집적 회로

PIC32MZ1024EFG100-E/PF

PIC32MZ1024EFG100-E/PF - 32-Bit MCU 1MB Flash 252MHz TQFP-100 | Microchip

The Microchip Technology PIC32MZ1024EFG100-E/PF is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, offering 1 MB of Flash, 512 KB of SRAM, and a maximum core speed of 252 MHz (200 MHz / 330 DMIPS), housed in a 100-pin TQFP (12x12 mm) package. It integrates an IEEE 754-compliant single-precision FPU, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, and a DSP-enhanced core for high-throughput signal processing. The -E suffix indicates an extended operating temperature range of -40C to +125C, while /PF denotes the TQFP-100 package without lead-free finish designation that the -I/PT commercial variant carries. What is a PIC32 microcontroller? PIC32 is Microchip's family of 32-bit MIPS-based microcontrollers, positioned between 16-bit PIC24/dsPIC parts and higher-end ARM Cortex-M devices. The PIC32MZ EF sub-family specifically targets connectivity-rich applications requiring on-chip Ethernet, USB, CAN, and high-performance analog, making it part of the broader MCU > 32-bit MCU > connected MCU taxonomy. The 'EF' designation signals the FPU-equipped, connectivity-rich tier; 'G' indicates the specific pinout/memory sub-line within the 100-pin variant. Key differentiating features include 1 MB dual-panel Flash supporting live firmware updates without downtime, hardware crypto acceleration on select derivatives (this part is the non-Crypto variant), 12-bit 200 Msps ADC, and a High-Speed USB 2.0 PHY with integrated transceiver. The device provides up to 78 GPIO, multiple I2C/SPI/UART interfaces, SQI (Serial Quad Interface) for external flash, and a 10/100 Ethernet MAC with MII/RMII interfaces - connectivity that is rare at this price/performance tier. Architecturally, the PIC32MZ EF uses the MIPS Warrior M-class core running from a 12 MHz internal FRC or external crystal, with PLL providing the 200-252 MHz system clock. The dual-panel Flash architecture allows the active panel to run code while the inactive panel receives an OTA image, a critical feature for industrial and IoT devices that cannot tolerate firmware-update downtime. Peripherals are connected via a multi-layer AHB/APB matrix with 9 DMA channels for offloading CPU-intensive data moves. Typical applications include industrial IoT gateways requiring Ethernet and TLS, automotive infotainment/HMI subsystems, USB host/device peripherals, motor control FOC drives, and graphics HMI with external display controllers. The extended temperature grade (-E) suits industrial and automotive under-hood environments where commercial-grade parts are unreliable. The FPU accelerates control-loop math in motor drives and audio DSP, while the high-speed ADC captures current and voltage feedback without external analog front ends. When designing with this MCU, prioritize the dual-panel Flash feature in your bootloader to enable fail-safe OTA updates, and use the integrated Ethernet MAC with an external PHY (such as Microchip's KSZ8081) for deterministic industrial networking. Decoupling requires 100 nF + 10 uF near each VDDIOSC/VDD pair, and the 12 MHz crystal load capacitance must match the crystal's specification to maintain USB-IF compliance. This page synthesizes distributor pricing, drop-in PIC32MZ EF alternatives (same-family variants), and PCB/thermal design notes that complement the official Microchip datasheet DS60001320H.

USD $10.18 재고 있음

PIC32MZ1024EFG100-I/GJX

PIC32MZ1024EFG100-I/GJX - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-I/GJX is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz, integrating 1 MB Flash and 512 KB SRAM in a 100-pin TFBGA (7x7 mm, 1.06 mm height) package. It belongs to the PIC32MZ EF family, which targets connectivity-rich applications across industrial, IoT, graphics/HMI, and motor control market segments. The device operates from a 3.3 V supply and integrates a floating-point unit (FPU), hardware crypto accelerator (varies by part variant - this 'G' variant ships without crypto and without CAN-FD), and a rich peripheral set including USB-HS, Ethernet MAC, SQI, and up to 14 channels of DMA. Industrial temperature range -40C to +85C is supported by the -I suffix. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one silicon die. Within the broader semiconductor hierarchy, an MCU belongs to the embedded processor category, which also includes DSPs, FPGAs with embedded cores, and microprocessors. The PIC32MZ EF family sits in the upper-performance tier of Microchip's PIC32 portfolio, distinguished from the PIC32MX series by an out-of-order superscalar CPU pipeline, higher clock rates, larger memory, and integrated connectivity peripherals such as 10/100 Ethernet and USB 2.0 High-Speed with embedded PHY. Key features of the PIC32MZ1024EFG100-I/GJX include 200 MHz core speed (252 MHz on the EF family in general; 200 MHz is the spec for this specific speed grade), 1 MB program Flash with live update capability, 512 KB SRAM, 4 KB of EEPROM emulation, hardware crypto engine (NOTE: the 'G' variant family name is shared; this specific GJX SKU does not include the crypto module - the EFG100 'G' suffix denotes 'no crypto, no CAN' per distributor descriptions, while EFG100 'E' suffix denotes crypto and CAN), 12-bit 18 Msps ADC up to 48 channels, and a 9-bit or 12-bit DAC. The 100-pin TFBGA package supports up to 78 user I/O pins with extensive peripheral multiplexing. The architecture combines a MIPS microAptiv core with a dedicated multi-port bus matrix, allowing concurrent CPU and DMA transfers to Flash, SRAM, and peripherals without bus contention. Prefetch cache and instruction cache minimize Flash wait-states at high clock rates. This design is particularly effective for graphical HMI stacks (where multiple frame buffers can stream via DMA while the CPU renders UI elements) and for networked IoT gateways that must run an RTOS plus TLS simultaneously. Typical applications include industrial control HMIs with TFT LCD, IoT edge gateways with Ethernet and USB-HS connectivity, motor-control FOC drives leveraging the 12-bit high-speed ADC and PWM, medical patient monitoring, automotive body and infotainment subsystems, and consumer audio products that benefit from the I2S and SQI interfaces. The wide operating temperature and large memory make it suitable for RTOS-based designs running TCP/IP stacks, USB device/host stacks, and graphical frameworks. When designing with this MCU, allocate adequate decoupling (100 nF + 4.7 uF per VDD/VBAT pin) and follow Microchip's recommended trace impedance for the Ethernet and USB differential pairs. Boot configuration straps (BOOT0/BOOT1) and the trace-disabled fuse map affect bootloader selection, and unused peripherals should be clock-gated via PMD registers to meet low-power budgets. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not consolidated on the manufacturer datasheet cover page.

USD $12.50 재고 있음

PIC32MZ1024EFG100-I/PT

PIC32MZ1024EFG100-I/PT - 32-bit 200MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) family, running up to 200 MHz core frequency with 330 DMIPS / 3.28 CoreMark/MHz performance. It integrates 1 MB of dual-panel Flash, 256 KB SRAM (with up to 512 KB SRAM in EF-family variants), and a hardware floating-point unit, all packaged in a 100-pin TQFP (PT) measuring 12x12 mm. The device targets connectivity, industrial, IoT, graphics/HMI, and motor-control applications. A 32-bit MCU (microcontroller unit) is an integrated circuit containing a 32-bit processor core, program and data memory, plus a rich set of peripherals (ADC, timers, communication interfaces, GPIO). Within the broader taxonomy, the PIC32MZ EF sits above general-purpose MCUs and below application processors, sitting in the same category as ARM Cortex-M4/M7 devices but built around the MIPS M-Class core from Imagination. EF-family devices specifically add a hardware FPU, large SRAM, dual-panel Flash for live update, and high-speed connectivity peripherals including Ethernet, USB, CAN, and SQI for external Flash expansion. Key features include the MIPS32 M-Class core with FPU, 1 MB dual-panel live-update Flash, large SRAM, 12-bit ADC with up to 40 input channels, eight DMA channels, and a comprehensive set of connectivity peripherals: 10/100 Mbps MAC, USB 2.0 high-speed OTG, CAN 2.0B, multiple UART/SPI/I2C, and a dedicated SQI (Serial Quad Interface). The 100-pin TQFP provides 78 GPIO, 9 16-bit timers, and a parallel master port (PMP) for external memory/display expansion. Architecture highlights: dual-panel Flash supports live firmware updates without device reset, the MIPS M5150 core uses a 6-stage pipeline with branch prediction, hardware multiply/divide, and a single-precision IEEE 754 FPU. The system bus is matrixed to DMA and peripherals for low-latency data movement, suitable for graphics HMI and motor-control loop execution. Typical applications include industrial connectivity gateways with Ethernet, USB host/device bridging, and SQI-based external Flash; graphics/HMI touch panels using PMP to drive TFT displays; motor-control FOC systems using the high-resolution PWM and fast ADC; medical instrumentation requiring deterministic USB or Ethernet connectivity; and IoT edge nodes combining CAN, Ethernet, and Crypto acceleration (note this part is the no-Crypto variant). When designing with this part, plan the 100-pin TQFP PCB footprint carefully: 0.4 mm pitch with a 16x16 mm body requires 4-layer routing for full GPIO and analog reach. Place a 12 MHz primary crystal with appropriate guard rings and route the Ethernet MII/RMII signals as 50-ohm impedance-controlled pairs. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical 100-pin TQFP layout notes beyond what the manufacturer datasheet front-line offers.

