064T-I/PT include a 120 MHz MIPS32 microAptiv core with DSP extensions, hardware single/double-precision FPU, four 64-bit accumulators for high-dynamic-range signal processing, up to 256 KB of ECC-protected Flash, 64 KB of SRAM, and dual CAN-FD controllers. The device integrates multiple high-speed analog blocks, motor-control PWMs with fault inputs, and quadrature encoder interfaces that simplify BLDC, PMSM, and AC-induction drive designs. Technically, the part uses a 5V-tolerant I/O structure with selectable internal pull-ups, pull-downs, and open-drain modes. An integrated cache and prefetch engine accelerate execution from Flash. The 120 MHz core, combined with hardware DSP and FPU, makes it well-suited for closed-loop field-oriented control (FOC) running at multi-kHz rates on a single MCU. Typical applications include industrial motor drives (BLDC/PMSM), digital power conversion, CAN-FD industrial nodes, PLCs, factory automation controllers, and IIoT edge devices. It also fits EV battery management subsystems that require CAN-FD communications and safety-grade firmware. When designing with the PIC32MK0256MCJ064T-I/PT, ensure the PCB layout keeps the high-current motor traces isolated from the analog ground and that decoupling capacitors follow Microchip's recommended placement near each VDD/VSS pair. Programming is supported by MPLAB X IDE and the MPLAB Harmony ecosystem, which shortens time-to-prototype for motor-control firmware stacks. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes that go beyond the manufacturer datasheet, giving engineers a single source for procurement and engineering decisions.

견적 요청 문의하기
PIC32MK0256MCJ064T-I/R4X - 120MHz MCU, 256KB Flash, 64-VQFN | Microchip
PIC32MK0256MCJ064T-I/R4X

PIC32MK0256MCJ064T-I/R4X - 120MHz MCU, 256KB Flash, 64-VQFN | Microchip

The Microchip Technology PIC32MK0256MCJ064T-I/R4X is a 32-bit microcontroller based on the MIPS32 microAptiv core running at 120 MHz, integrating 256 KB of Flash and 64 KB of SRAM in a 64-pin 9x9 mm VQFN package. The part targets motor control and CAN-FD industrial applications with a rich peripheral set including multiple PWMs, ADCs, and CAN-FD controllers. A 32-bit microcontroller (MCU) is an integrated circuit combining a 32-bit processor core, program memory (Flash), data memory (SRAM), and a configurable peripheral set on a single die. MCUs sit at the top of the embedded computing hierarchy and form the control plane of nearly every electronic product, from household appliances to industrial robots. The PIC32MK family specifically layers DSP extensions, hardware CAN-FD, and high-resolution motor-control PWMs on top of the microAptiv core for real-time control workloads. Differentiating features of the PIC32MK0256MCJ064T-I/R4X include its 120 MHz core with hardware multiply-accumulate (MAC) and single-precision floating-point unit (FPU), four 64-bit accumulators supporting fractional and saturating math, a 12-bit ADC with up to 28 channels and 4 dedicated Sample-and-At-Hold amplifiers for simultaneous motor-phase sampling, and integrated CAN-FD controllers compliant with ISO 11898-1. The 256 KB ECC-protected Flash with pre-fetch cache and 64 KB SRAM support deterministic execution of complex control loops. The 64-VQFN (9x9) package provides a low-thermal-resistance platform (theta_JA in the low 20s C/W) suitable for space-constrained motor-drive PCBs. Typical applications include field-oriented control (FOC) of PMSM and BLDC motors, multi-axis stepper and servo drives, industrial PLC modules with CAN-FD backbones, and IIoT edge nodes with on-board signal conditioning. Design considerations center on proper thermal relief for the exposed pad, decoupling close to the VDD/VSS pairs, and using the integrated op-amps to eliminate external current-sense circuitry for cost and BOM reduction.

견적 요청 문의하기
PIC32MK0512GPD064-E/MR - 120MHz 512KB Flash MCU | Microchip
PIC32MK0512GPD064-E/MR

PIC32MK0512GPD064-E/MR - 120MHz 512KB Flash MCU | Microchip

The Microchip PIC32MK0512GPD064-E/MR is a 32-bit MIPS32 microAptiv microcontroller running up to 120MHz (per Microchip product family; some distributor pages list 80MHz in core clock domain) with 512KB Flash and 128KB SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. The device integrates a rich analog and motor-control peripheral set targeting industrial, automotive, and Industrial IoT applications. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a programmable peripheral set around a common bus. The PIC32MK family sits inside the broader PIC32 portfolio and is built on the MIPS32 microAptiv core, which places it under the larger category hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. The MK sub-family specifically extends PIC32 with high-performance analog, motor-control PWMs, and CAN-FD connectivity for industrial control. Key features of the PIC32MK0512GPD064-E/MR include: 512KB Flash program memory, 128KB SRAM, a 12-bit ADC module with up to 42 analog inputs, multiple CAN-FD ports, six UART, six SPI, four I2C, and a USB Full-Speed interface. The device also integrates DSP extensions and a single-precision FPU, enabling signal-processing workloads directly on the MCU. The -E temperature grade extends operating range to -40C to +125C for harsh-environment designs. Architecturally, the PIC32MK leverages the microAptiv pipeline with hardware multiply/divide and DSP ASE for efficient fixed-point signal processing. The advanced PWM module supports complementary outputs with programmable dead-time, ideal for driving three-phase motor inverters and digital power converters. The integrated op-amps and comparators reduce external analog count for current-shunt and BEMF sensing. Typical applications include BLDC and PMSM motor control (field-oriented control), industrial servo drives, solar inverters, PLCs, IIoT edge nodes, and automotive body/comfort controllers. The combination of CAN-FD, USB, and high-resolution PWM makes the PIC32MK well-suited to connected industrial equipment. When designing with this part, verify the -E temperature grade covers your thermal envelope and budget sufficient Flash for a fail-safe bootloader alongside the application image.

견적 요청 문의하기
PIC32MK0512GPD064-E/PT - 80MHz 512KB Flash MCU | Microchip
PIC32MK0512GPD064-E/PT

PIC32MK0512GPD064-E/PT - 80MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MK0512GPD064-E/PT is a 32-bit MIPS32 microAptiv PIC microcontroller operating up to 80 MHz, integrating 512 KB of Flash program memory and 131 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It targets AEC-Q100 automotive, industrial control, and motor-drive applications, and is powered from a 2.2 V to 3.6 V supply with an extended -40C to +125C operating range. The MCU also includes 4 KB of EEPROM emulation, hardware FPU, and DSP extensions. A 32-bit microcontroller (MCU) is a system-on-chip that combines a high-performance processor core, program and data memory, and a rich set of digital and analog peripherals around a single silicon die. Within the broader taxonomy, an MCU sits inside the Embedded IC family, beneath Microcontrollers, beneath Integrated Circuits. The PIC32MK series specifically adds single-precision IEEE-754 floating-point and DSP MAC instructions to the MIPS32 microAptiv core, enabling high-throughput signal processing without an external DSP. The device is fabricated on a low-power CMOS process and supports USB Full-Speed device/host/OTG through an integrated USB 2.0 Full-Speed transceiver. Key features include six SPI, six UART, four I2C, six I2S, a 12-bit 3.75 MSPS ADC, dual 12-bit DACs, eight DMA channels, and six CAN-FD modules, providing a broad peripheral set for multi-protocol industrial nodes. The 32MK family supports motor-control PWMs with high-resolution edge placement and a Quadrature Encoder Interface (QEI), enabling single-chip FOC and trapezoidal motor drives. An integrated crypto engine, True Random Number Generator, and secure Flash boot region accelerate IEC 62443 and ISO 26262-style secure-boot designs. The architectural sweet spot is the combination of 80 MHz core speed with hardware MAC/FPU, giving 120 DMIPS performance and DSP throughput in the tens of MMACS range - sufficient for field-oriented control of 3-phase PMSM motors and high-rate multi-loop industrial feedback at low BOM cost. The 12-bit ADC can sample up to 28 channels at 3.75 MSPS aggregate, paired with dual analog comparators and CTMU touch support for human-machine-interface sensing. Typical applications include industrial motor control (BLDC, PMSM, AC induction, stepper), automotive body and chassis ECUs, industrial IoT gateways with USB and CAN connectivity, PLC and remote I/O, and digital power conversion controllers. The -E extended temperature grade and AEC-Q100 qualification make it well suited to under-hood automotive modules and factory-floor equipment. When designing with this device, allocate the 64-pin TQFP footprint with a continuous ground pour under the exposed pad region, and route the differential USB DP/DM pair with 90 ohm differential impedance to preserve USB-IF compliance. Decouple VDD/VUSB with 100 nF X7R close to each pin pair and a bulk 4.7 uF tantalum within 10 mm.

견적 요청 문의하기
PIC32MK0512GPD064-I/MR - 120MHz 512KB Flash 32-bit MCU | Microchip
PIC32MK0512GPD064-I/MR

PIC32MK0512GPD064-I/MR - 120MHz 512KB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MK0512GPD064-I/MR is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC running at 120 MHz, integrating 512 KB (512K x 8) of Flash program memory in a 64-pin QFN (9x9 mm) package. The device targets general-purpose embedded applications as well as motor-control and industrial control designs that need a rich mixed-signal peripheral set on a small surface-mount land pattern. Background. The PIC32MK series is Microchip's high-end 32-bit microcontroller family based on the MIPS32 microAptiv core architecture. PIC32MK devices combine DSP-class arithmetic, FPU, 120 MHz operation, motor-control PWMs, op amps, DACs and ADCs in a single chip. The architecture belongs to the broader PIC32 family which, in turn, sits inside Microchip's MCU product line alongside PIC24 and dsPIC. Within a system, the MCU is the central processing and control element that executes firmware, drives peripherals and interfaces to sensors and actuators. Key features of this part include 512 KB Flash, 128 KB SRAM, 4 KB EEPROM, operation from 2.2 V to 3.6 V, multiple UART/SPI/I2C interfaces, USB, motor-control PWMs, integrated op-amps and 12-bit ADCs. The 64-QFN package reduces board area versus 64-pin TQFP while providing an exposed pad for thermal dissipation. From a technical perspective, the MIPS32 microAptiv core delivers 1.56 DMIPS/MHz and supports DSP extensions. The integrated analog front-end (op-amps, comparators and 12-bit ADC) enables direct current-sensor interfacing without external analog ICs, while dedicated motor-control PWMs support field-oriented control of three-phase BLDC and PMSM motors. Typical applications include industrial motor drives (BLDC, PMSM, ACIM), factory automation controllers, PLC modules, Industrial Internet of Things (IIoT) edge nodes, multi-channel sensor hubs and general-purpose 32-bit embedded control. Industrial-grade temperature range (-40C to +85C) supports deployment in unenclosed factory environments. When designing with this part, plan a 4-layer PCB with a continuous thermal pad under the QFN exposed pad to dissipate the 120 MHz core dissipation; verify all analog inputs use the integrated op-amp buffers rather than direct ADC pinouts when source impedance is high. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512GPD064-I/PT - 120MHz 32-bit MCU, 512KB Flash, TQFP-64 | Microchip
PIC32MK0512GPD064-I/PT

PIC32MK0512GPD064-I/PT - 120MHz 32-bit MCU, 512KB Flash, TQFP-64 | Microchip

The Microchip Technology PIC32MK0512GPD064-I/PT is a 32-bit MIPS32 microAptiv MCU running up to 120 MHz, integrating 512 KB Flash and 64-pin TQFP (10x10 mm) packaging for industrial and motor-control applications. The device features a Floating Point Unit (FPU) and DSP extensions, four op amps, multiple 12-bit ADC modules, and CAN-FD interfaces, providing a rich analog and digital peripheral set targeting motor control, industrial control, and Industrial Internet of Things (IIoT) edge nodes. Operating voltage is 3.0V to 3.6V with an industrial temperature range of -40C to +85C. A 32-bit MCU (Microcontroller Unit) is an embedded processor that integrates CPU core, memory, and peripherals on a single die. Within the PIC32 family hierarchy, the PIC32MK sub-family sits between the PIC32MX (general purpose) and PIC32MZ (high-performance) lines, offering a balance of DSP, FPU, and motor-control peripherals at moderate clock speeds. The microAptiv core implements the MIPS32r2 ISA with DSP and optional FPU, enabling deterministic interrupt response and SIMD-style signal processing in real-time control loops. Key features of the PIC32MK0512GPD064-I/PT include 512 KB Flash, 64 KB SRAM (per family datasheet), four 12-bit ADC modules at up to 3.75 Msps, four operational amplifiers, and up to four CAN-FD ports. The 120 MHz core delivers 198 DMIPS and 397 CoreMark, while integrated DSP instructions accelerate field-oriented control (FOC) loops for three-phase motor drives. Hardware cryptographic accelerators and a true random number generator support secure IIoT deployments. The architecture combines deterministic MIPS32r2 execution with dedicated motor-control PWM, quadrature encoder interfaces, and high-speed analog front-end. The integrated op amps close the current-sense feedback loop without external amplifiers, reducing BOM cost. Multi-channel CAN-FD and high-speed USB simplify connectivity for industrial networking. Typical applications include field-oriented control (FOC) motor drives for BLDC and PMSM motors, PLC and industrial control modules, multi-axis CNC controllers, and IIoT edge gateways requiring CAN-FD networking. The combination of DSP performance and analog integration is particularly compelling for sensorless motor control. When designing with this MCU, allocate PCB area for the 10x10 mm TQFP footprint and route the analog/digital grounds as a star pattern. Decouple VDD with 100 nF ceramic per pin and a bulk 10 uF tantalum, and follow Microchip AN2584 PCB layout guidelines for mixed-signal designs to preserve ADC accuracy. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes not found on the Microchip datasheet alone, providing engineers with a one-stop reference for sourcing and designing with the PIC32MK0512GPD064-I/PT.