USD $8.94 재고 있음

PIC32MZ1024EFG100T-250I/PT

PIC32MZ1024EFG100T-250I/PT - 250MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100T-250I/PT is a high-performance 32-bit MIPS M-Class microcontroller running up to 250 MHz with 1 MB of Flash and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package, part of the PIC32MZ EF family without CAN and without Crypto. The PIC32MZ1024EFG100T-250I/PT integrates a Floating Point Unit, Audio & Graphics interfaces, Hi-Speed USB, Ethernet MAC, and advanced analog peripherals, making it a complete system-on-chip for connected embedded designs. A PIC32 microcontroller is a MIPS-based 32-bit MCU built around the M-Class core, which combines high clock rates (up to 250 MHz at the EF performance tier) with deterministic interrupt latency and a rich peripheral set. PIC32 parts sit at the upper end of Microchip's 8/16/32-bit portfolio, targeting applications that need more compute and memory than PIC16 or PIC24 devices can deliver, while remaining programmable with MPLAB X IDE and Harmony framework. Within the family taxonomy, PIC32MZ EF > PIC32MZ > PIC32MX > PIC32, and the EF suffix specifically denotes the high-performance Flash/SRAM tier. Key features of the PIC32MZ1024EFG100T-250I/PT include 1 MB Flash program memory, 512 KB SRAM, a hardware Floating Point Unit for DSP-style math, Hi-Speed USB 2.0 OTG, 10/100 Ethernet MAC with RMII/MII, up to 97 I/O pins shared across multiple 16-bit and 32-bit timers, a 12-bit ADC reaching 500 ksps, and dedicated audio/graphics peripherals (I2S, SQI for external graphics). The integrated FPU lets developers execute DSP and audio processing routines without software emulation. This device uses Microchip's PIC32MIPS32 M-Class core with 5-stage pipeline, dual-issue superscalar capability, and tightly-coupled peripherals, achieving 252 MHz in the -250 speed grade. With 1 MB Flash and 512 KB SRAM it can host networking stacks (TCP/IP, HTTP, MQTT) plus rich graphics simultaneously, while the 100-pin TQFP package offers a 0.4 mm pitch to balance routing density and ease of hand-rework. Typical applications include industrial IoT gateways, graphics HMI panels, motor control boards, audio processing units, and connected sensor hubs. The wide memory and rich peripheral mix also suit medical patient monitors, automotive infotainment prototypes, and home automation concentrators. When designing with the PIC32MZ1024EFG100T-250I/PT, allocate 8-16 KB of Flash for a robust bootloader and reserve the SQI interface for external QSPI memory if user-interface assets exceed internal storage. The -250I suffix denotes the industrial temperature range -40C to +85C, so verify thermal margins for enclosed industrial cabinets. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32MZ EF family, and practical design notes beyond the manufacturer datasheet summary.

USD $6.45 재고 있음

PIC32MZ1024EFG100T-I/GJX

PIC32MZ1024EFG100T-I/GJX - 200MHz 1MB Flash MCU 100-TFBGA | Microchip

The Microchip PIC32MZ1024EFG100T-I/GJX is a 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family running up to 200 MHz with 1 MB Flash, 512 KB SRAM, and integrated FPU, USB-HS, Ethernet and SQI interfaces. It is housed in a 100-pin TFBGA (7x7 mm) package with industrial -40C to +85C temperature rating. A 32-bit microcontroller (MCU) is a single-chip processor with integrated Flash program memory, SRAM data memory, and peripherals such as timers, ADC, communication controllers and GPIOs. PIC32MZ EF devices target high-performance connectivity applications - sitting in the hierarchy: microcontroller -> embedded MCU -> 32-bit MIPS MCU -> PIC32MZ EF family -> graphics/HMI, industrial, automotive and IoT segments. The PIC32MZ1024EFG100T-I/GJX carries 1 MB Flash (1024 KB, no crypto), 512 KB SRAM, and a peripheral set including Hi-Speed USB 2.0, 10/100 Ethernet MAC, SQI for external serial Flash, and a graphics-friendly 32-bit external bus. Key features include a 200 MHz MIPS32 M-Class core with 252 MHz maximum rated clock (per family datasheet), IEEE 754 single-precision FPU, 12-bit 18 MSPS ADC, and a Cryptographic Engine in the EF family (this part is the non-crypto variant). The 100-TFBGA (GJX) package is the compact 7x7 mm option for space-constrained designs, while a 100-TQFP (PF) variant exists for hand-solder prototypes. Typical applications include industrial Human-Machine Interface (HMI) panels, IoT gateways with Ethernet and USB-HS, automotive infotainment prototypes, and motor-control boards where the 200 MHz MIPS core and FPU accelerate FFT and DSP-style filtering. The integrated Ethernet MAC and Hi-Speed USB controller reduce BOM by eliminating external PHY companion chips on simpler designs. Design tip: at 200 MHz with 1.2V core, decoupling requires a 1uF + 100 nF pair within 5 mm of each VDD/VSS pair, and trace length matching for SDRAM if used. The non-crypto variant is intended for designs that do not need the on-chip Crypto Engine. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $8.45 재고 있음

PIC32MZ1024EFG100T-I/PF

PIC32MZ1024EFG100T-I/PF - 200MHz 32-bit MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFG100T-I/PF is a high-performance 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 1 MB of Flash and 512 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) footprint with industrial-grade -40C to +85C temperature rating. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich peripheral set on one die. Within the broader taxonomy, it sits as: microcontroller -> embedded processor -> integrated circuit -> semiconductor. 32-bit MCUs deliver higher computational throughput, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit predecessors, enabling embedded graphics, connectivity stacks, and DSP workloads in a single device. Key features of the PIC32MZ1024EFG100 include a MIPS32 M-Class core with DSP extensions and FPU, dual Flash panels for live updates, 8 KB of I-cache and 4 KB of D-cache, a 9-channel DMA controller, and a 12-bit 500 ksps ADC with up to 48 analog inputs. Communication peripherals include USB 2.0 High-Speed with PHY, 10/100 Mbps Ethernet MAC with IEEE 1588 PTP support, two CAN 2.0B controllers, six UART/SPI/I2C modules, and a 4-wire Serial Quad Interface (SQI) for external serial Flash expansion. Architecturally, the device uses a five-stage pipeline and tightly-coupled memory buses that allow sustained 1.84 DMIPS/MHz throughput. The integrated FPU accelerates single and double-precision IEEE 754 operations, making the part well suited for sensor fusion and control-loop math. Hardware crypto is not present on the EFG variant; the EFF family suffix indicates the FPU-enabled DSP-rich line without on-chip encryption accelerators. Typical applications include industrial IoT gateways, HMI/touchscreen controllers, motor control (BLDC/PMSM FOC), automotive infotainment prototypes, and graphics-rich embedded systems. The 100-TQFP package provides generous I/O for parallel displays and multi-bus connectivity. When designing with this part, allocate decoupling per the datasheet's power distribution diagram and use the SQI interface to expand non-volatile storage for file systems or OTA update staging. This page synthesizes distributor pricing, drop-in alternatives, and design notes not consolidated on the manufacturer product page, providing engineers a faster path to BOM validation.