견적 요청 문의하기
PIC32MK0512GPD064T-E/PT - 32-bit 80MHz MCU, 512KB Flash, 64-TQFP | Microchip
PIC32MK0512GPD064T-E/PT

PIC32MK0512GPD064T-E/PT - 32-bit 80MHz MCU, 512KB Flash, 64-TQFP | Microchip

The Microchip Technology PIC32MK0512GPD064T-E/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running up to 80 MHz with 512 KB of Flash and a rich peripheral set, packaged in a 64-pin TQFP (10x10 mm). The "T-E/PT" suffix indicates tape-and-reel packaging and the extended temperature grade (-40C to +125C). Microcontrollers (MCUs) are programmable integrated circuits that combine a CPU core, memory, and peripherals to govern the behavior of an embedded system. The PIC32MK family specifically targets motor control, industrial automation, and Industrial IoT applications, combining a 120 MHz-capable MIPS32 microAptiv core (the E/PT variant operates at 80 MHz under industrial temperature conditions), an integrated floating-point unit (FPU) for single/double-precision math, four 64-bit accumulators, a single-cycle MAC engine with saturating and fractional support, and MicroMIPS mode that delivers up to 40% smaller code. The PIC32MK family is the natural hierarchy entry: MCU -> 32-bit MCU -> PIC32 -> PIC32MK -> microAptiv core. Key features of the PIC32MK0512GPD064 family include a 12-bit ADC with up to 3.5 Msps, high-resolution PWM outputs for motor control, CAN-FD interfaces, USB, Ethernet MAC, and capacitive touch hardware. The 512 KB dual-bank Flash with live update support makes the device attractive for safety-critical and field-upgradable designs. Multiple communication peripherals (UART, SPI, I2C) plus high-performance analog make this device a versatile system-on-chip for industrial-grade end products. Architecturally, the PIC32MK uses a Harvard-style microAptiv core with separate instruction and data buses, plus tightly coupled DSP extensions. The 80 MHz/120 MHz pipeline delivers deterministic interrupt latency and 1.55 DMIPS/MHz, with 3.27 CoreMark/MHz efficiency at typical industrial voltage rails. Internal oscillators, PLLs, and dual-bank Flash allow zero-downtime firmware updates via the live update mechanism, which is essential for industrial field equipment that cannot be taken offline for service. Typical applications include motor-control inverters, industrial sensors and PLCs, building automation, Industrial IoT edge nodes, and digital signal processing front ends. The "E" extended temperature grade (-40C to +125C) and the integrated op-amps/ADC make the part well suited to three-phase motor-drive boards and HVAC controllers where thermal headroom and analog precision are mandatory. When designing with the PIC32MK0512GPD064T-E/PT, budget decoupling on AVDD/AVSS rails carefully and follow the 4-layer PCB reference layout from the datasheet to keep ADC SNR above 70 dB. Avoid routing high-current switching nodes adjacent to the analog input traces; the high-speed PWM can couple switching noise into the ADC. Also confirm the toolchain: MPLAB X IDE, XC32 compiler, and MPLAB Harmony 3 are the official development environments. This page synthesizes distributor pricing, drop-in alternatives across the PIC32MK family, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MK0512GPD064T-I/MR - 32-bit 120MHz 512KB MCU | Microchip
PIC32MK0512GPD064T-I/MR

PIC32MK0512GPD064T-I/MR - 32-bit 120MHz 512KB MCU | Microchip

The Microchip Technology PIC32MK0512GPD064T-I/MR is a 32-bit MIPS32 microAptiv PIC32MK MCU running at 120 MHz with 512 KB of Flash and 64 KB of SRAM, packaged in a 64-pin 9x9 mm QFN with exposed pad. It integrates a rich motor-control and DSP-capable peripheral set targeting industrial, motor-control and Industrial IoT applications. What is a PIC32MK microcontroller? The PIC32MK family is Microchip's high-performance line of 32-bit microcontrollers based on the MIPS32 microAptiv core, combined with DSP extensions and a single-precision FPU. Within the broader taxonomy, a PIC32MK belongs to the 32-bit MCU class -> microcontroller -> embedded processor -> semiconductor. It sits between the lower-end PIC32MX and the higher-end SAME70 SAM Cortex-M7 families in Microchip's portfolio, and is engineered for deterministic real-time control and DSP workloads. Key differentiating features include a 120 MHz core with single-cycle MAC, 4 op-amp analog comparators, 5 dedicated 12-bit ADC pairs, dedicated PWM with 9 outputs for motor drive, 6 I2S channels, 4 I2C ports, USB Full-Speed, and CAN-FD support. The 512 KB Flash supports large motor-control algorithm libraries, while the 64-pin QFN-EP package provides compactness with strong thermal dissipation via the exposed pad. Architecturally, the device separates fast ADC sampling and PWM generation on its own bus from the application code, enabling sub-microsecond control loop latency. A dedicated Peripheral Trigger Generator allows ADC, PWM and DMA to be synchronized without CPU intervention, making it ideal for field-oriented control of PMSM/BLDC motors and digital power conversion. Typical applications include BLDC and PMSM motor drives, industrial servo control, solar inverters, digital power supplies, and Industrial IoT edge nodes. The wide 5V-tolerant I/O with 22 mA source/sink also supports direct interface to gate drivers and industrial transceivers. When designing with this part, prioritize decoupling the AVDD/AVSS pins with 100 nF + 1 uF ceramics placed within 5 mm of each pin, and bond the exposed pad to a continuous ground plane with at least 16 thermal vias for motor-drive dissipation. Programming is supported by MPLAB X IDE with MPLAB Harmony 3 motor-control framework. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MK family, and practical PCB design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MK0512GPD064T-I/PT - 120MHz 512KB Flash MCU | Microchip
PIC32MK0512GPD064T-I/PT

PIC32MK0512GPD064T-I/PT - 120MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MK0512GPD064T-I/PT is a 32-bit MIPS32 microAptiv PIC microcontroller delivering 120 MHz CPU performance with 512 KB of Flash and 64 KB of SRAM in a 64-pin TQFP (10x10 mm) package. The device integrates a single-precision Floating Point Unit (FPU), four 64-bit accumulators, single-cycle MAC with saturating and fractional math support, and MicroMIPS mode for up to 40 percent code-size reduction. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADCs, timers, communication controllers, I/O) on one piece of silicon. Within the broader hierarchy of embedded semiconductors, MCUs sit below microprocessors and above simple digital logic. PIC32MK microcontrollers sit at the high-performance end of the 32-bit MCU class, targeting motor control, industrial automation, and Industrial IoT edge nodes that require deterministic DSP-like math at the edge. Key features of the PIC32MK0512GPD064T-I/PT include up to 4 KB of EEPROM emulation, multiple high-speed analog peripherals (12-bit ADCs, DACs, op amps, comparators), four SENT and four CAN-FD capable CAN modules, USB-FS device/host/OTG, multiple UART/SPI/I2C interfaces, and a 5V-tolerant I/O set with selectable open-drain, pull-ups and pull-downs. The industrial temperature range of -40C to +85C and the wide 2.2V to 3.6V supply envelope enable use in factory-floor equipment. The part uses 120 MHz core clock with on-chip PLL and FRC oscillator for accurate timing. Architecture-wise, the PIC32MK family pairs a Harvard-style bus architecture with tightly-coupled DSP extensions, allowing deterministic real-time control loops at microsecond latency. The dual-bank Flash design supports live updates via dual-partition Flash partitioning, useful for over-the-air firmware upgrades without service interruption. Typical applications include industrial motor control (BLDC, PMSM, FOC drives), PLC analog front-ends, factory automation controllers, CAN-FD-based industrial sensor hubs, USB-based industrial diagnostics tools, and precision instrumentation. The combination of FPU, four 64-bit accumulators, and CAN-FD makes it especially suited to multi-axis motion controllers and high-speed industrial nodes. When designing with this part, allocate at least one CAN-FD peripheral to the fieldbus and reserve a USB-FS port for diagnostics; ensure the supply rail is decoupled with a 100 nF plus 4.7 uF combination close to VDD/VSS pairs. Engineers considering end-of-life risk should note Microchip's recommended alternative is the PIC32MK0512GPK064, which adds higher RAM and a different peripheral mix in the same family. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MK family, and practical design notes drawn from the manufacturer datasheet - a perspective not found in any single distributor listing.

견적 요청 문의하기
PIC32MK0512GPD100-E/PT - 32-Bit MCU 120MHz FPU DSP Motor Control | Microchip
PIC32MK0512GPD100-E/PT

PIC32MK0512GPD100-E/PT - 32-Bit MCU 120MHz FPU DSP Motor Control | Microchip

The Microchip Technology PIC32MK0512GPD100-E/PT is a 32-bit MIPS32 microAptiv PIC microcontroller running at 120 MHz with an integrated FPU and DSP engine, packaged in a 100-pin TQFP (12x12 mm). The -E/PT suffix designates the -40C to +125C extended-temperature automotive grade (AEC-Q100) supplied in tray packaging. The device combines 512 KB Flash, 128 KB SRAM, and 4 KB EEPROM on-chip memory with a rich peripheral set targeting motor control, industrial control, IIoT, and multi-channel CAN applications. A microcontroller (MCU) is a single-chip computer integrating a CPU core, RAM, non-volatile Flash storage, and a wide range of digital and analog peripherals on one IC. Within the broader semiconductor taxonomy, MCUs sit below microprocessors in compute hierarchy because they self-contain program storage; PIC32MK parts are further classified as 32-bit DSC-style MCUs (Digital Signal Controller) thanks to their integrated single-precision IEEE-754 FPU and DSP extensions. These attributes allow deterministic motor-control loops and high-speed signal processing without an external DSP. Key features of the PIC32MK0512GPD100 include four I2C ports, six I2S ports, USB Full-Speed, a 12-bit ADC, multiple PWM channels optimized for 3-phase motor drive, and CAN-FD controllers. The microAptiv core delivers 1.56 DMIPS/MHz with hardware multiply/divide and zero-wait-state Flash access up to 120 MHz, achieving 198 CoreMark. AEC-Q100 Grade 1 (-40C to +125C) qualification makes the -E/PT variant suitable for under-hood automotive and harsh industrial environments. The architecture pairs a Harvard-class bus with peripheral trigger generation, allowing ADC sampling to be tightly synchronized to PWM edges — critical for field-oriented control (FOC) of PMSM and BLDC motors. A high-speed analog comparator and operational amplifier front-end feed back-EMF signals directly to the ADC without external glue logic. Typical applications include automotive motor control (PMSM, BLDC, stepper), industrial servo drives, IIoT sensor hubs with CAN-FD networking, digital power conversion, and multi-axis robotics. The extended temperature range also suits outdoor industrial installations such as solar inverters and HVAC compressors. When designing with this part, ensure the 100-pin TQFP land pattern matches the 12x12 mm footprint and that the integrated op-amps are configured in the device header for the intended current-sensing topology. A separate 3.3 V LDO should supply AVDD for best ADC linearity. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet.

견적 요청 문의하기
PIC32MK0512GPD100T-E/PT - 120MHz 32-bit MCU | Microchip | TQFP-100
PIC32MK0512GPD100T-E/PT

PIC32MK0512GPD100T-E/PT - 120MHz 32-bit MCU | Microchip | TQFP-100

The Microchip Technology PIC32MK0512GPD100T-E/PT is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core, integrating 512KB of Flash, 128KB of SRAM, and 4KB of EEPROM in a 100-pin TQFP (12x12 mm) package. It combines up to 120 MHz core operation, a single-precision floating-point unit (FPU), and DSP extensions, targeting motor control, industrial control, and Industrial Internet of Things (IIoT) applications. The device is supplied in tape-and-reel (T) packaging with the extended -40C to +125C operating temperature range (E suffix). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data RAM, and peripheral interfaces such as ADCs, timers, communication controllers, and GPIOs into one package. Within the embedded system taxonomy, MCUs sit below microprocessors (MPUs) in integration level but above discrete logic in capability. The PIC32MK family specifically targets deterministic real-time control by combining DSP-class math throughput with motor-control peripherals, bridging the gap between 8-bit PIC MCUs and full application processors. Key features include an integrated FPU for IEEE-754 single-precision arithmetic, four pairs of DAC outputs for waveform generation, multiple 12-bit ADC modules with total throughput exceeding 25 MSPS, configurable logic cells (CLC) and configurable peripherals, four UART/SPI/I2C channels, multiple CAN-FD modules, and high-resolution PWM timers with dedicated motor-control edge alignment. The 512KB Flash supports self-programming under firmware control, while the crypto engine and unique device serial number enable secure-boot and IP-protection workflows. The device uses a 5-stage pipeline microAptiv core, dual-bank Flash with live update, and a peripheral trigger system that allows ADC conversions to be initiated by PWM edges without CPU intervention - critical for cycle-accurate torque control loops. Its 3.3V core with 5V-tolerant I/O simplifies industrial interfaces, while integrated op-amps and comparators eliminate external analog stages in current-sense paths. Typical applications include field-oriented control (FOC) of BLDC/PMSM motors, multi-axis industrial servo drives, CAN-FD networked sensor hubs, IIoT edge controllers, and industrial PLC expansion modules. The combination of dual CAN-FD controllers and high-resolution PWM makes it well suited to multi-node industrial communication topologies. When designing with this MCU, allocate DMA channels for ADC and DAC streams to keep the CPU free for control-loop math, and route each PWM pair to a complementary pair of pins to use the integrated dead-time generator. Verify that the 5V-tolerant I/O pins are not exposed to voltages above 5.5V during hot-plug events. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, organized for engineers sourcing 32MK-family MCUs for motor-control and IIoT designs.

견적 요청 문의하기
PIC32MK0512GPE064-E/PT - 32-bit MCU, 80MHz, 512KB Flash | Microchip
PIC32MK0512GPE064-E/PT

PIC32MK0512GPE064-E/PT - 32-bit MCU, 80MHz, 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPE064-E/PT is a high-performance 32-bit microcontroller from the PIC32MK family, integrating a MIPS32 microAptiv core running at 80 MHz with 512 KB of Flash and 128 KB of SRAM in a 64-pin TQFP (10x10 mm) package, qualified to the AEC-Q100 automotive grade. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash), working memory (SRAM), and a rich set of on-chip peripherals such as timers, ADCs, communication controllers, and DMA engines. MCUs sit at the heart of nearly every embedded system, executing firmware that reads sensors, drives actuators, and exchanges data with other ICs. The PIC32MK family is positioned in Microchip's mid-to-high performance 32-bit tier, above PIC24/dsPIC and below the high-end SAME70/SAM S7 lines - balancing DSP capability, peripheral count and deterministic motor-control timing for cost-optimised industrial designs. Within the family hierarchy: PIC32MK -> PIC32 -> 32-bit MCU -> Microcontroller -> Semiconductor. Key features of the PIC32MK0512GPE064 include its 32-bit MIPS32 microAptiv core with hardware multiply/divide and DSP extensions, 512 KB Flash, 128 KB SRAM, and a peripheral set tailored for motor control and industrial automation - including multiple 12-bit ADCs, high-resolution PWM, quadrature encoder interfaces, CAN-FD, and DMA. The -E/PT suffix denotes the extended-temperature (-40C to +125C) AEC-Q100 grade in tray packaging. The device is also offered in 64-pin QFN variants (PK/KD) for space-constrained designs. Architecturally, the PIC32MK uses a Harvard-style memory bus with separate instruction and data paths feeding the microAptiv core, plus a peripheral bus that connects the ADC, PWM, CAN, and DMA engines through crossbar-style routing. This dual-bus design keeps interrupt latency low for time-critical motor-control loops while permitting high-throughput peripheral transfers via DMA, eliminating CPU bottlenecks during multi-channel ADC sampling. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) field-oriented control (FOC), industrial servo drives, photovoltaic inverters, automotive body and chassis ECUs, and Industrial IoT gateways. The combination of FPU-less 80 MHz performance, 512 KB Flash for complex state machines and communication stacks, and on-chip CAN-FD makes the part well-suited to networked motor nodes in demanding precision use cases. When designing with this device, place 100 nF decoupling capacitors as close as possible to every VDD/VSS pair, allocate separate analog and digital ground planes tied at a single point near the MCU, and observe the 3.0V-3.6V supply window. Designers migrating from PIC32MX should note that the peripheral library (PLIB) and Harmony v3 configuration have replaced the legacy MLA stack, and pin remapping via PPS must be re-validated. This page synthesises distributor pricing, drop-in 64-TQFP alternatives, and AEC-Q100 considerations not found in a single manufacturer page, enabling faster part selection for AEC-Q100 motor-control, and Industrial IoT designs.