USD $8.75 재고 있음

PIC32MZ1024EFG100T-I/PT

PIC32MZ1024EFG100T-I/PT - 32-Bit 200MHz MCU, 1MB Flash, 100-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFG100T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller with FPU running at up to 200 MHz, integrating 1 MB (1024 KB) of Flash and 512 KB of SRAM in a 100-pin TQFP (12x12 mm) package. It targets connectivity-rich applications spanning industrial, IoT, automotive, graphics/HMI, and motor-control segments within the PIC32MZ EF family. A 32-bit MCU is a microprocessor that executes 32-bit instructions per cycle, allowing single-cycle arithmetic on larger data words than 8- or 16-bit devices. The PIC32MZ EF family further integrates a Floating Point Unit (FPU) for hardware-accelerated single- and double-precision math, plus a MIPS32 M-Class core positioned between MCU and MPU in the embedded-computing hierarchy. This combination makes the EF family well suited to networked embedded products that need both deterministic control and high-throughput data processing. Key features include 200 MHz core speed with hardware FPU, 1 MB Flash / 512 KB SRAM, integrated USB-HS, Ethernet MAC, SQI (Serial Quad Interface), CAN, 12-bit ADC with up to 40 analog inputs, and 8 DMA channels for low-CPU-overhead data movement. The 100-TQFP package provides 78 user I/O pins, suitable for designs that need abundant GPIO plus multiple high-speed peripherals operating simultaneously. The PIC32MZ EF architecture uses a 5-stage pipeline, separate instruction and data caches, and a tightly-coupled DMA fabric, allowing deterministic peripheral response while sustaining high code density. The integrated crypto engine (not present on the -I/PT grade "No Crypto" variant) is bypassed on this part, simplifying firmware bring-up for non-secure applications while retaining full peripheral richness. Typical applications include industrial IoT gateways, Ethernet-connected HMI panels, USB peripherals and embedded graphics controllers, automotive body and infotainment subsystems, and digital motor-control platforms. The wide connectivity mix (USB-HS, Ethernet, CAN, SQI) makes it a strong fit for protocol-bridging designs that must marshal between fieldbus, Ethernet, and USB domains. When designing, allocate the dedicated analog and digital supply pins as specified in the datasheet, keep the 12-bit ADC reference traces short, and follow Microchip's recommended decoupling scheme. The T variant indicates tape-and-reel packaging; verify reel quantity (standard 1000/reel for TQFP-100) before quoting build-of-material. This page consolidates distributor pricing, drop-in PIC32MZ EF alternatives, and design notes drawn from the manufacturer datasheet - useful context beyond the data sheet itself.

USD $6.10 재고 있음

PIC32MZ1024EFG124-I/TL

PIC32MZ1024EFG124-I/TL - 200MHz 32-bit MCU 1MB Flash 124-VTLA | Microchip

The Microchip Technology PIC32MZ1024EFG124-I/TL is a 32-bit MIPS32 M-Class microcontroller running up to 200 MHz with 330 DMIPS performance, delivering 1 MB of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. The device integrates a high-performance MIPS Warrior M-class core with a hardware Floating Point Unit (FPU), dual-panel Flash for live-update support, and four 64-bit accumulators with single-cycle MAC and IEEE 754-compliant single/double-precision math. The industrial-grade -I temperature variant supports operation from -40C to +85C, making it suitable for harsh environments. A 32-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, memory, and programmable peripherals on one die. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit portfolio, bridging the gap between traditional 8/16-bit PIC microcontrollers and the more complex application processors, with deterministic real-time behavior, mature toolchains, and rich connectivity peripherals. Within the system hierarchy, it belongs to embedded controllers -> microcontrollers -> 32-bit microcontrollers -> MIPS architecture MCUs -> connectivity-focused MCUs. Key features include HS USB 2.0 with integrated PHY, 10/100 Mbps Ethernet MAC with RMII/MII interface, SQI (Serial Quad Interface) for high-speed external memory, and a 12-bit ADC at 500 ksps with up to 48 analog inputs. The device provides up to 97 programmable I/O lines, four I2C/SPI/UART peripherals, and dedicated DMA channels that offload data movement from the CPU, enabling deterministic real-time response in connected embedded systems. The PIC32MZ EF architecture combines DSP-enhanced instructions (single-cycle MAC, saturating arithmetic) with floating-point hardware acceleration, making it suitable for both control loops and signal-processing tasks. The dual-panel Flash enables in-field firmware updates without downtime, while the cryptographic accelerator (on the EFK variant) provides hardware AES/TDES/SHA support. The integrated High-Speed USB 2.0 PHY eliminates external transceiver chips, reducing BOM cost for connected device designs. Typical applications include industrial IoT gateways, HMI and graphics terminals, Ethernet-connected motor control, USB audio interfaces, automotive connectivity modules, and secure connected sensors. The combination of 1 MB Flash and rich peripherals also supports prototyping for industrial automation protocols (Modbus TCP, EtherCAT slave, PROFINET) and Bluetooth/WiFi co-processor designs. When designing with this part, allocate sufficient decoupling on each VDD/VSS pair (typically 100 nF + 4.7 uF), route the USB differential pair with 90-ohm impedance, and provide a stable 12 MHz crystal reference for the Ethernet PHY. The 124-VTLA package requires careful thermal pad soldering; follow Microchip's recommended reflow profile and PCB land pattern to ensure reliable assembly. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, providing an engineer-ready single reference for selection and BOM management.

USD $9.80 재고 있음

PIC32MZ1024EFG144-E/PL

PIC32MZ1024EFG144-E/PL - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFG144-E/PL is a high-performance 32-bit MIPS Warrior M-class microcontroller with FPU, integrating 1 MB of dual-panel Flash, 512 KB SRAM, and 160 KB boot Flash in a 144-pin LQFP (PL) 20x20 mm package. It runs up to 200 MHz (180 MHz core clock with peripheral bus at 100 MHz per device marking) targeting industrial, IoT, automotive and HMI/motor control designs. AEC-Q100 qualification is supported on the -E temperature grade (-40C to +125C). A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the broader hierarchy, this PIC32MZ EF part belongs to the 32-bit MCU family (32-bit -> MCU -> microcontroller -> embedded processor -> semiconductor), superseding older 8/16-bit MCUs in applications that demand DSP extensions, single-cycle MAC, IEEE 754 floating point, and deterministic interrupt latency. Key features include an IEEE 754 FPU, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, 12-bit 48-channel ADC, 12 DMA channels, Hi-Speed USB, Ethernet MAC, and hardware crypto/hash accelerator variants within the EF family. Dual-panel Flash enables live field updates without downtime. The 144-pin LQFP provides 120+ GPIO with multiple 5V-tolerant pins for mixed-voltage interfacing. Architecturally, the EF family uses the MIPS microAptiv core with DSP extensions and a tightly coupled FPU, achieving 330 DMIPS at 200 MHz. The dual-panel Flash is partitioned for seamless Live Update operation, while dedicated boot Flash (160 KB) supports secure firmware bootloaders. Peripherals are interconnected through a high-bandwidth bus matrix that lets the DMA engine move data between ADC, USB, Ethernet and SRAM without CPU intervention. Typical applications include industrial PLC controllers, automotive instrument clusters and HMI panels, IoT gateways with Ethernet, motor-control FOC drives, and graphics-enabled HMI terminals. Designers benefit from the Live Update capability for remote firmware deployment in deployed assets. When designing with this device, allocate sufficient decoupling (100 nF + 10 uF near each VDD pin pair), follow the 144-LQFP layout guideline with a continuous ground plane under the exposed pad route, and reserve the 5V-tolerant pins for legacy logic interfacing. Program flash endurance (1k minimum erase/write cycles per sector) should be considered for high-write applications. This page synthesizes distributor pricing, drop-in same-package alternatives, comparison tables, and practical design notes drawn from the PIC32MZ EF Family datasheet and reference designs, providing context that is not duplicated on any single source page.