견적 요청 문의하기
PIC32MK0512GPE064-I/PT - 120MHz 32-Bit MCU, 512KB Flash | Microchip
PIC32MK0512GPE064-I/PT

PIC32MK0512GPE064-I/PT - 120MHz 32-Bit MCU, 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPE064-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core with an integrated Floating Point Unit (FPU) and DSP extensions, operating at up to 120 MHz with 512 KB of Flash and 256 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It belongs to the PIC32MK General Purpose (GP) sub-family, optimized for industrial control, motor drive, and Industrial Internet of Things (IIoT) applications. The -I/PT suffix denotes the industrial temperature grade (-40C to +85C) and TQFP-64 package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for program code, SRAM for runtime data, and often EEPROM for non-volatile storage), and programmable peripherals on one silicon die. The 32-bit MCU category sits above 8-bit and 16-bit MCUs in computational throughput, addressing range, and DSP capability. Within the power management and embedded hierarchy, MCUs are classified as integrated circuits > microcontrollers > 32-bit microcontrollers > MIPS-based MCUs. The PIC32MK family specifically targets motor control and industrial automation with features such as high-resolution PWM, fast ADC, and CAN/CAN-FD peripherals. Key features of the PIC32MK0512GPE064 include: 120 MHz core with single-cycle hardware multiply/divide and DSP instructions, 512 KB Flash program memory with 4 KB EEPROM emulation, 256 KB SRAM, multiple communication peripherals (CAN-FD, USB, SPI, I2C, UART), a 12-bit ADC with up to 42 analog inputs, and dedicated motor-control PWM modules. The device supports 2.2 V to 3.6 V single-supply operation and is available in RoHS-compliant packages. The PIC32MK family is offered in two main variants: GP (General Purpose) and MC (Motor Control). The GPE064 is the GP variant with the largest memory configuration in the 64-pin package, suitable for industrial control and IIoT gateway applications. The FPU and DSP extensions accelerate complex mathematical operations such as FFT, FIR filtering, and sensor fusion algorithms. Typical applications include industrial automation controllers, motor drive inverters, sensor signal processing, building automation gateways, IoT edge nodes, and medical instrumentation. The 120 MHz operation combined with DSP extensions enables real-time control loops while the CAN-FD peripheral supports modern automotive and industrial networking. When designing with this MCU, ensure that the application code is generated using a compatible toolchain such as MPLAB X IDE with the XC32 compiler. The 64-pin TQFP package provides ample I/O for most embedded applications while remaining compatible with hand-soldering and reflow processes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Engineers evaluating the PIC32MK0512GPE064-I/PT will find consolidated specifications, application examples, and a 15-question AEO/GEO-optimized FAQ to accelerate component selection.

견적 요청 문의하기
PIC32MK0512GPE064T-E/MR - 32-Bit MCU, 512KB Flash, 64-QFN | Microchip
PIC32MK0512GPE064T-E/MR

PIC32MK0512GPE064T-E/MR - 32-Bit MCU, 512KB Flash, 64-QFN | Microchip

The Microchip Technology PIC32MK0512GPE064T-E/MR is a 32-bit single-core microcontroller built on the MIPS32 microAptiv core, delivering up to 80 MHz (industrial-grade variant up to 120 MHz) in an AEC-Q100 qualified 64-pin QFN (9x9 mm) package. The device integrates 512 KB of Flash program memory, 128 KB of SRAM, and 4 KB of EEPROM, providing ample headroom for motor-control algorithms, communications stacks, and DSP-style signal processing. It supports an operating voltage range of 2.3 V to 3.6 V and is rated for the automotive temperature range (-40C to +125C), as indicated by the 'E' temperature grade in the part number. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (typically Flash), volatile working memory (SRAM), and a wide set of on-chip peripherals such as timers, communication controllers, ADCs/DACs, and interrupt controllers. Within the broader semiconductor taxonomy, MCUs belong to the integrated-circuit (IC) family, share heritage with microprocessors, and serve as the central computing element in embedded systems from consumer appliances to automotive ECUs. The PIC32MK family specifically targets high-performance motor control, industrial automation, and Industrial IoT applications where floating-point math and DSP throughput matter. Key features of this part include the MIPS32 microAptiv core with hardware multiply/divide, a single-precision hardware FPU, and DSP extensions, enabling efficient execution of control loops and digital filters. Communication peripherals include 4 I2C, 6 I2S, USB Full-Speed, CAN 2.0B, plus multiple UART/SPI channels. Twelve-bit ADCs with up to 3.5 Msps sampling, dedicated PWM channels for motor control, DMA, brown-out reset, watchdog timer, and a real-time clock are also integrated, reducing external component count. The 64-QFN package with exposed pad aids thermal dissipation at sustained 120 MHz operation. Architecturally, the device uses a Harvard-style memory organization with separate buses for instruction and data fetches, plus tightly-coupled peripherals that the DMA controller can service independently of the CPU, allowing deterministic, low-latency control loops. The AEC-Q100 qualification, automotive temperature grade, and rich motor-control peripheral mix make the PIC32MK0512GPE064T-E/MR suitable for harsh-environment, safety-conscious designs. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) field-oriented control (FOC), industrial PLC modules, solar inverter control loops, automotive body and chassis ECUs, and Industrial IoT sensor hubs requiring CAN or USB connectivity. When designing with this MCU, allocate PCB copper to the exposed pad for thermal relief, decouple each VDD/VSS pair with 100 nF ceramics, and consult the family reference manual for pin remapping options before committing the layout.

견적 요청 문의하기
PIC32MK0512GPE064T-E/PT - 512KB Flash 32-bit MCU, 80MHz | Microchip
PIC32MK0512GPE064T-E/PT

PIC32MK0512GPE064T-E/PT - 512KB Flash 32-bit MCU, 80MHz | Microchip

The Microchip PIC32MK0512GPE064T-E/PT is a high-performance 32-bit MIPS32 microAptiv microcontroller with 512 KB of Flash and a 64-pin TQFP (10x10 mm) package, qualified to AEC-Q100 for automotive applications. It operates up to 80 MHz with 3.3 V core and integrates DSP instructions, an FPU, and a rich peripheral set including 12-bit ADC, motor-control PWMs, op amps, and CAN-FD. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash + SRAM), and peripherals (ADCs, timers, communication interfaces) on one die. MCUs belong to the broader category of embedded processors and sit hierarchically under microcontrollers -> microprocessors -> semiconductor -> integrated circuit. The PIC32MK family targets real-time deterministic control workloads that demand DSP-class signal processing alongside traditional MCU I/O. Key differentiating features of this part include 512 KB Flash / 64 KB SRAM, a 120 MHz-capable core (run at 80 MHz in the E temperature grade), 8 KB instruction cache, 4 KB data cache, dedicated motor-control peripherals with up to 12 PWM channels, four op amps for current sensing, four 12-bit ADC modules with up to 2 MSPS, and a USB 2.0 Full-Speed OTG controller. The 64-pin TQFP package exposes 53 digital I/O pins. Architecturally, the device pairs a MIPS32 microAptiv core with single-cycle hardware multiply/divide, DSP/SIMD extensions, and an IEEE 754 single-precision floating-point unit. The peripheral set is partitioned into four ports (A-D) and supports up to four DMA channels, a 16-channel capture/compare/PWM engine, and two I2C/SPI/I2S ports plus two UART modules, making it well suited to multi-protocol industrial networking. Typical applications include field-oriented motor control (BLDC, PMSM, ACIM), industrial control loops, automotive body and chassis ECUs, functional-safety supplementary controllers, and Industrial Internet of Things edge nodes. The AEC-Q100 grade makes it drop-in for under-hood and cabin electronics where temperature and reliability stress the design envelope. When designing with this device, allocate the four op amps to current-shunt sensing to free the ADC channels for back-EMF and DC-bus sampling. Ensure the 3.3 V supply is decoupled with at least one 100 nF plus one 4.7 uF ceramic per VDD/VSS pair, and respect the 120 MHz maximum Fcy setting when migrating to the I-grade variant. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found on the manufacturer product page.

견적 요청 문의하기
PIC32MK0512GPE064T-I/MR - 120MHz 32-bit MCU | Microchip
PIC32MK0512GPE064T-I/MR

PIC32MK0512GPE064T-I/MR - 120MHz 32-bit MCU | Microchip

The Microchip PIC32MK0512GPE064T-I/MR is a high-performance 32-bit microcontroller built on the MIPS32 microAptiv core, operating at 120 MHz with 512 KB Flash and 128 KB SRAM in a 64-pin QFN (9x9 mm) package. The 'GPE' family designation denotes the General Purpose + Enhanced motor-control variant of the PIC32MK series, integrating a rich peripheral set including 12-bit ADC, multiple I2C/I2S, USB FS, and CAN-FD interfaces. A 32-bit MCU (microcontroller unit) is an integrated circuit containing a 32-bit processor core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die. Within the taxonomy, the PIC32MK sits under MCU -> microcontroller -> embedded processor -> semiconductor. The microAptiv core adds DSP extensions and a single-precision floating-point unit (FPU), enabling efficient execution of control loops and signal-processing tasks in motor-drive and industrial systems. Key features of this part include 120 MHz core speed, 512 KB self-programmable Flash with ECC, 128 KB SRAM, 4 KB EEPROM, 12-bit 3.5 MSPS ADC with up to 32 channels, six UART/SPI, four I2C, six I2S, USB 2.0 Full-Speed with PHY, two CAN 2.0B modules, motor-control PWMs, and quadrature encoder interfaces. The 64-QFN package offers a compact 9x9 mm footprint with an exposed pad for thermal dissipation, and operates over -40C to +85C industrial temperature range. Architecturally, the device pairs the microAptiv core with a high-bandwidth bus matrix, dual DMA engines, and dedicated motor-control peripherals including PWM, QEI, and op-amp interfaces, making it a single-chip solution for Field-Oriented Control (FOC) algorithms and industrial feedback loops. Compared with smaller PIC32MX parts, the PIC32MK family doubles peripheral integration and adds CAN-FD and DSP instructions. Typical applications include BLDC/PMSM motor drives, industrial servo control, PLC I/O modules, and Industrial IoT gateways with USB or CAN connectivity. When designing with this MCU, ensure the exposed pad is soldered to a sufficient copper pour (>=1 sq inch) and place decoupling capacitors within 3 mm of each power pin to meet the 3.5 MSPS ADC noise floor. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design guidance not found in the manufacturer datasheet, helping engineers quickly evaluate the PIC32MK0512GPE064T-I/MR for time-to-market motor-control and industrial designs.

견적 요청 문의하기
PIC32MK0512GPE064T-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip
PIC32MK0512GPE064T-I/PT

PIC32MK0512GPE064T-I/PT - 120MHz MCU 512KB Flash 64-TQFP | Microchip

The Microchip PIC32MK0512GPE064T-I/PT is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running up to 120 MHz, integrating 512 KB Flash, 256 KB SRAM, and 4 KB EEPROM in a 64-pin TQFP (10x10 mm) tape-and-reel package. It operates from 2.2 V to 3.6 V across the industrial -40 C to +85 C range. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile and non-volatile memory, and programmable peripherals on a single die. The PIC32MK family is a high-performance 32-bit line built on the MIPS microAptiv core with hardware FPU and DSP extensions, positioning it above traditional 8/16-bit MCUs and alongside Cortex-M4 class devices in the embedded 32-bit hierarchy: MCU -> 32-bit MCU -> Cortex-M/MIPS class -> PIC32MK sub-family. Key features include the MIPS32 microAptiv core with single-precision hardware FPU and DSP extensions, four analog comparators with 12-bit DAC references, configurable logic cells (CLC), and a motor-control PWM peripheral set. The device also integrates a USB 2.0 Full-Speed OTG controller, multiple CAN-FD modules, dedicated ADC channels with up to 12-bit resolution, and high-resolution PWM. The 64-TQFP package exposes up to 53 GPIO lines while preserving analog-rich pin functions. The architecture combines a deterministic interrupt controller with DMA-backed peripheral access, hardware math acceleration, and dual-bus matrix connectivity. ECC protection on Flash and parity on SRAM harden the device for industrial environments; the on-chip FPU supports 1.5 DMIPS/MHz, enabling closed-loop motor control and digital power conversion workloads. Typical applications include industrial motor control (BLDC/PMSM/ACIM), digital power conversion (PFC, LLC, phase-shifted full-bridge), industrial IoT edge nodes, automotive body and accessory ECUs, and multi-axis robotic drives. The CAN-FD and USB-OTG peripherals make it a strong fit for factory-floor communication bridges and field-bus nodes. When designing with this MCU, allocate decoupling capacitance per the datasheet's power-distribution diagram and follow the analog-ground star layout. The recommended alternative is PIC32MK0512GPK064 when a 1 MB Flash upgrade is required without footprint change. This page synthesizes distributor pricing, drop-in alternatives sourced from the Microchip PIC32MK family, and practical design notes not aggregated on any single manufacturer or distributor page.

견적 요청 문의하기
PIC32MK0512GPE100-I/PT - 120MHz MCU 512KB Flash | Microchip
PIC32MK0512GPE100-I/PT