USD $9.05 재고 있음

PIC32MZ1024EFG144T-E/JWX

PIC32MZ1024EFG144T-E/JWX - 32-bit MCU 1MB Flash / 200MHz / 144-TFBGA | Microchip

The Microchip Technology PIC32MZ1024EFG144T-E/JWX is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz (200 MHz core clock per Microchip's PIC32MZ EF family datasheet, with the -E/JWX speed grade offering 180 MHz as labeled on distributor listings) and integrating 1 MB of Flash plus 512 KB of SRAM in a 144-pin TFBGA (7 mm x 7 mm) package. The device is fabricated on CMOS technology and supports 3.3 V operation with AEC-Q100 automotive qualification and an extended -40C to +125C temperature range, suiting it to harsh industrial and automotive environments. A 32-bit microcontroller (MCU) is an integrated processor core, program/data memory, and a rich mix of peripherals on a single die. PIC32MZ EF series parts sit at the top of the Microchip PIC32 portfolio, occupying the high-performance 32-bit tier above the older PIC32MX parts; in the broader hierarchy they belong to MCU -> microcontroller -> embedded processor -> semiconductor IC. The "PIC" prefix denotes Microchip's proprietary architecture family, "32" the 32-bit datapath, "MZ" the high-performance family, and "EF" the connectivity-rich sub-family featuring Ethernet, USB, and graphics-oriented peripherals. Key features include a MIPS M5150-class core with DSP extensions, 12-bit ADC up to 5 Msps, multiple UART/SPI/I2C peripherals, Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, a hardware Floating Point Unit (FPU), 8-channel DMA, capacitive touch hardware (CTMU), and an integrated crypto engine absent on the JWX-tail variants. The 1 MB Flash / 512 KB SRAM split is the largest in the EFG family and supports complex TCP/IP stacks, graphics framebuffers, and audio processing. The 144-TFBGA package exposes 120+ GPIO for system integration. From an architectural standpoint, the PIC32MZ EF parts use a 5-stage pipeline, dual-issue integer core, and dedicated DSP/FPU datapaths. Memory is unified Harvard with separate Flash and SRAM buses; an L1 cache and prefetch buffer accelerate Flash accesses. An on-chip LDO and switching regulator supply the core, and a multi-phase PLL synthesizes the system clock. Up to nine 16-bit timers, nine input capture, nine output compare, and four SQI (Serial Quad Interface) ports provide high-throughput deterministic I/O. Typical applications include industrial Ethernet gateways, automotive HMI clusters, high-resolution audio peripherals, multi-axis motor controllers, IoT edge nodes with TLS/IPsec, and medical patient-monitoring displays. The 1 MB Flash enables full feature firmware and dual-image bootloaders. Designers should note that the "JWX" pinout omits the crypto engine and CAN-FD peripherals found on the EFE/EFI variants; if you need CAN-FD or hardware crypto, choose the EFE/EFI suffix parts instead. Always validate signal-integrity on the high-speed USB and Ethernet pairs against the manufacturer's reference design.

USD $5.85 재고 있음

PIC32MZ1024EFG144T-I/PH

PIC32MZ1024EFG144T-I/PH - 200MHz MIPS MCU 1MB Flash 144-TQFP | Microchip

The Microchip PIC32MZ1024EFG144T-I/PH is a 32-bit MIPS microcontroller from the PIC32MZ EF family, delivering up to 200 MHz core performance with 1 MB of Flash and 512 KB of SRAM in a 144-pin TQFP package. It integrates a MIPS Warrior M-class core with DSP extensions, an IEEE 754 hardware floating-point unit, and four 64-bit accumulators capable of single-cycle MAC operations. The device targets connectivity-intensive embedded designs in industrial, automotive, IoT, graphics/HMI, and motor-control segments. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of programmable peripherals. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit portfolio, combining application-processing headroom (330 DMIPS) with deterministic real-time control and connectivity peripherals such as Ethernet, USB, CAN, and multiple UART/I2C/SPI ports. Key features of this variant include 1 MB dual-panel Flash for live field updates, 512 KB SRAM, six UART, four SPI, five I2C, two CAN, one USB (Host/Device/OTG), one Ethernet MAC, nine timers, eight DMA channels, and a 12-bit ADC at 500 ksps. The hardware FPU accelerates single-precision floating-point math, while the DSP extensions enable saturating and fractional arithmetic for motor control and audio DSP without software emulation overhead. Architecture details worth highlighting: the dual-panel Flash bank structure allows a running application to reprogram the inactive bank and swap in a new image with zero downtime, ideal for firmware OTA and IEC 61508 SIL targets. The 16-bit external data bus and 24-bit address bus deliver ample memory-mapped bandwidth for external peripherals or LCD controllers, and 120 general-purpose I/O lines provide flexible board-level interfacing. Typical applications include industrial automation controllers, Ethernet-connected HMI panels, automotive body and gateway modules, IoT edge gateways with TLS, and graphics terminals using the integrated LCD controller. The wide peripheral mix and 200 MHz throughput also suit BLDC/PMSM motor drives using field-oriented control. When designing with this MCU, ensure the 3.3V rail is well-decoupled near the package and that the trace lengths to the Ethernet PHY and USB connector are impedance-controlled (90 ohm differential for USB, 100 ohm for Ethernet). The TQFP-144 footprint leaves generous room for crystal placement, but the VQFN-144 variant (PIC32MZ1024EFG144T-I/JWX) is preferred when board height is constrained. This page synthesizes distributor pricing from six channels, drop-in and same-package alternatives drawn from the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet - including power-rail decoupling patterns and live-update flash best practices.

USD $8.83 재고 있음

PIC32MZ1024EFH064-E/MR

PIC32MZ1024EFH064-E/MR - 32-bit MCU, 1MB Flash, 200MHz, AEC-Q100 | Microchip

The Microchip Technology PIC32MZ1024EFH064-E/MR is a 32-bit MIPS Warrior M-class microcontroller (MCU) running up to 200 MHz, delivering 330 DMIPS, with 1 MB Flash, 512 KB SRAM, and an IEEE 754-compliant floating point unit (FPU). Housed in a 64-lead QFN (9x9 mm) package with exposed thermal pad, this automotive-grade (AEC-Q100 qualified) variant targets high-performance connectivity, graphics (HMI), industrial, IoT, and motor-control applications. A 32-bit microcontroller (MCU) is a programmable embedded processor that combines a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. Within the PIC32 family hierarchy, the PIC32MZ EF (Embedded Connectivity with Floating Point Unit) sub-family sits at the high-performance tier, positioned above the PIC32MX general-purpose line and below the PIC32MZ DA/WB graphics-focused variants, and is used where DSP performance, dual-panel live-update Flash support, and FPU math are required. Key features include a single-cycle hardware multiply-accumulate engine with four 64-bit accumulators and saturating/fractional math support, a 12-bit ADC with up to 24 analog channels, a 10/100 Ethernet MAC, HS USB 2.0 (host/device/OTG), CAN, I2S, and dual-panel Flash for live firmware updates. The MIPS Warrior M-class core also provides DSP-extensions (DSP-enhanced ASE), accelerating FFT, FIR, and motor-control loops. Architecturally, the device combines a 5-stage MIPS32 pipeline, separate instruction and data caches, a dedicated DMA controller with multiple channels, and an integrated FPU that accelerates single- and double-precision IEEE 754 operations. The dual-panel Flash partition allows the application to swap between two firmware images, enabling fail-safe OTA updates without production-line downtime. Typical applications include industrial Ethernet-connected motor drives, automotive HMI clusters, USB-based data-acquisition modules, secure IoT gateways, and graphics/display controllers. The AEC-Q100 grade and -40C to +125C operating temperature range also suit under-hood automotive ECUs and factory-floor PLCs. When designing with this part, ensure the exposed thermal pad is soldered to a sufficient copper pour to meet thermal and electrical grounding requirements; the pad is the primary heat-dissipation path. Program the dual-panel Flash partition before deployment if live firmware update is required. This page synthesizes distributor pricing, drop-in Microchip alternatives (PIC32MZ EF variants), AEC-Q100 cross-references, and practical design notes not collected in the manufacturer datasheet.

USD $8.74 재고 있음

PIC32MZ1024EFH064-E/PT

PIC32MZ1024EFH064-E/PT - 200MHz 32-bit FPU MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH064-E/PT is a high-performance 32-bit MIPS M-Class microcontroller featuring an integrated Floating Point Unit (FPU), 1 MB of Flash program memory and 512 KB of SRAM, all housed in a 64-pin TQFP (10x10 mm) package. The device is specified for the extended industrial temperature range of -40C to +125C, operates from 2.3 V to 3.6 V core/IO supply, and runs the MIPS Warrior M-class core at up to 200 MHz delivering 330 DMIPS of computational throughput. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of I/O peripherals on one die. The PIC32MZ EF family sits within Microchip's PIC32 family hierarchy as PIC32 -> PIC32MZ -> PIC32MZ EF, targeting connectivity applications in Industrial, IoT, graphics HMI, and motor control. Compared with 8-bit MCUs, 32-bit devices execute instructions on wider data paths, support larger address spaces, and incorporate DSP and FPU engines for signal-processing math. Key features of the PIC32MZ1024EFH064 include four 64-bit accumulators supporting single-cycle MAC, saturating and fractional math operations, and IEEE 754-compliant single/double precision FPU for fast single-precision math. The integrated DSP engine accelerates signal-processing kernels, and the Dual Panel Flash architecture enables live field-update support without downtime. Hardware crypto is not included on this variant; for cryptographic acceleration the PIC32MZ1024EFE064 part number is the appropriate derivative. The architecture pairs a 200 MHz MIPS M-class core with a dedicated FPU and DSP, and on-chip peripherals include Hi-Speed USB 2.0 (480 Mbps), 10/100 Ethernet MAC, CAN 2.0, multiple UART/SPI/I2C, 12-bit ADC at 18 MSPS, and 32-bit parallel master port for external graphics controllers. A 200 MHz CPU core feeding a 32-bit Flash/SRAM bus typically yields 1.85 DMIPS/MHz, equivalent to 330 DMIPS at peak, while DSP operations add headroom for FFT, FIR and audio codecs. Typical applications include industrial automation, HMI and graphics display controllers, IoT gateways, motor control drives, audio processing systems, and automotive body/motor control. The wide peripheral mix makes it a strong fit for connected products that need simultaneous Ethernet, USB and CAN connectivity. Compared with competing Cortex-M4F devices the PIC32MZ EF adds a higher-resolution ADC and a parallel master port, but its architectural complexity and lower peripheral pin availability trade off against the simpler M-class ecosystem. When designing with the PIC32MZ1024EFH064-E/PT, allocate ample decoupling (typically 100 nF + 4.7 uF near each VDD/AVDD pair), follow Microchip's documented 64-pin TQFP land pattern, and configure the boot mode strapping pins early. Use MPLAB Harmony v3 for peripheral initialization. This page synthesizes cross-brand references, distributor pricing and application notes not always visible in the bare datasheet.

USD $8.72 재고 있음

PIC32MZ1024EFH064-I/MR

PIC32MZ1024EFH064-I/MR - 200MHz 1MB 32-bit MCU | Microchip

The Microchip Technology PIC32MZ1024EFH064-I/MR is a high-performance 32-bit microcontroller built around the MIPS32 M-Class Warrior core running at 200 MHz (252 MHz maximum on the PIC32MZ EF family), with 1 MB (1M x 8) of Flash and 512 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. It integrates an IEEE 754 single-precision Floating Point Unit (FPU), DSP enhancements with four 64-bit accumulators and single-cycle MAC, plus a rich connectivity peripheral set including HS USB 2.0, 10/100 Ethernet MAC, CAN 2.0B, SQI, I2C, SPI, UART, and a 12-bit ADC reaching up to 40 Msps. What is a 32-bit PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's premium high-speed MIPS-based MCU line, designed for embedded applications demanding deterministic real-time performance, large memory footprints, and rich connectivity. It belongs to the broader category of 32-bit microcontrollers within the embedded microcontroller hierarchy (32-bit MCU -> MCU -> semiconductor), and the PIC32MZ EF sub-family specifically addresses industrial, automotive, IoT, graphics/HMI, and motor-control market segments. The 'EF' suffix denotes Embedded Connectivity with Floating Point Unit, distinguishing it from the EFH variant without crypto acceleration and the EFF variant without FPU. Key features include 200 MHz CPU core, dual-panel Flash for live field update, 1 MB program memory, 512 KB SRAM, 4 KB auxiliary Flash, integrated HS USB 2.0 PHY, 10/100 Ethernet MAC, dual CAN 2.0B controllers, a Parallel Master Port (PMP) for graphics, and a 32-channel 12-bit ADC. The 64-pin QFN package offers a 9 mm x 9 mm footprint with 0.5 mm pitch and exposed pad for thermal dissipation, making it suitable for space-constrained designs. The device operates from 2.3 V to 3.6 V and supports an industrial temperature range of -40 °C to +85 °C. The architecture provides deterministic interrupt latency, a 16 KB instruction cache, and a tightly-coupled memory controller, enabling high-throughput DSP and control loops. Crypto acceleration is intentionally omitted on this 'no-crypto' variant. Typical applications include industrial IoT gateways, HMI/graphics terminals, motor control and servo drives, automotive telematics, building automation controllers, and connectivity-rich embedded products. The combination of 1 MB Flash and 512 KB RAM makes it well suited to applications running advanced protocol stacks such as TCP/IP, USB HID/CDC, and CANopen simultaneously. When designing with this device, use MPLAB X IDE with MPLAB Harmony v3 for peripheral drivers and middleware. Allocate decoupling capacitance of 0.1 µF + 1 µF near each VDD pin, and connect the exposed pad to a continuous ground plane for thermal dissipation. The integrated FPU simplifies single-precision floating-point math, eliminating the need for fixed-point scaling in many control algorithms. This page consolidates distributor pricing, pin-compatible same-family alternatives, application guidance, and design considerations not present in the manufacturer datasheet, enabling faster component selection for connectivity-centric embedded designs.

USD $7.25 재고 있음

PIC32MZ1024EFH064-I/PT

PIC32MZ1024EFH064-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MZ1024EFH064-I/PT is a high-performance 32-bit microcontroller built on the MIPS32 M-Class Warrior core with an integrated IEEE 754-compliant Floating Point Unit (FPU), 1 MB of dual-panel Flash, and 256 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. It runs up to 200 MHz core clock delivering 330 DMIPS and integrates DSP extensions with four 64-bit accumulators and single-cycle MAC, saturating, and fractional math support. A 32-bit microcontroller (microcontroller) is a single-chip computer that integrates a processor core, program and data memory, and a rich set of peripherals around a shared bus. Within the broader taxonomy, a 32-bit MCU sits above 8/16 bit MCUs and below microprocessors in compute class, while still belonging to the semiconductor / integrated circuit family. The PIC32MZ EF family specifically targets applications requiring high throughput, large memory, and connectivity peripherals (Ethernet, USB, CAN, SQI). The FPU accelerates single/double-precision math and reduces latency in motor control, graphics, and signal-processing loops. Key features include 1 MB Flash with dual-panel live update, 256 KB SRAM, hardware FPU and DSP, 200 MHz / 330 DMIPS core, IEEE 754 single/double precision, up to 53 general-purpose I/O, SQI, USB 2.0 high-speed OTG, dual CAN, 10/100 Ethernet MAC, 12-bit ADC at 500 ksps, and multiple UART/SPI/I/MC I2S peripherals. Operating temperature is -40C to +85C and supply voltage is 2.3V-3.6V, with a low-power sleep mode down to 100 nA. Architecture is a 5-stage MIPS M-class pipeline with hardware multiply/divide, dual Watchdog timers, and a 32-bit core timer. Dual-panel Flash enables firmware live-update without downtime, and the crypto-acceleration path is available on FPU 'F' variants. Typical applications include industrial automation, HMI graphics, motor control (BLDC/PMSM FOC), IoT gateways, and automotive connectivity nodes. For motor control, the FPU and DSP extensions reduce torque-loop computation time below 1 microsecond. For HMI, the integrated graphics peripherals and large RAM support TFT LCDs up to 480x272 without external memory. When designing, ensure the supply rail includes a bulk + decoupling network per Microchip ANTC203 layout guide, and respect 64-VRMS CTE compliance on the TQFP thermal pad. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7.69 재고 있음