PIC32MK0512GPE100-I/PT - 120MHz MCU 512KB Flash | Microchip

The Microchip Technology PIC32MK0512GPE100-I/PT is a 32-bit MIPS32 microAptiv PIC32MK microcontroller running at 120 MHz with 512 KB of Flash, 128 KB of SRAM and 4 KB of EEPROM, housed in a 100-pin TQFP (PT) package measuring 12x12 mm. This industrial-temperature variant (-40C to +85C) targets motor control, industrial control and Industrial IoT (IIoT) applications where deterministic real-time performance and rich analog peripherals are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a configurable set of peripherals on one die. Within the broader taxonomy the PIC32MK0512GPE100 sits in the hierarchy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS32 microAptiv core -> PIC32MK family -> semiconductor. It belongs to the same family as the recommended alternative PIC32MK0512GPK100 and combines Cortex-class compute density with DSP extensions and a single-precision FPU. Key features include a 120 MHz MIPS32 microAptiv core with DSP and FPU, 512 KB ECC-capable Flash, 128 KB SRAM, 4 KB EEPROM emulation, USB 2.0 Full-Speed with on-chip PHY, four I2C and six I2S interfaces, dual CAN 2.0B controllers, 12-bit ADC modules with up to 42 analog input channels, multiple motor-control PWMs, and QEI/SQI expansion. Operating voltage spans 2.3V to 3.6V from a single 3.3V rail. The 100-pin TQFP package provides generous I/O for multi-channel motor and industrial sensor interfaces. Architecturally the PIC32MK0512GPE100 combines a 5-stage pipelined MIPS core with Microchip's peripheral-rich bus matrix, dedicated motor-control PWM timers, and high-resolution 12-bit ADCs capable of concurrent sampling - critical for field-oriented control (FOC) loops. The integrated DSP unit accelerates trigonometric and matrix operations common in motor control, while the FPU offloads IEEE-754 single-precision math for sensor-fusion and IIoT edge analytics. Typical applications include BLDC and PMSM motor drives, industrial PLCs, IIoT edge nodes, multi-channel CAN-based automation backbones, USB-connected sensor hubs, and high-performance audio/voice front ends. The PIC32MK silicon targeting 12-bit ADC with dual CAN makes it especially well-suited to factory automation cells and servo drives. When designing with this device, allocate the largest Vcap/Vddcore decoupling capacitor as close to the VCAP pin as the layout allows, and respect the 2.3V-3.6V supply range. For motor-control PCB layout keep the ADC analog ground island separate from the digital ground and join them at a single point near the MCU. This page synthesizes distributor pricing tiers, drop-in alternatives from the same PIC32MK family, and practical design notes not aggregated on the manufacturer datasheet or on any single distributor listing.

견적 요청 문의하기
PIC32MK0512GPE100T-E/PT - 120MHz FPU MCU 100-TQFP | Microchip
PIC32MK0512GPE100T-E/PT

PIC32MK0512GPE100T-E/PT - 120MHz FPU MCU 100-TQFP | Microchip

The Microchip Technology PIC32MK0512GPE100T-E/PT is a 32-bit MIPS32 microAptiv microcontroller with FPU and DSP extensions, integrating 512 KB of Flash and 100-TQFP (12x12 mm) package in an automotive-grade (AEC-Q100) variant. It combines 32-bit 80 MHz (industrial grade up to 120 MHz) performance with a rich peripheral set targeting motor control, industrial control and Industrial Internet of Things (IIoT) applications, plus multi-channel CAN FD interfaces. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, memory (Flash, SRAM), and peripherals (timers, ADC, communication interfaces) on a single silicon die. The PIC32MK belongs to the MIPS32 microAptiv family - a Harvard-architecture core family widely used in signal-processing and motor-control applications. Within the broader taxonomy, this part is a microcontroller -> embedded processor -> semiconductor IC, with the FPU/DSP extensions placing it in the high-performance motor-control MCU segment. Key features include a 32-bit MIPS32 microAptiv core with single-precision FPU and DSP instructions, 512 KB Flash program memory, 64 KB SRAM, four pairs of differential ADC modules capable of high-speed motor-control sampling, multiple CAN FD controllers, motor-control PWMs with high-resolution capability, and a full Peripheral Pin Select (PPS) system for flexible signal routing. Technically, the PIC32MK uses a 4-wire MIPS standard trace/debug interface and supports DSP/SIMD instructions via the microAptiv core, achieving deterministic motor-control loop times while running signal-processing algorithms. The device integrates dedicated motor-control peripherals (PWM, QEI, BiSS, and analog comparators) tightly coupled to the CPU bus, reducing latency for field-oriented control (FOC) loops. Typical applications include BLDC/PMSM motor control, industrial PLCs, multi-axis servo drives, CAN-FD networked sensor nodes, and IIoT edge controllers. The wide AEC-Q100 automotive temperature range (-40C to +125C) also suits under-hood automotive ECUs. When designing with this part, plan the Peripheral Pin Select (PPS) mapping early to avoid pin conflicts, and allocate the four SAR ADC pairs carefully for current-sensing accuracy. The QFP package's exposed thermal pad is recommended for high-duty-cycle motor drive firmware. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet - giving engineers a faster path from datasheet to prototype.

견적 요청 문의하기
PIC32MK0512GPG048-E/7MX - 120MHz MCU 512K Flash 48-VQFN | Microchip
PIC32MK0512GPG048-E/7MX

PIC32MK0512GPG048-E/7MX - 120MHz MCU 512K Flash 48-VQFN | Microchip

The Microchip PIC32MK0512GPG048-E/7MX is a 32-bit MIPS32 microAptiv PIC microcontroller combining 120MHz CPU performance, 512KB of ECC-protected Flash, and 64KB SRAM in a 48-pin VQFN (7MX) package. This general-purpose + motor-control variant targets high-performance embedded applications that demand DSP capability, FPU hardware, and CAN-FD connectivity in a compact 6x6 mm footprint. The -E suffix indicates the extended industrial temperature grade (-40C to +125C). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into one package. Within the broader taxonomy, the PIC32MK0512 sits in the PIC32MK family of 32-bit microcontrollers, which itself belongs to the Microchip PIC32 family, and ultimately to the wider class of RISC microcontrollers / embedded controllers used in motor control, industrial automation, and IIoT. This is a sub-family of PIC microcontrollers, which are 8-/16-/32-bit MCUs based on Microchip's proprietary MIPS-derived architecture. Key features include hardware Floating Point Unit (FPU), DSP extensions on the microAptiv core, 4 DMA channels for low-overhead data movement, multiple 16-bit PWM outputs suitable for 3-phase motor control, 12-bit ADC at up to 3.5 MSPS, and a CAN-FD peripheral. The ECC-protected Flash improves reliability in electrically noisy environments by detecting and correcting single-bit memory errors. The 48-VQFN package enables compact PCB designs while still exposing a generous pin count for analog, communication, and timer resources. Typical applications include BLDC/PMSM motor control (FOC), industrial control PLCs, multi-channel sensor data acquisition, IIoT edge nodes with CAN-FD backbone, and digital power conversion. The integrated DSP/FPU and motor-control PWM peripherals make this MCU especially well-suited for field-oriented control algorithms running at high PWM frequencies. When designing with this device, pay close attention to the ICSP programming pins (PGECx/PGEDx pairs are not interchangeable), allocate sufficient decoupling on AVDD/VDD rails, and review the datasheet for the specific peripheral pinout (this -7MX suffix is the 48-VQFN pinout). The CAN-FD peripheral must be configured for the correct bit-timing to operate reliably on your chosen bus speed. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

견적 요청 문의하기
PIC32MK0512GPG048-E/Y8X - 32-bit MCU, 120MHz, 512KB Flash | Microchip
PIC32MK0512GPG048-E/Y8X