PIC32MZ1024EFH064T-I/MR

PIC32MZ1024EFH064T-I/MR - 200MHz 1MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ1024EFH064T-I/MR is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a 200MHz MIPS Warrior M-class core with DSP extensions and an IEEE 754-compliant FPU, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. The device integrates 1MB (1M x 8) of dual-panel Flash memory supporting live firmware updates, 512KB SRAM, and a rich peripheral set including 24 channels of 12-bit ADC, 9 PWM channels, 12 DMA channels, and high-speed connectivity options such as CAN, 3x SCI, 5x I2C, LIN, and SPI. A 32-bit microcontroller (MCU) is a microprocessor core with on-chip Flash, SRAM, and peripherals integrated into a single IC, designed for embedded control applications. The PIC32MZ EF family belongs to the broader MIPS32 architecture lineage now maintained by Microchip, with the EF sub-family targeting high-performance connectivity, graphics (HMI), and motor control applications. Within the system hierarchy, MCUs sit between simple 8-bit microcontrollers and more powerful MPU-class application processors, offering deterministic real-time performance with low power consumption. Key specifications include 330 DMIPS performance, single-cycle MAC with saturating and fractional math, four 64-bit accumulators, and Peripheral Pin Select (PPS) that allows flexible remapping of digital peripherals to any I/O pin. Operating voltage is 3.3V (2.0-3.6V), and the industrial temperature range is -40C to +85C. The Dual Panel Flash architecture enables simultaneous read/write, supporting live firmware update without downtime. Typical applications include industrial automation controllers, IoT edge nodes with Ethernet connectivity, automotive infotainment and HMI displays, motor control FOC drives, and multi-protocol bridge gateways. The combination of 1MB Flash and 512KB SRAM supports complex protocol stacks such as TCP/IP, USB, and graphics libraries in MEB (Microchip Embedded Browser) or LVGL frameworks. When designing with this device, ensure proper decoupling (100nF + bulk) near each power pin and connect the exposed pad to a solid ground plane for thermal dissipation. The PPS system requires careful configuration at startup to avoid bus contention. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ family, and practical design notes not found in the manufacturer datasheet.

USD $7.65 재고 있음

PIC32MZ1024EFH100-E/GJX

PIC32MZ1024EFH100-E/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024EFH100-E/GJX is a 32-bit MIPS32 M-Class microcontroller in the PIC32MZ EF family, delivering up to 200 MHz core speed with 330 DMIPS and 1 MB of dual-panel Flash plus 512 KB SRAM in a 100-pin TFBGA (7x7) package. The -E suffix designates the -40C to +125C extended industrial temperature grade, while /GJX denotes the TFBGA-100 package option. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO into one IC. Within the broader semiconductor taxonomy, MCUs sit under microprocessors -> processing units -> logic ICs -> integrated circuits. The PIC32MZ EF family specifically targets high-performance embedded connectivity applications requiring FPU-accelerated DSP and real-time deterministic behavior. Key features include a hardware Floating Point Unit (IEEE 754-compliant) for fast single/double-precision math, four 64-bit accumulators with single-cycle MAC, saturating and fractional arithmetic, dual-panel Flash for live field updates without downtime, and a 12-bit 18 MSPS ADC. The device integrates dedicated peripherals for connectivity: USB 2.0 high-speed with PHY, dual CAN 2.0b controllers, Ethernet MAC with RMII/MII, multiple UART/SPI/I2C, and a parallel master port for external memory or graphics TFTs. Technically, the PIC32MZ EF core is built on the MIPS Warrior M-class architecture, providing 5-stage pipeline execution with DSP extensions. The dual-panel Flash architecture allows simultaneous read-while-write operations and over-the-air firmware upgrades - a critical feature for deployed IoT and industrial nodes. The integrated FPU eliminates software emulation overhead, enabling high-speed sensor fusion and audio processing. Typical applications include industrial automation controllers, automotive body and infotainment modules, IoT edge gateways with Ethernet/USB connectivity, graphics HMI touch panels, and motor control drives. The wide operating temperature range and dual-panel Flash make it well-suited for industrial sensor hubs and connected machinery. When designing with this MCU, allocate decoupling capacitors close to each VDD/VSS pair, use the trace impedance guidelines from the PIC32MZ EF family datasheet, and validate the JTAG/ICSP programming interface layout. For Ethernet applications, the integrated RMII PHY interface requires careful length-matched routing. This page synthesizes distributor pricing across six channels, drop-in alternatives, and design notes that complement the manufacturer datasheet - including parametric proximity scoring unavailable elsewhere.

USD $7.65 재고 있음

PIC32MZ1024EFH100-E/PF

PIC32MZ1024EFH100-E/PF - 32-bit MCU 1MB Flash 200MHz TQFP-100

The Microchip Technology PIC32MZ1024EFH100-E/PF is a 32-bit MIPS32 M-Class PIC microcontroller with an integrated IEEE 754-compliant Floating Point Unit, delivering up to 200 MHz / 330 DMIPS performance with 1 MB of dual-panel Flash and 512 KB SRAM in a 100-lead TQFP (14x14 mm) package rated -40C to +125C. An embedded microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals. The PIC32MZ EF family targets high-performance connectivity applications including Industrial, automotive, IoT, Graphics (HMI), and Motor Control. This MCU sits in the hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor, offering connectivity-class compute for Ethernet, USB, and CAN applications. Key features include 1 MB of Flash supporting live-update via dual-panel architecture, 512 KB SRAM, an FPU for fast single- and double-precision math, DSP extensions with four 64-bit accumulators and single-cycle MAC operations, IEEE 754 floating-point compliance, and integrated connectivity peripherals including HS USB, Ethernet, and CAN. The -E suffix denotes the -40C to +125C extended industrial temperature range. The PIC32MZ1024EFH100 architecture pairs a MIPS Warrior M-class core with hardware FPU and DSP-enhanced pipeline, achieving deterministic interrupt latency and 330 DMIPS throughput. The dual-panel Flash supports firmware live-update and failsafe boot, enabling remote firmware upgrades in deployed industrial systems. Integrated crypto acceleration is available on FF/EFE variants; this E/PF part excludes crypto hardware. Typical applications include industrial HMI panels with TFT-LCD controllers, Ethernet-connected PLCs, USB Host/Device industrial gateways, automotive infotainment and telematics, IoT edge nodes with Ethernet, and high-performance motor control with DSP-accelerated signal processing. Designers typically pair it with Microchip's LAN8742A Ethernet PHY, USB3300 ULPI PHY, and KSZ8081 for industrial-grade connectivity. When designing with this MCU, allocate decoupling capacitors (100 nF + 10 uF) close to every VDDCORE and VDDIO pin pair, and provide a 12 MHz primary crystal or external oscillator reference. Verify trace lengths for high-speed USB and Ethernet signals per the PIC32MZ EF hardware reference manual for signal-integrity compliance. This page synthesizes distributor pricing, drop-in same-package alternatives from the Microchip PIC32MZ family, and design notes covering decoupling strategy and connectivity stack selection - engineering context not consolidated in the manufacturer datasheet alone.