PIC32MK0512GPG048-E/Y8X - 32-bit MCU, 120MHz, 512KB Flash | Microchip

The Microchip PIC32MK0512GPG048-E/Y8X is a 32-bit MIPS32 microAptiv microcontroller operating at up to 120 MHz with 512 KB of ECC-protected Flash and 64 KB SRAM, housed in a 48-pin TQFP (Y8X) package. It integrates a single-precision FPU, CAN FD, op-amps, and a rich peripheral mix aimed at general-purpose and motor-control applications. Operating voltage is 2.3V to 3.6V across an automotive-grade -40C to +125C temperature range. What is a 32-bit microcontroller? A 32-bit MCU is a single-chip computer that fetches and executes 32-bit-wide instructions, exposing significantly higher throughput, larger linear address space, and richer peripherals than 8-bit or 16-bit counterparts. Within Microchip's taxonomy, the PIC32MK family sits between the PIC32MX (general purpose) and PIC32MZ (high performance) families, optimized for industrial control, motor drive, and IIoT. The microAptiv core adds DSP ASE instructions and a hardware FPU, lifting it above classic MIPS MCUs. Key features of the PIC32MK0512GPG048-E/Y8X include up to 120 MHz CPU clock (DC to 120 MHz at -40C to +85C, derated to 80 MHz at +125C), 512 KB Flash with ECC, 64 KB SRAM, 37 user I/O, four op-amp peripherals, multiple CAN FD ports, and PPS (Peripheral Pin Select) for flexible pin mapping. The integrated op-amps reduce BOM in motor-control current-sense paths. Architecturally, the device combines the microAptiv core with a high-speed peripheral bus, dual 12-bit ADCs (up to 28 Msps combined), 16-bit PWM timers with duty-cycle resolution suitable for field-oriented control (FOC), and dedicated quadrature encoder interfaces. ECC on Flash and RAM improves reliability in long-life industrial deployments. Typical applications include industrial motor control (BLDC, PMSM, stepper), factory automation, Industrial Internet of Things (IIoT) edge nodes, digital power conversion, automotive body and chassis subsystems, and CAN FD networked sensors. The op-amps and PWMs especially suit three-phase FOC motor drives. When designing with this part, place 0.1 uF and 1 uF decoupling caps adjacent to every VDD/VSS pin pair, and route the analog AVSS/AVDD pair with a star-ground topology. Use the on-chip op-amps for current sensing to reduce component count; configure the FPU and DSP ASE instructions via the compiler's -mhard-float and -mdsp flags. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MK family, and practical design notes not found in the manufacturer datasheet, delivering cross-brand context for engineers evaluating the PIC32MK0512GPG048-E/Y8X.

견적 요청 문의하기
PIC32MK0512GPG048-I/7MX - 32-bit MCU, 120MHz, 512KB Flash, 48-VQFN | Microchip
PIC32MK0512GPG048-I/7MX

PIC32MK0512GPG048-I/7MX - 32-bit MCU, 120MHz, 512KB Flash, 48-VQFN | Microchip

The Microchip Technology PIC32MK0512GPG048-I/7MX is a 32-bit MIPS32 microAptiv PIC32MK microcontroller operating at 120 MHz, integrating 512 KB of ECC-protected Flash and 64 KB of SRAM, housed in a 48-pin VQFN (6x6 mm) package. Headline parameters are 120 MHz CPU core speed, 512 KB Flash with ECC, 64 KB SRAM, and integrated CAN FD, FPU, and DSP extensions for high-performance real-time control. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and a rich peripheral set on one die. The PIC32MK family is positioned in Microchip's PIC32 lineup as a high-performance general-purpose and motor-control platform, sitting architecturally above the PIC32MX and PIC32MM lines. Within the PIC32MK taxonomy, the GPG family adds CAN FD and ECC, and the 0512GPG048 sub-variant specifically targets 512 KB Flash / 64 KB RAM / 48-pin compact designs. Compared with an 8-bit MCU such as PIC16, a 32-bit MIPS core offers 4-byte instruction throughput, hardware FPU single-precision floating-point, and DSP-oriented MAC units. Key features include a hardware Floating Point Unit (FPU) for IEEE-754 single-precision math, DSP extensions for signal processing, 5V-tolerant I/O with up to 22 mA source/sink, selectable internal pull-ups, pull-downs, and open-drain modes, five programmable edge/level-triggered interrupt pins, and external interrupts on all GPIO. The 48-VQFN package supports surface-mount manufacturing with a small 6x6 mm footprint and an exposed pad for thermal dissipation. The PIC32MK0512GPG048-I/7MX combines a MIPS32 microAptiv core with deterministic interrupt response, hardware FPU, and DSP MACs. The ECC-protected Flash improves reliability in industrial environments by detecting and correcting single-bit errors in program memory, reducing the risk of firmware corruption in long-lifecycle deployments. The integrated CAN FD peripheral enables higher-bandwidth automotive and industrial networking than classic CAN 2.0B. Typical applications include industrial motor control (BLDC/PMSM/servo drives), industrial automation and PLC I/O modules, Industrial Internet of Things (IIoT) edge nodes, multi-channel ADC-based sensor conditioning, and automotive body/comfort modules requiring CAN FD. The combination of FPU and DSP MACs accelerates field-oriented control (FOC) loops commonly used in motor drives. When designing with this part, ensure the exposed thermal pad is properly soldered to a sufficient copper pour for heat dissipation. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed as close as possible to the IC pins. For CAN FD networks, terminate the bus with 120 ohm resistors at each end and verify the CAN transceiver slew rate is configured for the chosen bitrate. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an independent reference for engineers evaluating the PIC32MK0512GPG048-I/7MX for motor control and industrial IIoT designs.

견적 요청 문의하기
PIC32MK0512GPG048-I/Y8X - 120MHz MCU 512KB Flash 48-TQFP | Microchip
PIC32MK0512GPG048-I/Y8X

PIC32MK0512GPG048-I/Y8X - 120MHz MCU 512KB Flash 48-TQFP | Microchip

The Microchip PIC32MK0512GPG048-I/Y8X is a 32-bit MIPS32 microAptiv PIC32MK microcontroller IC running at 120 MHz, with 512 KB of ECC-protected Flash and 64 KB of SRAM in a 48-pin TQFP (7x7 mm) package. The /Y8X suffix denotes a tray packaging option, while the -I suffix indicates an industrial operating temperature range. This part belongs to the PIC32MK General Purpose (GPG) family with CAN FD, FPU, and DSP extensions. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), RAM, and a rich set of peripherals such as timers, ADC, communication interfaces, and GPIO into one IC. MCUs sit in the broader hierarchy of embedded semiconductors: microcontroller -> embedded processor -> semiconductor. Within Microchip's portfolio, PIC32MK devices sit above PIC24 (16-bit) and PIC16 (8-bit) families, and the GPG sub-family targets industrial control and IIoT with CAN FD connectivity. Key features of the PIC32MK0512GPG048 include a 120 MHz MIPS32 microAptiv core with single-precision FPU and DSP instructions, 512 KB Flash with ECC, 64 KB SRAM, integrated CAN FD controller, multiple UART/SPI/I2C interfaces, and 12-bit ADC. The 48-TQFP package enables easy hand-soldering and rework in prototypes while keeping a compact 7x7 mm footprint for volume designs. The PIC32MK family uses a Harvard architecture with separate Flash and SRAM buses, accelerating deterministic real-time performance. ECC on Flash improves reliability in industrial environments where single-event upsets can corrupt code, and the integrated FPU accelerates floating-point math for sensor fusion and motor-control algorithms. Typical applications include industrial motor control (BLDC, PMSM, FOC), industrial control and PLC modules, IIoT gateways with CAN FD, multi-channel sensor aggregation, and factory automation. The CAN FD peripheral is particularly suited to industrial networks requiring higher bandwidth than classic CAN 2.0B. When designing with this device, ensure your toolchain uses MPLAB XC32 and a compatible Harmony v3 framework. Decoupling capacitors (100 nF + bulk) must be placed close to all VDD pins. Leave unused pins floating or configured as outputs per the datasheet to minimize power consumption. This page synthesizes distributor pricing across 11 distributors, drop-in alternatives from the same PIC32MK family, and practical design notes not consolidated in the Microchip datasheet DS60001570D, providing engineering decision support beyond the manufacturer's documentation.

견적 요청 문의하기