USD $12.60 재고 있음

PIC32MZ1024EFH100-E/PT

PIC32MZ1024EFH100-E/PT - 32-bit 180MHz MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH100-E/PT is a high-performance 32-bit MIPS microcontroller based on the MIPS Warrior M-class core, integrating a Floating Point Unit (FPU) and DSP extensions. Operating at up to 180 MHz and delivering 330 DMIPS, this device provides 1 MB of dual-panel Live-Update Flash and 512 KB (reported as 524 KB by some distributors) of SRAM with integrated cache. Housed in a 100-pin TQFP (12x12 mm) package, it is part of the PIC32MZ EF family designed for industrial, automotive, IoT, graphics/HMI, and motor-control applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single silicon die. The PIC32MZ EF family extends the PIC32 architecture into the connectivity-class tier, sitting between the PIC32MX legacy line and the higher-end SAM-class Cortex-M parts. The "EF" suffix denotes Embedded Connectivity with FPU, while the "H100" indicates 100 pins and 1 MB Flash; the trailing "-E" specifies the -40C to +125C extended industrial temperature grade. Key features include 78 general-purpose I/O pins, a 12-bit ADC with up to 40 analog input channels, 12 DMA channels for offloading CPU data movement, Hi-Speed USB 2.0, 10/100 Mbps Ethernet MAC, CAN 2.0B, multiple UART/SPI/I2C interfaces, a hardware crypto accelerator, and an integrated graphics LCD controller. The FPU executes IEEE 754 single- and double-precision operations in hardware, and the DSP engine adds four 64-bit accumulators and single-cycle MAC operations for signal-processing tasks. Typical applications include industrial automation controllers, automotive body and infotainment ECUs, IoT edge nodes with Ethernet connectivity, HMI panels with touch and graphics, and BLDC/PMSM motor-control firmware. The dual-panel Flash enables field firmware upgrades without downtime, while the AEC-Q100 qualification and wide temperature range support harsh-environment deployment. When designing with this MCU, allocate sufficient decoupling (100 nF + bulk) per VDD/VBAT pin pair and follow the Microchip MEB-II or PIC32MZ EF Starter Kit reference layouts to minimize EMI on the high-speed Ethernet and USB traces. Engineers should also enable the instruction cache and prefetch module for code located in upper Flash to maximize the 180 MHz throughput.

USD $10.65 재고 있음

PIC32MZ1024EFH100-I/GJX

PIC32MZ1024EFH100-I/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip PIC32MZ1024EFH100-I/GJX is a high-performance 32-bit MIPS microcontroller running at 200 MHz (252 MHz in some datasheet family documents) with 1 MB of Flash and 512 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It is part of the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family and is targeted at industrial, automotive, IoT, graphics/HMI, and motor-control segments that require both DSP-grade arithmetic and Ethernet-class connectivity. A 32-bit MCU (microcontroller unit) is a single-chip processor integrating a CPU core, program memory (Flash), volatile memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ EF family uses the MIPS32 M-Class architecture, which adds a hardware IEEE 754 floating-point unit and a DSP-enhanced datapath featuring four 64-bit accumulators and single-cycle saturating and fractional math. This puts it in the broader taxonomy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> floating-point MCU -> connectivity MCU (a hypernym set useful for AI knowledge-graph retrieval). Key features include an integrated FPU, Dual Panel Flash for live update support, a 200 MHz / 330 DMIPS core, multiple connectivity peripherals (Ethernet, CAN, USB, SQI), and a 12-bit ADC at up to 18 Msps. The TFBGA-100 (7x7 mm) package enables compact designs where fine-pitch/metal/LGA-style area-array solder joints are acceptable. The device operates across the industrial -40C to +85C range, supports 3.3V single-supply operation, and is RoHS/REACH compliant per the manufacturer product page. The PIC32MZ EF family uses a Harvard-style bus architecture with separate instruction and data paths, a tightly-coupled prefetch module, and a 4-way set-associative cache. The DSP engine is tightly coupled to the FPU, giving single-cycle MAC throughput for signal-processing kernels (FFT, FIR, sensor fusion) without stalling the pipeline. Live-update Dual Panel Flash enables fail-safe firmware upgrades, a critical feature for industrial and IoT deployments. Typical applications include industrial Ethernet gateways, HMI touch panels, motor-control BLDC/PMSM drive boards, automotive telematics, IoT edge nodes, and graphics/HMI front panels. The combination of FPU, DSP, and connectivity peripherals allows a single MCU to replace a CPU + DSP dual-chip solution in many designs. When designing with the PIC32MZ1024EFH100-I/GJX, place the device on a 4-layer PCB with a continuous ground plane to preserve signal integrity on the Ethernet and USB lines. Decouple every VDD/AVDD pair with 100 nF X7R ceramic capacitors placed within 2 mm of the ball, and add bulk 4.7 uF tantalum capacitors for transient response. The 7x7 mm TFBGA land pattern requires NSMD pads with 0.4 mm pitch, ENIG or OSP finish, and laser-cut or chemically-etched solder stencils of 0.1 mm thickness for reliable reflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving an engineer actionable purchasing and substitution guidance for the PIC32MZ1024EFH100-I/GJX.

USD $7.12 재고 있음

PIC32MZ1024EFH100T-E/GJX

PIC32MZ1024EFH100T-E/GJX - 200MHz FPU MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH100T-E/GJX is a high-performance 32-bit MIPS MCU from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, running at 200 MHz with 330 DMIPS and packaged in a 100-ball TFBGA (7x7 mm). It integrates 1 MB of dual-panel Flash and 512 KB of SRAM, plus a hardware IEEE 754-compliant FPU, a DSP-enhanced core with four 64-bit accumulators, and a rich set of connectivity peripherals including USB-HS, Ethernet (ENET), CAN, and SQI. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a wide range of peripherals such as timers, ADCs, communication interfaces, and GPIOs into one package. MCUs sit at the heart of embedded systems across consumer, industrial, automotive, and IoT products. Within the taxonomy, an MCU is a subset of microcomputer -> embedded processor -> semiconductor device. The PIC32MZ EF family specifically targets connectivity-intensive applications that demand both DSP-class signal processing and a floating-point unit on the same die. Key features include 200 MHz core clock with 330 DMIPS throughput, four 64-bit accumulators for single-cycle MAC operations, IEEE 754-compliant hardware FPU, dual-panel Flash for live firmware update support, hardware crypto acceleration (the 'H' sub-class), 8-channel DMA, 16-bit ADC, multiple UART/SPI/I2C/CAN/Ethernet interfaces, USB-HS, and an operating voltage range of 2.3V to 3.6V. The TFBGA-100 (GJX) package measures 7x7 mm and supports -40C to +125C extended operating temperature, suitable for industrial environments. Architecturally, the PIC32MZ EF core is built on the MIPS Warrior M-class architecture, providing deterministic interrupt latency and tight C-language code density while delivering RISC-class performance. The combination of FPU and DSP extensions lets designers run control loops and signal-processing tasks simultaneously without resorting to a separate DSP chip. Dual-panel Flash allows a firmware image to be written to an inactive panel while the active panel runs, enabling fail-safe over-the-air (OTA) updates. Typical applications include industrial HMI panels with TFT-LCD graphics, motor-control and field-oriented control (FOC) drives, industrial gateways with Ethernet and USB, automotive body and connectivity modules, IoT edge nodes, and graphics/HMI touch screens. The integrated crypto engine makes it suitable for connected devices implementing TLS/DTLS and other secure boot and communication protocols. When designing with this part, plan for 2.3-3.6V supply, an external 24 MHz crystal with internal PLL to reach 200 MHz, careful decoupling on every VDD/VSS pair, and code-size overhead from the MIPS M-class toolchain. The TFBGA-100 (GJX) footprint requires a 4-layer PCB minimum with laser-drilled or micro-via capable pads for reliable assembly.

USD $9.90 재고 있음

PIC32MZ1024EFH100T-I/PF

PIC32MZ1024EFH100T-I/PF - 200MHz 32-Bit FPU MCU 1MB Flash 100-TQFP

The Microchip Technology PIC32MZ1024EFH100T-I/PF is a high-performance 32-bit MIPS Warrior M-class microcontroller with integrated IEEE 754 floating-point unit (FPU), operating at up to 200 MHz and delivering 330 DMIPS. The device integrates 1 MB (1024 KB) of Flash program memory, 512 KB of SRAM, and 160 KB of auxiliary Flash for dual-panel live update support, all housed in a 100-pin TQFP (14x14 mm, /PF) package rated for the -40C to +85C industrial temperature range. A 32-bit microcontroller (MCU) is an embedded processor that fetches, decodes, and executes 32-bit-wide instructions in a single clock cycle, delivering substantially higher throughput than 8-bit or 16-bit alternatives. Within the broader taxonomy, the PIC32MZ EF family sits at the high-performance tier of the PIC32 family, itself positioned under Microchip's MIPS-based MCU portfolio. The integrated FPU accelerates IEEE 754 single- and double-precision math without software emulation, while the four 64-bit accumulators and DSP-enhanced MAC instructions enable saturating and fractional arithmetic in a single cycle - functions that historically required external DSP chips. Key features of the PIC32MZ1024EFH100T-I/PF include a 200 MHz core, dual-panel Flash for live firmware update without downtime, hardware crypto accelerators, a 12-bit ADC with up to 40 analog input channels, dedicated DMA controllers, high-speed USB 2.0 (480 Mbps), 10/100 Ethernet MAC with IEEE 1588 support, dual CAN 2.0b ports, and multiple serial communication peripherals (UART, SPI, I2C, SQI). The integrated FPU and DSP extensions enable deterministic signal processing for motor control and audio pipelines. The architecture pairs the MIPS Warrior M-class core with tightly-coupled SRAM, prefetch cache, and a peripheral bus matrix that allows DMA-driven data movement without CPU intervention. This makes the part suitable for real-time control loops, graphics (HMI) rendering, and connectivity stacks that demand both compute headroom and deterministic IO. Typical applications include industrial automation controllers, automotive infotainment and gateway ECUs, HMI and graphical touch panels, IoT edge nodes with on-device analytics, BLDC/PMSM motor drives, and connectivity-rich embedded devices. The wide peripheral set and FPU also make it attractive for medical instrumentation and audio processing front-ends. When designing with this part, allocate sufficient decoupling on each VDD/VSS pair, follow the recommended 100-pin TQFP (14x14 mm) layout guidelines, and use the Dual Panel Flash feature to schedule fail-safe firmware updates in the field. Verify trace impedance for the USB and Ethernet high-speed signals against the device reference manual. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single source for procurement and design decisions.

USD $9.28 재고 있음

PIC32MZ1024EFH100T-I/PT

PIC32MZ1024EFH100T-I/PT - 200MHz FPU MCU, 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFH100T-I/PT is a 32-bit MIPS32 M-Class PIC32MZ microcontroller running up to 200 MHz with integrated IEEE 754 single/double-precision FPU, packed in a 100-pin TQFP (12x12 mm) package with 1 MB Flash and 512 KB SRAM. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family sits in the high-performance tier of Microchip's PIC32 portfolio, positioned between simpler PIC32MX parts and the more recent SAME70/SAM families. The EF naming convention denotes the Embedded Connectivity with Floating Point Unit family, targeting industrial, automotive (body), IoT, graphics/HMI and motor-control applications. Key features include 200 MHz / 330 DMIPS MIPS Warrior M-class core with DSP extensions, four 64-bit accumulators and single-cycle MAC, IEEE 754 compliant hardware FPU, dual-panel Flash for live firmware updates without downtime, 8-channel DMA, 12-bit 500 ksps ADC, USB 2.0 High-Speed OTG, 10/100 Ethernet MAC with RMII/MII interfaces, dual CAN 2.0b controllers, SQI (Serial Quad Interface) for external Flash, and six UART/SPI/I2C ports. The architecture combines a 5-stage pipeline MIPS32 core with a tightly-coupled instruction cache and prefetch module, allowing sustained 1.65 DMIPS/MHz. The dual-panel Flash lets one panel execute code while the other is reprogrammed - a critical feature for industrial field-upgradable systems where downtime is unacceptable. An integrated crypto accelerator is NOT present on the -EFH variants, distinguishing them from -EFK crypto-enabled SKUs. Typical applications include industrial Ethernet gateways, HMI and graphics terminals, motor control inverters, USB device/host products, automotive body-control and infotainment sub-systems, and secure-connected IoT edge nodes. Designers select this part when deterministic 200 MHz performance, large code space, and on-chip Ethernet/USB/CAN connectivity must coexist in a single IC. When designing with this device, observe Microchip's supply-voltage and decoupling recommendations from the PIC32MZ EF family datasheet, and validate thermal behaviour because 200 MHz operation at high I/O toggling rates can push junction temperatures upward. This page synthesizes verified distributor pricing, drop-in alternatives from the PIC32MZ EF family, and design notes not consolidated in the manufacturer datasheet alone.

USD $8.05 재고 있음

PIC32MZ1024EFH124-E/TL

PIC32MZ1024EFH124-E/TL - 180MHz 32-bit MCU 1MB Flash 124-VTLA

The Microchip Technology PIC32MZ1024EFH124-E/TL is a high-performance 32-bit MIPS32 M-Class microcontroller built on the PIC32MZ EF family, integrating 1 MB of Flash program memory and 512 KB of SRAM in a 124-pin VTLA (9x9 mm) surface-mount package. It runs up to 180 MHz at the E (extended) temperature grade and is designed for connected industrial, IoT, automotive, graphics/HMI, and motor-control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of on-chip peripherals such as timers, ADC/DAC, communication controllers, and DMA. Within the broader semiconductor hierarchy, an MCU belongs to the embedded-processing family (alongside DSPs and FPGAs) and typically targets deterministic, low-to-moderate-compute control tasks where software flexibility and peripheral integration outweigh raw throughput. The PIC32MZ EF family specifically targets applications that need high CPU performance plus connectivity peripherals such as Ethernet, USB, CAN, and SQI. Key features of this part include a MIPS32 M-Class core with DSP extensions, a Floating Point Unit (FPU), 16-channel DMA, hardware crypto acceleration (security engine with AES/SHA/RNG) on the EF-family die, and up to 97 configurable I/O lines. Connectivity peripherals include 10/100 Ethernet MAC with IEEE 1588 support, USB 2.0 High-Speed OTG, CAN 2.0B, SQI (Serial Quad Interface for high-speed external Flash), six UART, four SPI, five I2C, a Parallel Master Port (PMP), and an External Bus Interface (EBI). The integrated crypto block supports AES-128/192/256, SHA-1/SHA-256, and a true random number generator (TRNG), making the E suffix (no crypto) variant differentiated from the EC, EG, EH, EK, EM families. Architecturally, the device uses a 5-stage MIPS32 pipeline with branch prediction, MMU with fixed address mapping, and dedicated peripheral bus matrix for low-latency DMA. The E temperature grade supports -40C to +125C operation, which along with the wide peripheral set makes the part a strong fit for industrial networking, building automation, and connected motor drives. The EFH124 pin-count suffix indicates the 124-pin package family; the trailing /TL denotes the VTLA package with 9x9 mm body. Typical applications include Ethernet-attached industrial controllers, USB host/device gateways, automotive HMI with CAN bus, IoT edge nodes with secure firmware update, and graphical operator interfaces using the integrated PMP for TFT displays. The combination of SQI, Ethernet, USB-HS, and CAN on a single die reduces external component count. When designing with this part, allocate the 1 MB Flash carefully: ~32 KB is reserved for boot/Flash-ECC and configuration words, leaving ~992 KB for application code. Use the 512 KB SRAM for dual-image buffering if your firmware performs OTA updates, and reserve DMA channels 0-3 for time-critical peripheral streams. This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes not found in a single manufacturer datasheet.

USD $8.55 재고 있음

하위 카테고리

제품 (32725)